Download or read book Wood Properties and Processing written by Miha Humar and published by MDPI. This book was released on 2020-05-23 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood-based materials are CO2-neutral, renewable, and considered to be environmentally friendly. The huge variety of wood species and wood-based composites allows a wide scope of creative and esthetic alternatives to materials with higher environmental impacts during production, use and disposal. Quality of wood is influenced by the genetic and environmental factors. One of the emerging uses of wood are building and construction applications. Modern building and construction practices would not be possible without use of wood or wood-based composites. The use of composites enables using wood of lower quality for the production of materials with engineered properties for specific target applications. Even more, the utilization of such reinforcing particles as carbon nanotubes and nanocellulose enables development of a new generation of composites with even better properties. The positive aspect of decomposability of waste wood can turn into the opposite when wood or wood-based materials are exposed to weathering, moisture oscillations, different discolorations, and degrading organisms. Protective measures are therefore unavoidable for many outdoor applications. Resistance of wood against different aging factors is always a combined effect of toxic or inhibiting ingredients on the one hand, and of structural, anatomical, or chemical ways of excluding moisture on the other.
Download or read book Australian Forestry written by and published by . This book was released on 2008 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Eucalyptus Plantations Research Management And Development Proceedings Of The International Symposium written by Runpeng Wei and published by World Scientific. This book was released on 2003-09-04 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains papers presented at a meeting by eucalyptus experts, scholars, consultants and company managers from different countries and regions. The authors report: (1) the most recent advances in eucalyptus research from different perspectives — genetics, breeding, cultivation techniques, soil nutrition, plantation management, wood utilization, etc.; (2) the world-wide extension and development of the cultivated eucalyptus as a strategic forest tree with great economic, environmental and social significance; (3) plantation management merging ecological, environmental and legal concerns in operations practised by the private sector; (4) new approaches to utilization of eucalyptus woods. This book also represents a successful combination of academic research and practical operation in managing commercial eucalyptus plantations.
Download or read book Canadian Journal of Forest Research written by and published by . This book was released on 2012 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Forest Genetics written by and published by . This book was released on 2002 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nondestructive Evaluation of Wood written by Forest Service (U S ) and published by Government Printing Office. This book was released on 2015 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nature's engineering of wood through genetics, wind, and weather creates a wide variability in wood as a material. Consequently, manufacture and users of wood products are frequently frustrated in dealing with the forest resource. Manufacturers sometimes argue that wood is difficult to consistently process into quality products because of the wide range of properties that exist in this raw material. Users of wood products can be equally frustrated with the performance variability found in finished products. Nondestructive evaluation (NDE) technologies have contributed significantly toward eliminating the cause of these frustrations. NDE technologies have been developed and are currently used in lumber and veneer grading programs that result in engineered materials that have consistent well-defined performance characteristics. This brief volume explores some of the processes that are used to manufacture wood, including green wood technology and provides a bit of history to wood production and its uses too. Other products that may interest you from the US Forest Service can be found at this link: https://bookstore.gpo.gov/agency/819
Download or read book New Forests written by I. S. Ferguson and published by CSIRO PUBLISHING. This book was released on 2005 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is no question that the timber industry needs to adopt sustainable practices that ensure a future for the industry. This book goes well beyond simply growing commercial tree plantations for wood production. It explores new forests that can supply environmental services such as salinity mitigation and carbon sequestration together with commercial wood production in an environment beyond the boundaries of traditional forestry. New Forests targets agricultural landscapes affected by salinity and which generally have rainfall less than 650 mm per year. The book addresses vital issues such as where tree planting might best be pursued, what species and technologies should be used for establishment and later management, how productivity can be improved, what mix of environmental services and commercial goods is optimum, and whether the likely net benefits justify the change in land use and requisite investment. While the book is focussed on the low-rainfall, agricultural, inland zone of the Murray-Darling Basin wherever possible the scope of most chapters has been expanded to synthesise generic information applicable to other regions in Australia and elsewhere. The authors provide a comprehensive account of all the issues relevant to the development of these new forests, covering soils, the bio-physical environment, water use and irrigation strategies - including the use of wastewater, silviculture, pests and diseases, wood quality and products, and economics and policy implications.
Download or read book Genetics Genomics and Breeding of Eucalypts written by Robert J. Henry and published by CRC Press. This book was released on 2014-07-08 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Eucalypts are used for the production of paper products, firewood, charcoal, potential feedstocks for bioenergy and biomaterials, as ornamentals and landscape trees, and in land rehabilitation. Eucalypt breeding is at an early stage with many plantings being only at the first stages of domestication. The relatively small genomes of these species make the application of molecular genetics approaches attractive. The application of modern genomics will accelerate the development of improved eucalypts for a wide range of uses. This book brings together diverse information on the genetics, genomics, and breeding of these important forest species.
Download or read book Eucalypt Domestication and Breeding written by Ken Eldridge and published by Oxford University Press. This book was released on 1994-08-04 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Eucalypts are being brought into cultivation as wood-producing crops throughout the warmer parts of the world. This practical book shows how to breed improved varieties, and how to select appropriate sites, with an emphasis on making the best use of the genetic resources of eucalypts. It shows how well-planned and recurrent selection and mating can ensure long-term genetic gain after suitable base populations have been assembled, affecting both the quality and quantity of the wood produced.
Download or read book The Biology of Eucalypts written by Lindsay Dixon Pryor and published by Hodder Education. This book was released on 1976 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tree Breeding and Genetics in New Zealand written by C.J.A. Shelbourne and published by Springer. This book was released on 2019-08-09 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dothistroma pini changed New Zealand commercial forestry dramatically. Tree breeding became concentrated on a very few species and development of selection methods and breeding strategies changed in response to the new challenges. Tree-Breeding and Genetics in New Zealand provides a critical historical account of the work on provenance research and tree breeding, often with the wisdom of hindsight, and it tracks the development of breeding strategy, especially for P. radiata, Douglas-fir and the most important eucalypt species, E. regnans, E. fastigata and E. nitens. The book is a compendium of abstracts and summaries of all publications and reports on tree improvement in New Zealand since the early 1950s, with added critical comment by the author on much of the work. It is intended for other tree breeders internationally, for interested NZ foresters and for graduate students studying genetics and tree breeding.
Download or read book Eucalyptus urophylla S T Blake ecology and silviculture in Vietnam written by Chaw Chaw Sein and published by CIFOR. This book was released on 2011-01-13 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual summarises information on the ecology and silviculture of the species Eucalyptus urophylla S.T. Blake, with an emphasis on Vietnam. It also encompasses growth and yield data from published sources, as well as collected from sites under smallholder industrial plantations in Binh Dinh and Phu Tho provinces, Vietnam. This manual is 1 of 5 that guide smallholder tree planting of five selected tree species in Vietnam. The other four species are: Acacia hybrid, Acacia mangium Willd, Cinnamomum parthenoxylon (Jack) Meisn and Erythrophloeum fordii Oliver.
Download or read book Pulp and Paper Chemistry and Technology written by Monica Ek and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Growing Plantation Forests written by P. W. West and published by Springer Science & Business Media. This book was released on 2013-10-21 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the scientific principles that are used throughout the world to ensure the rapid, healthy growth of forest plantations. As the population of the world increases so does the amount of wood people use. Large areas of natural forests are being cleared every year and converted to other uses. Almost as large an area of plantation forests is being established annually to replace those lost natural forests. Eventually, plantations will produce a large proportion of the wood used around the world for firewood, building, the manufacture of paper and bioenergy. Forest plantations can also provide various environmental benefits including carbon storage, rehabilitation of degraded land, serving as disposal sites for various forms of industrial or agricultural waste and enhancing biodiversity in regions that have been largely cleared for agriculture. Whatever their motivation, plantation forest growers want their plantations to be healthy and grow rapidly to achieve their purpose as soon as possible. This book discusses how this is done. It is written for a worldwide audience, from forestry professionals and scientists through to small plantation growers, and describes how plantations may be grown responsibly and profitably.
Download or read book Challenges and Opportunities for the World s Forests in the 21st Century written by Trevor Fenning and published by Springer Science & Business Media. This book was released on 2013-12-03 with total page 823 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the challenges and opportunities faced by the world’s forests posed by climate change, conservation objectives, and sustainable development needs including bioenergy, outlining the research and other efforts that are needed to understand these issues, along with the options and difficulties for dealing with them. It contains sections on sustainable forestry & conservation; forest resources worldwide; forests, forestry and climate change; the economics of forestry; tree breeding & commercial forestry; biotechnological approaches; genomic studies with forest trees; bio-energy, lignin & wood; and forest science, including ecological studies. The chapters are contributed by prominent organisations or individuals with an established record of achievement in these areas, and present their ideas on these topics with the aim of providing a ready source of information and guidance on these topics for politicians, policy makers and scientists for many years to come.
Download or read book The Management of Industrial Forest Plantations written by José G. Borges and published by Springer. This book was released on 2014-09-01 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Management of Industrial Forest Plantations. Theoretical Foundations and Applications provides a synthesis of current knowledge about industrial forestry management planning processes. It covers components of the forest supply chain ranging from modelling techniques to management planning approaches and information and communication technology support. It may provide effective support to education, research and outreach activities that focus on forest industrial plantations management. It may contribute further to support forest managers when developing industrial plantations management plans. The book includes the discussion of applications in 26 Management Planning in Actions boxes. These applications highlight the linkage between theory and practice and the contribution of models, methods and management planning approaches to the efficiency and the effectiveness of industrial plantations management planning.
Download or read book Pest Risk Assessment of the Importation Into the United States of Unprocessed Eucalyptus Logs and Chips from South America written by and published by . This book was released on 2001 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this report, we assess the unmitigated pest risk potential of importing Eucalyptus logs and chips from South America into the United States. To do this, we estimated the likelihood and consequences of introducing representative insects and pathogens of concern. Nineteen individual pest risk assessments were prepared, eleven dealing with insects and eight with pathogens. The selected organisms were representative examples of insects and pathogens found on the foliage, on the bark, in the bark, and in the wood of Eucalyptus spp. Among the insects and pathogens assessed, eight were rated a high risk potential: purple moth (Sarsina violescens), scolytid bark and ambrosia beetles (Scolytopsis brasiliensis, Xyleborus retusus, Xyleborus biconicus, Xyleborus spp.), carpenterworm (Chilecomadia valdiviana) on Eucalyptus nitens, round-headed wood borers (Chydarteres striatus, Retrachyderes thoracicus, Trachyderes spp., Steirastoma breve, Stenodontes spinibarbis), eucalyptus longhorned borer (Phoracantha semipunctata), Botryosphaeria cankers (Botryosphaeria dothidea, Botryosphaeria obtusa, Botryosphaeria ribi), Ceratocystis canker (Ceratocystis fimbriata), and pink disease (Erythricium salmonicolor). A moderate pest risk potential was assigned to eleven other organisms or groups of organisms: eucalypt weevils (Gonipterus spp.), carpenterworm (Chilecomadia valdiviana) on two Eucalyptus species other than E. nitens, platypodid ambrosia beetle (Megaplatypus parasulcatus), yellow phorancantha borer (Phoracantha recurva), subterranean termites (Coptotermes spp., Heterotermes spp.), foliar diseases (Aulographina eucalypti, Cryptosporiopsis eucalypti, Cylindrocladium spp., Phaeophleospora spp., Mycosphaerella spp.), eucalyptus rust (Puccinia psidii), Cryphonectria canker (Cryphonectria cubensis), Cytospora cankers (Cytospora eucalypticola, Cytospora eucalyptina), Coniothyrium canker (Coniothyrium zuluense), and root and stem rots (Armillaria spp., Phellinus spp., Ganoderma sp., Gymnopilus spectabilis). For those organisms of concern that are associated with logs and chips of South American Eucalyptus spp., specific phytosanitary measures may be required to ensure the quarantine safety of proposed importations.
