Download or read book Short Fibre Reinforced Thermoplastics written by M. J. Folkes and published by Research Studies Press Limited. This book was released on 1982 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good,No Highlights,No Markup,all pages are intact, Slight Shelfwear,may have the corners slightly dented, may have slight color changes/slightly damaged spine.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Aerospace Materials written by Adrian P Mouritz and published by Elsevier. This book was released on 2012-05-23 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: The structural materials used in airframe and propulsion systems influence the cost, performance and safety of aircraft, and an understanding of the wide range of materials used and the issues surrounding them is essential for the student of aerospace engineering.Introduction to aerospace materials reviews the main structural and engine materials used in aircraft, helicopters and spacecraft in terms of their production, properties, performance and applications.The first three chapters of the book introduce the reader to the range of aerospace materials, focusing on recent developments and requirements. Following these introductory chapters, the book moves on to discuss the properties and production of metals for aerospace structures, including chapters covering strengthening of metal alloys, mechanical testing, and casting, processing and machining of aerospace metals. The next ten chapters look in depth at individual metals including aluminium, titanium, magnesium, steel and superalloys, as well as the properties and processing of polymers, composites and wood. Chapters on performance issues such as fracture, fatigue and corrosion precede a chapter focusing on inspection and structural health monitoring of aerospace materials. Disposal/recycling and materials selection are covered in the final two chapters.With its comprehensive coverage of the main issues surrounding structural aerospace materials,Introduction to aerospace materials is essential reading for undergraduate students studying aerospace and aeronautical engineering. It will also be a valuable resource for postgraduate students and practising aerospace engineers. - Reviews the main structural and engine materials used in aircraft, helicopters and space craft in terms of their properties, performance and applications - Introduces the reader to the range of aerospace materials, focusing on recent developments and requirements, and discusses the properties and production of metals for aerospace structures - Chapters look in depth at individual metals including aluminium, titanium, magnesium, steel and superalloys
Download or read book Science and Engineering of Short Fibre Reinforced Polymer Composites written by Shao-yun Fu and published by Woodhead Publishing. This book was released on 2019-08-24 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science and Engineering of Short Fibre Reinforced Polymer Composites, Second Edition, provides the latest information on the 'short fiber reinforced composites' (SFRP) that have found extensive applications in automobiles, business machines, durable consumer items, sporting goods and electrical industries due to their low cost, easy processing and superior mechanical properties over parent polymers. This updated edition presents new developments in this field of research and includes new chapters on electrical conductivity, structural monitoring, functional properties, self-healing, finite element method techniques, multi-scale SFRCs, and both modern computational and process engineering methods. - Reviews the mechanical properties and functions of short fiber reinforced polymer composites (SFRP) - Examines recent developments in the fundamental mechanisms of SFRP's - Assesses major factors affecting mechanical performance, such as stress transfer and strength - Includes new chapters on electrical conductivity, structural monitoring, functional properties, self-healing, finite element method techniques, multi-scale SFRCs, modern computational methods, and process engineering methods
Download or read book Impact Behaviour of Fibre Reinforced Composite Materials and Structures written by S. R. Reid and published by Elsevier. This book was released on 2000-10-12 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study covers impact response, damage tolerance and failure of fibre-reinforced composite materials and structures. Materials development, analysis and prediction of structural behaviour and cost-effective design all have a bearing on the impact response of composites and this book brings together for the first time the most comprehensive and up-to-date research work from leading international experts. - State of the art analysis of impact response, damage tolerance and failure of FRC materials - Distinguished contributors provide expert analysis of the most recent materials and structures - Valuable tool for R&D engineers, materials scientists and designers
Download or read book Polypropylene Handbook written by József Karger-Kocsis and published by Springer. This book was released on 2019-03-18 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book extensively reviews Polypropylene (PP), the second most widely produced thermoplastic material, having been produced for over 60 years. Its synthesis, processing and application are still accompanied by vigorous R&D developments because the properties of PP are at the borderline between those of commodity and engineering thermoplastics. Readers are introduced to various tacticities and polymorphs of PP, and their effects on structural properties. Further, the book addresses the control of optical properties using nucleants, provides strategies for overcoming the limited cold/impact resistance of PP, examines in detail the effects of recycling, and presents guidelines for the property modification of PPs through foaming, filling and reinforcing with respect to target applications. Special attention is paid to descriptions and models of properties as a function of morphological variables. Last but not least, the book suggests potential practical applications of PP-based systems, especially in the packaging, appliances, building/construction, textile and automotive sectors. Each chapter, written by internationally respected scientists, reflects the current state-of-art in the respective field and offers a vital source of information for students, researchers and engineers interested in the morphology, properties, testing and modeling of PP and PP-based systems. The content is indispensable to the appropriate application of PPs and related composites.
Download or read book Failure Analysis and Fractography of Polymer Composites written by Emile Greenhalgh and published by Elsevier. This book was released on 2009-09-28 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growing use of polymer composites is leading to increasing demand for fractographic expertise. Fractography is the study of fracture surface morphologies and it gives an insight into damage and failure mechanisms, underpinning the development of physically-based failure criteria. In composites research it provides a crucial link between predictive models and experimental observations. Finally, it is vital for post-mortem analysis of failed or crashed polymer composite components, the findings of which can be used to optimise future designs.Failure analysis and fractography of polymer composites covers the following topics: methodology and tools for failure analysis; fibre-dominated failures; delamination-dominated failures; fatigue failures; the influence of fibre architecture on failure; types of defect and damage; case studies of failures due to overload and design deficiencies; case studies of failures due to material and manufacturing defects; and case studies of failures due to in-service factors.With its distinguished author, Failure analysis and fractography of polymer composites is a standard reference text for researchers working on damage and failure mechanisms in composites, engineers characterising manufacturing and in-service defects in composite structures, and investigators undertaking post-mortem failure analysis of components. The book is aimed at both academic and industrial users, specifically final year and postgraduate engineering and materials students researching composites and industry designers and engineers in aerospace, civil, marine, power and transport applications. - Examines the study of fracture surface morphologies in uderstanding composite structural behaviour - Discusses composites research and post-modern analysis of failed or crashed polymer composite components - Provides an overview of damage mechanisms, types of defect and failure criteria
Download or read book Polymer Matrix Composites and Technology written by Ru-Min Wang and published by Elsevier. This book was released on 2011-07-14 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. - Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials - Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms - Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies
Download or read book Process Structure Properties in Polymer Additive Manufacturing written by Swee Leong Sing and published by MDPI. This book was released on 2021-09-01 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) methods have grown and evolved rapidly in recent years. AM for polymers is an exciting field and has great potential in transformative and translational research in many fields, such as biomedical, aerospace, and even electronics. Current methods for polymer AM include material extrusion, material jetting, vat polymerisation, and powder bed fusion. With the promise of more applications, detailed understanding of AM—from the processability of the feedstock to the relationship between the process–structure–properties of AM parts—has become more critical. More research work is needed in material development to widen the choice of materials for polymer additive manufacturing. Modelling and simulations of the process will allow the prediction of microstructures and mechanical properties of the fabricated parts while complementing the understanding of the physical phenomena that occurs during the AM processes. In this book, state-of-the-art reviews and current research are collated, which focus on the process–structure–properties relationships in polymer additive manufacturing.
Download or read book On the anisotropic plastic behaviour of short fibre reinforced thermoplastics and its description by phenomenological material modelling written by Felix Dillenberger and published by Springer Nature. This book was released on 2019-10-21 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: A requirement for the safe design of thermoplastic parts is the ability to precisely predict mechanical behaviour by finite element simulations. Typical examples include the engineering of relevant components in automotive applications. For this purpose adequate material models are essential. In this context, the present work introduces a material modelling approach for short fibre reinforced thermoplastics (SFRTPs). SFRTP parts are processed cost-effectively by injection moulding and show a varying degree of anisotropy due to the locally inhomogeneous fibre distributions that arise during the moulding process. The presented material model considers linear-elastic behaviour and non-linear orthotropic stress-state dependent viscoplastic deformation for arbitrary fibre distributions. The constitutive equations are verified with the experiments of a PPGF30 material regarding different stress-states and orientations.
Download or read book Analysis and Performance of Fiber Composites written by Bhagwan D. Agarwal and published by Wiley-Interscience. This book was released on 1990-10-08 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Having fully established themselves as workable engineering materials, composite materials are now increasingly commonplace around the world. Serves as both a text and reference guide to the behavior of composite materials in different engineering applications. Revised for this Second Edition, the text includes a general discussion of composites as material, practical aspects of design and performance, and further analysis that will be helpful to those engaged in research on composites. Each chapter closes with references for further reading and a set of problems that will be useful in developing a better understanding of the subject.
Download or read book Defects and Damage in Composite Materials and Structures written by Rikard Benton Heslehurst and published by CRC Press. This book was released on 2014-04-21 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advantages of composite materials include a high specific strength and stiffness, formability, and a comparative resistance to fatigue cracking and corrosion. However, not forsaking these advantages, composite materials are prone to a wide range of defects and damage that can significantly reduce the residual strength and stiffness of a structure or result in unfavorable load paths. Emphasizing defect identification and restitution, Defects and Damage in Composite Materials and Structures explains how defects and damage in composite materials and structures impact composite component performance. Providing ready access to an extensive, descriptive list of defects and damage types, this must-have reference: Examines defect criticality in composite structures Recommends repair actions to restore structural integrity Discusses failure modes and mechanisms of composites due to defects Reviews NDI processes for finding and identifying defects in composite materials Relating defect detection methods to defect type, the author merges his experience in the field of in-service activities for composite airframe maintenance and repair with indispensable reports and articles on defects and damage in advanced composite materials from the last 50 years.
Download or read book Deformation Kinetics written by A. S. Krausz and published by Wiley-Interscience. This book was released on 1975 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Materials by Design written by and published by . This book was released on 1988 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flow Induced Alignment in Composite Materials written by T.D. Papathanasiou and published by Woodhead Publishing. This book was released on 2021-10-19 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of aligning short fibers in a fiber-reinforced material is to improve the mechanical properties of the resulting composite. Aligning the fibers, generally in a preferred direction, allows them to contribute as much as possible to reinforcing the material. The first edition of this book detailed, in a single volume, the science, processing, applications, characterization and properties of composite materials reinforced with short fibers that have been orientated in a preferred direction by flows arising during processing. The technology of fiber-reinforced composites is continually evolving and this new edition provides timely and much needed information about this important class of engineering materials. Each of the original chapters have been brought fully up-to-date and new developments such as: the advent of nano-composites and the issues relating to their alignment; the wider use of long-fiber composites and the appearance of models able to capture their orientation during flow; the wider use of flows in micro-channels in the context of composites fabrication; and the increase in computing power, which has made relevant simulations (especially coupling flow kinematics to fiber content and orientation) much easier to perform are all covered in detail. The book will be an essential up-to-date reference resource for materials scientists, students, and engineers who are working in the relevant areas of particulate composites, short fiber-reinforced composites or nanocomposites. - Presents recent progress on flow-induced alignment, modelling and design of fiber and particulate filled polymer composites - Discusses important advances such as alignment of CNTs in polymer nanocomposites and molecular alignment of polymers induced by the injection molding process in the presence of fillers such as short fibers - Presents fiber interaction/diffusion modelling and also the fiber flexure/breakage models
Download or read book Index to Theses with Abstracts Accepted for Higher Degrees by the Universities of Great Britain and Ireland and the Council for National Academic Awards written by and published by . This book was released on 1998 with total page 922 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theses on any subject submitted by the academic libraries in the UK and Ireland.
Download or read book Machining of Polymer Composites written by Jamal Ahmad and published by Springer Science & Business Media. This book was released on 2009-04-21 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This excellent volume will serve as an indispensable reference and source book for process design, tool and production engineers in composite manufacturing. It provides the reader with a comprehensive treatment of the theory of machining as it applies to fiber reinforced polymer composites. It covers the latest technical advances in the area of machining and tooling, and discusses the applications of fiber reinforced polymer composites in the aircraft and automotive industries.
