Download or read book The Interaction of Light with Vertically Aligned Arrays of Carbon Nanotubes written by Timothy Patrick Butler and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aligned Carbon Nanotubes written by Zhifeng Ren and published by Springer Science & Business Media. This book was released on 2012-09-05 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a survey of the physics and fabrication of carbon nanotubes and their applications in optics, electronics, chemistry and biotechnology. It focuses on the structural characterization of various carbon nanotubes, fabrication of vertically or parallel aligned carbon nanotubes on substrates or in composites, physical properties for their alignment, and applications of aligned carbon nanotubes in field emission, optical antennas, light transmission, solar cells, chemical devices, bio-devices, and many others. Major fabrication methods are illustrated in detail, particularly the most widely used PECVD growth technique on which various device integration schemes are based, followed by applications such as electrical interconnects, nanodiodes, optical antennas, and nanocoax solar cells, whereas current limitations and challenges are also be discussed to lay the foundation for future developments.
Download or read book Carbon nanotubes and graphene for photonic applications written by K.K. Chow and published by Elsevier Inc. Chapters. This book was released on 2013-08-31 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of their estimated ultra-high third-order nonlinearity, single-walled carbon nanotubes (CNTs) can be regarded as a potential new material for optical nonlinearity. The nonlinearity of CNTs is believed to originate from the inter-band transitions of the π-electrons, causing nonlinear polarization. In this respect, CNTs are similar to other organic optical materials that exhibit extremely high nonlinearity. CNT-based photonics devices offer several key advantages, including ultrafast response, robustness, tunability of wavelength, and compatibility to fibers. This chapter will describe the design and fabrication of CNT-based nonlinear photonic devices. CNTs with suitable diameters – and thus suitable operational wavelengths – are deposited or grown directly on different types of fibers or waveguides to ensure effective CNT–light interaction. Optical nonlinear effects including four-wave mixing (FWM), cross-phase modulation (XPM), and self-phase modulation (SPM) have been observed experimentally using fabricated CNT-based devices. Corresponding wavelength conversion and optical signal regeneration applications based on various nonlinear effects are discussed.
Download or read book Field emission from vertically aligned carbon nanotube arrays written by Niraj Narasinha Kulkarni and published by . This book was released on 2002 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Nanotubes and Graphene for Photonic Applications written by Shinji Yamashita and published by Elsevier. This book was released on 2013-08-31 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: The optical properties of carbon nanotubes and graphene make them potentially suitable for a variety of photonic applications. Carbon nanotubes and graphene for photonic applications explores the properties of these exciting materials and their use across a variety of applications.Part one introduces the fundamental optical properties of carbon nanotubes and graphene before exploring how carbon nanotubes and graphene are synthesised. A further chapter focusses on nonlinearity enhancement and novel preparation approaches for carbon nanotube and graphene photonic devices. Chapters in part two discuss carbon nanotubes and graphene for laser applications and highlight optical gain and lasing in carbon nanotubes, carbon nanotube and graphene-based fiber lasers, carbon-nanotube-based bulk solid-state lasers, electromagnetic nonlinearities in graphene, and carbon nanotube-based nonlinear photonic devices. Finally, part three focusses on carbon-based optoelectronics and includes chapters on carbon nanotube solar cells, a carbon nanotube-based optical platform for biomolecular detection, hybrid carbon nanotube-liquid crystal nanophotonic devices, and quantum light sources based on individual carbon nanotubes.Carbon nanotubes and graphene for photonic applications is a technical resource for materials scientists, electrical engineers working in the photonics and optoelectronics industry and academics and researchers interested in the field. - Covers the properties and fabrication of carbon nanotubes and graphene for photonic applications - Considers the uses of carbon nanotubes and graphene for laser applications - Explores numerous carbon-based light emitters and detectors
Download or read book Carbon Nanotubes written by Mohamed Berber and published by BoD – Books on Demand. This book was released on 2016-07-20 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows the recent advances of the applications of carbon nanotubes (CNTs), in particular, the polymer functionalized carbon nanotubes. It also includes a comprehensive description of carbon nanotubes' preparation, properties, and characterization. Therefore, we have attempted to provide detailed information about the polymer-carbon nanotube composites. With regard to the unique structure and properties of carbon nanotubes, a series of important findings have been reported. The unique properties of carbon nanotubes, including thermal, mechanical, and electrical properties, after polymer functionalization have been documented in detail. This book comprises 18 chapters. The chapters include different applications of polymer functionalization CNTs, e.g. photovoltaic, biomedical, drug delivery, gene delivery, stem cell therapy, thermal therapy, biological detection and imaging, electroanalytical, energy, supercapacitor, and gas sensor applications.
Download or read book Molecular Jet Growth of Carbon Nanotubes and Dense Vertically Aligned Nanotube Arrays written by and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A method of growing a carbon nanotube includes the step of impinging a beam of carbon-containing molecules onto a substrate to grow at least one carbon nanotube on the catalyst surface.
Download or read book Numerical Modeling and Characterization of Vertically Aligned Carbon Nanotube Arrays written by Johnson Joseph and published by . This book was released on 2013 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Interaction of Nanomaterials With Living Cells written by Faheem Arjamend Sheikh and published by Springer Nature. This book was released on 2023-11-10 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the interactions of nanomaterials with the biological system. The chapters of the book explore the natural and synthetic biomaterials that modulate immune responses for their applications in drug delivery and tissue engineering. Further, the book discusses the implications of the physiochemical properties of nanoparticles and their microenvironment on their interactions with biological systems. The chapters also present the recognitive capabilities of biomaterials for the development of novel strategies for the detection and treatment of autoimmune disorders. The book also introduces nanotechnology platforms for drug delivery and highlights current and emerging nanotechnologies that could enable novel classes of therapeutics. Towards the end, the book reviews the efficiency of drug-loaded nanoparticles in modulating the functioning of the biological milieu for improved disease treatment. Lastly, the book outlines the ethical issues regarding the use of nanoparticles for in vitro and in vivo applications. Given its scope, it is a valuable resource for graduate students and researchers interested in understanding the biomedical applications of nanoparticles and their interactions with the biological milieu.
Download or read book Photophysics of Carbon Nanotubes Interfaced with Organic and Inorganic Materials written by Igor A. Levitsky and published by Springer Science & Business Media. This book was released on 2012-12-22 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photophysics of Carbon Nanotubes Interfaced with Organic and Inorganic Materials describes physical, optical and spectroscopic properties of the emerging class of nanocomposites formed from carbon nanotubes (CNTs) interfacing with organic and inorganic materials. The three main chapters detail novel trends in photophysics related to the interaction of light with various carbon nanotube composites from relatively simple CNT/small molecule assemblies to complex hybrids such as CNT/Si and CNT/DNA nanostructures. The latest experimental results are followed up with detailed discussions and scientific and technological perspectives to provide a through coverage of major topics including: -Light harvesting, energy conversion, photoinduced charge separation and transport in CNT based nanohybrids -CNT/polymer composites exhibiting photoactuation; and -Optical spectroscopy and structure of CNT/DNA complexes. Including original data and a short review of recent research, Photophysics of Carbon Nanotubes Interfaced with Organic and Inorganic Materials makes this emerging field of photophysics and its applications available to academics and professionals working with carbon nanotube composites in fundamental and applied fields
Download or read book Carbon Nanotubes and Their Applications written by Qing Zhang and published by CRC Press. This book was released on 2012-04-23 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book overviews the current status of research and development activities of CNTs in nanodevices, nanomaterials, or nanofabrication. This book presents 15 state-of-the-art review articles that cover CNT synthesis technologies for growing highly orientated CNTs, chirality-pure CNTs and CNTs at a large throughput and low cost, CNT assembly techniques, CNT sorting and separation processes, CNT functionalization engineering for more functionalities, CNT fundamental properties and their practical/potential electrical, electronic, optical, mechanical, chemical and biological applications.
Download or read book Micromechanics and Nanomechanics of Composite Solids written by Shaker A. Meguid and published by Springer. This book was released on 2018-08-03 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book elucidates the most recent and highly original developments in the fields of micro- and nanomechanics and the corresponding homogenization techniques that can be reliably adopted and applied in determining the local properties, as well as the linear and nonlinear effective properties of the final architecture of these complex composite structures. Specifically, this volume, divided into three main sections—Fundamentals, Modeling, and Applications—provides recent developments in the mathematical framework of micro- and nanomechanics, including Green’s function and Eshelby’s inclusion problem, molecular mechanics, molecular dynamics, atomistic based continuum, multiscale modeling, and highly localized phenomena such as microcracks and plasticity. It is a compilation of the most recent efforts by a group of the world’s most talented and respected researchers. Ideal for graduate students in aerospace, mechanical, civil, material science, life sciences, and biomedical engineering, researchers, practicing engineers, and consultants, the book provides a unified approach in compiling micro- and nano-scale phenomena. · Elucidates recent and highly original developments in the fields of micromechanics and nanomechanics and the corresponding homogenization techniques; · Includes several new topics that are not covered in the current literature, such as micromechanics of metamaterials, electrical conductivity of CNT and graphene nanocomposites, ferroelectrics, piezoelectric, and electromagnetic materials; · Addresses highly localized phenomena such as coupled field problems, microcracks, inelasticity, dispersion of CNTs, synthesis, characterization and a number of interesting applications; · Maximizes readers’ ability to apply theories of micromechanics and nanomechanics to heterogeneous solids; · Illustrates application of micro- and nanomechanical theory to design novel composite and nanocomposite materials.
Download or read book Perspective of Carbon Nanotubes written by Hosam El-Din Saleh and published by BoD – Books on Demand. This book was released on 2019-12-11 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes belong to new nanomaterials and have been known for almost 20 years, but their history is somewhat lengthier. They have been identified as promising candidates for various applications.High-temperature preparation techniques are conventional techniques for the synthesis of carbon nanotubes using arc discharge or laser ablation, but today these methods are being replaced by low-temperature vapor deposition techniques, since orientation, alignment, nanotube length, diameter, purity, and density of carbon nanotubes can be precisely controlled. The synthesis of carbon nanotubes by chemical vapor deposition on catalyst arrays leads to nanotube models grown from specific sites on surfaces. The controlled synthesis of nanotubes opens up interesting possibilities in nanoscience and nanotechnologies, including electrical, mechanical and electromechanical properties and devices, chemical functionalization, surface chemistry and photochemistry, molecular sensors, and interfacing with moderate biological systems.Carbon nanotubes are used in many applications due to their unique electrical, mechanical, optical, thermal, and other properties. Conductive and high-strength composite materials, energy saving and energy conversion devices, sensors, visualization of field emissions and sources of radiation, means for storing hydrogen, and nanoscale semiconductor devices, probes, and interconnections are some of the many applications of carbon nanotubes.
Download or read book Photoconductivity of Aligned Carbon Nanotube Fibers written by Ye Liu and published by ProQuest. This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes (CNTs) are of great interest in today's research, and more and more researchers are getting interested in what happens when they interact with photons. While a light of certain intensity (usually a laser beam) shining on a carbon nanotube composition, usually two kinds of physical responses will be observed: photoconductivity and photomechanical actuation. Though photoconductivity of single carbon nanotube and thin CNT bundles has been studied thoroughly, photoconductivity of macro scale carbon nanotube devices is expected to have properties different from a single nanotube or thin nanotube bundles, since an interaction of electrodes and nanotube devices is going to play a significant role in the generation of photoconductivity. A study of photoconductivity of unaligned carbon nanotube films has been conducted by our group previously, which has proved some of our expectation of the differences. However, due to fabrication difficulty and structure fragility, the experiment and results about photoconductivity of aligned carbon nanotube fibers introduced in this master's thesis have never been reported before. This novel study will not only further reveal the differences of photoconductivity between macro scale carbon nanotube devices and a single nanotube, but also prove our expectation of the unique properties of aligned carbon nanotube fibers. In this thesis, the author will describe a fabrication procedure for partially aligned carbon nanotube fibers and the assembly step for the samples, then reason the experimental details. After that, the result will be introduced and labored. For the photocurrent of aligned CNT fibers, a "position effect", a dependency for the frequency of incident light pulse, and a linear photocurrent-intensity curve is observed, which are similar to the responses of unaligned films. But meanwhile, unique properties such as a fast dynamic response, an even faster dynamic response with "flood light exposure", a higher quantum efficiency and a dependency on the polarization of incident light will all be revealed. These results fit in our previous prediction of the electric mechanism of the photoconductivity of aligned CNT fibers, which is based on electron-hole pair generation and subsequent separation by both the built-in voltage at the electrode-fiber contact and the electrical fields induced by external voltage source and incident light. These results have also demonstrated that the molecular desorption mechanism may not be the dominant origin of the photoconductivity, since the dynamic response we observed is much faster than this process. Another contribution of this thesis is that we obtained a relatively large quantum efficiency (~6.4%) using partially aligned carbon nanotube fibers. This demonstrates that carbon nanotubes can be utilized in potential energy conversion devices as photo-detectors or solar cells, which together with the photomechanical applications of CNT structures is suggesting a promising future in research and engineering regarding carbon nanotubes.
Download or read book Carbon Nanotube Polymer Composites written by Dimitrios Tasis and published by Royal Society of Chemistry. This book was released on 2015-11-09 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemically-modified carbon nanotubes (CNTs) exhibit a wide range of physical and chemical properties which makes them an attractive starting material for the preparation of super-strong and highly-conductive fibres and films. Much information is available across the primary literature, making it difficult to obtain an overall picture of the state-of-the-art. This volume brings together some of the leading researchers in the field from across the globe to present the potential these materials have, not only in developing and characterising novel materials but also the devices which can be fabricated from them. Topics featured in the book include Raman characterisation, industrial polymer materials, actuators and sensors and polymer reinforcement, with chapters prepared by highly-cited authors from across the globe. A valuable handbook for any academic or industrial laboratory, this book will appeal to newcomers to the field and established researchers alike.
Download or read book Carbon nanotubes and graphene for photonic applications written by B.A. Baker and published by Elsevier Inc. Chapters. This book was released on 2013-08-31 with total page 37 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes have been explored in light-harvesting and photovoltaic devices because of their unique optoelectronic properties. This chapter provides a brief description of the optoelectronic properties of carbon nanotubes, particularly single-wall carbon nanotubes (SWCNTs), and their implication in various solar cell applications including donor–acceptor solar cells, polymer solar cells, and dye-sensitized solar cells, where carbon nanotubes are utilized as photoactive materials. Carbon-nanotube-based electrodes in photovoltaic devices are also introduced. Carbon-nanotube-based light-harvesting devices are reviewed in terms of fabrication and material processing as well as performance. Finally, advanced emerging methods and the future outlook for carbon-nanotube-based solar cells are discussed.
Download or read book One Dimensional Nanostructures written by Zhiming M Wang and published by Springer Science & Business Media. This book was released on 2008-07-20 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: One-dimensional (1D) nanostructures, including nanowires, nanotubes and quantum wires, have been regarded as the most promising building blocks for nanoscale electronic and optoelectronic devices. This book presents exciting, state-of-the-art developments in synthesis and properties of 1D nanostructures with many kinds of morphologies and compositions as well as their considerable impact on spintronics, information storage, and the design of field-effect transistors.
