Download or read book Masters Theses in the Pure and Applied Sciences written by W. H. Shafer and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and dis seminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac tivity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volume were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 24 (thesis year 1979) a total of 10,033 theses titles from 26 Canadian and 215 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work. While Volume 24 reports these submitted in 1979, on occasion, certain universities do report theses submitted in previous years but not reported at the time.

Download or read book Influence of Roughness and Blowing on Compressible Turbulent Boundary Layer Flow written by Robert L. P. Voisinet and published by . This book was released on 1979 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1961 with total page 1096 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book NASA Tech Briefs written by and published by . This book was released on 1985 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Annual Research Briefs written by Center for Turbulence Research (U.S.) and published by . This book was released on 2007 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book NASA Technical Note written by and published by . This book was released on 1973 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Technical Abstract Bulletin written by and published by . This book was released on 1981 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Boundary Layer Theory written by Hermann Schlichting (Deceased) and published by Springer. This book was released on 2016-10-04 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of the near-legendary textbook by Schlichting and revised by Gersten presents a comprehensive overview of boundary-layer theory and its application to all areas of fluid mechanics, with particular emphasis on the flow past bodies (e.g. aircraft aerodynamics). The new edition features an updated reference list and over 100 additional changes throughout the book, reflecting the latest advances on the subject.

Download or read book Scramjet Propulsion written by Dora Musielak and published by John Wiley & Sons. This book was released on 2022-11-16 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scramjet Propulsion Explore the cutting edge of HAP technologies with this comprehensive resource from an international leader in her field Scramjet Propulsion: A Practical Introduction delivers a comprehensive treatment of hypersonic air breathing propulsion and its applications. The book covers the most up-to-date hypersonic technologies, like endothermic fuels, fuel injection and flameholding systems, high temperature materials, and TPS, and offers technological overviews of hypersonic flight platforms like the X-43A, X-51A, and HiFIRE. It is organized around easy-to-understand explanations of technical challenges and provides extensive references for the information contained within. The highly accomplished author provides readers with a fulsome description of the theoretical underpinnings of hypersonic technologies, as well as critical design and technology issues affecting hypersonic air breathing propulsion technologies. The book’s combination of introductory theory and advanced instruction about individual hypersonic engine components is ideal for students and practitioners in fields as diverse as hypersonic vehicle and propulsion development for missile defense technologies, launch aerospaceplanes, and civilian transports. Over 250 illustrations and tables round out the material. Readers will also learn from: A thorough introduction to hypersonic flight, hypersonic vehicle concepts, and a review of fundamental principles in hypersonic air breathing propulsion Explorations of the aerothermodynamics of scramjet engines and the design of scramjet components, as well as hypersonic air breathing propulsion combustors and fuels Analyses of dual-mode combustion phenomena, materials structures, and thermal management in hypersonic vehicles, and combined cycle propulsion An examination of CFD analysis, ground and flight testing, and simulation Perfect for researchers and graduate students in aerospace engineering, Scramjet Propulsion: A Practical Introduction is also an indispensable addition to the libraries of engineers working on hypersonic vehicle development seeking a state-of-the-art resource in one of the most potentially disruptive areas of aerospace research today.

Download or read book Gravel Bed Rivers written by Michael Church and published by John Wiley & Sons. This book was released on 2012-02-10 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gravel-Bed Rivers: Processes, Tools, Environments presents a definitive review of current knowledge of gravel-bed rivers, derived from the 7th International Gravel-bed Rivers Workshop, the 5-yearly meeting of the world’s leading authorities in the field. Each chapter in the book has been specifically commissioned to represent areas in which recent progress has been made in the field. The topics covered also represent a coherent progression through the principal areas of the subject (hydraulics; sediment transport; river morphology; tools and methods; applications of science). Definitive review of the current knowledge of gravel-bed rivers Coverage of both fundamental and applied topics Edited by leading academics with contributions from key researchers Thoroughly edited for quality and consistency to provide coherent and logical progression through the principal areas of the subject.

Download or read book Journal of Fluids Engineering written by and published by . This book was released on 1981 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Centrifugal Pumps written by Johann Friedrich Gülich and published by Springer Nature. This book was released on 2019-11-22 with total page 1299 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook summarizes the research results on hydraulic problems in centrifugal pump design and describes the state of the art in a comprehensive way. For this 4th edition, current research results of practical relevance were included. The selection and presentation of the material was oriented towards the needs of pump manufacturers, system planners and pump operators. Much space is devoted to understanding the physical relationships as essential knowledge for correct application. The latter is supported by more than 160 diagrams and tables for calculation and problem diagnosis . The book has been extensively updated. New additions: - A separate chapter on "Vibrations on vertical pumps". - Measurements of hydraulic exciter and impeller reaction forces - Alternating stresses and fatigue fractures of impellers - a critical study on the accuracy of numerical flow calculations of pumps - Design of inlet housings and double spirals for multistage pumps.

Download or read book The Structure of Turbulent Shear Flow written by A. A. R. Townsend and published by Cambridge University Press. This book was released on 1976 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Develops a physical theory from the mass of experimental results, with revisions to reflect advances of recent years.

Download or read book R D Abstracts written by Technology Reports Centre (Great Britain) and published by . This book was released on 1981 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings written by Jack E. Cermak and published by . This book was released on 1975 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hydrodynamic Instability and Transition to Turbulence written by Akiva M. Yaglom and published by Springer Science & Business Media. This book was released on 2012-12-18 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a complete revision of the part of Monin & Yaglom's famous two-volume work "Statistical Fluid Mechanics: Mechanics of Turbulence" that deals with the theory of laminar-flow instability and transition to turbulence. It includes the considerable advances in the subject that have been made in the last 15 years or so. It is intended as a textbook for advanced graduate courses and as a reference for research students and professional research workers. The first two Chapters are an introduction to the mathematics, and the experimental results, for the instability of laminar (or inviscid) flows to infinitesimal (in practice "small") disturbances. The third Chapter develops this linear theory in more detail and describes its application to particular problems. Chapters 4 and 5 deal with instability to finite-amplitude disturbances: much of the material has previously been available only in research papers.