Download or read book The Effects of Grain Boundary Segregation on Liquid Metal Embrittlement of Steel written by Subimal Dinda and published by . This book was released on 1973 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Grain Boundary Segregation in Metals written by Pavel Lejcek and published by Springer Science & Business Media. This book was released on 2010-07-20 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grain boundaries are important structural components of polycrystalline materials used in the vast majority of technical applications. Because grain boundaries form a continuous network throughout such materials, their properties may limit their practical use. One of the serious phenomena which evoke these limitations is the grain boundary segregation of impurities. It results in the loss of grain boundary cohesion and consequently, in brittle fracture of the materials. The current book deals with fundamentals of grain boundary segregation in metallic materials and its relationship to the grain boundary structure, classification and other materials properties.

Download or read book Grain Boundary Segregation and Liquid Metal Embrittlement of Copper Base Alloys by Mercury written by Upender Nath Nanda and published by . This book was released on 1973 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Liquid Metal Induced Grain Boundary Embrittlement written by Venkata Sai Pavan Kumar Bhogireddy and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metallurgical Technologies Energy Conversion and Magnetohydrodynamic Flows written by Herman Branover and published by AIAA. This book was released on 1993 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Influence of Grain Boundary Chemical Composition on Liquid Metal and Hydrogen Embrittlement written by Arnold W. Funkenbusch and published by . This book was released on 1979 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Embrittlement by Liquid and Solid Metals written by M. H. Kamdar and published by . This book was released on 1984 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Embrittlement of Engineering Alloys written by C. L. Briant and published by Elsevier. This book was released on 2013-10-22 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: Treatise on Materials Science and Technology, Volume 25: Embrittlement of Engineering Alloys is an 11-chapter text that describes some situations that produce premature failure of several engineering alloys, including steels and nickel- and aluminum-base alloys. Chapters 1 to 3 consider situations where improper alloy composition, processing, and/or heat treatment can lead to a degradation of mechanical properties, even in the absence of an aggressive environment or an elevated temperature. Chapters 4 and 5 examine the effect of elevated temperatures on the mechanical properties of both ferrous and nonferrous alloys. Chapters 6 and 7 discuss the effects of corrosive environments on both stressed and unstressed materials. In these environments anodic dissolution is the primary step that leads to failure. Chapters 8 to 10 deal with the effects of aggressive environments that lead to enhanced decohesion or embrittlement of the metal, such as hydrogen, liquid metal, and irradiation-induced embrittlement. Chapter 11 looks into the embrittlement phenomena occurring during welding, one of the most common processing conditions to which a material could be subjected. This book will prove useful to materials scientists and researchers.

Download or read book Considerations of Crystallography in Grain Boundary Fracture Induced by Liquid Metal Embrittlement written by Karl Heinz Buchner and published by . This book was released on 1971 with total page 45 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1993 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Grain Boundary Segregation of Impurities in Metals and Intergranular Brittle Fracture written by John R Low (Jr) and published by . This book was released on 1969 with total page 37 pages. Available in PDF, EPUB and Kindle. Book excerpt: The report discusses two investigations of temper embrittlement in low alloy quenched and tempered steel. Part I deals with additive effects of phosphorus and antimony as embrittling impurities in this type of grain-boundary embrittlement. Part II describes efforts to develop a method of determining the degree of segregation of alloys and impurities to grain-boundaries during temper embrittlement. The method under study involves neutron activation analysis of the etchant from etched intergranular fracture surfaces. (Author).

Download or read book Study of Grain Boundary Segregation Using the Auger Electron Emission Technique Annual Technical Progress Report VIII January 1 December 31 1978 written by and published by . This book was released on 1978 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The susceptibility of nickel-copper alloys to liquid metal embrittlement was studied by Auger spectroscopy. Alloys corresponding to Monel 400 with various levels of additional phosphorous were employed and were given various thermal treatments to control the extent of segregation. Segregation of phosphorous to the boundaries, with accompanying decreases in copper and nickel concentrations, greatly reduces susceptibility to intergranular embrittlement by mercury.

Download or read book Dissertation Abstracts International written by and published by . This book was released on 1974 with total page 1152 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy Research Abstracts written by and published by . This book was released on 1992 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the International Symposium On Advanced Structural Materials written by D.S. Wilkinson and published by Elsevier. This book was released on 2013-10-22 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: This International Symposium is sponsored by the Materials Engineering Section and the Basic Sciences Section of the Metallurgical Society of CIM and co-sponsored by the Canadian Ceramic Society. Topics covered include metal matrix composites, structural ceramics, polymeric composite materials, powder metallurgical materials and interfaces.

Download or read book Machinability of Powder Metallurgy Steels written by Andrej Šalak and published by Cambridge Int Science Publishing. This book was released on 2005 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: The machinability of powder metallurgy steels is poorer compared with wrought steels of appropriate composition and/or mechanical [properties. The reason for it is a larger number of material and processing variables affecting the final properties of a sintered material. Therefore the machining of powder metallurgy (PM) steels is a permanent subject of investigation and practice. The aim of the book is to make on the basis of present knowledge an overview of all interacting factors in machining process including those applied for the improvement of the machinability. There are the properties of basic plain iron and alloyed powders, various additions, compaction and sintering conditions. Effect of porosity, individual alloying elements and microstructure character is considered. The description of the basic machining processes with their characteristics and with the characteristics of the tool geometry belongs to the mentioned factors. For the improvement of machinability of PM steels different machining aids, as S, MnS, MoS2 and other are frequently used and their chemical and physical characteristics are given. The effect of various machining aids used on machinability of sintered plain iron, iron-carbon and of steels alloyed with Cu, Ni, Mo, Cr, Mn including powder forged steels with very different mechanical properties and very different microstructures is analysed and summarized. The high-speed steel, hardmetal and other tools with their geometry as the part of the cutting process are described in relation to the sintered powder materials. The recommendations for machining of various steels enclose the present knowledge about the machinability of powder metallurgy steels.

Download or read book Mechanical Properties and Working of Metals and Alloys written by Amit Bhaduri and published by Springer. This book was released on 2018-05-12 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to serve as core text or handy reference on two key areas of metallic materials: (i) mechanical behavior and properties evaluated by mechanical testing; and (ii) different types of metal working or forming operations to produce useful shapes. The book consists of 16 chapters which are divided into two parts. The first part contains nine chapters which describe tension (including elastic stress – strain relation, relevant theory of plasticity, and strengthening methods), compression, hardness, bending, torsion – pure shear, impact loading, creep and stress rupture, fatigue, and fracture. The second part is composed of seven chapters and covers fundamentals of mechanical working, forging, rolling, extrusion, drawing of flat strip, round bar, and tube, deep drawing, and high-energy rate forming. The book comprises an exhaustive description of mechanical properties evaluated by testing of metals and metal working in sufficient depth and with reasonably wide coverage. The book is written in an easy-to-understand manner and includes many solved problems. More than 150 numerical problems and many multiple choice questions as exercise along with their answers have also been provided. The mathematical analyses are well elaborated without skipping any intermediate steps. Slab method of analysis or free-body equilibrium approach is used for the analytical treatment of mechanical working processes. For hot working processes, different frictional conditions (sliding, sticking and mixed sticking–sliding) have been considered to estimate the deformation loads. In addition to the slab method of analysis, this book also contains slip-line field theory, its application to the static system, and the steady state motion, Further, this book includes upper-bound theorem, and upper-bound solutions for indentation, compression, extrusion and strip drawing. The book can be used to teach graduate and undergraduate courses offered to students of mechanical, aerospace, production, manufacturing and metallurgical engineering disciplines. The book can also be used for metallurgists and practicing engineers in industry and development courses in the metallurgy and metallic manufacturing industries.