Download or read book Adiabatic Shear Localization written by Bradley Dodd and published by Elsevier. This book was released on 2012-05-22 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adiabatic shear localization is a mode of failure that occurs in dynamic loading. It is characterized by thermal softening occurring over a very narrow region of a material and is usually a precursor to ductile fracture and catastrophic failure. This reference source is the revised and updated version of the first detailed study of the mechanics and modes of adiabatic shear localization in solids. Building on the success of the first edition, the book provides a systematic description of a number of aspects of adiabatic shear banding. The concepts and techniques described in this work can usefully be applied to solve a multitude of problems encountered by those investigating fracture and damage in materials, impact dynamics, metal working and other areas. Specific chapters focus on energetic materials, polymers, bulk metal glasses, and the mathematics of shear banding as well as the numerical modeling of them. With its detailed coverage of the subject, this book is of great interest to academics and researchers into materials performance as well as professionals. - Up-to-date coverage of the subject and research that has occurred over the past 20 years - Each chapter is written on a different sub-field of adiabatic shear by an acknowledged expert in the field - Detailed and clear discussions of each aspect

Download or read book The Physics and Mathematics of Adiabatic Shear Bands written by T. W. Wright and published by Cambridge University Press. This book was released on 2002-07-22 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a research monograph on the material instability known as adiabatic shear banding which often occurs in a plastically deforming material as it undergoes rapid shearing. Plastic deformation generates heat, which eventually softens most materials with continued straining, a process which is usually unstable. In this case the instability results in thin regions of highly deformed material, which are often the sites of further damage and complete failure. The main body of the book examines a series of one-dimensional problems of increasing complexity. In this way a comprehensive and quantitative picture of the complete phenomena is built up. Particular care is taken to use well established asymptotic techniques to find simple, but universal, analytic expressions or scaling laws that encapsulate various aspects of the dynamic formation and the final morphology of shear bands. A fully developed mechanics of shear is just beginning to emerge as a major companion to fracture mechanics, this book may speed the process along.

Download or read book Dynamic Behavior of Materials written by Marc A. Meyers and published by John Wiley & Sons. This book was released on 1994-10-28 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses fundamentals and advanced topics relevant to the behavior of materials under in-service conditions such as impact, shock, stress and high-strain rate deformations. Deals extensively with materials from a microstructure perspective which is the future direction of research today.

Download or read book Adiabatic Shear Band Formation in Titanium written by M. Laxmi Prasad and published by . This book was released on 1993 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Particle and Continuum Aspects of Mesomechanics written by George C. Sih and published by John Wiley & Sons. This book was released on 2010-01-05 with total page 837 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title brings together a variety of papers presented at the 9th annual Meso meeting in 2007. The topics selected for Meso 2007 are designed to illustrate the relation of thresholds to multiscaling: Flow through capillary tubes in contrast to pipes Laminar and turbulent flow transition Heat convection of thin wires in contrast to cylinders Electrical conductance of macro- and nano-circuits Rubbery and glassy polymers Single- and poly-crystal behavior Strength of wires and round cylindrical bars Uni-axial and multi-axial material: linear and non-linear response Thin and thick plate behavior Brittle and ductile fracture Small and large crack growth behavior Low and high temperature effects Local and global material property characteristics Small and large bodies: size and time effects Specimen and structure

Download or read book Handbook of Materials Structures Properties Processing and Performance written by Lawrence E. Murr and published by Springer. This book was released on 2021-01-14 with total page 1500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This extensive knowledge base provides a coherent description of advanced topics in materials science and engineering with an interdisciplinary/multidisciplinary approach. The book incorporates a historical account of critical developments and the evolution of materials fundamentals, providing an important perspective for materials innovations, including advances in processing, selection, characterization, and service life prediction. It includes the perspectives of materials chemistry, materials physics, engineering design, and biological materials as these relate to crystals, crystal defects, and natural and biological materials hierarchies, from the atomic and molecular to the macroscopic, and emphasizing natural and man-made composites. This expansive presentation of topics explores interrelationships among properties, processing, and synthesis (historic and contemporary). The book serves as both an authoritative reference and roadmap of advanced materials concepts for practitioners, graduate-level students, and faculty coming from a range of disciplines.

Download or read book High Performance Structural Materials written by Yafang Han and published by Springer. This book was released on 2018-04-17 with total page 1035 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume gathers selected papers presented at the Chinese Materials Conference 2017 (CMC2017), held in Yinchuan City, Ningxia, China, on July 06-12, 2017. This book covers a wide range of powder metallurgy, high performance aluminum alloys, high performance titanium & titanium alloys, superalloys, metal matrix composite, space materials science and technology, rare metals, refractory metals and their applications, advanced ceramics materials, nanostructured metals and alloys. The Chinese Materials Conference (CMC) is the most important serial conference of the Chinese Materials Research Society (C-MRS) and has been held each year since the early 1990s. The 2017 installment included 37 Symposia covering four fields: Advances in energy and environmental materials; High performance structural materials; Fundamental research on materials; and Advanced functional materials. More than 5500 participants attended the congress, and the organizers received more than 700 technical papers. Based on the recommendations of symposium organizers and after peer reviewing, 490 papers have been included in the present proceedings, which showcase the latest original research results in the field of materials, achieved by more than 300 research groups at various universities and research institutes.

Download or read book Springer Handbook of Experimental Solid Mechanics written by William N. Sharpe, Jr. and published by Springer Science & Business Media. This book was released on 2008-12-04 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Springer Handbook of Experimental Solid Mechanics documents both the traditional techniques as well as the new methods for experimental studies of materials, components, and structures. The emergence of new materials and new disciplines, together with the escalating use of on- and off-line computers for rapid data processing and the combined use of experimental and numerical techniques have greatly expanded the capabilities of experimental mechanics. New exciting topics are included on biological materials, MEMS and NEMS, nanoindentation, digital photomechanics, photoacoustic characterization, and atomic force microscopy in experimental solid mechanics. Presenting complete instructions to various areas of experimental solid mechanics, guidance to detailed expositions in important references, and a description of state-of-the-art applications in important technical areas, this thoroughly revised and updated edition is an excellent reference to a widespread academic, industrial, and professional engineering audience.

Download or read book Opportunities in Protection Materials Science and Technology for Future Army Applications written by National Research Council and published by National Academies Press. This book was released on 2011-08-27 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Armor plays a significant role in the protection of warriors. During the course of history, the introduction of new materials and improvements in the materials already used to construct armor has led to better protection and a reduction in the weight of the armor. But even with such advances in materials, the weight of the armor required to manage threats of ever-increasing destructive capability presents a huge challenge. Opportunities in Protection Materials Science and Technology for Future Army Applications explores the current theoretical and experimental understanding of the key issues surrounding protection materials, identifies the major challenges and technical gaps for developing the future generation of lightweight protection materials, and recommends a path forward for their development. It examines multiscale shockwave energy transfer mechanisms and experimental approaches for their characterization over short timescales, as well as multiscale modeling techniques to predict mechanisms for dissipating energy. The report also considers exemplary threats and design philosophy for the three key applications of armor systems: (1) personnel protection, including body armor and helmets, (2) vehicle armor, and (3) transparent armor. Opportunities in Protection Materials Science and Technology for Future Army Applications recommends that the Department of Defense (DoD) establish a defense initiative for protection materials by design (PMD), with associated funding lines for basic and applied research. The PMD initiative should include a combination of computational, experimental, and materials testing, characterization, and processing research conducted by government, industry, and academia.

Download or read book Microstructural Characterization of Shear Band Formation in Al Li Alloys written by Roa Wen Chen and published by . This book was released on 1993 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Shock Wave and High Strain Rate Phenomena in Materials written by 0 Meyers, and published by CRC Press. This book was released on 2023-07-21 with total page 1852 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings of EXPLOMET 90, the International Conference on the Materials Effects of Shock-Wave and High-Strain-Rate Phenomena, held August 1990, in La Jolla, California, represent a global and up-to-date appraisal of this field. Contributions (more than 100) deal with high-strain-rate deforma

Download or read book Mechanical Behavior of Materials written by Marc André Meyers and published by Cambridge University Press. This book was released on 2008-11-06 with total page 1455 pages. Available in PDF, EPUB and Kindle. Book excerpt: A balanced mechanics-materials approach and coverage of the latest developments in biomaterials and electronic materials, the new edition of this popular text is the most thorough and modern book available for upper-level undergraduate courses on the mechanical behavior of materials. To ensure that the student gains a thorough understanding the authors present the fundamental mechanisms that operate at micro- and nano-meter level across a wide-range of materials, in a way that is mathematically simple and requires no extensive knowledge of materials. This integrated approach provides a conceptual presentation that shows how the microstructure of a material controls its mechanical behavior, and this is reinforced through extensive use of micrographs and illustrations. New worked examples and exercises help the student test their understanding. Further resources for this title, including lecture slides of select illustrations and solutions for exercises, are available online at www.cambridge.org/97800521866758.

Download or read book Additive and Traditionally Manufactured Components written by Joshua Pelleg and published by Elsevier. This book was released on 2020-04-30 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive and Traditionally Manufactured Components: A Comparative Analysis of Mechanical Properties looks at the mechanical properties of materials produced by additive manufacturing (AM) and compares them with conventional methods. Since the production of objects by AM techniques can used in a broad array of materials, the alloys presented are the ones most commonly produced by AM - Al alloys, Ti alloys and steel. The book explores the six main types of techniques: Fused Deposition Method (FDM), Powder Bed Fusion (PBF), Inkjet Printing, Stereolithography (SLA), Direct Energy Deposition (DED) and Laminated Object Manufacturing (LOM), and follows with the techniques being utilized for fabrication. Testing of AM fabricated specimens, including tension, compression and hardness is included, along with a comparison of those results to specimens obtained by conventional fabrication methods. Topics covered include static deformation, time dependent deformation (creep), cyclic deformation (fatigue) and fracture in specimens. The book concludes with a review of the mechanical properties of nanoscale specimens obtained by AM.

Download or read book The Science of Armour Materials written by Ian Crouch and published by Woodhead Publishing. This book was released on 2016-09-21 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Science of Armour Materials comprehensively covers the range of armor materials from steels and light alloys, through glasses and ceramics, to fibers, textiles, and protective apparel. The book also discusses aspects of analytical and numerical modeling, as well as laboratory-based high-strain rate testing and ballistic testing methodologies. Each chapter is written from an international perspective, including reviews of the current global literature, and incorporates case studies that focus upon real life applications, research outcomes, and lessons learned. The threat spectrum is restricted to small arms ammunition, high velocity fragments, and stab and spike attacks, as well as blast loadings. - Features input from an editor who is an expert in his field: Dr. Ian Crouch, the author of over 80 publications in his field, with three patents to his name - Provides systematic and comprehensive coverage of armor materials, modeling, and testing - Offers a cross-disciplinary approach that brings together expertise in materials science and defense engineering - Discusses aspects of analytical and numerical modeling, as well as laboratory-based high-strain rate testing and ballistic testing methodologies

Download or read book Proceedings of the 13th World Conference on Titanium written by Vasisht Venkatesh and published by John Wiley & Sons. This book was released on 2016-04-26 with total page 2004 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the Proceedings of the 13th World Conference on Titanium.

Download or read book Advanced Engineering and Materials ICMEM written by Wen Jin and published by Trans Tech Publications Ltd. This book was released on 2013-02-13 with total page 813 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2013 International Conference on Mechanical Engineering and Materials (ICMEM 2013), January 27-28, 2013, Sanya, China

Download or read book Fundamental Issues and Applications of Shock Wave and High Strain Rate Phenomena written by K.P. Staudhammer and published by Elsevier. This book was released on 2001-02-08 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of EXPLOMETTM 2000, International Conference on Fundamental Issues and Applications of Shock-Wave and High-Strain-Rate Phenomena, held in Albuquerque, New Mexico, 2000; the fifth in the EXPLOMETTM quinquennial series which began in Albuquerque in 1980. The book is divided into five major sections with a total of 85 chapters. Section I deals with materials issues in shock and high strain rates while Section II covers shock consolidation, reactions, and synthesis. Materials aspects of ballistic and hypervelocity impact are covered in Section III followed by modeling and simulation in Section IV and a range of novel applications of shock and high-strain-rate phenomena in Section V. Like previous conference volumes published in 1980, 1985, and 1995, the current volume includes contributions from fourteen countries outside the United States. As a consequence, it is hoped that this book will serve as a global summary of current issues involving shock and high-strain-rate phenomena as well as a general reference and teaching componant for specializd curricula dealing with these features in a contemporary way. Over the past twenty years, the EXPLOMETTM Conferences have created a family of participants who not only converse every five years but who have developed long-standing interactions and professional relationships which continue to stimulate new concepts and applications particularly rooted in basic materials behavior.