Download or read book The Fracture Morphology of Nickel Base Superalloys Tested in Fatigue and Creep Fatigue at 650 C written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-20 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fracture surfaces of compact tension specimens from seven nickel-base superalloys fatigue tested at 650 C were studied by scanning electron microscopy and optical metallography to determine the nature and morphology of the crack surface in the region of stable growth. Crack propagation testing was performed as part of an earlier study at 650 C in air using a 0.33 Hz fatigue cycle and a creep-fatigue cycle incorporating a 900 second dwell at maximum load. In fatigue, alloys with a grain size greater than 20 micrometers, HIP Astroloy, Waspaloy, and MERL 76, exhibited transgranular fracture. MERL 76 also displayed numerous fracture sites which were associated with boundaries of prior powder particles. The two high strength, fine grain alloys, IN 100 and NASA IIB-7, exhibited intergranular fracture. Rene 95 and HIP plus forged Astroloy displayed a mixed failure mode that was transgranular in the coarse grains and intergranular in the fine grains. Under creep-fatigue conditions, fracture was found to be predominantly intergranular in all seven alloys. Gayda, J. and Miner, R. V. Glenn Research Center NASA-TM-81740, E-793

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1992 with total page 1572 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book NASA Technical Memorandum written by and published by . This book was released on 1988 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Superalloys 2012 written by Eric S. Huron and published by John Wiley & Sons. This book was released on 2012-10-02 with total page 952 pages. Available in PDF, EPUB and Kindle. Book excerpt: A superalloy, or high-performance alloy, is an alloy that exhibits excellent mechanical strength at high temperatures. Superalloy development has been driven primarily by the aerospace and power industries. This compilation of papers from the Twelfth International Symposium on Superalloys, held from September 9-13, 2012, offers the most recent technical information on this class of materials.

Download or read book Engine Structures written by and published by . This book was released on 1988 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Temperature Alloys for Gas Turbines 1982 written by R. Brunetaud and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 1060 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European Collaborative Programme on Materials for Gas Turbines known as COST-50 was initiated in 1971 and has been supported since then by the Commission of European Communities. The achievements made during the first phase of COST-50 were reviewed at the Conference held in Liege, September 25-27, 1978 and published by Applied Science Publishers Ltd. Nine European Countries : Austria, Belgium, the Federal Republic of Germany, France, Italy, The Netherlands, Sweden, Switzerland, the United Kingdom, and the Joint Research Center of the Community, agreed to continue their participation in COST-50 and the results of the second phase were presented at the Conference held in Liege, October 4-6, 1982 under the following headings : - Corrosion and Coatings - Fatigue, Creep and Structural Stability - Processing The technical sessions consisted of invited papers reviewing recent progress in the development of high temperature alloys with particular emphasis on the results of the European Collaborative Programme. Furthermore, some areas were reviewed by eminent speakers from the United States of America, due to their expertise in their respective fields. In this context and as a tradition introduced in 1978, the keynote lecture "Superalloys technology : today and tomorrow" was del ivered by Dr. F. L. Versnyder. The Conference was completed with a significant Poster Session comprising about fifty contributions from Europe and elsewhere. This book comprises a total of fifty four contributions representing almost all of the papers delivered at the technical sessions and a large part of the presentations made at the Poster Session.

Download or read book Government Reports Announcements Index written by and published by . This book was released on 1994 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Embrittlement of Engineering Alloys written by C. L. Briant and published by Elsevier. This book was released on 2013-10-22 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: Treatise on Materials Science and Technology, Volume 25: Embrittlement of Engineering Alloys is an 11-chapter text that describes some situations that produce premature failure of several engineering alloys, including steels and nickel- and aluminum-base alloys. Chapters 1 to 3 consider situations where improper alloy composition, processing, and/or heat treatment can lead to a degradation of mechanical properties, even in the absence of an aggressive environment or an elevated temperature. Chapters 4 and 5 examine the effect of elevated temperatures on the mechanical properties of both ferrous and nonferrous alloys. Chapters 6 and 7 discuss the effects of corrosive environments on both stressed and unstressed materials. In these environments anodic dissolution is the primary step that leads to failure. Chapters 8 to 10 deal with the effects of aggressive environments that lead to enhanced decohesion or embrittlement of the metal, such as hydrogen, liquid metal, and irradiation-induced embrittlement. Chapter 11 looks into the embrittlement phenomena occurring during welding, one of the most common processing conditions to which a material could be subjected. This book will prove useful to materials scientists and researchers.

Download or read book Superalloys 2024 written by Jonathan Cormier and published by Springer Nature. This book was released on with total page 1121 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 8th Congress on Material Testing Budapest 28 September 1 October 1982 written by and published by . This book was released on 1982 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Low Cycle Fatigue written by Harvey D. Solomon and published by ASTM International. This book was released on 1988 with total page 1289 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Residual Stress Effects on Fatigue and Fracture Testing and Incorporation of Results Into Design written by Michael R. Mitchell and published by ASTM International. This book was released on 2007 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Eleven peer-reviewed papers, written by experts in their field, provide an understanding of residual stresses, fatigue crack growth, fatigue lifetime predictions, and their effect on structural integrity. Residual stresses can be present due to processing and manufacturing of materials and structures, so it is imperative to understand how and why they can influence the test data that we used in structural design methodologies. Residual stresses may also be intentionally engineered into structures in attempts to improve fatigue life, and it is equally important that designers understand how to account for these potential effects on fatigue life."--Publisher's website.

Download or read book Deformation and Evolution of Life in Crystalline Materials written by Xijia Wu and published by CRC Press. This book was released on 2019-04-09 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book walks you through the fundamental deformation and damage mechanisms. It lends the reader the key to open the doors into the maze of deformation/fracture phenomena under various loading conditions. Furthermore it provides the solution method to material engineering design and analysis problems, for those working in the aerospace, automotive or energy industries. The book introduces the integrated creep-fatigue theory (ICFT) that considers holistic damage evolution from surface/subsurface crack nucleation to propagation in coalescence with internally-distributed damage/discontinuities.

Download or read book Metals Abstracts written by and published by . This book was released on 1994 with total page 1584 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 3rd European Conference on Advanced Materials and Processes written by R. Pichoir and published by . This book was released on 1993 with total page 978 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Journal de Physique written by and published by . This book was released on 1991 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy Research Abstracts written by and published by . This book was released on 1986 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiannual, with semiannual and annual indexes. References to all scientific and technical literature coming from DOE, its laboratories, energy centers, and contractors. Includes all works deriving from DOE, other related government-sponsored information, and foreign nonnuclear information. Arranged under 39 categories, e.g., Biomedical sciences, basic studies; Biomedical sciences, applied studies; Health and safety; and Fusion energy. Entry gives bibliographical information and abstract. Corporate, author, subject, report number indexes.