Download or read book The Evaluation of Materials and Structures by Quantitative Ultrasonics written by J.D. Achenbach and published by Springer. This book was released on 2014-05-04 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nondestructive evaluation (NDE) procedures are needed for materials processing, as well as for post-process materials testing. They play important roles in product design, analysis of service-life expectancy, manufacturing and quality control of manufactured products. They are also essential to on-line monitoring of the integrity of structural elements and complex systems. Rational accept and reject criteria should be based on NDE tests. Critical safety, efficiency and operational features of large-scale structures depend on adequate NDE capabilities. The lectures presented in this volume are concerned with quantitative ultrasonic NDE. They present fundamental concepts and basic theory, as well as applications to the detection of cracks and the evaluation of material properties. The following topics are discussed: basic wave propagation theory for ultrasonic NDE; piezoelectric transducers, EMATS and ultrasonic spectroscopy; laser-based ultrasonics; acoustoelasticity; ultrasound in solids with porosity, microcracking and polycrystalline structuring; the determination of mechanical properties of composite materials; inverse problems and imaging.
Download or read book Quantitative Ultrasonic Evaluation of Mechanical Properties of Engineering Materials written by Alex Vary and published by . This book was released on 1978 with total page 37 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Quantitative Ultrasonic Evaluation of Mechnical Properties of Engineering Materials written by Alex Vary and published by . This book was released on 1979 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanics of Materials and Structures written by George Voyiadjis and published by Elsevier. This book was released on 2013-10-22 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wide range of topics in the area of mechanics of materials and structures are covered in this volume, ranging from analysis to design. There is no special emphasis on a specific area of research. The first section of the book deals with topics on the mechanics and damage of concrete. It also includes two papers on granular packing structure changes and cumulative damage in polymers. In the second part more theoretical topics in mechanics are discussed, such as shell theory and nonlinear elasticity. The following section dicusses areas dealing primarily with plasticity, viscoelasticity, and viscoplasticity. These include such topics as dynamic and cyclic plasticity. In the final section the subject is structural dynamics, including seismic analysis, composite frames and nonlinear analysis of bridges. The volume is compiled in honor of Professor Maciej P. Bieniek who has served as a teacher and researcher at several universities, and who has made many significant contributions in the evaluation, rehabilitation, and design of infrastructures.
Download or read book Elastic Waves in Composite Media and Structures written by Subhendu K. Datta and published by CRC Press. This book was released on 2019-04-23 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: New applications for composite materials are being developed at a rapid pace. However, their complex microstructures present considerable challenges for nondestructive testing and characterization. Ultrasonic waves provide quantitative means of nondestructive evaluation of these materials and structures. For this purpose, it is necessary to obtain
Download or read book Elastic Waves in Composite Media and Structures written by Subhendu K. Datta and published by . This book was released on 2009 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: New applications for composite materials are being developed at a rapid pace. However, their complex microstructures present considerable challenges for nondestructive testing and characterization. Ultrasonic waves provide quantitative means of nondestructive evaluation of these materials and structures. For this purpose, it is necessary to obtain
Download or read book NASA Technical Memorandum written by and published by . This book was released on 1988 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engine Structures written by and published by . This book was released on 1988 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ultrasonic and Electromagnetic NDE for Structure and Material Characterization written by Tribikram Kundu and published by CRC Press. This book was released on 2016-04-19 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most books on nondestructive evaluation (NDE) focus either on the theoretical background or on advanced applications. Bridging the gap between the two, Ultrasonic and Electromagnetic NDE for Structure and Material Characterization: Engineering and Biomedical Applications brings together the principles, equations, and applications of ultrasonic and
Download or read book Materials Characterization Using Nondestructive Evaluation NDE Methods written by Gerhard Huebschen and published by Woodhead Publishing. This book was released on 2016-03-23 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Characterization Using Nondestructive Evaluation (NDE) Methods discusses NDT methods and how they are highly desirable for both long-term monitoring and short-term assessment of materials, providing crucial early warning that the fatigue life of a material has elapsed, thus helping to prevent service failures. Materials Characterization Using Nondestructive Evaluation (NDE) Methods gives an overview of established and new NDT techniques for the characterization of materials, with a focus on materials used in the automotive, aerospace, power plants, and infrastructure construction industries. Each chapter focuses on a different NDT technique and indicates the potential of the method by selected examples of applications. Methods covered include scanning and transmission electron microscopy, X-ray microtomography and diffraction, ultrasonic, electromagnetic, microwave, and hybrid techniques. The authors review both the determination of microstructure properties, including phase content and grain size, and the determination of mechanical properties, such as hardness, toughness, yield strength, texture, and residual stress. Gives an overview of established and new NDT techniques, including scanning and transmission electron microscopy, X-ray microtomography and diffraction, ultrasonic, electromagnetic, microwave, and hybrid techniques Reviews the determination of microstructural and mechanical properties Focuses on materials used in the automotive, aerospace, power plants, and infrastructure construction industries Serves as a highly desirable resource for both long-term monitoring and short-term assessment of materials
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Health Monitoring 2006 written by Alfredo Güemes and published by DEStech Publications, Inc. This book was released on 2006 with total page 1458 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings of the Third European Workshop on Structural Health Monitoring held at the Conference Centre in Granada, Spain, in July of 2006 includes four keynote presentations and 170 technical papers written by an international group of contributors. Papers discuss technology and activities related to damage detection and evaluation in engin
Download or read book Ultrasonic Nondestructive Testing of Inhomogeneous Isotropic and Anisotropic Media Modeling and Imaging written by Chinta, Prashanth Kumar and published by kassel university press GmbH. This book was released on 2013-01-01 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis discusses ultrasonic testing by means of numerical modeling and image reconstruction techniques using elastic and acoustic wave fields. Numerical modeling of elastic waves (part one of the thesis) is used to understand the elastic wave scattering due to material defects and the propagation of surface waves in inhomogeneous isotropic and anisotropic media, with special emphasis on transversely isotropic and orthotropic media. Different imaging techniques (part two of the thesis) are investigated to develop a software, implemented in Matlab, which can give imaging results immediately after the measurement almost in real time as it can read and process the data obtained directly from the measurement. Acoustic wave scattering using analytical techniques and imaging techniques based on Radon transform are investigated. The data obtained from the Radon transform are subjected for imaging utilizing the filtered back projection algorithm and the Fourier slice theorem. The fundamentals of elastic wave propagation in solids are extensively elaborated. The point source synthesis to compute the Green’s functions for anisotropic media and the plane wave synthesis to compute slowness, phase and group velocity surfaces are studied. The elastic integral equations for the so called stretched coordinate system are derived. Based on these equations the numerical tool ’Three-dimensional Elastodynamic Finite Integration Technique’ (3D-EFIT) has been enhanced to treat not only isotropic media but also anisotropic media. For fast computation, the 3D-EFIT code using the Message Passing Interface (MPI) is used by which processing on massive parallel computers is made possible. In 3D-EFIT the Convolutional Perfectly Matched Layers (CPML) can also be applied to absorb the elastic body waves as well as the surface and evanescent waves. 3D-EFIT for homogeneous anisotropic media is validated by comparing computed Green’s functions with an analytical solution. After the validation, the applications of EFIT such as elastic wave modeling in inhomogeneous austenitic steel welds and inhomogeneous orthotropic wooden structures are presented. The results of the 2D-EFIT and 3D-EFIT modeling are compared against measurements performed at Federal Institute for Materials Research and Testing (BAM). After the modeling part of the thesis, inverse scattering techniques for fast imaging of inhomogeneities are studied. For three-dimensional imaging of defects in concrete, the Synthetic Aperture and Focusing Technique (SAFT) and Fourier Transformed Synthetic aperture Focusing Technique (FT-SAFT) are applied to data measured using a transducer array. The seismic Dip-Moveout (DMO) method has been utilized to convert measured bistatic data into monostatic data. A special treatment of SAFT as a technique for back propagation of the wave fields using time reversal, utilizing the knowledge of the geometry, is presented. Finally, time domain anisotropic SAFT (AnSAFT) is studied for image reconstruction of defects in inhomogeneous geometry with orthotropic crystal structure of the embedding medium.
Download or read book Advances in Smart Technologies in Structural Engineering written by Jan Holnicki-Szulc and published by Springer Science & Business Media. This book was released on 2004-09-22 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects invited lectures presented and discussed on the AMAS & ECCOMAS Workshop/Thematic Conference SMART'o3. The SMART'o3 Conference on Smart Materials and Structures was held in a 19th century palace in Jadwisin near Warsaw, 2-5 September 2003, Poland .It was organized by the Advanced Materials and Structures (AMAS) Centre of Excellence at the Institute of Fundamental Technological Research (IFTR) in Warsaw,ECCOMAS - European Community on Computational Methods in Applied Sciences and SMART-TECH Centre at IFTR. The idea of the workshop was to bring together and consolidate the community of Smart Materials and Structures in Europe. The workshop was attended by 66 participants from n European countries (Austria, Belgium, Finland, France, Germany, Italy, Poland, Portugal, Spain, U.K., Ukraine), 1 participant from Israel and 1 participant from the USA. The workshop program was grouped into the following major topics: 4 sessions on Structural Control (18 presentations), 3 sessions on Vibration Controland Dynamics (14 presentations), 2 sessions on Damage Identification (10 presentations), 2 sessions on Smart Materials (9 presentations). Each session was composed of an invited lecture and some contributed papers. Every paper scheduled in the program was presented, so altogether 51 presentations were given. No sessions were run in parallel. The workshop was attended not only by researchers but also by people closely related to the industry. There were interesting discussions on scientific merits of the presented papers as well as on future development of the field and its possible industrial applications.
Download or read book Identification of Damage Using Lamb Waves written by Zhongqing Su and published by Springer Science & Business Media. This book was released on 2009-09-01 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lamb waves are guided waves that propagate in thin plate or shell structures. There has been a clear increase of interest in using Lamb waves for identifying structural damage, entailing intensive research and development in this field over the past two decades. Now on the verge of maturity for diverse engineering applications, this emerging technique serves as an encouraging candidate for facilitating continuous and automated surveillance of the integrity of engineering structures in a cost-effective manner. In comparison with conventional nondestructive evaluation techniques such as ultrasonic scanning and radiography which have been well developed over half a century, damage identification using Lamb waves is in a stage of burgeoning development, presenting a number of technical challenges in application that need to be addressed and circumvented. It is these two aspects that have encouraged us to write this book, with the intention of consolidating the knowledge and know-how in the field of Lamb-wave-based damage identification, and of promoting widespread attention to mature application of this technique in the practical engineering sphere. This book provides a comprehensive description of key facets of damage identification technique using Lamb waves, based on the authors’ knowledge, comprehension and experience, ranging from fundamental theory through case studies to engineering applications.
Download or read book Ultrasonics International 93 written by Sam Stuart and published by Butterworth-Heinemann. This book was released on 2013-09-11 with total page 881 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrasonics International 93: Conference Proceedings presents a comprehensive account of the presentations given in the Ultrasonics International 93 conference. It discusses a blood flow mapping system using ultrasonic waves. It addresses the dynamical response functions of elastically anisotropic solids. Some of the topics covered in the book are the ultrasonic waves propagation in a liquid producing radicals; ultrasonic characterization of interfaces; surface acoustic wave measurements; line-focus-beam acoustic microscopy; investigation of fatigue cracks in steels using spherical lens scanning acoustic microscopy; and the phenomenon of ultrasonic light diffraction. The description of bichromatic tunable acousto-optic separator is fully covered. The diffraction phenomenon affecting the properties of the fibre-optic sensor system is discussed in detail. The text describes in depth the opto-acoustic measurement of ultrasound velocity in a solidifying polymer. The evaluation of microfracture due to thermal shock using acoustic emission is completely presented. A chapter is devoted to the detection of a weak adhesive and adherent interface in bonded joints. The book can provide useful information to engineers, students, and researchers.
Download or read book International Advances in Nondestructive Testing written by Warren J. McGonnagle and published by CRC Press. This book was released on 1986 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt:
