Download or read book The Impact Response of Carbon Epoxy Laminates Center Director s Discretionary Fund Project No 94 13 written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-23 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low velocity dropweight impact tests were conducted on carbon/epoxy laminates under various boundary conditions. The composite plates were 8-ply (+45,0, -45,90)s laminates supported in a clamped-clamped/free-free configuration with varying amounts of in-plane load, N(sub x), applied. Specimens were impacted at energies of 3.4, 4.5, and 6 Joules (2.5, 3.3, and 4.4 ft-lb). The amount of damage induced into the specimen was evaluated using instrumented impact techniques, x-ray inspection, and cross-sectional photomicroscopy. Some static identation tests were performed to examine if the impact events utilized in this study were of a quasi-static nature and also to gain insight into the shape of the deflected surface at various impact load combinations. Load-displacement curves from these tests were compared to those of the impact tests, as was damage determined from x-ray inspection. The finite element technique was used to model the impact event and determine the stress field within the laminae. Results showed that for a given impact energy level, more damage was induced into the specimen as the external in-plane load, N(sub x), was increased. The majority of damage observed consisted of back face splitting of the matrix parallel to the fibers in that ply, associated with delaminations emanating from these splits. The analysis showed qualitatively the results of impact conditions on maximum load of impact, maximum transverse deflection, and first failure mode and location. Nettles, A. T. and Hodge, A. J. Marshall Space Flight Center EPOXY MATRIX COMPOSITES; LAMINATES; IMPACT TESTS; DYNAMIC TESTS; X RAY INSPECTION; STRESS DISTRIBUTION; PLATES (STRUCTURAL MEMBERS); LOADS (FORCES); FAILURE MODES; DISPLACEMENT; DEFLECTION; DAMAGE; BOUNDARY CONDITIONS..
Download or read book The Impact Response of Carbon Epoxy Laminates Center Director s Discretionary Fund Project No 94 13 written by and published by . This book was released on 1997 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book FY 1998 Scientific and Technical Reports Articles Papers and Presentations written by and published by . This book was released on 1999 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Impact Response of Carbon epoxy Laminates written by A. T. Nettles and published by . This book was released on 1997 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low velocity dropweight impact tests were conducted on carbon/epoxy laminates under various boundary conditions. The composite plates were 8-ply (+45,0,-45,90)s laminates supported in a clamped-clamped/free-free configuration with varying amounts of in-plane load, N(sub x), applied. Specimens were impacted at energies of 3.4, 4.5, and 6 Joules (2.5, 3.3, and 4.4 ft-lb). The amount of damage induced into the specimen was evaluated using instrumented impact techniques, x-ray inspection, and cross-sectional photomicroscopy. Some static identation tests were performed to examine if the impact events utilized in this study were of a quasi-static nature and also to gain insight into the shape of the deflected surface at various impact load combinations. Load-displacement curves from these tests were compared to those of the impact tests, as was damage determined from x-ray inspection. The finite element technique was used to model the impact event and determine the stress field within the laminae. Results showed that for a given impact energy level, more damage was induced into the specimen as the external in-plane load, N(sub x), was increased. The majority of damage observed consisted of back face splitting of the matrix parallel to the fibers in that ply, associated with delaminations emanating from these splits. The analysis showed qualitatively the results of impact conditions on maximum load of impact, maximum transverse deflection, and first failure mode and location.
Download or read book The Effects of Tensile Preloads on the Impact Response of Carbon Epoxy Laminates written by AT. Nettles and published by . This book was released on 1998 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low-velocity instrumented dropweight impact tests were performed on carbon/ epoxy laminates. The composite plates were 8-ply (+45, 0, -45, 90)s laminates supported in a clamped-clamped/free-free configuration with varying amounts of in-plane load, Nx applied. The amount of damage induced into the specimen was evaluated using the instrumented impact data and X-ray inspection. Results showed that for a given impact energy level, more damage was induced into the specimen as the external in-plane load, Nx, was increased. The majorityof damage observed consisted of backface splitting of the matrix parallel to the fibers in that ply, associated with delaminations emanating from these splits. A free-edge delamination model was used to explain the type and extent of the major delaminations caused by the preload/impact combinations.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Impact Response of Carbon epoxy Laminated Plate written by Yibo Qian and published by . This book was released on 1990 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Effects of Tensile Preloads on the Impact Response of Carbon epoxy Laminates written by Alan T. Nettles and published by . This book was released on 1996 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamic Deformation Damage and Fracture in Composite Materials and Structures written by Vadim Silberschmidt and published by Elsevier. This book was released on 2022-09-15 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Deformation, Damage and Fracture in Composite Materials and Structures, Second Edition reviews various aspects of dynamic deformation, damage and fracture, mostly in composite laminates and sandwich structures, and in a broad range of application areas including aerospace, automotive, defense and sports engineering. This book examines low- and high-velocity loading and assesses shock, blast and penetrative events, and has been updated to cover important new developments such as the use of additive manufacturing to produce composites, including fiber-reinforced ones. New microstructural, experimental, theoretical, and numerical studies with advanced tools are included as well. The book also features four new chapters covering topics such as dynamic delamination, dynamic deformation and fracture in 3D-printed composites, ballistic impacts with fragmenting projectiles, and the effect of multiple impacting. - Examines dynamic deformation and fracture of composite materials, covering experimental, analytical and numerical aspects - Features four new chapters covering topics such as dynamic interfacial fracture, fracture in 3D-printed composites, ballistic impacts with fragmenting projectiles, and the effect of multiple impacting - Addresses important application areas such as aerospace, automotive, wind energy, defense and sports
Download or read book Columbia Accident Investigation Board Report written by United States. Columbia Accident Investigation Board and published by U.S. Independent Agencies and Commission. This book was released on 2003 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: CD-ROM accompanying vol. 1 contains text of vol. 1 in PDF files and six related motion picture files in Quicktime format.
Download or read book Strategic Latency Unleashed written by Zachary Davis and published by . This book was released on 2021-01-30 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world is being transformed physically and politically. Technology is the handmaiden of much of this change. But since the current sweep of global change is transforming the face of warfare, Special Operations Forces (SOF) must adapt to these circumstances. Fortunately, adaptation is in the SOF DNA. This book examines the changes affecting SOF and offers possible solutions to the complexities that are challenging many long-held assumptions. The chapters explore what has changed, what stays the same, and what it all means for U.S. SOF. The authors are a mix of leading experts in technology, business, policy, intelligence, and geopolitics, partnered with experienced special operators who either cowrote the chapters or reviewed them to ensure accuracy and relevance for SOF. Our goal is to provide insights into the changes around us and generate ideas about how SOF can adapt and succeed in the emerging operational environment.
Download or read book Impact Response and Dynamic Failure of Composites and Laminate Materials written by Jang Kyo Kim and published by Trans Tech Publications Ltd. This book was released on 1997-09-04 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: In many engineering applications of composite and laminate materials, damage and failure can be caused by impact of various types. Low-velocity impact is potentially dangerous because it can produce extensive sub-surface delamination that may not be visible on the surface. High-velocity impact produced by projectiles, shock waves and fragments from exploding ammunition is a highly dynamic event, leading to the penetration or perforation of composites. All impact damage is detrimental to the mechanical and structural performance of composites. Accurate evaluation of the damaged state, and a fundamental understanding of the effect of damage upon the resultant properties are therefore essential for the proper design and application of composite materials. The strain-rate dependence of material behavior, fracture propagation and energy-absorbing capacity are also of paramount importance from both the materials science and structural mechanics perspectives.
Download or read book High Altitude Solar Power Platform written by M. D. Bailey and published by . This book was released on 1992 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamic Failure of Composite and Sandwich Structures written by Serge Abrate and published by Springer Science & Business Media. This book was released on 2012-11-02 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a broad view of the current state of the art regarding the dynamic response of composite and sandwich structures subjected to impacts and explosions. Each chapter combines a thorough assessment of the literature with original contributions made by the authors. The first section deals with fluid-structure interactions in marine structures. The first chapter focuses on hull slamming and particularly cases in which the deformation of the structure affects the motion of the fluid during the water entry of flexible hulls. Chapter 2 presents an extensive series of tests underwater and in the air to determine the effects of explosions on composite and sandwich structures. Full-scale structures were subjected to significant explosive charges, and such results are extremely rare in the open literature. Chapter 3 describes a simple geometrical theory of diffraction for describing the interaction of an underwater blast wave with submerged structures. The second section addresses the problem of impact on laminated composite structures with chapters devoted to ballistic impacts on pre-stressed composite structures, tests developed to simulate dynamic failure in marine structures, damage mechanisms and energy absorption in low velocity impacts, perforation, the numerical simulation of intra and inter-ply damage during impact, and hail impact on laminated composites. Sandwich structures with laminated facings are considered in Section 3 with chapters dealing with the discrete modeling of honeycomb core during the indentation of sandwich structures, the behavior of fold core sandwich structures during impact, and impact on helicopter blades. The fourth section consists of two chapters presenting experimental results and numerical simulation of composite structures subjected to crash. This volume is intended for advanced undergraduate and graduate students, researchers, and engineers interested and involved in analysis and design of composite structures.
Download or read book Handbook of Fiber Optic Data Communication written by and published by Academic Press. This book was released on 2002-04-13 with total page 843 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook includes chapters on all the major industry standards, quick reference tables, helpful appendices, plus a new glossary and list of acronyms. This practical handbook can stand alone or as a companion volume to DeCusatis: Fiber Optic Data Communication: Technological Advances and Trends (February 2002, ISBN: 0-12-207892-6), which was developed in tandem with this book.* Includes emerging technologies such as Infiniband, 10 Gigabit Ethernet, and MPLS Optical Switching* Describes leading edge commercial products, including LEAF and MetroCore fibers, dense wavelength multiplexing, and Small Form Factor transceiver packages* Covers all major industry standards, often written by the same people who designed the standards themselves* Includes an expanded listing of references on the World Wide Web, plus hard-to-find references for international, homologation, and type approval requirements* Convenient tables of key optical datacom parameters and glossary with hundreds of definitions and acronyms* Industry buzzwords explained, including SAN, NAS, and MAN networking* Datacom market analysis and future projections from industry leading forecasters
Download or read book Atmosphere of Freedom written by Glenn E. Bugos and published by . This book was released on 2010 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Australian Official Journal of Trademarks written by and published by . This book was released on 1906 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:
