Download or read book The Government Subcontractor s Guide to Terms and Conditions written by Kenneth R. Segel and published by Berrett-Koehler Publishers. This book was released on 2008-10 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Navigating Contract Terms and Conditions Just Got Easier! Organizations are at risk when contract terms and conditions are not fully understood. The Government Subcontractor's Guide to Terms and Conditions quickly guides you through the process of reviewing and negotiating contracts, identifying terms and conditions of concern, and mitigating potential risks. Author Kenneth Segel has tapped over 20 years of contract experience to write a handbook that walks even the most junior contracts administrator through the daunting task of reviewing and negotiating a government contractor's terms and conditions. This critical resource will help you • Determine what specific terms and conditions to address • Distinguish between a favorable and an unfavorable provision • Address potentially damaging provisions • Understand the potential economic impact of indemnification provisions • Apply risk management to address indemnification provisions The Government Subcontractor's Guide to Terms and Conditions will guide you through the inevitable challenges of the negotiation process. Put this updated resource to work in your organization today!
Download or read book Guide to Service Subcontract Terms and Conditions written by Keir X. Bancroft and published by . This book was released on 2020-06-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new second edition provides a framework for prime contractors and subcontractors to negotiate the terms and conditions of service subcontracts in support of federal government customers. This Guide is based on the published Federal Acquisition Regulation and Department of Defense FAR Supplement texts as of November 30, 2018.
Download or read book The Complete Guide to Government Contract Types written by Kenneth R. Segel and published by Berrett-Koehler Publishers. This book was released on 2016-04-01 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Everything You Need to Know About Government Contract Types As the world's single largest buyer of goods and services, the federal government has many ways to structure its procurements. Different situations and conditions often determine the best vehicle for a particular purchase. Contracting officers must assess a wide range of factors to determine which contract type will provide the government the best value and the least risk. The Complete Guide to Government Contract Types provides a comprehensive overview of the key government contract vehicles and types: fixed-price, cost-reimbursement, incentive, and other (which includes letter, indefinite-delivery/indefinite-quantity, and time-and-material contracts). The author first explains the selection process for contract vehicles, which is the basis for selecting the appropriate contract type for the work in question. He then presents a comprehensive, in-depth analysis of each contract type, explaining how each works best to meet certain types of requirements and conditions. This is an essential resource for both contracting officers and contractors seeking to understand and work effectively within the nuances of contract selection and compliance.
Download or read book Guide to Service Subcontract Terms and Conditions written by American Bar Association. Strategic Alliances, Teaming, and Subcontracting Committee and published by American Bar Association. This book was released on 2008 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Government Subcontractor s Guide to Terms and Conditions written by Kenneth R. Segel and published by Berrett-Koehler Publishers. This book was released on 2008-10-01 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Navigating Contract Terms and Conditions Just Got Easier! Organizations are at risk when contract terms and conditions are not fully understood. The Government Subcontractor's Guide to Terms and Conditions quickly guides you through the process of reviewing and negotiating contracts, identifying terms and conditions of concern, and mitigating potential risks. Author Kenneth Segel has tapped over 20 years of contract experience to write a handbook that walks even the most junior contracts administrator through the daunting task of reviewing and negotiating a government contractor's terms and conditions. This critical resource will help you • Determine what specific terms and conditions to address • Distinguish between a favorable and an unfavorable provision • Address potentially damaging provisions • Understand the potential economic impact of indemnification provisions • Apply risk management to address indemnification provisions The Government Subcontractor's Guide to Terms and Conditions will guide you through the inevitable challenges of the negotiation process. Put this updated resource to work in your organization today!
Download or read book The Government Contractor s Guide written by William Webb and published by Ridiculously Simple Books. This book was released on with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Are you looking to enter the world of government contracting but feeling overwhelmed by the complexity and intricacies of the process? Look no further! This comprehensive guide is designed to empower you with the knowledge, tools, and strategies necessary to navigate this unique sector and achieve success in this rewarding but challenging industry. Inside this informative and engaging book, you'll find invaluable insights into the government contracting landscape, including detailed explanations of key concepts, step-by-step instructions for navigating the procurement process, and actionable tips for positioning your business to win contracts. From exploring new markets and opportunities to understanding contract terms and conditions, this guide has you covered. Additionally, you'll benefit from real-life examples, case studies, and expert advice, all designed to help you build a solid foundation in government contracting. The friendly and conversational tone of this book makes it easy to digest complex information and apply it to your business with confidence. By delving into the topics covered in this book, you'll learn how to develop a strong brand identity, leverage digital marketing strategies, build lasting relationships with government clients, and cultivate strategic partnerships. Furthermore, you'll gain insight into the importance of continuous improvement, innovation, and staying informed on industry trends and regulations. At its core, this guide emphasizes the importance of persistence and adaptability, two essential qualities for success in the world of government contracting. By nurturing these qualities within yourself and your organization, you'll be better prepared to navigate the challenges and seize the opportunities that come your way. Whether you're an aspiring government contractor or a seasoned professional looking to expand your knowledge, this book is the ultimate resource to help you achieve your goals and unlock your full potential in this dynamic and rewarding industry. So why wait? Embark on your government contracting journey today with this invaluable guide!
Download or read book Guide to Fixed price Supply Subcontract Terms and Conditions written by and published by . This book was released on 2005 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guide to Fixed price Supply Subcontract Terms and Conditions written by and published by . This book was released on 1998 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Smith Currie Hancock s Federal Government Construction Contracts written by Thomas J. Kelleher, Jr. and published by John Wiley & Sons. This book was released on 2010-03-29 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Federal Construction Law for Construction Professionals Any firm intent on benefitting from the boom in federal government construction contracts must navigate an increasingly complicated and demanding set of laws, regulations, and practices that govern these projects and the contractors performing them. To help guide you through this maze, here is the updated edition of the easy-to-understand guide to the practical reality of these special requirements, and how managers and owners of construction industry firms can use them to effectively avoid pitfalls on current projects and compete successfully for new projects. Smith, Currie & Hancock's Federal Government Construction Contracts, Second Edition walks the reader through actual federal contracts, highlights critical clauses, and simplifies governmental and legal jargon to provide ease of use by the nonlawyer. Updates to this Second Edition include: Coverage of the newly enacted American Recovery and Reinvestment Act of 2009 Specifics of federal government grants to state and local public construction contracts New insights on Design-Build, Early Contractor Involvement (ECI), BIM, Green Construction, and Web-based project management techniques used by the federal government A revised look at the increasingly detailed business ethics and compliance program requirements for contractors and subcontractors as mandated by the federal government for its contractors A unique Web site at www.wiley.com/go/federalconstructionlaw provides the user with a Table of Acronyms and Terms commonly found in federal government contracts, an extensive list of Web sites of interest to federal government construction contractors, checklists, sample forms, as well as specifications related to innovations in project delivery By making transparent the many rights, risks, and legal responsibilities involved in a federal government construction project, Smith, Currie & Hancock's Federal Government Construction Contracts, Second Edition provides construction industry professionals—from general contractors, subcontractors, and designers to surety bond agents—with the insight and understanding they need to avoid problems and run a successful project from start to finish.
Download or read book Federal Contract Compliance Manual written by United States. Office of Federal Contract Compliance Programs and published by . This book was released on 1979 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Getting Started in Federal Contracting written by Barry L. McVay and published by . This book was released on 1984 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Getting Started in Federal Contracting written by Barry L. McVay and published by . This book was released on 1987 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition text discusses the regulations, the different types of contracts, invitations for bids, requests for proposals, the IFB and RFP format, the Commerce Business Daily, the standard form 129 and the bidders list, other contractual instruments, commercial activities, architect engineering and construction contracts, set asides and preference programs, labor laws, the major procurement offices, the General Services Administration and the Small Business Administration.
Download or read book A Dictionary of Modern Legal Usage written by Bryan A. Garner and published by Oxford University Press, USA. This book was released on 2001 with total page 990 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to legal style and usage, with practical advice on how to write clear, jargon-free legal prose. Includes style tips as well as definitions.
Download or read book The Small Business Guide to Government Contracts written by Steven J. Koprince and published by HarperChristian + ORM. This book was released on 2012-06-14 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Government law attorney Steven J. Koprince teaches you to concentrate on the crucial but complex Federal Acquisition Regulation (FAR) and other rules required for keeping contracts alive and avoiding penalties. Each year, the federal government awards billions of dollars in small-business contracts. The Small-Business Guide to Government Contracts puts a wealth of specialized legal counsel at readers’ fingertips, answering the most important compliance questions like: Is a small business really small? Who is eligible for HUBZone, 8(a), SDVO, or WOSB programs? What salaries and benefits must be offered? What ethical requirements must be followed? When does affiliation become a liability? Small-business contracts are both the lifeblood of hundreds of thousands of companies and a quagmire of red tape. No one can afford to be lax with the rules or too harried to heed them. The Small-Business Guide to Government Contracts empowers contractors to avoid missteps, meet their compliance obligations--and keep the pipeline flowing.
Download or read book Federal Contracting Answer Book written by Terrence M. O'Connor and published by Berrett-Koehler Publishers. This book was released on 2009-07 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thousands of contracting professionals have relied on the Federal Contracting Answer Book as their trusted guide to the highly regulated world of government procurement. In each edition the book has offered timely and accurate answers to the questions that arise daily in this complex field. Now in its third edition, this answer book is even more comprehensive. Written by experts who have extensive experience working in and teaching government contracting, the book includes all the latest changes and requirements. The question-and-answer format enables quick look-up and a concise presentation of the information. In this edition, new questions and answers have been added on avoiding proposal errors, debriefings, procurement vocabulary, regulatory changes, and best practices. In addition to these updates and revisions, the third edition includes new chapters on earned value management, GSA schedules, and contractor qualifications.
Download or read book Basic Guide to the National Labor Relations Act written by United States. National Labor Relations Board. Office of the General Counsel and published by U.S. Government Printing Office. This book was released on 1997 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Contracting for Services in State and Local Government Agencies written by William Sims Curry and published by CRC Press. This book was released on 2008-11-05 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: The First Complete Contracting Reference/ Textbook for State and Local Agencies Federal contracting officials have a comprehensive resource in the Federal Acquisition Regulations (FAR) to guide them through the arduous contracting process; however, until now there has been no such counterpart for state and local government agencies. Contracting for Services in State and Local Government Agencies is the first reference book of its kind specifically designed to provide state and local administrators with a concise authoritative resource on contracting for services. Draws from the best features of existing RFPs and contracts nationwide In preparation for writing this book, author William Sims Curry contacted all 50 state governments, as well a large selection of city and county governments, and asked them to participate in the development of templates for Requests for Proposals (RFPs) and service contracts. These agencies were asked to complete a questionnaire and provide copies of their RFP and service contract templates. Out of their contributions, the best features from each were incorporated into the Best Practices RFP and Service Contract, which are presented here in this volume. The templates can be readily downloaded from an included CD-ROM. These can be fully adapted to meet any specific need. In the text, both of these documents are examined, line by line, with the author explaining specific language choices. Guides you through the contracting process, step-by-step In addition to these model documents, additional techniques and tools are introduced to assist agencies in improving their services contracting programs. The book is presented in the sequence of the contracting cycle, beginning with advance contract planning and proceeding to pre-solicitation, solicitation, proposal evaluation, negotiation, and award through contract administration and closeout. By adopting the techniques in this book, state and local agencies will be able to effectively contract for services, get the best price available, and get important jobs done on time.
