Download or read book The Friction and Wear Characteristics of Several Wear resistant Surface Coatings written by S. E. Franklin and published by . This book was released on 1991 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Research on Tribology in Coatings and Surface Treatment written by Pakseresht, Amirhossein and published by IGI Global. This book was released on 2022-03-25 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances are continuously being made in applying the coatings and surface treatments by different techniques to reduce the damages from tribology. Engineers need more detailed information to compare the capability of each coating process in wear resistant and lubrication applications. It is also important to focus on the concepts of tribology in various applications such as the manufacturing process, bio implants, machine elements, and corrosive environments. The need for a comprehensive resource addressing these findings in order to improve wear resistance is unavoidable. The Handbook of Research on Tribology in Coatings and Surface Treatment evaluates the latest advances the fabrication of wear-resistant and lubricant coatings by different techniques and investigates wear-resistant coatings and surface treatments in various applications such as the automobile industry. Covering a wide range of topics such as lubricant coatings and wearable electronic devices, it is ideal for engineers, industry professionals, researchers, academicians, scholars, practitioners, instructors, and students.
Download or read book Tribology and Characterization of Surface Coatings written by Sarfraj Ahmed and published by John Wiley & Sons. This book was released on 2022-01-07 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRIBOLOGY AND CHARACTERIZATION OF SURFACE COATINGS The book provides updated information on the friction and wear behavior of coatings used in various industrial applications. Surface modification is a cost-effective process of increasing the life of components so that the whole device need not be changed if the surface is worn out. The tribological behavior of biological implants is currently an active topic and a thorough discussion is one of the book’s features. Tribology and Characterization of Surface Coatings explores key issues which are important in the research and development of surface coatings by providing updated information on friction and wear behavior of coatings used in different industrial applications. It covers the various coating deposition techniques, tribological response of nanocomposite coatings, multilayer hardfacing, and wear testing methods for coatings at nanoscale. The use of nanostructures may alter the tribological, characterization, and mechanical properties of the materials. Thermal spraying is the most widely used technique in industry for the deposition of coatings and their tribological properties need to be determined. This book also includes the recent trends in biotribology and the materials used in implants to counter the abrasive wear. Audience The book will serve as a reference to researchers, scientists, academicians, industrial engineers, and students who work in the fields of materials/polymer science and mechanical engineering. Apart from their applications to aerospace and electronics industries, the coatings are also used in the field of biomedical engineering.
Download or read book Coatings Tribology written by Kenneth Holmberg and published by Elsevier. This book was released on 2009-03-18 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: The surface coating field is a rapidly developing area of science and technology that offers new methods and techniques to control friction and wear. New coating types are continually being developed and the potential applications in different industrial fields are ever growing, ranging from machine components and consumer products to medical instruments and prostheses. This book provides an extensive review of the latest technology in the field, addressing techniques such as physical and chemical vapour deposition, the tribological properties of coatings, and coating characterization and performance evaluation techniques. Eleven different cases are examined in close detail to demonstrate the improvement of tribological properties and a guide to selecting coatings is also provided. This second edition is still the only monograph in the field to give a holistic view of the subject and presents all aspects, including test and performance data as well as insights into mechanisms and interactions, thus providing the level of understanding vital for the practical application of coatings. * An extensive review of the latest developments in the field of surface coatings * Presents both theory and practical applications * Includes a guide for selecting coatings
Download or read book Surface Coatings for Protection Against Wear written by B G Mellor and published by Woodhead Publishing. This book was released on 2006-05-30 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: As wear is a surface or near surface phenomenon it has long been realised that the wear resistance of a component can be improved by providing a surface of different composition from the bulk material. Although this book concentrates on surface coatings, the distinction between surface coatings and the process of modifying the surface by changing its composition is not always clear, so some useful surface modification techniques are also considered. Surface coatings for protection against wear, consists of twelve chapters written by different authors, experts in their field. After a brief introductory chapter wear phenomena and the properties required from a coating are addressed. Chapter three covers coating characterisation and property evaluation relevant to wear resistance with an emphasis on mechanical testing of coatings. The next chapter provides an introduction to the various methods available to deposit wear resistant coatings. The following six chapters describe in detail wear resistant coatings produced by various deposition routes. Emphasis is placed on the microstructure property relationship in these coatings. Chapter eleven addresses coatings and hardfacings, produced from welding processes, specifically modern developments such as friction surfacing and pulsed electrode surfacing techniques. The final chapter is dedicated to future trends in both coating materials and coating processes. Surface coatings for protection against wear is essential for anyone involved in selecting coatings and processes and will be an invaluable reference resource for all engineers and students concerned with the latest developments in coatings technology. Essential for anyone involved in selecting coatings and processes, engineers and students Written by an international team of experts in the field
Download or read book Friction Wear and Wear Protection written by Alfons Fischer and published by John Wiley & Sons. This book was released on 2011-02-10 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings collect invited and contributed papers from more than 150 scientists and engineers worldwide which provide an up-to-date overview of the current research on friction and wear, including new systematic approaches as well as innovative technical solutions.
Download or read book Coatings Tribology written by K. Holmberg and published by Elsevier. This book was released on 1994-07-15 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a general view on thin surface coatings used for tribological applications and it is based on the current state of understanding. The mechanisms of friction and wear in sliding and rolling contacts of coated surfaces are described. Basic information on coating techniques, tribology and surface mechanisms is given. Based on collected experimental works information is given on the properties of thin soft coatings, such as polymer, lamellar solid and soft metal coatings; thin hard coatings, such as nitride, carbide, oxide, boride and diamond and diamond-like coatings; and multi-component and multi-layer coatings. The influence of interface layers and lubricants is highlighted. The methods available for characterization of coated surfaces and for mechanical and chemical evaluation of their tribological properties are described. Tribological evaluation methods for accelerated and field testing and the need for standardization of quality assurance procedures are discussed. A methodology for the selection of thin coatings for tribological applications is presented and knowledge based expert system approaches for coating selection are reviewed. For different application examples, the basic tribological contact mechanisms are described and the possibilities for improving their tribological properties by using surface coatings are discussed. The application examples include sliding and rolling bearings, gears, tools for cutting and forming, erosion resistant applications, magnetic recording systems and bio-medical implants.
Download or read book Frictional and Wear Characteristics of Various Coatings Used on Small Caliber Weapon Components written by M. A. George and published by . This book was released on 1965 with total page 31 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction and wear studies, in which Springfield Armory friction and wear machine was used, were continued. Information relating to the frictional and wear properties of coatings was obtained under simulated weapon conditions. Various coatings such as phosphate, chromium plate, and hard-anodized aluminum were evaluated. The rough porous coatings such as phosphated steel and hard anodized aluminum generally had high coefficients of friction when unlubricated, but exhibited good wear resistance when lubricated. Chromium plate, when unlubricated, had a lower coefficient of friction than steel of equal surface roughness. Metallic surfaces such as chromium plate and hardened steel had limited antigalling properties. Procedure is given, and results are discussed.
Download or read book Friction and Wear of Ceramics written by Bikramjit Basu and published by John Wiley & Sons. This book was released on 2020-06-23 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the area of tribology broadly, providing important introductory chapters to fundamentals, processing, and applications of tribology. The book is designed primarily for easy and cohesive understanding for students and practicing scientists pursuing the area of tribology with focus on materials. This book helps students and practicing scientists alike understand that a comprehensive knowledge about the friction and wear properties of advanced materials is essential to further design and development of new materials. The description of the wear micromechanisms of various materials will provide a strong background to the readers as how to design and develop new tribological materials. This book also places importance on the development of new ceramic composites in the context of tribological applications. Some of the key features of the book include: Fundamentals section highlights the salient issues of ceramic processing and mechanical properties of important oxide and non-oxide ceramic systems; State of the art research findings on important ceramic composites are included and an understanding on the behavior of silicon carbide (SiC) based ceramic composites in dry sliding wear conditions is presented as a case study; Erosion wear behavior of ceramics, in which case studies on high temperature erosion behavior of SiC based composites and zirconium diboride (ZrB2) based composites is also covered; Wear behavior of ceramic coatings is rarely discussed in any tribology related books therefore a case study explaining the abrasion wear behavior of WC-Co coating is provided. Finally an appendix chapter is included in which a collection of several types of questions including multiple choice, short answer and long answer are provided.
Download or read book Friction Lubrication and Wear written by Mohammad Asaduzzaman Chowdhury and published by BoD – Books on Demand. This book was released on 2019-10-30 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology has rapidly expanded in recent years as the demand for improved materials has increased. The good function of numerous electrical, electrochemical, mechanical, and biological systems or components depends on suitable friction, lubrication, and wear as well as tribological values. In this context, the study of friction, wear, and lubrication is of tremendous pragmatic importance. The reduction of friction and loss of materials in relative motion are important challenges to improveing energy efficiency. This book guides the rational design of material for technological application. Chapters cover topics such as the resistance of dry abrasive wear, the role of a brand-new additive in the minimization of friction and wear, the structural-energy model of elastic-plastic deformation, the influence of micro-abrasive wear modes, tribological characteristics of magneto-rheological fluids (MRFs) and magneto-rheological elastomers (MREs), and different treatment technologies to improve tribological properties, among others.
Download or read book Friction and Wear in Polymer Based Materials written by V. A. Bely and published by Elsevier. This book was released on 2013-10-22 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction and Wear in Polymer-Based Materials discusses friction and wear problems in polymer-based materials. The book is organized into three parts. The chapters in Part I cover the basic laws of friction and wear in polymer-based materials. Topics covered include frictional interaction during metal-polymer contact and the influence of operating conditions on wear in polymers. The chapters in Part II discuss the structure and frictional properties of polymer-based materials; the mechanism of frictional transfer when a polymer comes into contact with polymers, metals, and other materials; and controlling the frictional properties of polymer materials. Part III is devoted to applications of polymer-based materials in friction assemblies. It covers composite self-lubricating materials and polymer materials for complexly loaded main friction assemblies. This work may prove useful to specialists interested in the problems of using polymer materials. It also aims to stimulate deeper research into the field of friction and wear in polymer-based materials.
Download or read book Surface Engineering for Corrosion and Wear Resistance written by J. R. Davis and published by ASM International. This book was released on 2001-01-01 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers are faced with a bewildering array of choices when selecting a surface treatment for a specific corrosion or wear application. This book provides practical information to help them select the best possible treatment. An entire chapter is devoted to process comparisons, and dozens of useful tables and figures compare surface treatment thickness and hardness ranges; abrasion and corrosion resistance; processing time, temperature, and pressure; costs; distortion tendencies; and other critical process factors and coating characteristics. The chapter Practical Guidelines for Surface Engin.
Download or read book Effect of Surface Coatings and Treatments on Wear written by Shyam Bahadur and published by ASTM International. This book was released on 1996 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Low Friction and Wear Resistant Coatings written by Nuno Jorge Marcolino Carvalho and published by . This book was released on 2001 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Techniques for Surface Engineering written by W. Gissler and published by Springer Science & Business Media. This book was released on 1992-10-31 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The hardest requirements on a material are in general imposed at the surface: it has to be wear resistant for tools and bearings; corrosion resistant for turbine blades; antireflecting for solar cells; and it must combine several of these properties in other applications. `Surface engineering' is the general term that incorporates all the techniques by which a surface modification can be accomplished. These techniques include both the more traditional methods, such as nitriding, boriding and carburizing, and the newer ones, such as ion implantation, laser beam melting and, in particular, coating. This book comprises and compares in a unique way all these techniques of surface engineering. It is a compilation of lectures which were held by renowned scientists and engineers in the frame of the well known `EuroCourses' of the Joint Research Centre of the Commission of the European Communities. The book is principally addressed to material and surface scientists, physicists and chemists, engineers and technicians of industries and institutes where surface engineering problems arise.
Download or read book Handbook of Tribology written by Bharat Bhushan and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook seeks to present authoritative coverage of tribology, including: physics of materials; an overview of soft, solid-lubricants and hard, wear-resistant coatings and their deposition techniques; and surface treatment techniques and the latest engineering specifications. It provides data, mostly in tabular form, on friction and wear characteristics of bulk materials, allowing the user to decide the appropriate course of action for selecting the proper coating material, as well as surface treatment techniques for maximum friction and wear reduction.
Download or read book Friction and Wear of Ceramics written by Said Jahanmir and published by CRC Press. This book was released on 1993-09-23 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides comprehensive information on the tribological aspects of advanced ceramic materials for all uses that require controlled friction and wear resistance. The text is a guide to altering the microstructure of ceramics to create optimum performance in sliding and rolling contact applications.
