Download or read book The Fracture Properties and Toughening Mechanisms of Bone and Dentin written by Kurt John Koester and published by . This book was released on 2007 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dental Erosion written by Adrian Lussi and published by Karger Medical and Scientific Publishers. This book was released on 2006-01-01 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Erosive tooth wear is a multifactorial condition of growing concern to the clinician and is a subject of extensive research. This book is the first which deals in such detail with dental erosion. It presents the whole spectrum of views on the issue, from the molecular level to behavioral aspects, as well as trends in society. The multifactorial etiological pattern of erosive tooth wear is emphasized and is a strand connecting the different chapters of the book. Definition, diagnosis, prevalence, incidence and chemistry of dental erosion are discussed in the first part of the publication. Further, topics like extrinsic and intrinsic causes of dental erosion are covered and a chapter is devoted to dental erosion in children. Methods of assessment are presented and critically evaluated. The book concludes with themes on dentinal hypersensitivity, risk assessment and preventive measures and restorative options for erosive lesions. This publication is not only highly recommended to faculty members, researchers and dental students, but also to practitioners and other dental professionals who are committed to the prevention and treatment of dental erosion.
Download or read book Bones written by John D. Currey and published by Princeton University Press. This book was released on 2006-07-23 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a comprehensive and accessible overview of what is known about the structure and mechanics of bone, bones, and teeth. In it, John Currey incorporates critical new concepts and findings from the two decades of research since the publication of his highly regarded The Mechanical Adaptations of Bones. Crucially, Currey shows how bone structure and bone's mechanical properties are intimately bound up with each other and how the mechanical properties of the material interact with the structure of whole bones to produce an adapted structure. For bone tissue, the book discusses stiffness, strength, viscoelasticity, fatigue, and fracture mechanics properties. For whole bones, subjects dealt with include buckling, the optimum hollowness of long bones, impact fracture, and properties of cancellous bone. The effects of mineralization on stiffness and toughness and the role of microcracking in the fracture process receive particular attention. As a zoologist, Currey views bone and bones as solutions to the design problems that vertebrates have faced during their evolution and throughout the book considers what bones have been adapted to do. He covers the full range of bones and bony tissues, as well as dentin and enamel, and uses both human and non-human examples. Copiously illustrated, engagingly written, and assuming little in the way of prior knowledge or mathematical background, Bones is both an ideal introduction to the field and also a reference sure to be frequently consulted by practicing researchers.
Download or read book Fracture of Nano and Engineering Materials and Structures written by E.E. Gdoutos and published by Springer Science & Business Media. This book was released on 2008-01-08 with total page 1452 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 16th European Conference of Fracture (ECF16) was held in Greece, July, 2006. It focused on all aspects of structural integrity with the objective of improving the safety and performance of engineering structures, components, systems and their associated materials. Emphasis was given to the failure of nanostructured materials and nanostructures including micro- and nano-electromechanical systems (MEMS and NEMS).
Download or read book Mechanics of Biomaterials written by Lisa A. Pruitt and published by Cambridge University Press. This book was released on 2011-10-20 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: Teaching mechanical and structural biomaterials concepts for successful medical implant design, this self-contained text provides a complete grounding for students and newcomers to the field. Split into three sections: Materials, Mechanics and Case Studies, it begins with a review of sterilization, biocompatibility and foreign body response before presenting the fundamental structures of synthetic biomaterials and natural tissues. Mechanical behavior of materials is then discussed in depth, covering elastic deformation, viscoelasticity and time-dependent behavior, multiaxial loading and complex stress states, yielding and failure theories, and fracture mechanics. The final section on clinical aspects of medical devices provides crucial information on FDA regulatory issues and presents case studies in four key clinical areas: orthopedics, cardiovascular devices, dentistry and soft tissue implants. Each chapter ends with a list of topical questions, making this an ideal course textbook for senior undergraduate and graduate students, and also a self-study tool for engineers, scientists and clinicians.
Download or read book Fracture Behavior of Biological Materials and Interfaces written by Dhaneshwar Mishra and published by Book Rivers. This book was released on 2021-03-12 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fracture Behavior of Inhomogeneous Biological Materials and Interfaces Biological materials like bone, nacre, human tooth layers are inhomogeneous materials made up of soft collagen, and hard, hydroxyapatite (HAP) mineral arranged in such a fashion so that these materials have higher strength and toughness, the measure of crack resisting behavior in materials, at the same time, which is exclusive in nature for different class of materials available for different application areas. The interfaces in these biological materials are designed in such a fashion so that the load transfer between the constituents takes place so smoothly, therefore, become a region of strength, not susceptible to failure like in other man-made materials and composites. It is important to understand these aspects of biological materials so that they can be mimicked to the novel materials to satisfy the growing need of different industries
Download or read book Calcium Orthophosphates written by Sergey V. Dorozhkin and published by CRC Press. This book was released on 2012-06-04 with total page 863 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to a great chemical similarity with the biological calcified tissues, many calcium orthophosphates possess remarkable biocompatibility and bioactivity. Materials scientists use this property extensively to construct artificial bone grafts that are either entirely made of or only surface-coated with the biologically relevant calcium orthophospha
Download or read book Mechanical Properties of Bone written by Francis Gaynor Evans and published by Charles C. Thomas Publisher. This book was released on 1973 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Textbook of Operative Dentistry written by Nisha Garg and published by Boydell & Brewer Ltd. This book was released on 2010-08 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition is a complete guide to operative dentistry. Beginning with an introduction, physiology, dental caries and tooth preparation, the text also discusses pain and infection control. The following sections examine different operative procedures. New techniques such as minimal intervention dentistry, nanotechnology and lasers; and advances in dental materials are discussed in detail. More than 1200 colour images, illustrations, flow charts and tables are included. Key points Complete guide to operative dentistry Discusses numerous different procedures, and pain and infection control New techniques and advances in materials described in detail More than 1200 colour images, illustrations, flow charts and tables Previous edition published in 2010
Download or read book Biological Materials Science written by Marc André Meyers and published by Cambridge University Press. This book was released on 2014-07-31 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: Taking a unique materials science approach, this text introduces students to the basic concepts and applications of materials and biomedical engineering and prepares them for the challenges of the new interdisciplinary field of biomaterials science. Split into three sections - Basic Biology Principles, Biological Materials, and Bioinspired Materials and Biomimetics - it presents biological materials along with the structural and functional classification of biopolymers, bioelastomers, foams, and ceramic composites. More traditional biomimetic designs such as Velcro are then discussed in conjunction with new developments that mimic the structure of biological materials at the molecular level, mixing nanoscale with biomolecular designs. Bioinspired design of materials and structures is also covered. Focused presentations of biomaterials are presented throughout the text in succinct boxes, emphasising biomedical applications, whilst the basic principles of biology are explained, so no prior knowledge is required. The topics are supported by approximately 500 illustrations, solved problems, and end-of-chapter exercises.
Download or read book Fiber Reinforced Nanocomposites Fundamentals and Applications written by Baoguo Han and published by Elsevier. This book was released on 2020-03-13 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fiber-reinforced Nanocomposites: Fundamentals and Applications explores the fundamental concepts and emerging applications of fiber-reinforced nanocomposites in the automobile, aerospace, transportation, construction, sporting goods, optics, electronics, acoustics and environmental sector. In addition, the book provides a detailed overview of the properties of fiber-reinforced nanocomposites, including discussion on embedding these high-strength fibers in matrices. Due to the mismatch in structure, density, strain and thermal expansion coefficients between matrix and fibers, their thermo-mechanical properties strongly depend not only on the preparative methods, but also on the interaction between reinforcing phase and matrix phase. This book offers a concise overview of these advances and how they are leading to the creation of stronger, more durable classes of nanocomposite materials. - Explores the interaction between fiber, nanoreinforcers and matrices at the nanoscale - Shows how the properties of fiber-enforced nanocomposites are ideal for use for a variety of consumer products - Outlines the major challenges to creating fiber-reinforced nanocomposites effectively
Download or read book The Mathematical Theory of Plasticity written by Rodney Hill and published by Oxford University Press. This book was released on 1998 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1950, this important and classic book presents a mathematical theory of plastic materials, written by one of the leading exponents.
Download or read book Advances in Calcium Phosphate Biomaterials written by Besim Ben-Nissan and published by Springer Science & Business. This book was released on 2014-04-17 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Calcium Phosphate Biomaterials presents a comprehensive, state-of-the-art review of the latest advances in developing calcium phosphate biomaterials and their applications in medicine. It covers the fundamental structures, synthesis methods, characterization methods, and the physical and chemical properties of calcium phosphate biomaterials, as well as the synthesis and properties of calcium phosphate-based biomaterials in regenerative medicine and their clinical applications. The book brings together these new concepts, mechanisms and methods in contributions by both young and “veteran” academics, clinicians, and researchers to forward the knowledge and expertise on calcium phosphate and related materials. Accordingly, the book not only covers the fundamentals but also open new avenues for meeting future challenges in research and clinical applications. Besim Ben-Nissan is a Professor of Chemistry and Forensic Science at the University of Technology, Sydney, Australia
Download or read book Mechanics of Biological Systems and Materials Volume 5 written by Barton C. Prorok and published by Springer Science & Business Media. This book was released on 2012-09-27 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics of Biological Systems and Materials, Volume 5: Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics represents one of seven volumes of technical papers presented at the Society for Experimental Mechanics SEM 12th International Congress & Exposition on Experimental and Applied Mechanics, held at Costa Mesa, California, June 11-14, 2012. The full set of proceedings also includes volumes on Dynamic Behavior of Materials, Challenges in Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials, Imaging Methods for Novel Materials and Challenging Applications, Experimental and Applied Mechanics, MEMS and Nanotechnology and, Composite Materials and Joining Technologies for Composites.
Download or read book Recent Advances in Smart Self Healing Polymers and Composites written by Guoqiang Li and published by Woodhead Publishing. This book was released on 2022-06-08 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: There have been many new developments since the first edition of this book was published back in 2015. These can be summarized as follows: integration of multiple properties into self-healing polymer materials, such as the shape memory effect and flame retardancy; beyond self-healing and the development of recyclable thermoset polymers; and the application of self-healing polymers in both 3D and 4D printing. Recent Advances in Smart Self-healing Polymers and Composites, Second Edition provides a comprehensive introduction to the fascinating field of smart self-healing polymers and composites. All chapters are brought fully-up-to-date with the addition of six brand new contributions on the characterization of self-healing polymers, light-triggered self-healing, additive manufacturing, multifunctional thermoset polymers with self-healing ability, and recyclable thermoset polymers and 4D printing. It is written for a large readership including not only R&D researchers from diverse backgrounds such as chemistry, materials science, aerospace, physics, and biological science, but also for graduate student working on self-healing technologies as well as their newly developed applications. - Features new chapters on characterization of self-healing polymers, light-triggered self-healing, additive manufacturing, multifunctional thermoset polymers with self-healing ability, recyclable thermoset polymers and 4D printing - All chapters have been significantly updated from the previous edition - Provides a grounding in all key areas of research to bring people up to speed with the latest developments
Download or read book Bioactive Glasses and Glass Ceramics written by Francesco Baino and published by John Wiley & Sons. This book was released on 2022-06-17 with total page 904 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioactive Glasses and Glass-Ceramics Fundamentals and Applications A Comprehensive and Critical Overview of Bioactive Glasses and Glass-Ceramics Bioactive glasses and glass-ceramics are a versatile class of biocompatible materials that have an astonishing impact in biomedicine. Bioactive Glasses and Glass-Ceramics: Fundamentals and Applications presents topics on the functional properties, processing, and applications of bioactive glasses and glass-ceramics. The primary use of bioactive glasses and glass-ceramics is to repair bone and dental defects; however, their full potential is yet to be fulfilled. Many of today’s achievements in regenerative medicine and soft tissue healing were unthinkable when research began. As a result, the research involving bioactive glasses and glass-ceramics is highly stimulating and continuously progresses across many different disciplines including chemistry, materials science, bioengineering, biology, and medicine. Topics relating to these disciplines and covered within the work include: Fundamentals on bioactive glasses and glass-ceramics, bioactive glasses in today’s market, and improvements and challenges for the future Scalability and other issues when taking bioactive glass from lab to industry/commercialization applications, plus clinical challenges Trending topics such as bioactive glass porous scaffolds, additive manufacturing of bioactive glasses, and nano-engineering of bioactive glasses The various bioactive glass compositions which have been developed as medical products in an expanding range of forms and applications Bioactive Glasses and Glass-Ceramics: Fundamentals and Applications serves as a comprehensive and complete reference work on bioactive glasses and glass-ceramics for research and development (R&D) materials scientists, surgeons, and physicians, and leadership at glass and medical companies. Students and professors in fields of study pertaining to the aforementioned disciplines will also derive value from the work.
Download or read book Collagen written by Peter Fratzl and published by Springer Science & Business Media. This book was released on 2008-05-10 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Not only does this book provide a comprehensive review of current research advances in collagen structure and mechanics, it also explores this biological macromolecule’s many applications in biomaterials and tissue engineering. Readers gain an understanding of the structure and mechanical behavior of type I collagen and collagen-based tissues in vertebrates across all length scales, from the molecular (nano) to the organ (macro) level.
