Download or read book C H N and O in Si and Characterization and Simulation of Materials and Processes written by A. Borghesi and published by Newnes. This book was released on 2012-12-02 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing over 200 papers, this volume contains the proceedings of two symposia in the E-MRS series. Part I presents a state of the art review of the topic - Carbon, Hydrogen, Nitrogen and Oxygen in Silicon and in Other Elemental Semiconductors. There was strong representation from the industrial laboratories, illustrating that the topic is highly relevant for the semiconductor industry. The second part of the volume deals with a topic which is undergoing a process of convergence with two concerns that are more particularly application oriented. Firstly, the advanced instrumentation which, through the use of atomic force and tunnel microscopies, high resolution electron microscopy and other high precision analysis instruments, now allows for direct access to atomic mechanisms. Secondly, the technological development which in all areas of applications, particularly in the field of microelectronics and microsystems, requires as a result of the miniaturisation race, a precise mastery of the microscopic mechanisms.
Download or read book Electrical Electronics Abstracts written by and published by . This book was released on 1997 with total page 2304 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Surface Processing and Characterization written by I.W. Boyd and published by Elsevier. This book was released on 1992-03-09 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contributions in this volume reflect not only the growing understanding of the underlying mechanisms controlling the various reactions in laser surface processing, but also the potential of several developing applications of direct processing. The most notable trend in the field currently is the technique of laser ablation, which is reported in almost a quarter of the papers in this volume. Whilst by no means a new phenomenon, attention has until recent years remained in the area of lithography and UV-sensitive materials. The growth in interest lies in the use of the technique to grow multi-component thin films and multi-layers. A number of papers on the topic of process diagnostics and in-situ measurements are also included. The theme of these annual meetings is centred around the physical and chemical modification of thin films and surfaces induced by the action of photon, ion, neutral, or electron beams in a variety of environments. Consequently these proceedings provide a comprehensive and unified presentation of the latest developments in this field.
Download or read book Silicon Molecular Beam Epitaxy written by E. Kasper and published by CRC Press. This book was released on 2018-05-04 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: This subject is divided into two volumes. Volume I is on homoepitaxy with the necessary systems, techniques, and models for growth and dopant incorporation. Three chapters on homoepitaxy are followed by two chapters describing the different ways in which MBE may be applied to create insulator/Si stackings which may be used for three-dimensional circuits. The two remaining chapters in Volume I are devoted to device applications. The first three chapters of Volume II treat all aspects of heteroepitaxy with the exception of the epitaxial insulator/Si structures already treated in volume I.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Properties of Gallium Arsenide written by M. R. Brozel and published by Inst of Engineering & Technology. This book was released on 1996 with total page 981 pages. Available in PDF, EPUB and Kindle. Book excerpt: It was in 1986 that INSPEC (The Information Division of the Institution of Electrical Engineers) published the book Properties of Gallium Arsenide. Since then, major developments have taken place. This third edition is comprised of 150 specially commissioned articles contributed by experts from the USA, Europe and Japan.
Download or read book Energy a Continuing Bibliography with Indexes written by and published by . This book was released on 1982 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Auger Electron Spectroscopy written by Donald T. Hawkins and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Auger electron spectroscopy is rapidly developing into the single most powerful analytical technique in basic and applied science.for investigating the chemical and structural properties of solids. Its ex plosive growth beginning in 1967 was triggered by the development of Auger analyzers capable of de tecting one atom layer of material in a fraction of a second. Continued growth was guaranteed firstly by the commercial availability of apparatus which combined the capabilities of scanning electron mi croscopy and ion-mill depth profiling with Auger analysis, and secondly by the increasing need to know the atomistics of many processes in fundamental research and engineering applications. The expanding use of Auger analysis was accompanied by an increase in the number of publications dealing with it. Because of the developing nature of Auger spectroscopy, the articles have appeared in many different sources covering diverse disciplines, so that it is extremely difficult to discover just what has or has not been subjected to Auger analysis. In this situation, a comprehensive bibliography is obviou-sly useful to those both inside and outside the field. For those in the field, this bibliography should be a wonderful time saver for locating certain references, in researching a particular topic, or when considering various aspects of instrumentation or data analysis. This bibliography not only provides the most complete listing of references pertinent to surface Auger analysis available today, but it is also a basis for extrapolating from past trends to future expectations.
Download or read book Radiative Properties of Semiconductors written by N.M. Ravindra and published by Morgan & Claypool Publishers. This book was released on 2017-08-21 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical properties, particularly in the infrared range of wavelengths, continue to be of enormous interest to both material scientists and device engineers. The need for the development of standards for data of optical properties in the infrared range of wavelengths is very timely considering the on-going transition of nano-technology from fundamental R&D to manufacturing. Radiative properties play a critical role in the processing, process control and manufacturing of semiconductor materials, devices, circuits and systems. The design and implementation of real-time process control methods in manufacturing requires the knowledge of the radiative properties of materials. Sensors and imagers operate on the basis of the radiative properties of materials. This book reviews the optical properties of various semiconductors in the infrared range of wavelengths. Theoretical and experimental studies of the radiative properties of semiconductors are presented. Previous studies, potential applications and future developments are outlined. In Chapter 1, an introduction to the radiative properties is presented. Examples of instrumentation for measurements of the radiative properties is described in Chapter 2. In Chapters 3-11, case studies of the radiative properties of several semiconductors are elucidated. The modeling and applications of these properties are explained in Chapters 12 and 13, respectively. In Chapter 14, examples of the global infrastructure for these measurements are illustrated.
Download or read book Analytical Techniques for the Characterization of Compound Semiconductors written by Gerald Bastard and published by North Holland. This book was released on 1991 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is a collection of 96 papers presented at the above Conference. The scope of the work includes optical and electrical methods as well as techniques for structural and compositional characterization. The contributed papers report on topics such as X-ray diffraction, TEM, depth profiling, photoluminescence, Raman scattering and various electrical methods. Of particular interest are combinations of different techniques providing complementary information. The compound semiconductors reviewed belong mainly to the III-V and III-VI families. The papers in this volume will provide a useful reference on the implications of new technologies in the characterization of compound semiconductors.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1990 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NBS Special Publication written by and published by . This book was released on 1968 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Publications written by United States. National Bureau of Standards and published by . This book was released on 1975 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Publications of the National Bureau of Standards written by United States. National Bureau of Standards and published by . This book was released on 1974 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Publications of the National Bureau of Standards Catalog written by United States. National Bureau of Standards and published by . This book was released on 1974 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Publications of the National Institute of Standards and Technology Catalog written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 1975 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt:
