Download or read book The Effect of the Liquid Viscosity in Two phase Two component Flow written by Melvin Jerome Fohrman and published by . This book was released on 1960 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: An evaluation was made of the effect of the liquid-phase viscosity on slip ratio using a forced-circulation two-phase two-component system operating at atmospheric pressure for air and glycerol-water mixtures. The effect of liquid-phase viscosity on pressure drop was observed, and the flow regimes were identified and studied. The approximate ranges of the variables investigated were: liquid viscosity, 0.75 to 500 cp; quality, 0.005 to 0.0184; liquid flow rate, 0.2 to 0.8 Ib/sec; air flow rate, 0.001 to 0.015 Ib/sec; and void-volume fraction, 0.34 to 0.78. The void-volume fraction and the approximate distribution of the two-phase mixture at a particular cross-sectional element of the test section were determined by -attenuation techniques. The slip-ratio and pressure-drop results were not found to indicate any considerable variations caused by changes in flow pattern or liquid flow rates for the range of flow conditions and liquid viscosities encountered.
Download or read book THE EFFECT OF THE LIQUID VISCOSITY IN TWO PHASE TWO COMPONENT FLOW written by and published by . This book was released on 1960 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: An evaluation was made of the effect of the liquid-phase viscosity on slip ratio using a forced-circulation two-phase two-component system operating at atmospheric pressure for air and glycerol-water mixtures. The effect of liquidphase viscosity on pressure drop was observed, and the flow regimes were identified and studied. The approximate ranges of the variables investigated were: liquid viscosity, 0.75 to 500 cp; quality, 0.005 to 0.0184; liquid flow rate, 0.2 to 0.8 Ib/sec; air flow rate. 0.001 to 0.015 Ib/sec; and void-volume fraction, 0.34 to 0.78. The vold-volume fraction and the approximate distributlon of the two-phase mlxture at a particular cross-sectional element of the test section were determlned by -attenuation techniques. The slip-ratio and pressure-drop results were not found to Indicate any considerable variations caused by changes in flow pattern or liquid flow rates for the range of flow conditions and liquid viscosities encountered. (B.O.G.).
Download or read book Modelling and Experimentation in Two Phase Flow written by Volfango Bertola and published by Springer. This book was released on 2014-05-04 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an up-to-date review of recent advances in the study of two-phase flows, with focus on gas-liquid flows, liquid-liquid flows, and particle transport in turbulent flows. The book is divided into several chapters, which after introducing basic concepts lead the reader through a more complex treatment of the subjects. The reader will find an extensive review of both the older and the more recent literature, with abundance of formulas, correlations, graphs and tables. A comprehensive (though non exhaustive) list of bibliographic references is provided at the end of each chapter. The volume is especially indicated for researchers who would like to carry out experimental, theoretical or computational work on two-phase flows, as well as for professionals who wish to learn more about this topic.
Download or read book Two Phase Flows written by Shih-i Pai and published by Springer-Verlag. This book was released on 2013-07-02 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Two Phase Flow written by Cl Kleinstreuer and published by Routledge. This book was released on 2017-11-01 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This graduate text provides a unified treatment of the fundamental principles of two-phase flow and shows how to apply the principles to a variety of homogeneous mixture as well as separated liquid-liquid, gas-solid, liquid-solid, and gas-liquid flow problems, which may be steady or transient, laminar or turbulent.Each chapter contains several sample problems, which illustrate the outlined theory and provide approaches to find simplified analytic descriptions of complex two-phase flow phenomena.This well-balanced introductory text will be suitable for advanced seniors and graduate students in mechanical, chemical, biomedical, nuclear, environmental and aerospace engineering, as well as in applied mathematics and the physical sciences. It will be a valuable reference for practicing engineers and scientists. A solutions manual is available to qualified instructors.
Download or read book Two Phase Flows in Chemical Engineering written by David Azbel and published by Cambridge University Press. This book was released on 1981-08-31 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: The behaviour of bubbles is a unifying theme of this book. From an explanation of the fundamentals of bubbles formation at a single orifice, Dr Azbel goes on to set up equations for bubble motion, bubble size, bubble-size distribution and pressure drop across a perforated plate.
Download or read book Behavior of Two phase Two component Fluid Flow in Tubes written by William Smith Pickrell and published by . This book was released on 1949 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book One dimensional Two phase Flow written by Graham B. Wallis and published by . This book was released on 1969 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Behavior of Two phase Two component Flow in Tubes written by Frank Dixon McElwee and published by . This book was released on 1947 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Two Phase Flow in Complex Systems written by Salomon Levy and published by John Wiley & Sons. This book was released on 1999-08-02 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mehrphasige Strömungen spielen in etlichen Industriezweigen, besonders der Luft- und Raumfahrt und der Energieerzeugung, eine zentrale Rolle. Derart komplexe Strömungsvorgänge sind extrem schwer vorauszuberechnen, zu analysieren und zu testen. Wertvolle Hilfestellungen, die für reale technische Situationen gedacht sind, gibt dieser Band, der auch Quelltexte einschlägiger Computerprogramme enthält. (07/99)
Download or read book An Overview of Heat Transfer Phenomena written by Salim Newaz Kazi and published by IntechOpen. This book was released on 2012-10-31 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the wake of energy crisis due to rapid growth of industries, urbanization, transportation, and human habit, the efficient transfer of heat could play a vital role in energy saving. Industries, household requirements, offices, transportation are all dependent on heat exchanging equipment. Considering these, the present book has incorporated different sections related to general aspects of heat transfer phenomena, convective heat transfer mode, boiling and condensation, heat transfer to two phase flow and heat transfer augmentation by different means.
Download or read book Flow in Porous Rocks written by Andrew W. Woods and published by Cambridge University Press. This book was released on 2015 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides simplified models explaining flows in heterogeneous rocks, their physics and energy production processes, for researchers, energy industry professionals and graduate students.
Download or read book Effect of Viscosity in Vertical Two phase Flow written by Adnan Gümüstas and published by . This book was released on 1968 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effects of Liquid Viscosity in Two phase Annular Flow written by Gregory W. Leman and published by . This book was released on 1983 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transport Phenomena in Multiphase Systems written by Amir Faghri and published by Academic Press. This book was released on 2006 with total page 1072 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering students in a wide variety of engineering disciplines from mechanical and chemical to biomedical and materials engineering must master the principles of transport phenomena as an essential tool in analyzing and designing any system or systems wherein momentum, heat and mass are transferred. This textbook was developed to address that need, with a clear presentation of the fundamentals, ample problem sets to reinforce that knowledge, and tangible examples of how this knowledge is put to use in engineering design. Professional engineers, too, will find this book invaluable as reference for everything from heat exchanger design to chemical processing system design and more. * Develops an understanding of the thermal and physical behavior of multiphase systems with phase change, including microscale and porosity, for practical applications in heat transfer, bioengineering, materials science, nuclear engineering, environmental engineering, process engineering, biotechnology and nanotechnology * Brings all three forms of phase change, i.e., liquid vapor, solid liquid and solid vapor, into one volume and describes them from one perspective in the context of fundamental treatment * Presents the generalized integral and differential transport phenomena equations for multi-component multiphase systems in local instance as well as averaging formulations. The molecular approach is also discussed with the connection between microscopic and molecular approaches * Presents basic principles of analyzing transport phenomena in multiphase systems with emphasis on melting, solidification, sublimation, vapor deposition, condensation, evaporation, boiling and two-phase flow heat transfer at the micro and macro levels * Solid/liquid/vapor interfacial phenomena, including the concepts of surface tension, wetting phenomena, disjoining pressure, contact angle, thin films and capillary phenomena, including interfacial balances for mass, species, momentum, and energy for multi-component and multiphase interfaces are discussed * Ample examples and end-of-chapter problems, with Solutions Manual and PowerPoint presentation available to the instructors
Download or read book Transport Phenomena in Porous Media III written by Derek B Ingham and published by Elsevier. This book was released on 2005-07-29 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid and flow problems in porous media have attracted the attention of industrialists, engineers and scientists from varying disciplines, such as chemical, environmental, and mechanical engineering, geothermal physics and food science. There has been a increasing interest in heat and fluid flows through porous media, making this book a timely and appropriate resource.Each chapter is systematically detailed to be easily grasped by a research worker with basic knowledge of fluid mechanics, heat transfer and computational and experimental methods. At the same time, the readers will be informed of the most recent research literature in the field, giving it dual usage as both a post-grad text book and professional reference.Written by the recent directors of the NATO Advanced Study Institute session on 'Emerging Technologies and Techniques in Porous Media' (June 2003), this book is a timely and essential reference for scientists and engineers within a variety of fields.
Download or read book Annular Two Phase Flow written by Geoffrey Hewitt and published by Elsevier. This book was released on 2013-10-22 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annular Two-Phase Flow presents the wide range of industrial applications of annular two-phase flow regimes. This book discusses the fluid dynamics and heat transfer aspects of the flow pattern. Organized into 12 chapters, this book begins with an overview of the classification of the various types of interface distribution observed in practice. This text then examines the various regimes of two-phase flow with emphasis on the regions of occurrence of the annular flow regime. Other chapters consider the single momentum and energy balances, which illustrate the differences and analogies between single- and two-phase flows. This book discusses as well the simple modes for annular flow with consideration to the calculation of the profile of shear stress in the liquid film. The final chapter deals with the techniques that are developed for the measurement of flow pattern, entrainment, and film thickness. This book is a valuable resource for chemical engineers.
