Download or read book Automotive Recycling Plastics and Sustainability written by David Schönmayr and published by Springer. This book was released on 2017-05-31 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides transdisciplinary analyses of the automotive plastics production and recycling system, including prognoses, scenarios and solutions for corporate sustainability management. A book on plastics, not written by a plastics guy. But a sustainability guy. Plastics schizophrenia and the automotive abyss: The industry is facing a severe challenge. It is the inevitable and promising change towards a sustainable economy. However, the automotive industry is primarily concerned with the CO2 emissions from cars when driving, while the rise of lightweight plastics, electric drive and heavy batteries make the production and end-of-life phase ever more important. Therefore, the currently increasing use of non-sustainable virgin plastics in cars has to be tackled. The plastics and the automotive industry now have a chance, and this chance is the Recycling Renaissance. This book offers: • Holistic and transdisciplinary overview on sustainability and automotive plastics from all angles including economy, ecology, technology, and politics with a focus on Europe • Concise analyses, prognoses, tools and a roadmap with solutions for companies, developed together with international experts from industry and academia • Strong scientific basis and independent research including a Europe-wide survey, expert interviews, and workshops • More than 80 illustrations and 15 tables including a SCOT analysis • Executive summaries after each chapter for fast reading “The uniqueness of this book lies within the different point of view on this topic from a critical, outstanding scientist.” - Univ.-Prof. Dipl.-Ing. Dr.mont. Pomberger, Montanuni Leoben

Download or read book British Reports Translations and Theses written by British Library. Document Supply Centre and published by . This book was released on 1996 with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issue for Mar. 1981 contains index for Jan.-Mar. 1981 in microfiche form.

Download or read book Automotive Plastics and Composites written by D. Mann and published by Elsevier. This book was released on 1999-12-08 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following the success of the first (1995) edition, this fully updated report will provide a global overview of the use of automotive plastics and composites in passenger vehicles, with an analysis of markets and trends to the year 2007. Special attention is given to vehicle weight reduction. For a PDF version of the report please call Tina Enright on +44 (0) 1865 843008 for price details.

Download or read book Plastics Application Technology for Lightweight Automobiles written by Sudhakar Marur and published by SAE International. This book was released on 2013-08-06 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is focused on the use of plastics in automobiles for traditional applications, as well as for more advanced uses such as under-the-hood components. Engineering thermoplastics offer the ability to tailor-make components from polymers, and to design parts for enhanced performance, new functionality, part integration, and elimination of secondary operations. Parts made from engineering thermoplastics can be manufactured within specified cost constraints, and using manufacturing methods that offer a wide range of production flexibility. A decade of research and real-world applications is presented by the authors on application technology development for various aspects of automotive design – concept design, CAD modeling, predictive engineering methods through CAE, manufacturing method simulation, and prototype and tool making. Additional advantages of plastics are covered and include greater styling, improved energy absorption, and enhanced performance over traditional materials, all while fostering environmental sustainability and reducing overall vehicle weight for next generation automobiles.

Download or read book Life Cycle Engineering of Plastics written by L. Lundquist and published by Elsevier. This book was released on 2001-01-23 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book adds much to the already evolving field of Design for Environment; but it goes far beyond most works on this subject by surrounding the central notions of life cycle assessment with a scientific body of knowledge and with a more practical slant reflecting the reality of the organizations in which product development occurs. Through a focus on plastic products, the authors show the importance of making ties between basic technical knowledge and the process of life cycle engineering. Their approach offers a practical, deliberate way to make ecologically and economically sensible decisions about product reuse and recycling and other critical dimensions of product life behavior. They demonstrate a positive approach to designing products that fits into a sustainable economy through down-to-earth cases. While the book focuses on the life cycle engineering of plastics, it is only a short step to other materials and products. Beyond contributing to the technology of life cycle engineering, this text adds to the growing body of knowledge that argues for an fundamentally new way of thinking about economic and social activity--a new paradigm for sustainable social and industrial problem solving. Industrial ecology is such a new system for thinking about and implementing sustainability that draws its core set of ideas from the ecological world. Industrial ecology brings to the surface the idea of interdependence among members of a community-- natural or economic, and notes the material cycles that are central to a stable ecosystem. The life cycle engineering framework, coupled with sound scientific knowledge of materials behavior as articulated in this book, makes a giant step towards bringing the model of industrial ecology into everyday practice." From the Preface by John R. Ehrenfeld Director, MIT Technology, Business and Environment Program Center for Technology, Policy, and Industrial Development

Download or read book Environmental Issues in Automotive Industry written by Paulina Golinska and published by Springer Science & Business Media. This book was released on 2013-09-03 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry is one of the most environmental aware manufacturing sectors. Product take-back regulations influence design of the vehicles, production technologies but also the configuration of automotive reverse supply chains. The business practice comes every year closer to the closed loop supply chain concept which completely reuses, remanufactures and recycles all materials. The book covers the emerging environmental issues in automotive industry through the whole product life cycle. Its focus is placed on a multidisciplinary approach. It presents viewpoints of academic and industry personnel on the challenges for implementation of sustainable police in the automotive sector

Download or read book Handbook of Industry Studies and Economic Geography written by Frank Giarratani and published by Edward Elgar Publishing. This book was released on 2013-12-27 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique Handbook examines the impacts on, and responses to, economic geography explicitly from the perspective of the behaviour, mechanics, systems and experiences of different firms in various types of industries. The industry studies approach all

Download or read book Handbook of Polypropylene and Polypropylene Composites Revised and Expanded written by Harutun Karian and published by CRC Press. This book was released on 2003-03-25 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on the success of its predecessor with completely revised material and six new chapters, the Handbook of Polypropylene and Polypropylene Composites, Second Edition responds to increasing interest and changing global trends in the manufacture and application of polypropylene resin. The authors highlight viable options for the manufacture of

Download or read book Plastic Waste and Recycling written by Trevor Letcher and published by Academic Press. This book was released on 2020-03-10 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic Waste and Recycling: Environmental Impact, Societal Issues, Prevention, and Solutions begins with an introduction to the different types of plastic materials, their uses, and the concepts of reduce, reuse and recycle before examining plastic types, chemistry and degradation patterns that are organized by non-degradable plastic, degradable and biodegradable plastics, biopolymers and bioplastics. Other sections cover current challenges relating to plastic waste, explain the sources of waste and their routes into the environment, and provide systematic coverage of plastic waste treatment methods, including mechanical processing, monomerization, blast furnace feedstocks, gasification, thermal recycling, and conversion to fuel. This is an essential guide for anyone involved in plastic waste or recycling, including researchers and advanced students across plastics engineering, polymer science, polymer chemistry, environmental science, and sustainable materials. - Presents actionable solutions for reducing plastic waste, with a focus on the concepts of collection, re-use, recycling and replacement - Considers major societal and environmental issues, providing the reader with a broader understanding and supporting effective implementation - Includes detailed case studies from across the globe, offering unique insights into different solutions and approaches

Download or read book Life Cycle Assessment and Environmental Impact of Polymeric Products written by T. J. O'Neill and published by iSmithers Rapra Publishing. This book was released on 2003 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This review describes the process of life cycle analysis in some detail. It describes the different organisations involved in researching and applying these techniques and the database resources being used to generate comparative reports. The overview explains the factors to be considered, the terminology, the organisations involved in developing these techniques and the legislation which is driving the whole process forward. The ISO standards relating to environmental management are also discussed briefly in the document. Design for the environment is covered in the report. This review is accompanied by summaries of selected papers on life cycle analysis and environmental impact from the Rapra Polymer Library database.

Download or read book The Circular Economy Handbook written by Peter Lacy and published by Springer Nature. This book was released on 2019-12-31 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Can we align global production and consumption systems with sustainability? Can business growth actually lead to a healthier planet? Can companies innovate through the circular economy to create competitive advantage and genuine impact? Waste to Wealth proved that the emerging circular economy advantage exists – now Lacy, Long and Spindler show you how to realize it at speed and scale in The Circular Economy Handbook. We stand at a crossroads, with rising geopolitical and geo-economic tensions, massive technological change and a host of social and environmental challenges. We are pushing planetary boundaries to their limits, with climate change and threats to biodiversity and oceans as just a few examples. Significant impacts are already being felt, and both people and planet face potentially catastrophic and irreversible consequences if we don’t urgently change our global model and systems. Our current linear “take, make, waste” models of production and consumption will not be sustainable in a world of some 9 billion people by 2050, especially with ever-expanding rates of consumption. Thriving within these dynamics demands more than incremental adjustments to business-as-usual. The circular economy offers a powerful means to decouple growth from use of scarce and harmful resources, enabling greater production and consumption with fewer negative environmental impacts—at the same time, making companies more innovative and competitive. In fact, this book shows that $4.5 trillion in economic value is at stake. Delivering on the promise of a circular economy demands impact and scale, extending through value chains and, ultimately, disrupting the entire economic system. In The Circular Economy Handbook, the authors illuminate the path from insight to action, from linear to circular. With case studies, advice and practical guidance, they show leaders how to pivot towards a holistic circular organization, embedding circularity internally and delivering broad-based system change. With unique insights across business models, technologies, and industries – featuring stories and real-world examples from circular pioneers – this book is the essential guide to help companies become leaders in the movement to secure the circular economy advantage.

Download or read book Understanding Environmental Pollution written by Marquita K. Hill and published by Cambridge University Press. This book was released on 1997-10-13 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction to local and global pollution issues, for undergraduate students.

Download or read book Index to Theses with Abstracts Accepted for Higher Degrees by the Universities of Great Britain and Ireland and the Council for National Academic Awards written by and published by . This book was released on 1996 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theses on any subject submitted by the academic libraries in the UK and Ireland.

Download or read book Plastics Reborn in 21st Century Vehicles written by and published by iSmithers Rapra Publishing. This book was released on 1999 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Automotive Supplier 99 written by Rapra Technology and published by iSmithers Rapra Publishing. This book was released on 1999 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Composites for Automotive Applications written by C. D. Rudd and published by iSmithers Rapra Publishing. This book was released on 2000 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various factors in the automotive sector have combined to create a favourable climate for the development of materials and fabrication techniques for polymer-based composite body panels and structures. The cond104 in which composites are used within the automotive industry has been reviewed in this report and those materials and processes that are used in the fabrication of components and structures are described in detail. For this reason, this report is essential reading for the composites, plastics industries and the land transport/automotive sectors. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database gives useful references for further reading.

Download or read book Handbook of Recycling written by Ernst Worrell and published by Newnes. This book was released on 2014-04-28 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: Winner of the International Solid Waste Association's 2014 Publication Award, Handbook of Recycling is an authoritative review of the current state-of-the-art of recycling, reuse and reclamation processes commonly implemented today and how they interact with one another. The book addresses several material flows, including iron, steel, aluminum and other metals, pulp and paper, plastics, glass, construction materials, industrial by-products, and more. It also details various recycling technologies as well as recovery and collection techniques. To completely round out the picture of recycling, the book considers policy and economic implications, including the impact of recycling on energy use, sustainable development, and the environment. With contemporary recycling literature scattered across disparate, unconnected articles, this book is a crucial aid to students and researchers in a range of disciplines, from materials and environmental science to public policy studies. - Portrays recent and emerging technologies in metal recycling, by-product utilization and management of post-consumer waste - Uses life cycle analysis to show how to reclaim valuable resources from mineral and metallurgical wastes - Uses examples from current professional and industrial practice, with policy and economic implications