Download or read book Plastic Bending Theory And Applications written by T X Yu and published by World Scientific. This book was released on 1996-03-20 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the point of view of mechanics, this monograph systematically demonstrates the theory of plastic bending and its engineering applications; most of the contents of the book are based on the authors' research in the past decade. The monograph not only expounds the contributions of the authors to the fundamental theory of plastic bending, but also presents various applications of the theory in sheet metal forming, particularly in the analysis and prediction of springback and wrinkling of strips and plates subjected to bending or stamping. In addition to theoretical modelling, attention has also been paid to the development of related numerical methods; comparisons with experimental results are also presented.
Download or read book Structural Impact written by Norman Jones and published by Cambridge University Press. This book was released on 2011-12-26 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Impact is concerned with the behaviour of structures and components subjected to large dynamic, impact and explosive loads which produce inelastic deformations. It is of interest for safety calculations, hazard assessments and energy absorbing systems throughout industry. The first five chapters introduce the rigid plastic methods of analysis for the static behaviour and the dynamic response of beams, plates and shells. The influence of transverse shear, rotatory inertia, finite displacements and dynamic material properties are introduced and studied in some detail. Dynamic progressive buckling, which develops in several energy absorbing systems, and the phenomenon of dynamic plastic buckling are introduced. Scaling laws are discussed which are important for relating the response of small-scale experimental tests to the dynamic behaviour of full-scale prototypes. This text is invaluable to undergraduates, graduates and professionals learning about the behaviour of structures subjected to large impact, dynamic and blast loadings producing an inelastic response.
Download or read book Engineering Solid Mechanics written by Abdel-Rahman A. Ragab and published by Routledge. This book was released on 2018-02-06 with total page 948 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Solid Mechanics bridges the gap between elementary approaches to strength of materials and more advanced, specialized versions on the subject. The book provides a basic understanding of the fundamentals of elasticity and plasticity, applies these fundamentals to solve analytically a spectrum of engineering problems, and introduces advanced topics of mechanics of materials - including fracture mechanics, creep, superplasticity, fiber reinforced composites, powder compacts, and porous solids. Text includes: stress and strain, equilibrium, and compatibility elastic stress-strain relations the elastic problem and the stress function approach to solving plane elastic problems applications of the stress function solution in Cartesian and polar coordinates Problems of elastic rods, plates, and shells through formulating a strain compatibility function as well as applying energy methods Elastic and elastic-plastic fracture mechanics Plastic and creep deformation Inelastic deformation and its applications This book presents the material in an instructive manner, suitable for individual self-study. It emphasizes analytical treatment of the subject, which is essential for handling modern numerical methods as well as assessing and creating software packages. The authors provide generous explanations, systematic derivations, and detailed discussions, supplemented by a vast variety of problems and solved examples. Primarily written for professionals and students in mechanical engineering, Engineering Solid Mechanics also serves persons in other fields of engineering, such as aerospace, civil, and material engineering.
Download or read book Design of Curved Steel written by Charles King and published by . This book was released on 2001-12-01 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Intermediate Mechanics of Materials written by J. R. Barber and published by Springer Science & Business Media. This book was released on 2010-11-02 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the essential topics for a second-level course in strength of materials or mechanics of materials, with an emphasis on techniques that are useful for mechanical design. Design typically involves an initial conceptual stage during which many options are considered. At this stage, quick approximate analytical methods are crucial in determining which of the initial proposals are feasible. The ideal would be to get within 30% with a few lines of calculation. The designer also needs to develop experience as to the kinds of features in the geometry or the loading that are most likely to lead to critical conditions. With this in mind, the author tries wherever possible to give a physical and even an intuitive interpretation to the problems under investigation. For example, students are encouraged to estimate the location of weak and strong bending axes and the resulting neutral axis of bending before performing calculations, and the author discusses ways of getting good accuracy with a simple one degree of freedom Rayleigh-Ritz approximation. Students are also encouraged to develop a feeling for structural deformation by performing simple experiments in their outside environment, such as estimating the radius to which an initially straight bar can be bent without producing permanent deformation, or convincing themselves of the dramatic difference between torsional and bending stiffness for a thin-walled open beam section by trying to bend and then twist a structural steel beam by hand-applied loads at one end. In choosing dimensions for mechanical components, designers will expect to be guided by criteria of minimum weight, which with elementary calculations, generally leads to a thin-walled structure as an optimal solution. This consideration motivates the emphasis on thin-walled structures, but also demands that students be introduced to the limits imposed by structural instability. Emphasis is also placed on the effect of manufacturing errors on such highly-designed structures - for example, the effect of load misalignment on a beam with a large ratio between principal stiffness and the large magnification of initial alignment or loading errors in a strut below, but not too far below the buckling load. Additional material can be found on http://extras.springer.com/ .
Download or read book Advanced Mechanics of Materials written by Arthur P. Boresi and published by John Wiley & Sons. This book was released on 2002-10-22 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on the success of five previous editions, this new sixth edition continues to present a unified approach to the study of the behavior of structural members and the development of design and failure criteria. The text treats each type of structural member in sufficient detail so that the resulting solutions are directly applicable to real-world problems. New examples for various types of member and a large number of new problems are included. To facilitate the transition from elementary mechanics of materials to advanced topics, a review of the elements of mechanics of materials is presented along with appropriate examples and problems.
Download or read book Roark s Formulas for Stress and Strain written by Warren Clarence Young and published by McGraw-Hill Europe. This book was released on 2002 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ultimate resource for designers, engineers, and analyst working with calculations of loads and stress.
Download or read book The Plastic Methods of Structural Analysis written by Bernard George Neal and published by Taylor & Francis. This book was released on 1977-01-01 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Plasticity written by Jagabandhu Chakrabarty and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 695 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical engineering, an engineering discipline forged and shaped by the needs of the industrial revolution, is once again asked to do its substantial share in the call for industrial renewal. The general call is urgent as we face profound issues of productivity and competitiveness that require engineering solutions, among others . The Mechanical Engineering Series features graduate texts and research monographs intended to address the need for information in contemporary areas of mechanical engineering. The series is conceived as a comprehensive one that covers a broad range of c- centrations important to mechanical engineering graduate education and research . We are fortunate to have a distinguished roster of consulting editors on the ad- sory board, each an expert in one of the areas of concentration . The names of the consulting editors are listed on the facing page of this volume . The areas of conc- tration are applied mechanics, biomechanics, computational mechanics, dynamic systems and control, energetics , mechanics of materials, processing, production systems, thermal science, and tribology .
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1974 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guide to Stability Design Criteria for Metal Structures written by Ronald D. Ziemian and published by John Wiley & Sons. This book was released on 2010-02-08 with total page 1120 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive guide to stability design criteria, fully updated and incorporating current research Representing nearly fifty years of cooperation between Wiley and the Structural Stability Research Council, the Guide to Stability Design Criteria for Metal Structures is often described as an invaluable reference for practicing structural engineers and researchers. For generations of engineers and architects, the Guide has served as the definitive work on designing steel and aluminum structures for stability. Under the editorship of Ronald Ziemian and written by SSRC task group members who are leading experts in structural stability theory and research, this Sixth Edition brings this foundational work in line with current practice and research. The Sixth Edition incorporates a decade of progress in the field since the previous edition, with new features including: Updated chapters on beams, beam-columns, bracing, plates, box girders, and curved girders. Significantly revised chapters on columns, plates, composite columns and structural systems, frame stability, and arches Fully rewritten chapters on thin-walled (cold-formed) metal structural members, stability under seismic loading, and stability analysis by finite element methods State-of-the-art coverage of many topics such as shear walls, concrete filled tubes, direct strength member design method, behavior of arches, direct analysis method, structural integrity and disproportionate collapse resistance, and inelastic seismic performance and design recommendations for various moment-resistant and braced steel frames Complete with over 350 illustrations, plus references and technical memoranda, the Guide to Stability Design Criteria for Metal Structures, Sixth Edition offers detailed guidance and background on design specifications, codes, and standards worldwide.
Download or read book Strength of Materials written by John Case and published by Elsevier. This book was released on 2013-10-22 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Strength of Materials: An Introduction to the Analysis of Stress and Strain is 22-chapter introductory text to the problems of stress and strain analysis. The first chapters explore the fundamental and basic topics on stress and strain, including tension, compression, pin-jointed frames, joints, and connections. The next chapters consider the application of combined simple direct and shearing stresses in practical situations. Other chapters treat topics on plastic, elastic, and strain, as well as problems of thin-walled tubes in bending and torsion. This text also explores the analytical uses of the principle of virtual work, strain energy, and complementary energy. The last chapters review problems of vibrations and dynamic and impact stresses. This book is directed toward undergraduate engineering students.
Download or read book Rules of Thumb for Mechanical Engineers written by J. Edward Pope and published by Gulf Professional Publishing. This book was released on 1997 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluids -- Heat transfer -- Thermodynamics -- Mechanical seals -- Pumps and compressors -- Drivers -- Gears -- Bearings -- Piping and pressure vessels -- Tribology -- Vibration -- Materials -- Stress and strain -- Fatigue -- Instrumentation -- Engineering economics.
Download or read book Advanced Mechanics of Solids written by K.B.M Nambudiripad and published by ALPHA SCIENCE INTERNATIONAL LIMITED. This book was released on 2017-12-04 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: ADVANCED MECHANICS OF SOLIDS: A Gentle Introduction is meant for the students who seem to have much difficulty with this subject. It tries to present the crucial concepts gently and painlessly in the early chapters, but without sacrificing rigour. Copious footnotes and a large chapter of more than sixty illustrative examples are a feature of the book. These illustrative examples do not include all numerical problems.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1992 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Shock and Vibration Digest written by and published by . This book was released on 1986 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Structural Stability written by George Gerard and published by . This book was released on 1959 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
