Download or read book The Improvement of the Engineering Properties of Soft Clays with Applications in Cyprus written by Phivos A. Kyriakides and published by . This book was released on 1975 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and dis seminated by the Center for lnformation and Numerica/ Data Analysis and Synthesis (C/NDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac tivity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficia! to the academic and general scientific and technical community. After fi ve years of this joint undertaking we had concluded that it was in the interest of ali concerned if the printing and distribution of the volume were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and App/ied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. Ali back issues can also be ordered from Plenum. We have reported in Volume 21 (thesis year 1976) a total of 10,586 theses titles from 25 Canadian and 219 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work.
Download or read book Soft Clay Engineering and Ground Improvement written by Jay Ameratunga and published by CRC Press. This book was released on 2021-04-21 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soft Clay Engineering and Ground Improvement covers the design and implementation of ground improvement techniques as applicable to soft clays. This particular subject poses major geotechnical challenges in civil engineering. Not only civil engineers, but planners, architects, consultants and contractors are now aware what soft soils are and the risks associated with development of such areas. The book is designed as a reference and useful tool for those in the industry, both to consultants and contractors. It also benefits researchers and academics working on ground improvement of soft soils, and serves as an excellent overview for postgraduates. University lecturers are beginning to incorporate more ground improvement topics into their curricula, and this text would be ideal for short courses for practicing engineers. It includes several examples to assist a newcomer to carry out preliminary designs. The three authors, each with dozens of years of experience, have witnessed and participated in the rapid evolvement of ground improvement in soft soils. In addition, top-tier professionals who deal with soft clays and ground improvement on a daily basis have contributed, providing their expertise in dealing with real-world problems and practical solutions.
Download or read book Improvement on Engineering Properties of Pekan Soft Clay Treated with Hydrated Lime as a Method of Soil Stabilizer written by Nurul Zawarni Zaim and published by . This book was released on 2012 with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Soft Clay Engineering written by E.W. Brand and published by Elsevier. This book was released on 1981-01-01 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt: Richly illustrated and supplemented by numerous graphs and tables, the book is based on eleven revised and edited state-of-the-art reports originally delivered at an International Symposium on Soft Clay held in Bangkok.
Download or read book Engineering Properties of Treated Soft Clays written by Md. Mokhlesur Rahman and published by LAP Lambert Academic Publishing. This book was released on 2012-07 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents experimental and numerical investigations for the effects of cement and lime treatment on compressibility, permeability, stress-strain, strength and stiffness behaviour of three soft clays. Effects of cement treatment on physiochemical and micro-structural properties have also been investigated. X-ray Diffraction, Scanning Electron Microscopy, particle size distribution, pH measurement, organic content, electrical conductivity, cation exchange capacity, exchangeable cation, water content, unit weight, specific gravity, and Atterberg limits tests were conducted to examine physiochemical and micro-structural properties. Compressibility and permeability properties of untreated and, cement and lime treated clays were investigated by performing one-dimensional consolidation tests. Stress-strain, strength and stiffness behaviour of untreated and, cement and lime treated clays were evaluated by performing unconfined compression tests. Consolidated drained direct shear, triaxial compression tests were also carried out to assess the strength-deformation characteristics of treated clays.
Download or read book Methods of Improving the Engineering Properties of Soft Clay written by Mohd Hairy Che Man and published by . This book was released on 2002 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Properties of a Soft Organic Clay written by Oswaldo Francisco Ripalda Nuques and published by . This book was released on 1980 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Improvement of Static and Dynamic Properties of Soft Clay Using High Pressure Jet Grout written by Ramakumar Vedula and published by . This book was released on 1995 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Soft Clay Engineering and Soft Clay Improvement written by Buddhima Indraratna and published by . This book was released on 2005 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analytical Methods in Petroleum Upstream Applications written by Cesar Ovalles and published by CRC Press. This book was released on 2015-04-02 with total page 2054 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective measurement of the composition and properties of petroleum is essential for its exploration, production, and refining; however, new technologies and methodologies are not adequately documented in much of the current literature. Analytical Methods in Petroleum Upstream Applications explores advances in the analytical methods and instrumentation that allow more accurate determination of the components, classes of compounds, properties, and features of petroleum and its fractions. Recognized experts explore a host of topics, including: A petroleum molecular composition continuity model as a context for other analytical measurements A modern modular sampling system for use in the lab or the process area to collect and control samples for subsequent analysis The importance of oil-in-water measurements and monitoring The chemical and physical properties of heavy oils, their fractions, and products from their upgrading Analytical measurements using gas chromatography and nuclear magnetic resonance (NMR) applications Asphaltene and heavy ends analysis Chemometrics and modeling approaches for understanding petroleum composition and properties to improve upstream, midstream, and downstream operations Due to the renaissance of gas and oil production in North America, interest has grown in analytical methods for a wide range of applications. The understanding provided in this text is designed to help chemists, geologists, and chemical and petroleum engineers make more accurate estimates of the crude value to specific refinery configurations, providing insight into optimum development and extraction schemes.
Download or read book Investigation on the Undrained Shear Strength of Soft Clay Mixed with Various Percentages of Lime and 6 of Silica Fume written by Kah Seng Leong and published by . This book was released on 2015 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soil stabilization can make the soils becoming more stable. This method is applying admixture on the soil. Lime stabilization enhances engineering properties of soil, including reducing the soil plasticity, increase in optimum moisture content, decrease in maximum dry density and improvement in compaction of soil. Silica fume is utilized as a pozzolanic material in the application of soil stabilization. Silica fume was once considered as non-environmental friendly. Now, it has been adopted as a binder material with cement materials for the application of the soil stabilization. In this research, the materials required are kaolin grade S300, lime and silica fume. The focus of the study is the determinations of the physical properties of the soils tested and the strength of kaolin mixed with 6 % of silica fume and various percentages (3.0 %, 5.0 %, 7.0 % and 9.0 %) of lime. Unconfined compression test is carried out on the kaolin and the mixtures of soil-lime-silica fume to investigate the effect of lime stabilization with silica fume additives on the unconfined compressive strength of the mixtures. Based on the results obtained, all soil samples are indicated as soils with medium plasticity. From 0 % to 9.0 % of lime with 6.0 % of silica fume, the decrease in the maximum dry density is by 5.92 % and the increase in the optimum moisture content is by 23.5 %. Decreases in the coefficient of permeability of the mixtures occur if compared to the coefficient of permeability of kaolin soft clay itself. The optimal percentage of lime-silica fume combination is attained at 5.0 % of lime and 6.0 % of silica fume in order to improve the shear strength of kaolin soft clay. The improvement in shear strength of this stabilized mixture is 29.83 % if compared to the shear strength of the kaolin sample. It can be concluded that lime-silica fume mixture was an effective stabilizer for improving the geotechnical properties of clayey soils.
Download or read book ICPMG2014 Physical Modelling in Geotechnics written by Christophe Gaudin and published by CRC Press. This book was released on 2019-01-08 with total page 1366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 8th International Conference on Physical Modelling in Geotechnics (ICPMG2014) was organised by the Centre for Offshore Foundation Systems at the University of Western Australia under the auspices of the Technical Committee 104 for Physical Modelling in Geotechnics of the International Society of Soil Mechanics and Geotechnical Engineering. This quadrennial conference is the traditional focal point for the physical modelling community of academics, scientists and engineers to present and exchange the latest developments on a wide range of physical modelling aspects associated with geotechnical engineering. These proceedings, together with the seven previous proceedings dating from 1988, present an inestimable collection of the technical and scientific developments and breakthroughs established over the last 25 years. These proceedings include 10 keynote lectures from scientific leaders within the physical modelling community and 160 peer-reviewed papers from 26 countries. They are organised in 14 themes, presenting the latest developments in physical modelling technology, modelling techniques and sensors, through a wide range of soil-structure interaction problems, including shallow and deep foundations, offshore geotechnics, dams and embankments, excavations and retaining structures and slope stability. Fundamental aspects of earthquake engineering, geohazards, ground reinforcements and improvements, and soil properties and behaviour are also covered, demonstrating the increasing complexity of modelling arising from state-of-the-art technological developments and increased understanding of similitude principles. A special theme on education presents the latest developments in the use of physical modelling techniques for instructing undergraduate and postgraduate students in geotechnical engineering.
Download or read book Beyond 2000 in Computational Geotechnics written by Ronald B.J. Brinkgreve and published by Routledge. This book was released on 2019-01-22 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains papers presented during the first international PLAXIS symposium. Topics covered include: general geo-technical aspects; tunnels and deep excavations, and education and research. This pack is meant for the user of the PLAXIS program, as well as engineers and researchers.
Download or read book G otechnique written by and published by . This book was released on 2002 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geotitles written by and published by . This book was released on 1990 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Deformation Characteristics of Geomaterials written by V.A. Rinaldi and published by IOS Press. This book was released on 2015-12-11 with total page 1236 pages. Available in PDF, EPUB and Kindle. Book excerpt: In November 2015, Buenos Aires, Argentina became the location of several important events for geo-professionals, with the simultaneous holding of the 6th International Symposium on Deformation Characteristics of Geomaterials, the 15th Pan-American Conference on Soil Mechanics and Geotechnical Engineering (XV PCSMGE), the 8th South American Congress on Rock Mechanics (SCRM), as well as the 22nd Argentinean Congress of Geotechnical Engineering (CAMSIGXXII). This synergy provided a unique opportunity to exchange ideas and discuss current and future practices in the areas of soil mechanics and rock mechanics, and their applications in civil, energy, environmental, and mining engineering. This book presents the proceedings of the 6th International Symposium on Deformation Characteristics of Geomaterials. As well as 118 articles selected for publication after peer review, it includes 7 lectures delivered by invited keynote speakers and the Third Bishop Lecture, delivered by Professor Herve Di Benedetto of the University of Lyon, France, who presented a reference work on the advanced testing and modeling of bituminous bounded and unbounded granular materials. The conference brought together practitioners, researchers and educators from around the world engaged in the understanding of the deformation properties of geo-materials before failure, and the small strain parameters as fundamental characteristics of geo-materials. The main topics covered by the symposium include experimental investigations from very small strains to beyond failure, including multi-physical approach; HTC M coupling behavior, characterization and modeling of various geo-materials and interfaces; and practical prediction and interpretation of ground responses: field observation and case histories.
