Download or read book Analysis of Energy Efficiency of Industrial Processes written by Vladimir S. Stepanov and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is universally recognized that the end of the current and the beginning of the next century will be characterized by a radical change in the existing trends in the economic development of all countries and a transition to new principles of economic management on the basis of a resource and energy conservation policy. Thus there is an urgent necessity to study methods, technical aids and economic consequences of this change, and particularly, to determine the possible amounts of energy resources which could be conserved (energy "reserves") in different spheres of the national economy. An increased interest towards energy conservation in industry, one of the largest energy consumers, is quite natural and is manifested by the large num ber of publications on this topic. But the majority of publications are devoted to the solution of narrowly defined problems, determination of energy reserves in specific processes and plants, efficiency estimation of individual energy conserva tion measures, etc. However, it is necessary to develop a general methodological approach to the solution of such problems and create a scientific and methodical base for realizing an energy conservation policy. Such an effort is made in this book, which is concerned with methods for studying energy use efficiency in technological processes and estimation of the theoretical and actual energy reserves in a given process, technology, or industrial sector on the basis of their complete energy balances.

Download or read book Efficiency of Manufacturing Processes written by Wen Li and published by Springer. This book was released on 2015-06-13 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents a reliable methodology for characterising the energy and eco-efficiency of unit manufacturing processes. The Specific Energy Consumption, SEC, will be identified as the key indicator for the energy efficiency of unit processes. An empirical approach will be validated on different machine tools and manufacturing processes to depict the relationship between process parameters and energy consumptions. Statistical results and additional validation runs will corroborate the high level of accuracy in predicting the energy consumption. In relation to the eco-efficiency, the value and the associated environmental impacts of manufacturing processes will also be discussed. The interrelationship between process parameters, process value and the associated environmental impact will be integrated in the evaluation of eco-efficiency. The book concludes with a further investigation of the results in order to develop strategies for further efficiency improvement. The target audience primarily comprises researchers and experts in the field, but the book may also be beneficial for graduate students.

Download or read book Energy Management and Efficiency for the Process Industries written by Alan P. Rossiter and published by John Wiley & Sons. This book was released on 2015-03-25 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a unique overview of energy management for the process industries Provides an overall approach to energy management and places the technical issues that drive energy efficiency in context Combines the perspectives of freewheeling consultants and corporate insiders In two sections, the book provides the organizational framework (Section 1) within which the technical aspects of energy management, described in Section 2, can be most effectively executed Includes success stories from three very different companies that have achieved excellence in their energy management efforts Covers energy management, including the role of the energy manager, designing and implementing energy management programs, energy benchmarking, reporting, and energy management systems Technical topics cover efficiency improvement opportunities in a wide range of utility systems and process equipment types, as well as techniques to improve process design and operation

Download or read book The Efficiency of Industrial Processes written by M. V. Sorin and published by Elsevier Publishing Company. This book was released on 1994 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardbound. The subject of this book is the exergy analysis of the efficiency of processes involving energy and matter transformations. Efficiency is one of the most important criteria used in evaluating the performance of all types of processing plants; in particular those of the energy and chemical industries. The beauty of the exergetic approach to thermodynamic analysis is that it permits a universally applicable definition of efficiency and is free of contradictions in its treatment of numerous and diverse systems. The book provides the reader with the quantitative methods and calculations of efficiency considered to be applicable to different systems and their components. Methods, procedures and instructions for using the efficiency analysis in optimizing the performance of thermal, chemical and other industrial plants are also given. Numerous examples are used in the book to aid the reader in understanding the concepts of efficiency, exergy and thei

Download or read book Potential for Industrial Energy Efficiency Improvement in the Long Term written by J. de Beer and published by Springer Science & Business Media. This book was released on 2000-05-31 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: We need to know what opportunities there are and what limits exist to the improvement of energy efficiency, since this is the most cost-effective way to abate greenhouse gas emissions. This book presents a method whereby promising technologies can be identified and characterised that can contribute to an improvement of energy efficiency in the long term. An objective measurement of maximum improvement is provided by an analysis of the theoretical minimum specific energy demand. A descriptive inventory is then given of new and conceivable technologies that can improve efficiency, extending beyond the standard lists found in the literature. The method is applied to three main energy consuming branches of industry: paper and board, iron and steel, and nitrogen fertilizer. Each of the studies provides an in-depth analysis of the industry and an extensive survey of options for its improvement.

Download or read book Analysis of Energy Efficiency of Industrial Processes written by Vladimir S. Stepanov and published by Springer. This book was released on 1993-03-18 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is universally recognized that the end of the current and the beginning of the next century will be characterized by a radical change in the existing trends in the economic development of all countries and a transition to new principles of economic management on the basis of a resource and energy conservation policy. Thus there is an urgent necessity to study methods, technical aids and economic consequences of this change, and particularly, to determine the possible amounts of energy resources which could be conserved (energy "reserves") in different spheres of the national economy. An increased interest towards energy conservation in industry, one of the largest energy consumers, is quite natural and is manifested by the large num ber of publications on this topic. But the majority of publications are devoted to the solution of narrowly defined problems, determination of energy reserves in specific processes and plants, efficiency estimation of individual energy conserva tion measures, etc. However, it is necessary to develop a general methodological approach to the solution of such problems and create a scientific and methodical base for realizing an energy conservation policy. Such an effort is made in this book, which is concerned with methods for studying energy use efficiency in technological processes and estimation of the theoretical and actual energy reserves in a given process, technology, or industrial sector on the basis of their complete energy balances.

Download or read book Improving Energy Efficiency in Industrial Energy Systems written by Patrik Thollander and published by Springer Science & Business Media. This book was released on 2012-08-10 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial energy efficiency is one of the most important means of reducing the threat of increased global warming. Research however states that despite the existence of numerous technical energy efficiency measures, its deployment is hindered by the existence of various barriers to energy efficiency. The complexity of increasing energy efficiency in manufacturing industry calls for an interdisciplinary approach to the issue. Improving energy efficiency in industrial energy systems applies an interdisciplinary perspective in examining energy efficiency in industrial energy systems, and discusses how “cross-pollinating” perspectives and theories from the social and engineering sciences can enhance our understanding of barriers, energy audits, energy management, policies, and programmes as they pertain to improved energy efficiency in industry. Apart from classical technical approaches from engineering sciences, Improving energy efficiency in industrial energy systems couples a sociotechnical perspective to increased energy efficiency in industry, showing that industrial energy efficiency can be expected to be shaped by social and commercial processes and built on knowledge, routines, institutions, and methods established in networks. The book can be read by researchers and policy-makers, as well as scholars and practicians in the field. “This book is extremely valuable for anyone who is designing or executing energy efficiency policies, schemes or projects aiming at SMEs. Both authors deserve the highest respect, and the combination of their expertise makes the results truly unique.” - Daniel Lundqvist, programme manager at the Swedish energy agency “For anyone interested in improving energy efficiency in industry, this is a must-read. The book combines tools from social science and engineering to discuss the state of art today as well as possible development path tomorrow. This is a compelling book that I find useful both in my teaching and my research.” - Kajsa Ellegård, Professor at Linköping University, Sweden "The book Improving energy efficiency in industrial energy systems is a novel approach on how improved levels of energy efficiency can be reached in industrial energy systems by merging engineering with social sciences. It is with delight that I can recommend their book to anyone interested in the field.”- Mats Söderström, Director Energy Systems Programme, Linköping University, Sweden

Download or read book Energy Efficiency in Industry written by J. Sirchis and published by CRC Press. This book was released on 1988-08-04 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a workshop organized by the Commission of the European Communities, Directorate-General for Energy, Berlin, Germany, 19-20 October 1987.

Download or read book Potential for Industrial Energy Efficiency Improvement in the Long Term written by J. de Beer and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book does not give a prediction of what the efficiency will be of the energy use of industrial processes in the future. However, it does give an exploration of limits to the efficiency of current processes and an indication of what might be achieved if new technologies can be developed. At the Department of Science, Technology and Society of Utrecht University research had been done to the opportunities for improvement of the energy efficiency in the short term since the 1980's. This had resulted in a comprehensive database on energy efficient measures. This database and a possible application are described in Chapter 3 of this book. The use of the database induced new research themes around efficiency improvement, e.g. concerning barriers for implementation of measures. It was around 1993 that I did a preliminary study to the potential for efficiency improvement in the long term. Historical analysis had shown us that the short term potential stayed constant over the years. It seemed to be replenished by the introduction of new technologies. This lead to the question whether there are limits to the efficiency, taking into account both thermodynamic considerations and ideas on the development and dissemination of new technologies.

Download or read book Real Prospects for Energy Efficiency in the United States written by National Research Council and published by National Academies Press. This book was released on 2010-06-10 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: America's economy and lifestyles have been shaped by the low prices and availability of energy. In the last decade, however, the prices of oil, natural gas, and coal have increased dramatically, leaving consumers and the industrial and service sectors looking for ways to reduce energy use. To achieve greater energy efficiency, we need technology, more informed consumers and producers, and investments in more energy-efficient industrial processes, businesses, residences, and transportation. As part of the America's Energy Future project, Real Prospects for Energy Efficiency in the United States examines the potential for reducing energy demand through improving efficiency by using existing technologies, technologies developed but not yet utilized widely, and prospective technologies. The book evaluates technologies based on their estimated times to initial commercial deployment, and provides an analysis of costs, barriers, and research needs. This quantitative characterization of technologies will guide policy makers toward planning the future of energy use in America. This book will also have much to offer to industry leaders, investors, environmentalists, and others looking for a practical diagnosis of energy efficiency possibilities.

Download or read book Energy Efficiency in Industrial Processes written by Commission of the European Communities. Non-nuclear Energy R&D Programme and published by . This book was released on 1989-12-31 with total page 45 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Manufacturing Process Controls for the Industries of the Future written by National Research Council and published by National Academies Press. This book was released on 1998-08-14 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing process controls include all systems and software that exert control over production processes. Control systems include process sensors, data processing equipment, actuators, networks to connect equipment, and algorithms to relate process variables to product attributes. Since 1995, the U.S. Department of Energy Office of Industrial Technology 's (OIT) program management strategy has reflected its commitment to increasing and documenting the commercial impact of OIT programs. OIT's management strategy for research and development has been in transition from a "technology push" strategy to a "market pull" strategy based on the needs of seven energy-and waste-intensive industries-steel, forest products, glass, metal casting, aluminum, chemicals, and petroleum refining. These industries, designated as Industries of the Future (IOF), are the focus of OIT programs. In 1997, agriculture, specifically renewable bioproducts, was added to the IOF group. The National Research Council Panel on Manufacturing Process Controls is part of the Committee on Industrial Technology Assessments (CITA), which was established to evaluate the OIT program strategy, to provide guidance during the transition to the new IOF strategy, and to assess the effects of the change in program strategy on cross-cutting technology programs, that is, technologies applicable to several of the IOF industries. The panel was established to identify key processes and needs for improved manufacturing control technology, especially the needs common to several IOF industries; identify specific research opportunities for addressing these common industry needs; suggest criteria for identifying and prioritizing research and development (R&D) to improve manufacturing controls technologies; and recommend means for implementing advances in control technologies.

Download or read book Energy Analysis of 108 Industrial Processes written by Harry L. Brown and published by The Fairmont Press, Inc.. This book was released on 1996 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is the most complete reference ever developed for identifying quantity and quality of industrial waste energy which may be economically practical to recover. Based on years of research, the detailed heat and material balances which are presented were developed from process flow diagrams of 108 industrial processes, with technical input from consultants and manufacturers, and extensive on-site verification studies. Data such as process temperature, pressure, fuel requirements, thermal efficiency and radiation, and convection losses are determined for varying industrial operations spanning the food products, textile, lumber and wood, paper, chemical, petroleum, rubber and plastics, glass, metals, machinery, transportation equipment, and instrument manufacturing industries.

Download or read book Energy Efficient Manufacturing written by John W. Sutherland and published by John Wiley & Sons. This book was released on 2018-08-14 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last several years, manufacturers have expressed increasing interest in reducing their energy consumption and have begun to search for opportunities to reduce their energy usage. In this book, the authors explore a variety of opportunities to reduce the energy footprint of manufacturing. These opportunities cover the entire spatial scale of the manufacturing enterprise: from unit process-oriented approaches to enterprise-level strategies. Each chapter examines some aspect of this spatial scale, and discusses and describes the opportunities that exist at that level. Case studies demonstrate how the opportunity may be acted on with practical guidance on how to respond to these opportunities.

Download or read book Introduction to Industrial Energy Efficiency written by Patrik Thollander and published by Academic Press. This book was released on 2020-01-29 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Industrial Energy Efficiency: Energy Auditing, Energy Management, and Policy Issues offers a systemic overview of all key-aspects involved in improving industrial energy efficiency in various industry sectors. It is organized in three parts, each dealing with a particular perspective needed to form a complete view of related issues. Sections focus on energy auditing and improved energy efficiency of companies from a predominantly technical perspective, shed light on energy management and factors that hinder or drive the adoption of energy efficiency practices in the manufacturing industry, and explore energy efficiency policy instruments and how they are designed, implemented and evaluated. Practicing engineers in the field of energy efficiency, engineering and energy researchers coming into the field, and graduate students will find this book to be an invaluable reference on the fundamental knowledge they need to get started in this area. Provides, in one volume, a comprehensive overview of energy systems efficiency and management that is applied to various industrial processes Explores operational measures for improvement, including case studies from varying countries and sectors Discusses the barriers to, and driving forces for, improving energy efficiency in industrial settings, including technical, behavioral, organizational and policy aspects

Download or read book Simulation of Industrial Processes for Control Engineers written by Philip J Thomas and published by Elsevier. This book was released on 1999-07-13 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer simulation is the key to comprehending and controlling the full-scale industrial plant used in the chemical, oil, gas and electrical power industries. Simulation of Industrial Processes for Control Engineers shows how to use the laws of physics and chemistry to produce the equations to simulate dynamically all the most important unit operations found in process and power plant.The book explains how to model chemical reactors, nuclear reactors, distillation columns, boilers, deaerators, refrigeration vessels, storage vessels for liquids and gases, liquid and gas flow through pipes and pipe networks, liquid and gas flow through installed control valves, control valve dynamics (including nonlinear effects such as static friction), oil and gas pipelines, heat exchangers, steam and gas turbines, compressors and pumps, as well as process controllers (including three methods of integral desaturation). The phenomenon of markedly different time responses ("stiffness") is considered and various ways are presented to get around the potential problem of slow execution time. The book demonstrates how linearization may be used to give a diverse check on the correctness of the as-programmed model and explains how formal techniques of model validation may be used to produce a quantitative check on the simulation model's overall validity.The material is based on many years' experience of modelling and simulation in the chemical and power industries, supplemented in recent years by university teaching at the undergraduate and postgraduate level. Several important new results are presented. The depth is sufficient to allow real industrial problems to be solved, thus making the book attractive to engineers working in industry. But the book's step-by-step approach makes the text appropriate also for post-graduate students of control engineering and for undergraduate students in electrical, mechanical and chemical engineering who are studying process control in their second year or later.

Download or read book Optimization of Industrial Unit Processes Second Edition written by Bela G. Liptak and published by CRC Press. This book was released on 1998-10-28 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Optimization of Industrial Unit Processes, the term "optimization" means the maximizing of productivity and safety while minimizing operating costs. In a fully optimized plant, efficiency and productivity are continuously maximized while levels, temperatures, pressures, or flows float within their allowable limits. This control philosophy differs from earlier approaches - where levels and temperatures were controlled at constant values, and plant productivity was only an accidental, uncontrolled consequence of those controlled variables. With this approach, the sides of a multivariable control envelope are the various constraints while inside the envelope the process is continuously moved to maximize efficiency and productivity. Because one must understand a process before one can control it (let alone optimize it), Optimization of Industrial Unit Processes discusses the "personality" and characteristics of each process in term of its time constants, gains, and other unique features. This book provides information for engineers who design or operate industrial plants and who seek to increase the profitability of their plants. It recognizes that all industrial processes involve operations such as material transportation, heat transfer, and reactions. Therefore each plant consists of a combination of basic unit operations and can be optimized by maximizing the efficiency, and minimizing the operating cost, of the individual unit operations from which it is composed. Optimization of Industrial Unit Processes discusses real world processes - where pipes leak, sensors plug, and pumps cavitate - offering practical solutions to real problems. Each control system described in the book works, illustrating the state of the art in controlling a particular unit operation. This second edition reflects the continual improvement and evolution of control systems as well as anticipates future advances. Béla G. Lipták speaks on Post-Oil Energy Technology on the AT&T Tech Channel.