Download or read book The Future of Smart Production for SMEs written by Ole Madsen and published by Springer Nature. This book was released on 2022-10-28 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains and exemplifies how SMEs can embrace the Smart Production approach and technologies in order to gain a beneficiary outcome. The book describes the Smart Production vision for SMEs, as well as the method to get there. The concept behind the book is based on the long-term experience of the authors in researching and tackling problems of SMEs in the manufacturing sector. The book provides applied methods and obtained solutions in different branches and different sizes of SMEs, encompassing a broad survey of our markets and societies. The perspective is systemic/holistic and integrated including human, organizational, technological, and digital perspectives.

Download or read book Industry 4 0 for SMEs written by Dominik T. Matt and published by Springer Nature. This book was released on 2020-01-03 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book explores the concept of Industry 4.0, which presents a considerable challenge for the production and service sectors. While digitization initiatives are usually integrated into the central corporate strategy of larger companies, smaller firms often have problems putting Industry 4.0 paradigms into practice. Small and medium-sized enterprises (SMEs) possess neither the human nor financial resources to systematically investigate the potential and risks of introducing Industry 4.0. Addressing this obstacle, the international team of authors focuses on the development of smart manufacturing concepts, logistics solutions and managerial models specifically for SMEs. Aiming to provide methodological frameworks and pilot solutions for SMEs during their digital transformation, this innovative and timely book will be of great use to scholars researching technology management, digitization and small business, as well as practitioners within manufacturing companies.

Download or read book Implementing Industry 4 0 in SMEs written by Dominik T. Matt and published by Springer Nature. This book was released on 2021-05-08 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book addresses the practical challenges that Industry 4.0 presents for SMEs. While large companies are already responding to the changes resulting from the fourth industrial revolution , small businesses are in danger of falling behind due to the lack of examples, best practices and established methods and tools. Following on from the publication of the previous book ‘Industry 4.0 for SMEs: Challenges, Opportunities and Requirements’, the authors offer in this new book innovative results from research on smart manufacturing, smart logistics and managerial models for SMEs. Based on a large scale EU-funded research project involving seven academic institutions from three continents and a network of over fifty small and medium sized enterprises, the book reveals the methods and tools required to support the successful implementation of Industry 4.0 along with practical examples.

Download or read book Industry 4 0 for SMEs Smart Manufacturing and Logistics for SMEs written by and published by . This book was released on 2020-08-21 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Industry 4 0 in Small and Medium Sized Enterprises SMEs written by Ketan Kotecha and published by CRC Press. This book was released on 2022-03-11 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on the broader areas of Industry 4.0 as it applies to small and medium-sized enterprises (SMEs), this book offers a smooth adoption of techniques and technologies and presents advances, challenges, and opportunities for implementation. It will also enhance the role of academia by training new engineers on Industry 4.0 and digital transformation. Industry 4.0 in Small and Medium-Sized Enterprises (SMEs): Opportunities, Challenges, and Solutions presents concepts of predictive maintenance, digital factory, digital twin, additive manufacturing, and machining for sustainable development. It discusses the challenges faced by adopting Industry 4.0 including new security and privacy measures in the whole smart manufacturing setup while also explaining the impact of Industry 4.0 on Lean production systems. Implementation recommendations in the form of case studies, research studies, and the role academia can play are also provided. Practitioners, research scholars, academicians, and those studying or working in the Industry 4.0 sector will find this book of interest.

Download or read book Industry 4 0 in SMEs Across the Globe written by Julian M. Muller and published by CRC Press. This book was released on 2021-12-30 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of small and medium-sized enterprises (SMEs) digitalization is becoming more mature and stands to significantly contribute to the full development of the agenda of Industry 4.0. Although national digitalization programs have their own goals, the common focus is on the role of SMEs in global value chains. Since SMEs are known to have challenges around Industry 4.0 implementation, this book integrates experiences from 14 countries worldwide. Industry 4.0 in SMEs across the Globe: Drivers, Barriers, and Opportunities provides an in-depth overview of Industry 4.0 in SMEs, covering various national, historical, and geographical settings in nine European countries: Finland, France, Hungary, Italy, Poland, Russia, Lithuania, Serbia, and the UK, complemented by five other countries from around the world: Brazil, China, India, Iran, and the U.S. Each chapter describes the national digitalization program, along with barriers, drivers, and opportunities to implement Industry 4.0 in local SMEs. It subsumes the findings across these countries to identify common themes and clusters of drivers, barriers, and opportunities. The book concludes that there are common approaches of SMEs across the world to adopt Industry 4.0, which are to be understood to increase industrial competitiveness globally. This book is a great resource for digitalization leaders and laggards, business consultants and researchers, as well as Ph.D. and master’s students from industrial engineering and manufacturing backgrounds. Policy makers can also use the contents to better understand the commonalities and differences of national digitalization programs and further support SMEs in their digitalization process.

Download or read book Industry 4 0 written by Jesús Hamilton Ortiz and published by BoD – Books on Demand. This book was released on 2020-03-25 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows a vision of the present and future of Industry 4.0 and identifies and examines the most pressing research issue in Industry 4.0. Containing the contributions of leading researchers and academics, this book includes recent publications in key areas of interest, for example: a review on the Industry 4.0: What is the Industry 4.0, the pillars of Industry 4.0, current and future trends, technologies, taxonomy, and some case studies (A.U.T.O 4.0, stabilization of digitized process). This book also provides an essential tool in the process of migration to Industry 4.0. The book is suitable as a text for graduate students and professionals in the industrial sector and general engineering areas. The book is organized into two sections: 1. Reviews 2. Case Studies Industry 4.0 is likely to play an important role in the future society. This book is a good reference on Industry 4.0 and includes some case studies. Each chapter is written by expert researchers in the sector, and the topics are broad; from the concept or definition of Industry 4.0 to a future society 5.0.

Download or read book A Roadmap to Industry 4 0 Smart Production Sharp Business and Sustainable Development written by Anand Nayyar and published by Springer Nature. This book was released on 2019-11-27 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Business innovation and industrial intelligence are paving the way for a future in which smart factories, intelligent machines, networked processes and Big Data are combined to foster industrial growth. The maturity and growth of instrumentation, monitoring and automation as key technology drivers support Industry 4.0 as a viable, competent and actionable business model. This book offers a primer, helping readers understand this paradigm shift from industry 1.0 to industry 4.0. The focus is on grasping the necessary pre-conditions, development & technological aspects that conceptually describe this transformation, along with the practices, models and real-time experience needed to achieve sustainable smart manufacturing technologies. The primary goal is to address significant questions of what, how and why in this context, such as:What is Industry 4.0?What is the current status of its implementation?What are the pillars of Industry 4.0?How can Industry 4.0 be effectively implemented?How are firms exploiting the Internet of Things (IoT), Big Data and other emerging technologies to improve their production and services?How can the implementation of Industry 4.0 be accelerated?How is Industry 4.0 changing the workplace landscape?Why is this melding of the virtual and physical world needed for smart production engineering environments?Why is smart production a game-changing new form of product design and manufacturing?

Download or read book Challenges and Opportunities for SMEs in Industry 4 0 written by Ahmad, Noor Hazlina and published by IGI Global. This book was released on 2020-03-20 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small and medium enterprises (SMEs) have been widely acknowledged to be an important agent of development because of their potential for addressing unemployment, inequality, and poverty, as well as promoting inclusiveness in economic development. The sector is critical for achieving the country’s sustainable growth. However, there is a lack of research on the adaptations SMEs are making in today’s technologically driven market. Challenges and Opportunities for SMEs in Industry 4.0 is a collection of innovative research on the methods and applications of modern business development and innovative strategies for small and medium enterprises in the age of smart industrialism. This book features a wide range of topics including business intelligence, collaborative manufacturing, and organizational networking. This reference source is ideally designed for managers, policymakers, economists, entrepreneurs, strategists, researchers, industrialists, academicians, educators, and students.

Download or read book Implementing Industry 4 0 written by Carlos Toro and published by Springer Nature. This book was released on 2021-04-03 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book relates research being implemented in three main research areas: secure connectivity and intelligent systems, real-time analytics and manufacturing knowledge and virtual manufacturing. Manufacturing SMEs and MNCs want to see how Industry 4.0 is implemented. On the other hand, groundbreaking research on this topic is constantly growing. For the aforesaid reason, the Singapore Agency for Science, Technology and Research (A*STAR), has created the model factory initiative. In the model factory, manufacturers, technology providers and the broader industry can (i) learn how I4.0 technologies are implemented on real-world manufacturing use-cases, (ii) test process improvements enabled by such technologies at the model factory facility, without disrupting their own operations, (iii) co-develop technology solutions and (iv) support the adoption of solutions at their everyday industrial operation. The book constitutes a clear base ground not only for inspiration of researchers, but also for companies who will want to adopt smart manufacturing approaches coming from Industry 4.0 in their pathway to digitization.

Download or read book Advances in Production Management Systems Smart Manufacturing for Industry 4 0 written by Ilkyeong Moon and published by Springer. This book was released on 2018-08-24 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set IFIP AICT 535 and 536 constitutes the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2018, held in Seoul, South Korea, in August 2018. The 129 revised full papers presented were carefully reviewed and selected from 149 submissions. They are organized in the following topical sections: lean and green manufacturing; operations management in engineer-to-order manufacturing; product-service systems, customer-driven innovation and value co-creation; collaborative networks; smart production for mass customization; global supply chain management; knowledge based production planning and control; knowledge based engineering; intelligent diagnostics and maintenance solutions for smart manufacturing; service engineering based on smart manufacturing capabilities; smart city interoperability and cross-platform implementation; manufacturing performance management in smart factories; industry 4.0 - digital twin; industry 4.0 - smart factory; and industry 4.0 - collaborative cyber-physical production and human systems.

Download or read book Advances in Production Management Systems Production Management Systems for Responsible Manufacturing Service and Logistics Futures written by Erlend Alfnes and published by Springer Nature. This book was released on 2023-09-13 with total page 842 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 4-volume set, IFIP AICT 689-692, constitutes the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2023, held in Trondheim, Norway, during September 17–21, 2023. The 213 full papers presented in these volumes were carefully reviewed and selected from a total of 224 submissions. They were organized in topical sections as follows: Part I : Lean Management in the Industry 4.0 Era; Crossroads and Paradoxes in the Digital Lean Manufacturing World; Digital Transformation Approaches in Production Management; Managing Digitalization of Production Systems; Workforce Evolutionary Pathways in Smart Manufacturing Systems; Next Generation Human-Centered Manufacturing and Logistics Systems for the Operator 5.0; and SME 5.0: Exploring Pathways to the Next Level of Intelligent, Sustainable, and Human-Centered SMEs. Part II : Digitally Enabled and Sustainable Service and Operations Management in PSS Lifecycle; Exploring Digital Servitization in Manufacturing; Everything-as-a-Service (XaaS) Business Models in the Manufacturing Industry; Digital Twin Concepts in Production and Services; Experiential Learning in Engineering Education; Lean in Healthcare; Additive Manufacturing in Operations and Supply Chain Management; and Applications of Artificial Intelligence in Manufacturing. Part III : Towards Next-Generation Production and SCM in Yard and Construction Industries; Transforming Engineer-to-Order Projects, Supply Chains and Ecosystems; Modelling Supply Chain and Production Systems; Advances in Dynamic Scheduling Technologies for Smart Manufacturing; and Smart Production Planning and Control. Part IV : Circular Manufacturing and Industrial Eco-Efficiency; Smart Manufacturing to Support Circular Economy; Product Information Management and Extended Producer Responsibility; Product and Asset Life Cycle Management for Sustainable and Resilient Manufacturing Systems; Sustainable Mass Customization in the Era of Industry 5.0; Food and Bio-Manufacturing; Battery Production Development and Management; Operations and SCM in Energy-Intensive Production for a Sustainable Future; and Resilience Management in Supply Chains.

Download or read book Cognitive Assistant Supported Human Robot Collaboration written by Cecilio Angulo and published by Elsevier. This book was released on 2024-05-29 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cognitive Assistant Supported Human-Robot Collaboration covers the design and development of cognitive assistants in the smart factory era, its application domains, challenges, and current state of the art in assistance systems with collaborative robotics and IoT technologies, standards, platforms, and solutions. This book also provides a sociotechnical view of collaborative work in human-robot teams, investigating specific methods and techniques to analyze assistance systems. This will provide readers with a comprehensive overview of how cognitive assistants function and work in human-robot teams. Introduces fundamental concepts of cognitive assistants and human-robot collaboration Investigates the optimization capabilities of human-cyber physical systems Discusses planning and implementation of cognitive assistant projects Explores concepts and design elements of human collaborative workspaces

Download or read book Augmented Virtual and Mixed Reality Simulation written by Tareq Ahram and Waldemar Karwowski and published by AHFE Conference. This book was released on 2023-12-04 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the AHFE International Conference on Human Factors in Design, Engineering, and Computing (AHFE 2023 Hawaii Edition), Honolulu, Hawaii, USA 4-6, December 2023

Download or read book Towards Sustainable Customization Bridging Smart Products and Manufacturing Systems written by Ann-Louise Andersen and published by Springer Nature. This book was released on 2021-10-31 with total page 1054 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features state-of-the-art contributions from two well-established conferences: Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2020) and Mass Customization and Personalization Conference (MCPC2020). Together, they focus on the joint design, development, and management of products, production systems, and business for sustainable customization and personalization. The book covers a large range of topics within this domain, ranging from industrial success factors to original contributions within the field.

Download or read book Business Modeling and Software Design written by Boris Shishkov and published by Springer. This book was released on 2018-06-29 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 8th International Symposium on Business Modeling and Software Design, BMSD 2018, held in Vienna, Austria, in July 2018. The 14 full papers and 21 short papers selected for inclusion in this book deal with a large number of research topics: (i) Some topics concern Business Processes (BP), such as BP modeling / notations / visualizations, BP management, BP variability, BP contracting, BP interoperability, BP modeling within augmented reality, inter-enterprise collaborations, and so on; (ii) Other topics concern Software Design, such as software ecosystems, specification of context-aware software systems, service-oriented solutions and micro-service architectures, product variability, software development monitoring, and so on; (iii) Still other topics are crosscutting with regard to business modeling and software design, such as data analytics as well as information security and privacy; (iv) Other topics concern hot technology / innovation areas, such as blockchain technology and internet-of-things. Underlying with regard to all those topics is the BMSD’18 theme: Enterprise Engineering and Software Engineering - Processes and Systems for the Future.

Download or read book Advances in Production Management Systems Smart Manufacturing and Logistics Systems Turning Ideas into Action written by Duck Young Kim and published by Springer Nature. This book was released on 2022-09-18 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set, IFIP AICT 663 and 664, constitutes the thoroughly refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2022, held in Gyeongju, South Korea in September 2022. The 139 full papers presented in these volumes were carefully reviewed and selected from a total of 153 submissions. The papers of APMS 2022 are organized into two parts. The topics of special interest in the first part included: AI & Data-driven Production Management; Smart Manufacturing & Industry 4.0; Simulation & Model-driven Production Management; Service Systems Design, Engineering & Management; Industrial Digital Transformation; Sustainable Production Management; and Digital Supply Networks. The second part included the following subjects: Development of Circular Business Solutions and Product-Service Systems through Digital Twins; “Farm-to-Fork” Production Management in Food Supply Chains; Urban Mobility and City Logistics; Digital Transformation Approaches in Production Management; Smart Supply Chain and Production in Society 5.0 Era; Service and Operations Management in the Context of Digitally-enabled Product-Service Systems; Sustainable and Digital Servitization; Manufacturing Models and Practices for Eco-Efficient, Circular and Regenerative Industrial Systems; Cognitive and Autonomous AI in Manufacturing and Supply Chains; Operators 4.0 and Human-Technology Integration in Smart Manufacturing and Logistics Environments; Cyber-Physical Systems for Smart Assembly and Logistics in Automotive Industry; and Trends, Challenges and Applications of Digital Lean Paradigm.