Download or read book The Infrared Electro Optical Systems Handbook Passive Ellectro Optical Systems written by Stephen Campana and published by . This book was released on 1993 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Infrared and Electro-Optical Systems Handbook is a joint product of the Infrared Information Analysis Center (IRIA) and the International Society for Optical Engineering (SPIE). Sponsored by the Defense Technical Information Center (DTIC), this work is an outgrowth of its predecessor, The Infrared Handbook, published in 1978. The circulation of nearly 20,000 copies is adequate testimony to its wide acceptance in the electro-optics and infrared communities. The Infrared Handbook was itself preceded by The Handbook of Military Infrared Technology. Since its original inception, new topics and technologies have emerged for which little or no reference material exists. This work is intended to update and complement the current Infrared Handbook by revision, addition of new materials, and reformatting to increase its utility. Of necessity, some material from the current book was reproduced as is, having been adjudged as being current and adequate. The 45 chapters represent most subject areas of current activity in the military, aerospace, and civilian communities and contain material that has rarely appeared so extensively in the open literature. Because the contents are in part derivatives of advanced military technology, it seemed reasonable to categorize those chapters dealing with systems in analogy to the specialty groups comprising the annual Infrared Information Symposia (IRIS), a Department of Defense (DoD) sponsored forum administered by the Infrared Information Analysis Center of the Environmental Research Institute of Michigan (ERIM); thus, the presence of chapters on active, passive, and countermeasure systems. It is organized into eight volumes. Volume 5, edited by Stephen Campana of the Naval Air Warfare Center, treats contemporary infrared passive systems such as FLIRs, IRSTs, IR line scanners, and staring array configurations.
Download or read book Passive Electro optical Systems written by Stephen B. Campana and published by . This book was released on 1996 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Infrared and Electro Optical Systems Third Edition written by Ronald G. Driggers and published by Artech House. This book was released on 2022-08-31 with total page 739 pages. Available in PDF, EPUB and Kindle. Book excerpt: This newly revised and updated edition offers a current and complete introduction to the analysis and design of Electro-Optical (EO) imaging systems. The Third Edition provides numerous updates and several new chapters including those covering Pilotage, Infrared Search and Track, and Simplified Target Acquisition Model. The principles and components of the Linear Shift-Invariant (LSI) infrared and electro-optical systems are detailed in full and help you to combine this approach with calculus and domain transformations to achieve a successful imaging system analysis. Ultimately, the steps described in this book lead to results in quantitative characterizations of performance metrics such as modulation transfer functions, minimum resolvable temperature difference, minimum resolvable contrast, and probability of object discrimination. The book includes an introduction to two-dimensional functions and mathematics which can be used to describe image transfer characteristics and imaging system components. You also learn diffraction concepts of coherent and incoherent imaging systems which show you the fundamental limits of their performance. By using the evaluation procedures contained in this desktop reference, you become capable of predicting both sensor test and field performance and quantifying the effects of component variations. The book contains over 800 time-saving equations and includes numerous analyses and designs throughout. It also includes a reference link to special website prepared by the authors that augments the book in the classroom and serves as an additional resource for practicing engineers. With its comprehensive coverage and practical approach, this is a strong resource for engineers needing a bench reference for sensor and basic scenario performance calculations. Numerous analyses and designs are given throughout the text. It is also an excellent text for upper-level students with an interest in electronic imaging systems.
Download or read book The Infrared Handbook written by Environmental Research Institute of Michigan. Infrared Information and Analysis Center and published by . This book was released on 1978 with total page 1740 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Building Electro Optical Systems written by Philip C. D. Hobbs and published by John Wiley & Sons. This book was released on 2022-01-26 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building Electro-Optical Systems In the newly revised third edition of Building Electro-Optical Systems: Making It All Work, renowned Dr. Philip C. D. Hobbs delivers a birds-eye view of all the topics you’ll need to understand for successful optical instrument design and construction. The author draws on his own work as an applied physicist and consultant with over a decade of experience in designing and constructing electro-optical systems from beginning to end. The book’s topics are chosen to allow readers in a variety of disciplines and fields to quickly and confidently decide whether a given device or technique is appropriate for their needs. Using accessible prose and intuitive organization, Building Electro-Optical Systems remains one of the most practical and solution-oriented resources available to graduate students and professionals. The newest edition includes comprehensive revisions that reflect progress in the field of electro-optical instrument design and construction since the second edition was published. It also offers approximately 350 illustrations for visually oriented learners. Readers will also enjoy: A thorough introduction to basic optical calculations, including wave propagation, detection, coherent detection, and interferometers Practical discussions of sources and illuminators, including radiometry, continuum sources, incoherent line sources, lasers, laser noise, and diode laser coherence control Explorations of optical detection, including photodetection in semiconductors and signal-to-noise ratios Full treatments of lenses, prisms, and mirrors, as well as coatings, filters, and surface finishes, and polarization Perfect for graduate students in physics, electrical engineering, optics, and optical engineering, Building Electro-Optical Systems is also an ideal resource for professional designers working in optics, electro-optics, analog electronics, and photonics.
Download or read book Electro Optics Handbook written by Ronald Waynant and published by McGraw Hill Professional. This book was released on 2000-04-06 with total page 1006 pages. Available in PDF, EPUB and Kindle. Book excerpt: All-inclusive opto electronics guide A valuable "must-have" tool for electronic and optical engineers, this Handbook is the only single-volume, tell-it-all guide to the use of optical devices and light in electronics systems. Developed by a towering figure in the field, this manual familiarizes you with UV, VUV and X-Ray lasers; visible, solid-state, semiconductor and infrared gas lasers; FEL and ultrashort laser pulses; visible and infrared optical materials; infrared and imaging detectors; optical fibers and fiber optic sensors; holography; laser spectroscopy and photochemistry; high resolution lithography for optoelectronics; and much more. In this up-to-the-minute edition you'll find new chapters on optical communications, electro-optic devices, and high intensity optical fields, in addition to extensively updated material throughout, and abundant charts, diagrams and data tables.
Download or read book Systems Engineering and Analysis of Electro Optical and Infrared Systems written by William Wolfgang Arrasmith and published by CRC Press. This book was released on 2018-10-08 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electro-optical and infrared systems are fundamental in the military, medical, commercial, industrial, and private sectors. Systems Engineering and Analysis of Electro-Optical and Infrared Systems integrates solid fundamental systems engineering principles, methods, and techniques with the technical focus of contemporary electro-optical and infrared optics, imaging, and detection methodologies and systems. The book provides a running case study throughout that illustrates concepts and applies topics learned. It explores the benefits of a solid systems engineering-oriented approach focused on electro-optical and infrared systems. This book covers fundamental systems engineering principles as applied to optical systems, demonstrating how modern-day systems engineering methods, tools, and techniques can help you to optimally develop, support, and dispose of complex, optical systems. It introduces contemporary systems development paradigms such as model-based systems engineering, agile development, enterprise architecture methods, systems of systems, family of systems, rapid prototyping, and more. It focuses on the connection between the high-level systems engineering methodologies and detailed optical analytical methods to analyze, and understand optical systems performance capabilities. Organized into three distinct sections, the book covers modern, fundamental, and general systems engineering principles, methods, and techniques needed throughout an optical system’s development lifecycle (SDLC); optical systems building blocks that provide necessary optical systems analysis methods, techniques, and technical fundamentals; and an integrated case study that unites these two areas. It provides enough theory, analytical content, and technical depth that you will be able to analyze optical systems from both a systems and technical perspective.
Download or read book The Infrared and Electro optical Systems Handbook written by J. S. Accetta and published by SPIE-International Society for Optical Engineering. This book was released on 1993 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This eight-volume set is an authoritative collection presenting state-of-the-art information on infrared and electro-optical systems. The handbook has been completely revised and updated, featuring 45 chapters written by 80 experts in IR/EO technology.
Download or read book Laser Radar written by National Research Council and published by National Academies Press. This book was released on 2014-03-14 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: In today's world, the range of technologies with the potential to threaten the security of U.S. military forces is extremely broad. These include developments in explosive materials, sensors, control systems, robotics, satellite systems, and computing power, to name just a few. Such technologies have not only enhanced the capabilities of U.S. military forces, but also offer enhanced offensive capabilities to potential adversaries - either directly through the development of more sophisticated weapons, or more indirectly through opportunities for interrupting the function of defensive U.S. military systems. Passive and active electro-optical (EO) sensing technologies are prime examples. Laser Radar considers the potential of active EO technologies to create surprise; i.e., systems that use a source of visible or infrared light to interrogate a target in combination with sensitive detectors and processors to analyze the returned light. The addition of an interrogating light source to the system adds rich new phenomenologies that enable new capabilities to be explored. This report evaluates the fundamental, physical limits to active EO sensor technologies with potential military utility; identifies key technologies that may help overcome the impediments within a 5-10 year timeframe; considers the pros and cons of implementing each existing or emerging technology; and evaluates the potential uses of active EO sensing technologies, including 3D mapping and multi-discriminate laser radar technologies.
Download or read book Infrared Technology written by A. R. Jha and published by Wiley-Interscience. This book was released on 2000 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete reference guide to the theory, design, and applications of infrared technology Rapid advances in infrared (IR), photonic, and electrooptic technologies have given rise to sophisticated sensors with important commercial, industrial, and military applications-from remote sensing, surveillance, and high-resolution TV to home security systems. This book provides scientists and engineers with a comprehensive, state-of-the-art guide to the analysis and development of IR, photonic, and electrooptical devices and systems for specific applications. Well-known industry expert A. R. Jha compiles and consolidates the latest data on IR sources and systems, presenting fully referenced technical information plus numerical examples illustrating performance parameters and design aspects for an amazingly broad array of applications. Basic IR theory is also provided. Coverage includes: * Transmission characteristics of optical signals through the atmosphere, including effects of scattering, absorption, turbulence, and diffraction * Performance characteristics and capabilities of various IR sources, including state-of-the-art laser technologies * Performance capabilities of IR detectors and focal planar arrays (FPAs) as well as passive and active IR and electronic devices * Potential and existing applications in such diverse fields as medicine, telecommunications, space research, missile systems, and defense IR signature analysis and measurement techniques
Download or read book Passive Infrared Detection written by J. Caniou and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Familiarization with the infrared world Thermal imaging systems extend human perception beyond the visible spectrum. Since their principle is based on the natural emission of energy by physical bodies, they represent today the subject of a great deal of interest in many fields, whether in the military field or in industry or in research laboratories. They can be employed to analyse physical properties of objects, such as their energy level or their surface appearance; they are also commonly used to observe scenes in particular conditions like night vision, or in order to increase the visibility range through haze and fogs. All of these applications exploit the properties of infrared radiation whose characteristics are described in this book. This is achieved in a manner which differs from other publications on the same subject in that the book is governed by the intention to progressively lead the reader to a complete understanding of the infrared. The author intends to link physical theory to each specific aspect of the elements involved in the detection process, from their physical origin up to energy mapping in a two-dimensional picture. However we thought that it was unnecessary to demonstrate again that which the reader will easily find in scientific literature, nor to write another data book. Our aim is to fill the gap between theory and practical application. The subject is vast: infrared systems combines a wide variety of disciplines and image interpretation depends on the precise understanding of various phenomena.
Download or read book Handbook of Optoelectronics Two Volume Set written by John P. Dakin and published by CRC Press. This book was released on 2010-12-12 with total page 1616 pages. Available in PDF, EPUB and Kindle. Book excerpt: A field as diverse as optoelectronics needs a reference that is equally versatile. From basic physics and light sources to devices and state-of-the-art applications, the Handbook of Optoelectronics provides comprehensive, self-contained coverage of fundamental concepts and practical applications across the entire spectrum of disciplines encompassed by optoelectronics. The handbook unifies a broad array of current research areas with a forward-looking focus on systems and applications. Beginning with an introduction to the relevant principles of physics, materials science, engineering, and optics, the book explores the details of optoelectronic devices and techniques including semiconductor lasers, optical detectors and receivers, optical fiber devices, modulators, amplifiers, integrated optics, LEDs, and engineered optical materials. Applications and systems then become the focus, with sections devoted to industrial, medical, and commercial applications, communications, imaging and displays, sensing and data processing, spectroscopic analysis, the art of practical optoelectronics, and future prospects. This extensive resource comprises the efforts of more than 70 world-renowned experts from leading industrial and academic institutions around the world and includes many references to contemporary works. Whether used as a field reference, as a research tool, or as a broad and self-contained introduction to the field, the Handbook of Optoelectronics places everything you need in a unified, conveniently organized format.
Download or read book Electro optical Components written by William D. Rogatto and published by . This book was released on 1996 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Building Electro Optical Systems written by Philip C. D. Hobbs and published by John Wiley & Sons. This book was released on 2011-09-20 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for the First Edition "Now a new laboratory bible for optics researchers has joined the list: it is Phil Hobbs's Building Electro-Optical Systems: Making It All Work." —Tony Siegman, Optics & Photonics News Building a modern electro-optical instrument may be the most interdisciplinary job in all of engineering. Be it a DVD player or a laboratory one-off, it involves physics, electrical engineering, optical engineering, and computer science interacting in complex ways. This book will help all kinds of technical people sort through the complexity and build electro-optical systems that just work, with maximum insight and minimum trial and error. Written in an engaging and conversational style, this Second Edition has been updated and expanded over the previous edition to reflect technical advances and a great many conversations with working designers. Key features of this new edition include: Expanded coverage of detectors, lasers, photon budgets, signal processing scheme planning, and front ends Coverage of everything from basic theory and measurement principles to design debugging and integration of optical and electronic systems Supplementary material is available on an ftp site, including an additional chapter on thermal Control and Chapter problems highly relevant to real-world design Extensive coverage of high performance optical detection and laser noise cancellation Each chapter is full of useful lore from the author's years of experience building advanced instruments. For more background, an appendix lists 100 good books in all relevant areas, introductory as well as advanced. Building Electro-Optical Systems: Making It All Work, Second Edition is essential reading for researchers, students, and professionals who have systems to build.
Download or read book Electro optical Imaging System Performance written by Gerald C. Holst and published by SPIE-International Society for Optical Engineering. This book was released on 1995 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated edition is a consolidation of reference material needed to design, analyze, and evaluate imaging system performance. The information is integrated from a wide range of subjects in which the analyst must be conversant: target characterization, atmospheric effects, optics, detectors, electronics, displays, and human perception of image quality. The material could otherwise only be obtained by sifting through dozens of textbooks and journal articles. Although emphasis is placed on infrared systems, the principles apply to all imaging systems operating in the visible region of the spectrum.
Download or read book Optical Design Fundamentals for Infrared Systems written by Max J. Riedl and published by SPIE Press. This book was released on 2001 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: The practical, popular 1995 tutorial has been thoroughly revised and updated, reflecting developments in technology and applications during the past decade. New chapters address wave aberrations, thermal effects, design examples, and diamond turning.
Download or read book Thermal Infrared Sensors written by Helmut Budzier and published by John Wiley & Sons. This book was released on 2011-03-29 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problems involved in designing optimal infrared (IR) measuring systems under given conditions are commensurately complex. The optical set-up and radiation conditions, the interaction between sensor and irradiation and the sensor itself, determine the operation of the sensor system. Simple calculations for solving these problems without any understanding of the causal relationships are not possible. Thermal Infrared Sensors offers a concise explanation of the basic physical and photometric fundamentals needed for the consideration of these interactions. It depicts the basics of thermal IR sensor systems and explains the manifold causal relationships between the most important effects and influences, describing the relationships between sensor parameters such as thermal and special resolution, and application conditions. This book covers: various types of thermal sensors, like thermoelectric sensor, pyroelectric sensors, microbolometers, micro-Golay cells and bimorphous sensors; basic applications for thermal sensors; noise - a limiting factor for thermal resolution and detectivity - including an outline of the mathematics and noise sources in thermal infrared sensors; the properties of IR sensor systems in conjunction with the measurement environment and application conditions; 60 examples showing calculations of real problems with real numbers, as they occur in many practical applications. This is an essential reference for practicing design and optical engineers and users of infrared sensors and infrared cameras. With this book they will be able to transform the demonstrated solutions to their own problems, find ways to match their commercial IR sensors and cameras to their measurement conditions, and to tailor and optimise sensors and set-ups to particular IR measurement problems. The basic knowledge outlined in this book will give advanced undergraduate and graduate students a thorough grounding in this technology.
