Download or read book The Fourth International Conference on Compact Heat Exchangers and Enhancement Technology for the Process Industries written by G. P. Celata and published by . This book was released on 2004 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Compact Heat Exchangers and Enhancement Technology for the Process Industries 2003 written by Ramesh K. Shah and published by . This book was released on 2003 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes a total of 65 papers from 16 countries and is divided into the follwoing sections: Single-Phase Flow and Heat Transfer Fundamental Studies; Single-Phase Augmentation Techniques; Single-Phase Heat Transfer Design Data and Methods; Single-Phase Heat Exchanger Development and Applications; Phase-Change Heat Transfer Fundamental Studies; Condebsation and Vaporization Augmentation Techniques; Vaporization and Condensation Design Data and Methods; Phase-Change Heat Exchanger Developmet and Applications; Fouling in Heat Exchangers. These papers represent a focused attention to the use of CHEs and Enhancement Technology in the process industries and indicateenormous opportunities.
Download or read book Compact Heat Exchangers and Enhancement Technology for the Process Industries written by R. K. Shah and published by Begell House Publishers. This book was released on 1999 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: The drive to minimize capital investment and improve the energy efficiency of process industry plants has led to a reassessment of the desirability and practicality of incorporating compact heat exchangers (CHEs) and heat transfer enhancement technology into process plants. This volume collects papers presented at the International Conference on Compact Heat Exchangers for the Process Industries, whose objectives were to exploit the existing forms of the CHEs and enhancement technology with their potential use and benefits, to identify new forms of the CHEs and enhancement technology, and to identify and discuss barriers and critical issues preventing the broader use of CHEs and enhancement technology.
Download or read book Compact Heat Exchangers and Enhancement Technology for the Process Industries 2001 written by Ramesh K. Shah and published by Begell House Publishers. This book was released on 2001 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: With keynote papers by leading international specialists the proceedings cowers the following topics; single-phase flow and heat transfer fundamental studies, single-phase augmentation techniques, single-phase heat transfer design data and methods, single-phase heat enhexchanger development and applications, phase-change heat transfer fundamental studies, vaporization, condensationand absorpion augmentation techniques, vaporization and condensation data and methods, phase-change heat exchanger development and applications, fouling in heat exchangers.
Download or read book Compact Heat Exchangers for the Process Industries written by Kenneth J. Bell and published by Begell House Publishers. This book was released on 1997 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compact Heat Exchangers (CHEs) are characterized by large heat transfer area per unit volume of exchanger, resulting in reduced space, weight, and usually reduced energy requirements and cost compared to conventional designs. The objectives of this conference were to identify existing forms of CHEs with their potential use and benefits, to identify the new forms of CHEs, and to identify and discuss barriers and critical issues preventing the broader use of CHEs for the process industry applications.
Download or read book Microchemical Engineering in Practice written by Thomas Dietrich and published by John Wiley & Sons. This book was released on 2011-11-18 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microchemical Engineering in Practice provides the information chemists and engineers need to evaluate the use of microreactors, covering the technical, operational, and economic considerations for various applications. It explains the systems needed to use microreactors in production and presents examples of microreactor use in different chemistries, including larger scale production processes. There are guidelines on calculating the costs and the risks of production using continuous flow microreactors. Complete with case studies, this is an essential guide for chemists and engineers interested in investigating the advantages of chemical microreactors.
Download or read book Chemical Engineering Volume 2 written by J H Harker and published by Elsevier. This book was released on 2013-10-22 with total page 1219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Volume 2 covers the properties of particulate systems, including the character of individual particles and their behaviour in fluids. Sedimentation of particles, both singly and at high concentrations, flow in packed and fluidised beads and filtration are then examined. The latter part of the book deals with separation processes, such as distillation and gas absorption, which illustrate applications of the fundamental principles of mass transfer introduced in Chemical Engineering Volume 1. In conclusion, several techniques of growing importance - adsorption, ion exchange, chromatographic and membrane separations, and process intensification - are described. A logical progression of chemical engineering concepts, volume 2 builds on fundamental principles contained in Chemical Engineering volume 1 and these volumes are fully cross-referenced Reflects the growth in complexity and stature of chemical engineering over the last few years Supported with further reading at the end of each chapter and graded problems at the end of the book
Download or read book Process Heat Transfer written by Sarit K. Das and published by Alpha Science Int'l Ltd.. This book was released on 2005 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present text is aimed at giving the students a substantial feel of the fundamentals of heat transfer applied to process industry. Though the introduction of the material is made at the undergraduate level for a first course in Process Heat Transfer', it includes enough advanced material for postgraduate courses on Process Heat Transfer' or Heat Exchangers'. The text starts with summary of single phase heat transfer. Subsequently classification, selection and basic theory of heat transfer equipment are explained. Based on this, traditional heat exchangers as well as stirred tanks are treated in detail. Special emphasis has been laid on plate type heat exchangers. The second part introduces two-phase heat transfer followed by apparatus dealing with phase change such as condensers, evaporators, reboilers and cooling towers. Finally, recent advances in process optimization through pinch technology and energy analysis along with transient response of heat exchangers are introduced. The textbook stresses on design approach.
Download or read book International Conference on Enhanced Compact and Ultra compact Heat Exchangers Science Engineering and Technology 2005 written by Engineering Conferences International (Eci) and published by . This book was released on 2009-06-16 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Process Heat Transfer written by Robert W. Serth and published by Academic Press. This book was released on 2014-01-27 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Heat Transfer is a reference on the design and implementation of industrial heat exchangers. It provides the background needed to understand and master the commercial software packages used by professional engineers in the design and analysis of heat exchangers. This book focuses on types of heat exchangers most widely used by industry: shell-and-tube exchangers (including condensers, reboilers and vaporizers), air-cooled heat exchangers and double-pipe (hairpin) exchangers. It provides a substantial introduction to the design of heat exchanger networks using pinch technology, the most efficient strategy used to achieve optimal recovery of heat in industrial processes. Utilizes leading commercial software. Get expert HTRI Xchanger Suite guidance, tips and tricks previously available via high cost professional training sessions. Details the development of initial configuration for a heat exchanger and how to systematically modify it to obtain an efficient final design. Abundant case studies and rules of thumb, along with copious software examples, provide a complete library of reference designs and heuristics for readers to base their own designs on.
Download or read book Heat Exchangers written by Laura Castro Gómez and published by BoD – Books on Demand. This book was released on 2022-03-23 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demand for energy to satisfy the basic needs and services of the population worldwide is increasing as are the economic costs associated with energy production. As such, it is essential to emphasize energy recovery systems to improve heat transfer in thermal processes. Currently, significant research efforts are being conducted to expose criteria and analysis techniques for the design of heat exchange equipment. This book discusses optimization of heat exchangers, heat transfer in novel working fluids, and the experimental and numerical analysis of heat transfer applications.
Download or read book Application of Compact Heat Exchangers For Combined Cycle Driven Efficiency In Next Generation Nuclear Power Plants written by Bahman Zohuri and published by Springer. This book was released on 2015-11-19 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the fundamentals of combined-cycle plants to provide background for understanding the progressive design approaches at the heart of the text Discusses the types of compact heat exchanger surfaces, suggesting novel designs that can be considered for optimal cost effectiveness and maximum energy production Undertakes the thermal analysis of these compact heat exchangers throughout the life cycle, from the design perspective through operational and safety assurance stages This book describes the quest to create novel designs for compact heat exchangers in support of emergent combined cycle nuclear plants. The text opens with a concise explanation of the fundamentals of combined cycles, describing their efficiency impacts on electrical power generation systems. It then covers the implementation of these principles in nuclear reactor power systems, focusing on the role of compact heat exchangers in the combined cycle loop and applying them to the challenges facing actual nuclear power systems. The various types of compact heat exchanger surfaces and designs are given thorough consideration before the author turns his attention to discussing current and projected reactor systems, and how the novel design of these compact heat e xchangers can be applied to innovative designs, operation and safety analyses to optimize thermal efficiency. The book is written at an undergraduate level, but will be useful to practicing engineers and scientists as well.
Download or read book Essential Readings in Light Metals Volume 2 Aluminum Reduction Technology written by Geoff Bearne and published by Springer. This book was released on 2017-03-02 with total page 1124 pages. Available in PDF, EPUB and Kindle. Book excerpt: ONE OF A FOUR-BOOK COLLECTION SPOTLIGHTING CLASSIC ARTICLES Landmark research findings and reviews in aluminum reduction technology Highlighting some of the most important findings and insights reported over the past five decades, this volume features many of the best original research papers and reviews on aluminum reduction technology published from 1963 to 2011. Papers have been organized into seven themes: 1. Fundamentals 2. Modeling 3. Design 4. Operations 5. Control 6. Environmental 7. Alternative processes The first six themes deal with conventional Hall-Héroult electrolytic reduction technology, whereas the last theme features papers dedicated to nonconventional processes. Each section begins with a brief introduction and ends with a list of recommended articles for further reading, enabling researchers to explore each subject in greater depth. The papers for this volume were selected from among some 1,500 Light Metals articles. Selection was based on a rigorous review process. Among the papers, readers will find breakthroughs in science as well as papers that have had a major impact on technology. In addition, there are expert reviews summarizing our understanding of key topics at the time of publication. From basic research to advanced applications, the articles published in this volume collectively represent a complete overview of aluminum reduction technology. It will enable students, scientists, and engineers to trace the history of aluminum reduction technology and bring themselves up to date with the current state of the technology.
Download or read book Coulson and Richardson s Chemical Engineering written by R. P. Chhabra and published by Butterworth-Heinemann. This book was released on 2019-04-26 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coulson and Richardson's Chemical Engineering: Volume 2A: Particulate Systems and Particle Technology, Sixth Edition, has been fully revised and updated to provide practitioners with an overview of chemical engineering, including clear explanations of theory and thorough coverage of practical applications, all supported by case studies. A worldwide team of contributors has pooled their experience to revise old content and add new content. The content has been updated to be more useful to practicing engineers. This complete reference to chemical engineering will support you throughout your career, as it covers every key chemical engineering topic. Fluid Flow, Heat Transfer and Mass Transfer has been developed from the series' volume 1, 6th edition. This volume covers the three main transport process of interest to chemical engineers: momentum transfer (fluid flow), heat transfer and mass transfer and the relationships between them. Particulate Systems and Particle Technology has been developed from the series' volume 2, 5th edition. This volume covers the properties of particulate systems, including the character of individual particles and their behavior in fluids. Sedimentation of particles, both singly and at high concentrations, flow in packed and fluidized beads and filtration are then examined. Separation Processes has been developed from the series' volume 2, 5th edition. This volume covers distillation and gas absorption, which illustrate applications of the fundamental principles of mass transfer. Several techniques-adsorption, ion exchange, chromatographic and membrane separations, and process intensification-are described. Chemical and Biochemical Reactors and Reaction Engineering has been developed from the series' volume 3, 3rd edition. Features fully revised reference material converted from textbooks Covers foundational to technical topics Features emerging applications, numerical methods and computational tools
Download or read book Compact Heat Exchangers written by J.E. Hesselgreaves and published by Elsevier. This book was released on 2001-05-08 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the ideas and industrial concepts in compact heat exchanger technology that have been developed in the last 10 years or so. Historically, the development and application of compact heat exchangers and their surfaces has taken place in a piecemeal fashion in a number of rather unrelated areas, principally those of the automotive and prime mover, aerospace, cryogenic and refrigeration sectors. Much detailed technology, familiar in one sector, progressed only slowly over the boundary into another sector. This compartmentalisation was a feature both of the user industries themselves, and also of the supplier, or manufacturing industries. These barriers are now breaking down, with valuable cross-fertilisation taking place. One of the industrial sectors that is waking up to the challenges of compact heat exchangers is that broadly defined as the process sector. If there is a bias in the book, it is towards this sector. Here, in many cases, the technical challenges are severe, since high pressures and temperatures are often involved, and working fluids can be corrosive, reactive or toxic. The opportunities, however, are correspondingly high, since compacts can offer a combination of lower capital or installed cost, lower temperature differences (and hence running costs), and lower inventory. In some cases they give the opportunity for a radical re-think of the process design, by the introduction of process intensification (PI) concepts such as combining process elements in one unit. An example of this is reaction and heat exchange, which offers, among other advantages, significantly lower by-product production.To stimulate future research, the author includes coverage of hitherto neglected approaches, such as that of the Second Law (of Thermodynamics), pioneered by Bejan and co- workers. The justification for this is that there is increasing interest in life-cycle and sustainable approaches to industrial activity as a whole, often involving exergy (Second Law) analysis. Heat exchangers, being fundamental components of energy and process systems, are both savers and spenders of exergy, according to interpretation.
Download or read book Special Issue Selected Papers Presented at the Seventh International Conference on Enhanced Compact and Ultra Compact Heat Exchangers From Microscale Phenomena to Industrial Applications September 13 18 2009 Heredia Costa Rica written by and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Exchanger Design Handbook written by Kuppan Thulukkanam and published by CRC Press. This book was released on 2013-05-20 with total page 1245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive reference covers important aspects of heat exchangers (HEs): design and modes of operation and practical, large-scale applications in process, power, petroleum, transport, air conditioning, refrigeration, cryogenics, heat recovery, energy, and other industries. This second edition includes over 400 drawings, diagrams, tables, and equations, includes updated material throughout; coverage of the latest advances in HE design techniques; expanded and updated coverage of materials selection; and a look at the newest fabrication techniques.
