EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Transient Stability and Power Flow Models of the Unified Power Flow Controller for Various Control Strategies

Download or read book Transient Stability and Power Flow Models of the Unified Power Flow Controller for Various Control Strategies written by Reeve, J. (John) and published by . This book was released on 2004 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book The Use of Unified Power Flow Controller to Enhance Power System Stability

Download or read book The Use of Unified Power Flow Controller to Enhance Power System Stability written by Zhaojun Meng and published by . This book was released on 2001 with total page 79 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Power System Dynamics

Download or read book Power System Dynamics written by K. R. Padiyar and published by Anshan Pub. This book was released on 2004 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is divided into five parts with a total of 14 chapters. The first part begins by introducing the basic concepts of stability. The second part develops the system model in detail. Part three presents the small signal stability analysis applied to the problem of low frequency oscillations. Part four presents the SSR phenomenon and part five deals with the transient stability problem. The basic concepts of voltage stability and methods of analysis are discussed in Appendix A.

Book Study the Power Flow Control of a Power System with Unified Power Flow Controller

Download or read book Study the Power Flow Control of a Power System with Unified Power Flow Controller written by Vakula Peesari and published by . This book was released on 2010 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical power systems is a large interconnected network that requires a careful design to maintain the system with continuous power flow operation without any limitations. Flexible Alternating Current Transmission System (FACTS) is an application of a power electronics device to control the power flow and to improve the system stability of a power system. Unified Power Flow Controller (UPFC) is a versatile device in the FACTS family of controllers which has the ability to simultaneously control all the transmission parameters of power systems i.e. voltage, impedance and phase angle which determines the power flow of a transmission line. This project proposes a case study to control the power flow of a power system with UPFC. In this study, I am considering a standard 5-bus network for the analysis. Power flow equations are solved using Newton Raphson's algorithm and the simulations of the algorithm are done in MATLAB. The results of the network with and without UPFC are compared in terms of active and reactive power flow in the transmission line at the bus to analyze the performance of UPFC.

Book Unified Power Flow Controller Technology and Application

Download or read book Unified Power Flow Controller Technology and Application written by Jijun Yin and published by Academic Press. This book was released on 2017-06-16 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unified Power Flow Controller Technology and Application provides comprehensive coverage on UPFC technology, providing a range of topics, including design principle, control and protection, and insulation coordination. It summarizes all the most up-to-date research and practical achievements that are related to UPFC and MMC technology, including test techniques for main components, closed-loop test techniques for control and protection systems, and onsite techniques for implementing UPFC projects. The book is an essential reference book for both academics and engineers working in power system protection control, power system planning engineers, and HVDC FACTS related areas. Readers will not only obtain the detailed information regarding theoretical analysis and practical application of UPFC, but also the control mechanism of advanced MMC technology, both of which are not common topics in previously published books. Shows how to use modular multilevel converters (MMC) to implement UPFC that lead to cost-effective and reliable systems Draws from the most up-to-date research and practical applications Teaches electromechanical/electromagnetic transient simulation techniques and real-time closed-loop simulation test techniques of the MMC based UPFC

Book Transient Stability of Power Systems

Download or read book Transient Stability of Power Systems written by Mania Pavella and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: The market liberalization is expected to affect drastically the operation of power systems, which under economical pressure and increasing amount of transactions are being operated much closer to their limits than previously. These changes put the system operators faced with rather different and much more problematic scenarios than in the past. They have now to calculate available transfer capabilities and manage congestion problems in a near on line environment, while operating the transmission system under extremely stressed conditions. This requires highly reliable and efficient software aids, which today are non-existent, or not yet in use. One of the most problematic issues, very much needed but not yet en countered today, is on-line dynamic security assessment and control, enabling the power system to withstand unexpected contingencies without experienc ing voltage or transient instabilities. This monograph is devoted to a unified approach to transient stability assessment and control, called SIngle Machine Equivalent (S1ME).

Book Advances in Renewable Energy and Sustainable Environment

Download or read book Advances in Renewable Energy and Sustainable Environment written by Lillie Dewan and published by Springer Nature. This book was released on 2020-11-04 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the select peer-reviewed proceedings of the National Conference on Renewable Energy and Sustainable Environment (NCRESE) 2019. The book brings together the latest developments in harvesting, storing and optimizing alternate and renewable energy resources. It covers latest developments in green energy technologies as well as smart grids, and their applications towards a sustainable environment. The book can be useful for beginners, academicians, entrepreneurs, and professionals interested in renewable energy technologies and sustainable environment practices.

Book Optimal Control Schemes for Power System with Unified Power Flow Controller UPFC

Download or read book Optimal Control Schemes for Power System with Unified Power Flow Controller UPFC written by Dr. Hidaia Mahmood Alassouli and published by Dr. Hidaia Mahmood Alassouli. This book was released on 2021-04-18 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: FACTS are one aspect of power electronics revolution that is taking place in all areas of electrical energy. A variable of powerful semiconductor devices not only offer the advantage of high speed and reliability of switching but, more importantly, the opportunity offered by a variety of innovative circuit concepts based on these power devices enhance the value of electric energy. In generation area, the potential application of power electronics is largely in renewable generation. Photovoltaic and fuel cells requires conversion of dc to ac. Generation with variable speed is necessary for economic viability of wind and small hydro generators. Variable-speed wind generators and small hydro generators requires conversion of variable frequency ac to power system frequency. These applications of power electronics in renewable generation area require converter sizes in the range of few kilowatts to few megawatts. In coming decades, electrical energy storage is expected to be widely used in power systems as capacitor, battery and superconducting magnet technologies move forward. Batteries are widely used already for emergency power supplies. These require ac/dc/ac converters in the range of a few kilowatts to a few tens of megawatts. On the other hand, variable speed hydro storage requires converters of up to a few hundred megawatts. In transmission area, application of power electronics consists of High Voltage Direct Current (HVDC) power transmission and FACTS. HVDC is often an economical way to interconnect certain power systems, which are suited in different regions separated by long distances or those have different frequencies or incompatible frequency control. HVDC involves conversion of ac to dc at one end and conversion of dc to ac at the other end. What is most interesting for transmission planners is that FACTS opens up new opportunities for controlling power and enhancing the usable capacity of the lines. The possibility that current through a line can be controlled at reasonable cost enables a large potential of increasing the capacity of the existing lines with larger conductors, and use one of the FACTS controllers to enable corresponding power to flow through lines under normal and contingency conditions. These opportunities arise through the ability of FACTS controllers to control the interrelated parameters that govern the operation of transmission line including series impedance, shunt impedance, current, voltage, phase angle, and the damping of oscillations at various frequencies below the rated frequency. In distribution area, an exciting opportunity called Custom Power. The custom power concept incorporates power electronics controllers and switching equipment, one or more of which can be used to provide a value-added service to the customers. In general, these custom service applications represent power electronics in the range of few tens of kilowatts to few ten of megawatts of conversion or switching equipment between the utility supply and customer. On the end-user side, power electronics conversion and switching technology has been fast growing area. Complementing the Custom Power technology is the whole area of power conditioning technology used by customers, under the term Power Quality. Uninterruptible power supplies (UPS) and voltage regulators represent the major growth area in power electronics. In end use, the converter sizes range from a few watts to ten of megawatts. The term active filter is a general one and is applied to a group of power electronic circuits incorporating power switching devices and passive energy storage circuit elements such as inductors and capacitors. The functions of these circuits vary depending on the applications. They are generally used for controlling current harmonics in supply networks at the low and medium voltage distribution level or for reactive power and/or voltage control at high voltage distribution level. These functions may be combined in a single circuit or in separate active filters. Most of the control schemes introduced in the existing papers were designed either for eliminating current harmonics or eliminating voltage flickers or for load flow control. So, this work is devoted to find a proper optimal control schemes for a system with series or shunt or series and shunt converters that can provide all functions together. Various optimal control schemes will be designed for systems with series, shunt and series-shunt converters with the objective to control the load flow through a lines and to eliminate current harmonics and voltage flickers with different strategies for tracking. · Part 1: Gives the description of optimal control design. · Part 2: Case studies to design different optimal control schemes for system with UPFC unit to control the power flow, eliminate voltage flicker and eliminate current harmonics. The case studies were repeated for system with only series or shunt converters.

Book Electrical Engineering and Control

Download or read book Electrical Engineering and Control written by Min Zhu and published by Springer Science & Business Media. This book was released on 2011-06-21 with total page 1050 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes extended and revised versions of a set of selected papers from the International Conference on Electric and Electronics (EEIC 2011) , held on June 20-22 , 2011, which is jointly organized by Nanchang University, Springer, and IEEE IAS Nanchang Chapter. The objective of EEIC 2011 Volume 2 is to provide a major interdisciplinary forum for the presentation of new approaches from Electrical engineering and controls, to foster integration of the latest developments in scientific research. 133 related topic papers were selected into this volume. All the papers were reviewed by 2 program committee members and selected by the volume editor Prof. Min Zhu. We hope every participant can have a good opportunity to exchange their research ideas and results and to discuss the state of the art in the areas of the Electrical engineering and controls.

Book Inter area Oscillations in Power Systems

Download or read book Inter area Oscillations in Power Systems written by Arturo Roman Messina and published by Springer Science & Business Media. This book was released on 2009-04-21 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of complex dynamic processes governed by nonlinear and nonstationary characteristics is a problem of great importance in the analysis and control of power system oscillatory behavior. Power system dynamic processes are highly random, nonlinear to some extent, and intrinsically nonstationary even over short time intervals as in the case of severe transient oscillations in which switching events and control actions interact in a complex manner. Phenomena observed in power system oscillatory dynamics are diverse and complex. Measured ambient data are known to exhibit noisy, nonstationary fluctuations resulting primarily from small magnitude, random changes in load, driven by low-scale motions or nonlinear trends originating from slow control actions or changes in operating conditions. Forced oscillations resulting from major cascading events, on the other hand, may contain motions with a broad range of scales and can be highly nonlinear and time-varying. Prediction of temporal dynamics, with the ultimate application to real-time system monitoring, protection and control, remains a major research challenge due to the complexity of the driving dynamic and control processes operating on various temporal scales that can become dynamically involved. An understanding of system dynamics is critical for reliable inference of the underlying mechanisms in the observed oscillations and is needed for the development of effective wide-area measurement and control systems, and for improved operational reliability.