Download or read book The Effects of Cracking and Fatigue on Reinforced Concrete Bridge Deck Durability written by James Anderson Young and published by . This book was released on 1970 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue Strength and Stiffness of Reinforced Concrete Bridge Decks written by P. C. Perdikaris and published by . This book was released on 1993 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Long Term Durability of Structural Materials written by P.J.M. Monteiro and published by Elsevier. This book was released on 2001-08-29 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Long Term Durability of Structural Materials" features proceedings of the workshop held at Berkeley, CA in October, 2000. It brought together engineers and scientists, who have received grants from the initiative NSF 98-42, to share their results on the study of long-term durability of materials and structures. The major objective was to develop new methods for accelerated short-term laboratory or in-situ tests which allow accurate, reliable, predictions of the long-term performance of materials, machines and structures. To achieve this goal it was important to understand the fundamental nature of the deterioration and damage processes in materials and to develop innovative ways to model the behavior of these processes as they affect the life and long-term performance of components, machines and structures. The researchers discussed their approach to include size effects in scaling up from laboratory specimens to actual structures. Accelerated testing and durability modeling techniques developed were validated by comparing their results with performance under actual operating conditions. The main mechanism of the deterioration discussed included environmental effects and/or exposure to loads, speeds and other operating conditions that are not fully anticipated in the original design. A broad range of deterioration damage, such as fatigue, overload, ultraviolet damage, corrosion, and wear was presented. A broad range of materials of interest was also discussed, including the full spectrum of construction materials, metals, ceramics, polymers, composites, and coatings. Emphasis was placed on scale-dependence and history of fabrication on resulting mechanical behavior of materials.
Download or read book Bridge Maintenance Safety Management Life Cycle Sustainability and Innovations written by Hiroshi Yokota and published by CRC Press. This book was released on 2021-04-20 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridge Maintenance, Safety, Management, Life-Cycle Sustainability and Innovations contains lectures and papers presented at the Tenth International Conference on Bridge Maintenance, Safety and Management (IABMAS 2020), held in Sapporo, Hokkaido, Japan, April 11–15, 2021. This volume consists of a book of extended abstracts and a USB card containing the full papers of 571 contributions presented at IABMAS 2020, including the T.Y. Lin Lecture, 9 Keynote Lectures, and 561 technical papers from 40 countries. The contributions presented at IABMAS 2020 deal with the state of the art as well as emerging concepts and innovative applications related to the main aspects of maintenance, safety, management, life-cycle sustainability and technological innovations of bridges. Major topics include: advanced bridge design, construction and maintenance approaches, safety, reliability and risk evaluation, life-cycle management, life-cycle sustainability, standardization, analytical models, bridge management systems, service life prediction, maintenance and management strategies, structural health monitoring, non-destructive testing and field testing, safety, resilience, robustness and redundancy, durability enhancement, repair and rehabilitation, fatigue and corrosion, extreme loads, and application of information and computer technology and artificial intelligence for bridges, among others. This volume provides both an up-to-date overview of the field of bridge engineering and significant contributions to the process of making more rational decisions on maintenance, safety, management, life-cycle sustainability and technological innovations of bridges for the purpose of enhancing the welfare of society. The Editors hope that these Proceedings will serve as a valuable reference to all concerned with bridge structure and infrastructure systems, including engineers, researchers, academics and students from all areas of bridge engineering.
Download or read book Bridge Safety Maintenance Management Life Cycle Resilience and Sustainability written by Joan Ramon Casas and published by CRC Press. This book was released on 2022-06-27 with total page 2646 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridge Safety, Maintenance, Management, Life-Cycle, Resilience and Sustainability contains lectures and papers presented at the Eleventh International Conference on Bridge Maintenance, Safety and Management (IABMAS 2022, Barcelona, Spain, 11–15 July, 2022). This e-book contains the full papers of 322 contributions presented at IABMAS 2022, including the T.Y. Lin Lecture, 4 Keynote Lectures, and 317 technical papers from 36 countries all around the world. The contributions deal with the state-of-the-art as well as emerging concepts and innovative applications related to the main aspects of safety, maintenance, management, life-cycle, resilience, sustainability and technological innovations of bridges. Major topics include: advanced bridge design, construction and maintenance approaches, safety, reliability and risk evaluation, life-cycle management, life-cycle, resilience, sustainability, standardization, analytical models, bridge management systems, service life prediction, structural health monitoring, non-destructive testing and field testing, robustness and redundancy, durability enhancement, repair and rehabilitation, fatigue and corrosion, extreme loads, needs of bridge owners, whole life costing and investment for the future, financial planning and application of information and computer technology, big data analysis and artificial intelligence for bridges, among others. This volume provides both an up-to-date overview of the field of bridge engineering and significant contributions to the process of making more rational decisions on bridge safety, maintenance, management, life-cycle, resilience and sustainability of bridges for the purpose of enhancing the welfare of society. The volume serves as a valuable reference to all concerned with and/or involved in bridge structure and infrastructure systems, including students, researchers and practitioners from all areas of bridge engineering.
Download or read book Fatigue of Steel Bridge Decks written by Timothy Russell Gurney and published by Bernan Press(PA). This book was released on 1992 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: A broadly-based research programme on orthotropic steel bridge decks, led by D.E. Nunn, was carried out between 1963 and 1987 covering traffic usage, surfacing and fatigue. Initially the work was predictive, determining the main variables and establishing the basis of a fatigue assessment methods. Following the discovery of fatigue cracks in service, methods of repair and strengthening were developed. This work has been recorded in internal reports, but much of it has not been generally available until publication of this review. Experimental results are presented and recommendations given for the fatigue classification of welded joints in orthotropic decks.
Download or read book Fatigue and Fracture of Non metallic Materials and Structures written by Andrea Spagnoli and published by MDPI. This book was released on 2020-06-23 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mechanics of fracture and fatigue have produced a huge body of research work in relation to applications to metal materials and structures. However, a variety of non-metallic materials (e.g., concrete and cementitious composites, rocks, glass, ceramics, bituminous mixtures, composites, polymers, rubber and soft matter, bones and biological materials, and advanced and multifunctional materials) have received relatively less attention, despite their attractiveness for a large spectrum of applications related to the components and structures of diverse engineering branches, applied sciences and architecture, and to the load-carrying systems of biological organisms. This book covers the broad topic of structural integrity of non-metallic materials, considering the modelling, assessment, and reliability of structural elements of any scale. Original contributions from engineers, mechanical materials scientists, computer scientists, physicists, chemists, and mathematicians are presented, applying both experimental and theoretical approaches.
Download or read book Impact of Deck Cracking on Durability written by Fouad Fanous and published by . This book was released on 2000 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete bridge decks subjected to corrosive environment because of the application of de-icing chemical could deteriorate at a rapid rate. In an effort to minimize corrosion of the reinforcement and the corresponding delaminations and spalls, the Iowa Department of Transportation started using epoxy-coated rebars (ECR) in the top mat of reinforcing around 1976 and in both mats 10 years later. The overall objective of this research was to determine the impact of deck cracking on durability and estimate the remaining functional service life of a bridge deck. This was accomplished by conducting a literature review, visually inspecting several bridge decks, collecting and sampling test cores from cracked and uncracked areas of bridge decks, determining the extent to which epoxy-coated rebars deteriorate at the site of cracks, and evaluating the impact of cracking on service life.
Download or read book Design of Reinforced Concrete Bridge Decks Under Moving Loads written by PC. Perdikaris and published by . This book was released on 1998 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper presents design recommendations of non-composite reinforced concrete bridge decks subjected to fatigue due to moving loads. These recommendations are based on test results of 1/3- and 1/6.6- scale physical models of a full-scale 21.6-cm (8.5 in.) thick and 15.24-m (50-ft) long simply supported non-composite reinforced concrete deck. Concrete bridge decks should be designed to transfer the load in a two-way action. Experimental results show that the two-way slab action in the decks changes to a one-way action (transverse direction) as fatigue damage due to a moving wheel-load accumulates. It is recommended to adopt an isotropic steel reinforcing pattern. An isotropic reinforcing pattern with a steel ratio of 0.3 % (each top and bottom layer) in each direction appears to be adequate. A similar reinforcing amount and pattern is required by the Ontario bridge design Code. The required steel content is therefore reduced resulting in substantial savings in the bridge deck construction costs and improving the corrosion resistance in decks, especially in the presence of deicing chemicals. It appears that flexural cracking in the deck and bond failure at the steel-concrete interface are necessary and sufficient conditions for deck failure under traffic loads. It is, thus, highly desirable to preclude or at least limit cracking and maximize the bond strength of the steel rebars.
Download or read book Effects of Product Quality and Design Criteria on Structural Integrity written by Richard C. Rice and published by ASTM International. This book was released on 1998 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains papers from a May 1997 symposium held in St. Louis, addressing different aspects of product quality as it relates to structural integrity, and the influence of design criteria on structural integrity. Topics include low-cycle fatigue testing of tubular material using non-standard specimens,
Download or read book Durability of Concrete Bridge Decks written by and published by . This book was released on 1965 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Civil Engineering and Disaster Prevention written by Abhijit Mohanrao Zende and published by CRC Press. This book was released on 2023-10-09 with total page 993 pages. Available in PDF, EPUB and Kindle. Book excerpt: Civil Engineering and Disaster Prevention focuses on the research of civil engineering, architecture and disaster prevention and control. These proceedings gather the most cutting-edge research and achievements, aiming to provide scholars and engineers with valuable research direction and engineering solutions. Subjects covered in the proceedings include: Civil Engineering Engineering Structure Architectural Materials Disaster Prevention and Control Building Electrical Engineering The works of these proceedings aim to promote the development of civil engineering and environment engineering. Thereby, fostering scientific information interchange between scholars from the top universities, research centers and high-tech enterprises working all around the world.
Download or read book Effect of Truck Weight on Bridge Network Costs written by Gongkang Fu and published by Transportation Research Board. This book was released on 2003 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Methods for the Control of Restrained Shrinkage Cracking written by Robert J. Frosch and published by . This book was released on 2006-09-15 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Crack Analysis in Structural Concrete written by Zihai Shi and published by Butterworth-Heinemann. This book was released on 2009-06-17 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book on the fracture mechanics of concrete focuses on the latest developments in computational theories, and how to apply those theories to solve real engineering problems. Zihai Shi uses his extensive research experience to present detailed examination of multiple-crack analysis and mixed-mode fracture.Compared with other mature engineering disciplines, fracture mechanics of concrete is still a developing field with extensive new research and development. In recent years many different models and applications have been proposed for crack analysis; the author assesses these in turn, identifying their limitations and offering a detailed treatment of those which have been proved to be robust by comprehensive use. After introducing stress singularity in numerical modelling and some basic modelling techniques, the Extended Fictitious Crack Model (EFCM) for multiple-crack analysis is explained with numerical application examples. This theoretical model is then applied to study two important issues in fracture mechanics - crack interaction and localization, and fracture modes and maximum loads. The EFCM is then reformulated to include the shear transfer mechanism on crack surfaces and the method is used to study experimental problems. With a carefully balanced mixture of theory, experiment and application, Crack Analysis in Structural Concrete is an important contribution to this fast-developing field of structural analysis in concrete. Latest theoretical models analysed and tested Detailed assessment of multiple crack analysis and multi-mode fractures Applications designed for solving real-life engineering problems
Download or read book Innovative Bridge Structures Based on Ultra High Performance Concrete UHPC written by Xudong Shao and published by Elsevier. This book was released on 2024-01-18 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovative Bridge Structures Based on Ultra-High Performance Concrete (UHPC): Theory, Experiments and Applications introduces more than a dozen innovative bridge structures and engineering applications developed by the author's team based on UHPC. As the new bridge structure developed by UHPC can make outstanding contributions to the realization of the "carbon peaking and carbon neutrality goals" and "sustainable development," and since recent studies have shown that the application of UHPC is expected to greatly reduce the amount of materials and carbon emissions and prolong the life of the structure, this book is an ideal update on the topic. For example, after calculation, when UHPC is applied to the arch bridge with compression as the main stress characteristic, compared with the steel arch bridge, the dead weight of the UHPC arch bridge is basically the same, and the cost and carbon emission are only 34% and 20% of the latter. Ultra-high performance concrete (UHPC) as a new generation of civil structural materials has the characteristics of high strength, high toughness and high durability. Through the collaborative innovation of new materials and new structures, the application of UHPC in bridge engineering is expected to achieve the goal of economical, environmentally-friendly, durable and high performance of the main structure. Teachers readers about the new structures and technologies in bridge engineering developed by the author's team based on UHPC Provides relevant experimental studies and the mechanical properties of different UHPC structures Helps users understand the design method and calculation theory of UHPC bridge structures Covers the characteristics and advantages of new UHPC structures and technologies applied to engineering
Download or read book Innovation Communication and Engineering written by Teen-Hang Meen and published by CRC Press. This book was released on 2013-10-08 with total page 2334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume represents the proceedings of the 2013 International Conference on Innovation, Communication and Engineering (ICICE 2013). This conference was organized by the China University of Petroleum (Huadong/East China) and the Taiwanese Institute of Knowledge Innovation, and was held in Qingdao, Shandong, P.R. China, October 26 - November 1, 2013. The conference received 653 submitted papers from 10 countries, of which 214 papers were selected by the committees to be presented at ICICE 2013. The conference provided a unified communication platform for researchers in a wide range of fields from information technology, communication science, and applied mathematics, to computer science, advanced material science, design and engineering. This volume enables interdisciplinary collaboration between science and engineering technologists in academia and industry as well as networking internationally. Consists of a book of abstracts (260 pp.) and a USB flash card with full papers (912 pp.).
