Download or read book The Friction and Lubrication of Thin Film Disks with Carbon Overcoat written by Jeffrey Lawrence Streator and published by . This book was released on 1990 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CRC Handbook of Lubrication and Tribology Volume III written by E. Richard Booser and published by CRC Press. This book was released on 1993-12-21 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume III extends this handbook series to cover new developments and topics in tribology that have occurred during the past decade. It includes in-depth discussions on revolutionary magnetic bearings used in demanding applications in compressors, high-speed spindles, and aerospace equipment. Extensive coverage is given to tribology developments in office machines and in magnetic storage systems for computers. Monitoring sensors are addressed in the first chapter, followed by chapters on specific monitoring techniques for automobiles, diesels, and rotating machines. One chapter is devoted to procedures used for tracking the remaining life of lubricants. Synthetic lubricants are discussed by outstanding specialists in this rapidly developing field. Synthetics are increasingly important in widely diverse areas, including compressors using the new ozone-layer-friendly refrigerants and a variety of extreme-temperature and environmentally-sensitive applications. Water- and gas-lubricated bearings are given similar attention. The contributors also develop a new, unified coverage for fatigue life of ball and roller bearings; for design and application of porous metal bearings; for self-contained lubrication, involving oil rings, disks, and wicks; and for plastic bearings. Each of these classes of bearings are used by the millions daily throughout industry. The three-volume handbook is an essential reference to tribologists and lubrication, mechanical, and automotive engineers. It is invaluable to lubricant suppliers; bearing companies; those working in the aerospace industry; and anyone concerned with machine design, machinery wear, and maintenance.
Download or read book Thin Films in Tribology written by G. Dalmaz and published by Elsevier. This book was released on 1993-09-06 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tribological properties of relatively moving surfaces are greatly influenced by thin surface films which are of considerable importance in the design of machine components. From Victorian days when working lubricant films were calculated in tens of micrometres, to today when molecular dynamics simulations and even experiments are beginning to look at nanometre, single molecule thick films, the study of surfaces which is the tribologists' challenge has moved to finer and finer scales.The 66 papers in this volume provide reviews across the tribological field with thin films as their theme, giving a comprehensive and concise description on topics ranging from coatings and surface modification to bio-tribology. The articles provide the reader with an outline of their most effective application and potential uses in new technologies. The volume will be of interest not only to research workers and design engineers in the fields of new machine developments and lubrication, but also to engineers and students specialising in tribology.
Download or read book Tribology and Mechanics of Magnetic Storage Devices written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1035 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic recording is presently a $50 billion industry. It spans audio, video, and digi tal applications in the form of tapes and disks. The industry is expected to grow by a factor of five or more in the next decade. This growth will be accompanied by dramatic improvements in the technology, and the potential exists for magnetic-recording den sities to improve by at least one order of magnitude! Magnetic-recording process is accomplished by relative motion between a mag netic head and a magnetic medium. Types of magnetic media for digital recording are: flexible media (tapes and floppy disks) and rigid disks. Physical contact between head and medium occurs during starts and stops and hydrodynamic air film develops at high speeds. Hying heights (mean separation between head and medium) are on the order of 0. 1 micrometer comparable to surface roughness of the mating members. Need for higher and higher recording densities requires that surfaces be as smooth as possible and flying heights be as low as possible. Smoother surfaces lead to increased static/ kinetic friction and wear. In the case of magnetic tapes, in order to have high bit capac ity for a given size of a spool, we like to use as thin a tape substrate as possible. Thinner tapes are prone to local or bulk viscoelastic deformation during storage. This may lead to variations in head-tape separations resulting in problems in data reliability.
Download or read book Advances in Information Storage Systems written by Bharat Bhushan and published by World Scientific. This book was released on 1995 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Advances in Information Storage Systems covers a wide range of interdisciplinary technical areas, related to magnetic or optical storage systems. The following nonexhaustive list is indicative of the scope of the topics: Friction, Adhesion, Wear and Lubrications, Coatings, Solid Mechanics, Air Flow, Contamination, Instrumentation, Dynamics, Shock and Vibration, Controls, Head and Suspension Design, Actuators, Spindle and Actuator Motors and Bearings, Structure of Thin Films, Corrosion, Long-Term Reliability, Materials and Processing, Manufacturing and Automation, Economics.This volume contains 30 articles covering various aspects of the information storage and processing industry. It is organized into three parts: Mechanics and Tribology of Magnetic Rigid Disk Drives; Dynamics and Controls of Magnetic Rigid Disk Drives; and Mechanics of Flexible Media Systems.
Download or read book Metallurgical Coatings and Thin Films 1991 written by G.E. McGuire and published by Elsevier. This book was released on 2012-12-02 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contributions in this two-volume set represent the work of over two hundred international researchers from universities, government laboratories and industry, with diverse backgrounds and interests in a wide range of coatings and thin film processes. The two hundred and six papers attest to the fact that Metallurgical Coatings is a rapidly growing field attracting experts from the large materials, scientific and technical community. The papers will be a useful and dynamic tool for those wishing to increase their knowledge on metallurgical coatings, as well as providing a guide to recent literature in this field.
Download or read book Characterization of Tribological Materials written by William A. Glaeser and published by Momentum Press. This book was released on 2010 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the composition and structure of a surface is essential in understanding its frictional (Tribological) properties. This volume in the Materials Characterization series will focus on surface characterization, including roughness, hardness, coating thickness and bond strength. Advanced characterization methods are also covered for applications in magnetic recording media, rolling contact bearings and other high-tech systems. -- Reviews major physical principles of tribology, including adhesion, friction, abrasion and surface boundary conditions -- Special section on surface characterization of magnetic recording surfaces -- Concise summaries of major characterization technologies for tribological materials, including SEM, Energy-Dispersive X-Ray Spectroscopy, Fourier Transform Infrared Spectroscopy and Static Secondary Ion Mass Spectroscopy
Download or read book Advances In Information Storage Systems Vol 6 written by Bharat Bhushan and published by World Scientific. This book was released on 1995-06-12 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Advances in Information Storage Systems covers a wide range of interdisciplinary technical areas, related to magnetic or optical storage systems. The following nonexhaustive list is indicative of the scope of the topics: Friction, Adhesion, Wear and Lubrications, Coatings, Solid Mechanics, Air Flow, Contamination, Instrumentation, Dynamics, Shock and Vibration, Controls, Head and Suspension Design, Actuators, Spindle and Actuator Motors and Bearings, Structure of Thin Films, Corrosion, Long-Term Reliability, Materials and Processing, Manufacturing and Automation, Economics.This volume contains 30 articles covering various aspects of the information storage and processing industry. It is organized into three parts: Mechanics and Tribology of Magnetic Rigid Disk Drives; Dynamics and Controls of Magnetic Rigid Disk Drives; and Mechanics of Flexible Media Systems.
Download or read book Fundamentals of Tribology and Bridging the Gap Between the Macro and Micro Nanoscales written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 961 pages. Available in PDF, EPUB and Kindle. Book excerpt: The word tribology was fIrst reported in a landmark report by P. Jost in 1966 (Lubrication (Tribology)--A Report on the Present Position and Industry's Needs, Department of Education and Science, HMSO, London). Tribology is the science and technology of two interacting surfaces in relative motion and of related subjects and practices. The popular equivalent is friction, wear and lubrication. The economic impact of the better understanding of tribology of two interacting surfaces in relative motion is known to be immense. Losses resulting from ignorance of tribology amount in the United States alone to about 6 percent of its GNP or about $200 billion dollars per year (1966), and approximately one-third of the world's energy resources in present' use, appear as friction in one form or another. A fundamental understanding of the tribology of the head-medium interface in magnetic recording is crucial to the future growth of the $100 billion per year information storage industry. In the emerging microelectromechanical systems (MEMS) industry, tribology is also recognized as a limiting technology. The advent of new scanning probe microscopy (SPM) techniques (starting with the invention of the scanning tunneling microscope in 1981) to measure surface topography, adhesion, friction, wear, lubricant-fIlm thickness, mechanical properties all on a micro to nanometer scale, and to image lubricant molecules and the availability of supercomputers to conduct atomic-scale simulations has led to the development of a new fIeld referred to as Microtribology, Nanotribology, or Molecular Tribology (see B. Bhushan, J. N. Israelachvili and U.
Download or read book Tribocatalysis Tribochemistry and Tribocorrosion written by Czeslaw Kajdas and published by CRC Press. This book was released on 2018-05-11 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the triboemission of low-energy electrons from the freshly generated surface. These electrons play the most crucial role in the chemical reactions at the tribological interface. New models and TIP (thermodymanics of irreversible processes) describe in detail the behavior of emitted electrons which lower the activation energy of the chemical reactions. This book also highlights tribocatalysis phenomena as examples of the lowering of the activation energy. A book titled Tribocatalysis has never been published before this.
Download or read book Protective Coatings and Thin Films written by Y. Pauleau and published by Springer Science & Business Media. This book was released on 1996-12-31 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume entitled "Protective Coatings and Thin Films : Synthesis, Characterization and Applications" contains the Proceedings of the NATO Advanced Research Workshop (ARW) held in Alvor, Portugal from May 30 to June 5, 1996. This NATO-ARW was an expert meeting on the surface protection and modification of solid materials subjected to interactions with the environment. The meeting attracted 10 key speakers, 40 contributing speakers and 3 observers from various countries. The existing knowledge and current status of the science and technology related to protective coatings and thin films were assessed through a series of oral presentations, key notes (titles underlined in the volume content) and contributed papers distributed over various sessions dealing with: (a) plasma-assisted physical and chemical vapor deposition processes to enhance wear and corrosion protection of materials, (b) low friction coatings operating in hostile environment (vacuum, space, extreme temperatures, . . . ), (c) polymer films for protection against mechanical damage and chemical attack, (d) characterization of the structure of films and correlations with mechanical properties, (e) wear and corrosion resistant thermal spray coatings, (f) functional gradient ceramic/metallic coatings produced by high energy laser beam and energetic deposition processes for high temperature applications, (g) protective coatings for optical systems, and (h) ion beam assisted deposition of coatings for protection of materials against aqueous corrosion.
Download or read book Advances In Information Storage Systems Vol 7 written by Bharat Bhushan and published by World Scientific. This book was released on 1996-09-14 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Information Storage Systems (AISS) series was initiated by ASME Press. New York with a first issue published in April 1991. ASME Press published a total of five volumes in 1991-93. In 1994, World Scientific Publishing Co. Private Limited took over the highly respected series and published volume number 6 in 1995. This volume number 7 is the second volume published by the World Scientific Publishing. The aim of the series remains to report the latest results from around the world in all the electromechanical, materials science, design, and manufacturing problems of information storage systems (magnetic and optical). All articles in each volume are of international archival quality refereed according to rigorous journal standards by the editors and their reviewers. The series will continue to be published with a frequency of one per year.One hundred and fifty five articles have been published in the first six volumes. This volume contains twenty seven articles that cover various aspects of information storage and processing industry organized into three parts: Micromechanical Characterization of Component Materials; Mechanics and Tribology for Data Storage Systems; Dynamics and Controls for Data Storage Systems.
Download or read book Tribology for Scientists and Engineers written by Pradeep L. Menezes and published by Springer Science & Business Media. This book was released on 2013-12-04 with total page 940 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes available tribology technologies and introdces a comprehensive overview of tribology. General, up-to-date knowledge on how tribology is approached in various related areas of research, both experimental and computational is provided.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1991 with total page 1380 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Characterization of Tribological Materials Second Edition written by William A. Glaeser and published by Momentum Press. This book was released on 2012-11-16 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic text discusses the use of advanced surface science characterization techniques in friction, adhesive and abrasive wear, boundary lubrication, contact fatigue, and other important failure processes. Surface characterization of bearings, gears, seals, and other manufactured rolling and sliding surfaces are increasingly routine in advanced quality control of processes and in the manufacture of precision components. This book is an indispensable asset to scientists and engineers using tribological characterization techniques. New content in this edition include: • four new figures to illustrate real surface contact added to Chapter 1. • coverage of the use of the Environmental SEM (ESEM) in examining wear of fiber glass filled PTFE added to chapter 4. • new information on the wear of ceramics added to Chapter 5. • updates for new analytical systems added to Chapter 6. • coverage of Atomic Force Microscope (ATM) and its usefulness in the field of nano-tribology, providing not only full microtopography of surface roughness but also measurement of nano-friction and nanohardness of surface films, added in a new Chapter 9. • the 17 Appendices have been completely revamped with essential information organized into convenient tables.
Download or read book Carbon Nanomaterials Modeling Design and Applications written by Kun Zhou and published by CRC Press. This book was released on 2019-07-17 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanomaterials: Modeling, Design, and Applications provides an in-depth review and analysis of the most popular carbon nanomaterials, including fullerenes, carbon nanotubes, graphene and novel carbon nanomaterial-based membranes and thin films, with emphasis on their modeling, design and applications. This book provides basic knowledge of the structures, properties and applications of carbon-based nanomaterials. It illustrates the fundamental structure-property relationships of the materials in both experimental and modeling aspects, offers technical guidance in computational simulation of nanomaterials, and delivers an extensive view on current achievements in research and practice, while presenting new possibilities in the design and usage of carbon nanomaterials. This book is aimed at both undergraduate and graduate students, researchers, designers, professors, and professionals within the fields of materials science and engineering, mechanical engineering, applied physics, and chemical engineering.
Download or read book Tribochemistry of the Decomposition Mechanisms of Perfluoropolyether Lubricants at the Head disk Interface of Hard Disk Drives in UHV written by Chao-Yuan Chen and published by . This book was released on 1999 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: