Download or read book Bioceramics written by W. Bonfield and published by Elsevier. This book was released on 2013-09-17 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioceramics is a collection of papers that deals in bioactive ceramics, glasses, and composites, focusing on the optimization of the implant-tissue interface. One paper discusses the osteogenic response of rat bone marrow cells in porous alumina, in hydroxyapatite, and in Kiel bone. Marrow cells loaded alumina and HA ceramics show new bone formation; Kiel bone use does not point to any consistent osteogenesis. Another paper presents the potential of an injectable form of Bioglass to treat urinary incontinence. When injected, it remains at the injection site by bonding to soft tissues without degrading, migrating, or producing an inflammatory reaction. Another paper presents an in vitro method that has shown osteoclast-like cells can resorb artificial calcium phosphate substrata in vitro. The differences in bone bonding mechanisms between surface active ceramics and resorbable ceramics show some chemical bonding and direct contact with the bone. The book also presents some clinical uses of bioactive ceramics such as the successful artificial root therapeutics involving 219 artificial roots implanted in 63 patients. This book can prove valuable to bio-chemists, cellular biologists, micro-biologists, developmental biologists, and scientists involved in biomaterials research.
Download or read book Metallurgical Coatings and Materials Surface Modifications written by H.E. Hintermann and published by Elsevier. This book was released on 1991-07-26 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contributions in this volume represent the work of over ninety international researchers from universities, government laboratories and industry, with diverse backgrounds and interests in a wide range of coatings and surface modifications processes. The seventy-three papers, including seven invited talks and thirty-eight oral communications attest to the fact that surface science and engineering is still a rapidly growing field which attracts experts from the large materials, scientific and technical community.
Download or read book Thermal Spray 2007 Global Coating Solutions Proceedings of the 2007 International Thermal Spray Conference written by Edited by Basil R. Marple, Margaret M. Hyland, Yuk-Chiu Lau, Chang-Jiu Li, Rogerio S. Lima, Ghislain Montavon and published by ASM International. This book was released on with total page 1246 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thin Films and Coatings written by Sam Zhang and published by CRC Press. This book was released on 2015-07-29 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin Films and Coatings: Toughening and Toughness Characterization captures the latest developments in the toughening of hard coatings and in the measurement of the toughness of thin films and coatings. Featuring chapters contributed by experts from Australia, China, Czech Republic, Poland, Singapore, Spain, and the United Kingdom, this book: Presents the current status of hard-yet-tough ceramic coatings Reviews various toughness evaluation methods for films and hard coatings Explores the toughness and toughening mechanisms of porous thin films and laser-treated surfaces Examines adhesions of the film/substrate interface and the characterization of coating adhesion strength Discusses nanoindentation determination of fracture toughness, resistance to cracking, and sliding contact fracture phenomena Toughening and toughness measurement (of films and coatings) are two related, yet separate, fields of great importance in today’s nanotechnology world. Thin Films and Coatings: Toughening and Toughness Characterization is a timely reference written in such a way that novices will find it a stepping stone to the field and veterans will find it a rich source of information for their research.
Download or read book Journal de Physique written by and published by . This book was released on 1991 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Plasma Spray Applications written by Hamidreza Salimi Jazi and published by BoD – Books on Demand. This book was released on 2012-03-21 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently, plasma spray has been received a large number of attentions for various type of applications due to the nature of the plasma plume and deposition structure. The plasma gas generated by the arc, consists of free electrons, ionized atoms, some neutral atoms, and undissociated diatomic molecules. The temperature of the core of the plasma jet may exceed up to 30,000 K. Gas velocity in the plasma spray torch can be varied from subsonic to supersonic using converging-diverging nozzles. Heat transfer in the plasma jet is primarily the result of the recombination of the ions and re-association of atoms in diatomic gases on the powder surfaces and absorption of radiation. Taking advantages of the plasma plume atmosphere, plasma spray can be used for surface modification and treatment, especially for activation of polymer surfaces. I addition, plasma spray can be used to deposit nanostructures as well as advanced coating structures for new applications in wear and corrosion resistance. Some state-of-the-art studies of advanced applications of plasma spraying such as nanostructure coatings, surface modifications, biomaterial deposition, and anti wear and corrosion coatings are presented in this book.
Download or read book Thermal Spray Fundamentals written by Maher I. Boulos and published by Springer Nature. This book was released on 2021-10-19 with total page 1147 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fully revised, industry-standard resource offers practical details on every aspect of the fundamentals necessary for understanding thermal spray technology, from powder all the way to the final part. The second edition is presented in a reader-friendly format that is split into four parts. Part I presents a review of thermal spray coating and its position in the broad field of surface modification technologies. Highlights of combustion and thermal plasmas are given with an expanded treatment of in-flight plasma-particle interactions. The second and third parts deal respectively with an updated presentation of thermal spray technologies and coating formation, including solution and suspension plasma spraying. The last part of the book includes a comparative analysis of different thermal spray processes, which is essential for the optimal selection of the appropriate thermal spray process in a given application. Coverage of system integration has been expanded with the addition of a detailed discussion of online instrumentation and process diagnostics and numerous examples of industrial scale spray booth designs. Attention is also given to coating finishing and health and safety issues. An extensive review is presented of thermal spray applications grouped in terms of process objectives and present use in different industrial sectors. This book will serve as an invaluable resource as a textbook for graduate courses in the field and as an exhaustive reference for professionals involved in the thermal spray field.
Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2540 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pulsed Laser Ablation written by Ion N. Mihailescu and published by CRC Press. This book was released on 2018-01-09 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pulsed laser–based techniques for depositing and processing materials are an important area of modern experimental and theoretical scientific research and development, with promising, challenging opportunities in the fields of nanofabrication and nanostructuring. Understanding the interplay between deposition/processing conditions, laser parameters, as well as material properties and dimensionality is demanding for improved fundamental knowledge and novel applications. This book introduces and discusses the basic principles of pulsed laser–matter interaction, with a focus on its peculiarities and perspectives compared to other conventional techniques and state-of-the-art applications. The book starts with an overview of the growth topics, followed by a discussion of laser–matter interaction depending on laser pulse duration, background conditions, materials, and combination of materials and structures. The information outlines the foundation to introduce examples of laser nanostructuring/processing of materials, pointing out the importance of pulsed laser–based technologies in modern (nano)science. With respect to similar texts and monographs, the book offers a comprehensive review including bottom-up and top-down laser-induced processes for nanoparticles and nanomicrostructure generation. Theoretical models are discussed by correlation with advanced experimental protocols in order to account for the fundamentals and underline physical mechanisms of laser–matter interaction. Reputed, internationally recognized experts in the field have contributed to this book. In particular, this book is suitable for a reader (graduate students as well as postgraduates and more generally researchers) new to the subject of pulsed laser ablation in order to gain physical insight into and advanced knowledge of mechanisms and processes involved in any deposition/processing experiment based on pulsed laser–matter interaction. Since knowledge in the field is given step by step comprehensively, this book serves as a valid introduction to the field as well as a foundation for further specific readings.
Download or read book Biological and Biomedical Coatings Handbook written by Sam Zhang and published by CRC Press. This book was released on 2011-05-24 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written in a versatile, contemporary style that will benefit both novice and expert alike, Biological and Biomedical Coatings Handbook, Two-Volume Set covers the state of the art in the development and implementation of advanced thin films and coatings in the biological field. Consisting of two volumes-Processing and Characterization and Applicatio
Download or read book Thermal Spray 2001 written by Christopher C. Berndt and published by ASM International. This book was released on 2001-01-01 with total page 1338 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Trends in Biomaterials Research written by Patrick J. Pannone and published by Nova Publishers. This book was released on 2007 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomaterials serve as synthetic or natural materials used to replace parts of living systems or to enhance contact with living tissue. Biomaterials are intended to interface with biological systems to evaluate, treat, augment or replace any tissue, organ or function of the body. A biomaterial is different from a biological material such as bone that is produced by a biological system. Artificial hips, vascular stents, artificial peacemakers, and catheters are all made from different biomaterials and comprise different medical devices. This book presents new approaches to biomaterial development including multi-field bone remodeling, novel strategies for conferring antibacterial properties to bone cement, polyacrylonitrile-based biomaterials for enzyme immobilisation and functionalised magnetic nanoparticles for tissue engineering.
Download or read book Bioceramic Coatings for Medical Implants written by Robert B. Heimann and published by John Wiley & Sons. This book was released on 2015-02-09 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the progress in recent years, this book provides in-depth information on the preparation, chemistry, and engineering of bioceramic coatings for medical implants. It is authored by two renowned experts with over 30 years of experience in industry and academia, who know the potentials and pitfalls of the techniques concerned. Following an introduction to the principles of biocompatibility, they present the structures and properties of various bioceramics from alumina to zirconia. The main part of the work focuses on coating technologies, such as chemical vapor deposition, sol-gel deposition and thermal spraying. There then follows a discussion of the major interactions of bioceramics with bone or tissue cells, complemented by an overview of the in-vitro testing methods of the biomineralization properties of bioceramics. The text is rounded off by chapters on the functionalization of bioceramic coatings and a look at future trends. As a result, the authors bring together all aspects of the latest techniques for designing, depositing, testing, and implementing improved and novel bioceramic coating compositions, providing a full yet concise overview for beginners and professionals.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Interfacial Effects in Particulate Fibrous and Layered Composite Materials written by T.W. Clyne and published by Trans Tech Publications Ltd. This book was released on 1995-12-04 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is extensive interest in the development of new and improved composite materials. This is particularly true of composite systems based upon metallic and ceramic constituents. As the characteristics of the interface are of central importance, there is a great incentive for an improved understanding of the nature of interfaces between constituents in such composite systems and of the factors that affect their mechanical characteristics.
Download or read book Bioscience and Bioengineering of Titanium Materials written by Yoshiki Oshida and published by Elsevier. This book was released on 2010-07-07 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book about bioscience and the bioengineering of titanium materials is based on more than 1,000 published articles. It bridges the gap between the medical/dental fields and the engineering/technology areas, due to the author's unique experience in both during the last 30 years. The book covers Materials Classifications, Chemical and Electrochemical Reactions, Oxidation, Biological Reactions, Implant-related Biological Reactions, Applications, Fabri-cation Technologies, Surface Modifications, and Future Perspectives.* Provides quick access to the primary literature in this field* Reviews studies of titanium materials in medical and dental applications, as reported in nearly 1,500 articles published over last several years* Draws information from several types of studies and reports* Helps readers answer questions about the most appropriate materials and when to use them
Download or read book Materials Processing and Manufacturing Science written by Rajiv Asthana and published by Elsevier. This book was released on 2006-01-09 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Materials Science in Manufacturing focuses on materials science and materials processing primarily for engineering and technology students preparing for careers in manufacturing. The text also serves as a useful reference on materials science for the practitioner engaged in manufacturing as well as the beginning graduate student.Integrates theoretical understanding and current practices to provide a resource for students preparing for advanced study or career in industry. Also serves as a useful resource to the practitioner who works with diverse materials and processes, but is not a specialist in materials science. This book covers a wider range of materials and processes than is customary in the elementary materials science books.This book covers a wider range of materials and processes than is customary in the elementary materials science books.* Detailed explanations of theories, concepts, principles and practices of materials and processes of manufacturing through richly illustrated text* Includes new topics such as nanomaterials and nanomanufacturing, not covered in most similar works* Focuses on the interrelationship between Materials Science, Processing Science, and Manufacturing Technology
