Download or read book The Hopper Dredge written by United States. Army. Corps of Engineers and published by . This book was released on 1954 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hopper dredges are designed to vacuum material from the sea floor through drag arms that load the material into the hold of the vessel. The cargo of mud, or sand, can then be transported to either an ocean disposal site, where the material is dropped to the bottom through openings in the bottom of the hull, or at an upland site such as a beach, or reclamation, where the material is pumped ashore by the ship. This method is most suited when excavating loose material from open areas for delivery to a distant disposal location. These vessels are generally certified to sail in coastal or ocean waters and are suited for working in rougher sea conditions beyond those suitable for other dredging plants.
Download or read book A Guide to Cost Standards for Dredging Equipment 2009 written by R. N. Bray and published by CIRIA. This book was released on 2009 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Model Study of Hopper Dredge Dragheads written by John J. Franco and published by . This book was released on 1967 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dredging for Development written by International Association of Dredging Companies and published by . This book was released on 1997 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dredging written by Richard Nicholas Bray and published by . This book was released on 2005 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effectiveness of a Sea Turtle deflecting Hopper Dredge Draghead in Port Canaveral Entrance Channel Florida written by David Arthur Nelson and published by . This book was released on 1996 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sedimentation Control to Reduce Maintenance Dredging of Navigational Facilities in Estuaries written by National Research Council and published by National Academies Press. This book was released on 1987-02-01 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stability Analysis and Nonlinear Observer Design using Takagi Sugeno Fuzzy Models written by Zsófia Lendek and published by Springer Science & Business Media. This book was released on 2010-10-27 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many problems in decision making, monitoring, fault detection, and control require the knowledge of state variables and time-varying parameters that are not directly measured by sensors. In such situations, observers, or estimators, can be employed that use the measured input and output signals along with a dynamic model of the system in order to estimate the unknown states or parameters. An essential requirement in designing an observer is to guarantee the convergence of the estimates to the true values or at least to a small neighborhood around the true values. However, for nonlinear, large-scale, or time-varying systems, the design and tuning of an observer is generally complicated and involves large computational costs. This book provides a range of methods and tools to design observers for nonlinear systems represented by a special type of a dynamic nonlinear model -- the Takagi--Sugeno (TS) fuzzy model. The TS model is a convex combination of affine linear models, which facilitates its stability analysis and observer design by using effective algorithms based on Lyapunov functions and linear matrix inequalities. Takagi--Sugeno models are known to be universal approximators and, in addition, a broad class of nonlinear systems can be exactly represented as a TS system. Three particular structures of large-scale TS models are considered: cascaded systems, distributed systems, and systems affected by unknown disturbances. The reader will find in-depth theoretic analysis accompanied by illustrative examples and simulations of real-world systems. Stability analysis of TS fuzzy systems is addressed in detail. The intended audience are graduate students and researchers both from academia and industry. For newcomers to the field, the book provides a concise introduction dynamic TS fuzzy models along with two methods to construct TS models for a given nonlinear system
Download or read book The Delft Sand Clay and Rock Cutting Model written by S.A. Miedema and published by IOS Press. This book was released on 2014-10-29 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sand, clay and rock have to be excavated for a variety of purposes, such as dredging, trenching, mining (including deep sea mining), drilling, tunnel boring and many other applications. Many excavations take place on dry land, but they are also frequently required in completely saturated conditions, and the methods necessary to accomplish them consequently vary widely. This book provides an overview of cutting theories. It begins with a generic model, valid for all types of soil (sand, clay and rock), and continues with the specifics of dry sand, water-saturated sand, clay, atmospheric rock and hyperbaric rock. Small blade angles and large blade angles are discussed for each soil type, and for each case considered the equations/model for cutting forces, power and specific energy are given. With models verified by laboratory research, principally from the Delft University of Technology, and data from other recognized sources, this book will prove an invaluable reference for anybody whose work involves major excavations of any kind.
Download or read book Hopper Dredge Disposal Techniques and Related Developments in Design and Operation written by Louis J. Mauriello and published by . This book was released on 1963 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydraulic Fill Manual written by Jan van 't Hoff and published by CRC Press. This book was released on 2012-12-18 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: Without proper hydraulic fill and suitable specialised equipment, many major infrastructure projects such as ports, airports, roads, industrial or housing projects could not be realised. Yet comprehensive information about hydraulic fill is difficult to find. This thoroughly researched book, written by noted experts, takes the reader step-by-step through the complex development of a hydraulic fill project. Up-to-date and in-depth, this manual will enable the client and his consultant to understand and properly plan a reclamation project. It provides adequate guidelines for design and quality control and allows the contractor to work within known and generally accepted guidelines and reasonable specifications. The ultimate goal is to create better-designed, more adequately specified and less costly hydraulic fill projects. The Hydraulic Fill Manual covers a range of topics such as: • The development cycle of a hydraulic fill project • How technical data are acquired and applied • The construction methods applicable to a wide variety of equipment and soil conditions, the capabilities of dredging equipment and the techniques of soil improvement • How to assess the potentials of a borrow pit • Essential environment assessment issues • The design of the hydraulic fill mass, including the boundary conditions for the design, effects of the design on its surroundings, the strength and stiffness of the fill mass, density, sensitivity to liquefaction, design considerations for special fill material such as silts, clays and carbonate sands, problematic subsoils and natural hazards • Quality control and monitoring of the fill mass and its behaviour after construction. This manual is of particular interest to clients, consultants, planning and consenting authorities, environmental advisors, contractors and civil, geotechnical, hydraulic and coastal engineers involved in dredging and land reclamation projects.
Download or read book Hopper Jetting System U S Seagoing Hopper Dredge Biddle written by and published by . This book was released on 1965 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dredges and Dredging written by Charles Prelini and published by . This book was released on 1911 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Effects of Noise on Aquatic Life written by Arthur N. Popper and published by Springer Science & Business Media. This book was released on 2012-01-26 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Second International Conference on the Effects of Noise on Aquatic Life will take place in Ireland August 15-20, 2010. The main emphasis of the conference will be on defining the current state of knowledge. However, we will also assess progress in the three years since the First conference. The Second conference will place strong emphasis on recent research results, the sharing of ideas, discussion of experimental approaches, and analysis of regulatory issues.
Download or read book American Shipping written by and published by . This book was released on 1924 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book River Mechanics written by Pierre Y. Julien and published by Cambridge University Press. This book was released on 2018-04-12 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completely updated and with three new chapters, this analysis of river dynamics is invaluable for advanced students, researchers and practitioners.
Download or read book Bulletin de L Association Internationale Permanente Des Congr s de Navigation written by and published by . This book was released on 1926 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt:
