Download or read book Modelling Diesel Combustion written by P. A. Lakshminarayanan and published by Springer Science & Business Media. This book was released on 2010-03-03 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phenomenology of Diesel Combustion and Modeling Diesel is the most efficient combustion engine today and it plays an important role in transport of goods and passengers on land and on high seas. The emissions must be controlled as stipulated by the society without sacrificing the legendary fuel economy of the diesel engines. These important drivers caused innovations in diesel engineering like re-entrant combustion chambers in the piston, lower swirl support and high pressure injection, in turn reducing the ignition delay and hence the nitric oxides. The limits on emissions are being continually reduced. The- fore, the required accuracy of the models to predict the emissions and efficiency of the engines is high. The phenomenological combustion models based on physical and chemical description of the processes in the engine are practical to describe diesel engine combustion and to carry out parametric studies. This is because the injection process, which can be relatively well predicted, has the dominant effect on mixture formation and subsequent course of combustion. The need for improving these models by incorporating new developments in engine designs is explained in Chapter 2. With “model based control programs” used in the Electronic Control Units of the engines, phenomenological models are assuming more importance now because the detailed CFD based models are too slow to be handled by the Electronic Control Units. Experimental work is necessary to develop the basic understanding of the pr- esses.
Download or read book Thermo and Fluid Dynamic Processes in Diesel Engines 2 written by James H. Whitelaw and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second book edited with a selection of papers from the two-yearly THIESEL Conference on Thermo- and Fluid Dynamic Processes in Diesel Engines, organised by CMT-Mvtores Termicos of the Universidad Po/itecnica de Valencia, Spain. This volume includes versions of papers selected from those presented at the THIESEL 2002 Conference th held on lOth to 13 September 2002. We hope it will be the second volume of a long series reflecting the quality of the THIESEL Conference. This year, the papers are grouped in six main thematic areas: State of the Art and Prospective, Injection Systems and Spray Formation, Combustion and Emissions, Engine Modelling, Alternative Combustion Concepts and Experimental Techniques. The actual conference covered a wider scope of topics, including Air Management and Fuels for Diesel Engines and a couple of papers included reflect this variety. However, the selection of papers published here represents the most current preoccupations of Diesel engine designers, namely how to improve the combustion process using new injection strategies and alternative concepts such as the Homogeneous Charge Combustion Ignition.
Download or read book Diesel Engine written by Saiful Bari and published by BoD – Books on Demand. This book was released on 2013-04-30 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diesel engines, also known as CI engines, possess a wide field of applications as energy converters because of their higher efficiency. However, diesel engines are a major source of NOX and particulate matter (PM) emissions. Because of its importance, five chapters in this book have been devoted to the formulation and control of these pollutants. The world is currently experiencing an oil crisis. Gaseous fuels like natural gas, pure hydrogen gas, biomass-based and coke-based syngas can be considered as alternative fuels for diesel engines. Their combustion and exhaust emissions characteristics are described in this book. Reliable early detection of malfunction and failure of any parts in diesel engines can save the engine from failing completely and save high repair cost. Tools are discussed in this book to detect common failure modes of diesel engine that can detect early signs of failure.
Download or read book Thermo and Fluid dynamic Processes in Diesel Engines written by James H.W. Whitelaw and published by Springer Science & Business Media. This book was released on 2002-01-11 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes versions of papers selected from those presented at the THIESEL 2000 Conference on Thermofluidynamic Processes in Diesel Engines, held at the Universidad Politecnica de Valencia, during the period of September th th 13 to 15 , 2000. The papers are grouped into seven thematic areas: State of the Art and Prospective, Fuels for Diesel Engines, Injection System and Spray Formation, Combustion and Pollutant Formation, Modelling, Experimental Techniques, and Air Management. These areas cover most of the technologies and research strategies that may allow Light Duty and Heavy Duty Diesel engines to comply with current and forthcoming emission standards, while maintaining or improving fuel consumption. The main objectives of the conference were to bring together ideas and experience from Industry and Universities to facilitate interchange of information and to promote discussion of future research and development needs. The technical papers emphasised the use diagnostic and simulation techniques and their relationship to engineering practice and the advancement of the Diesel engine. We hope that this approach, which proved to be successful at the Conference, is reflected in this volume. We thank all those who contributed to the success of the Conference, and particularly the members of the Advisory Committee who assessed abstracts and chaired many of the technical sessions. Weare also grateful to participants who presented their work or contributed to the many discussions. Finally, the Conference benefitted from financial support from the organisations listed below and we are glad to have this opportunity to record our gratitude.
Download or read book Diesel Combustion and Emissions written by Society of Automotive Engineers and published by . This book was released on 1981 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engine Modeling and Simulation written by Avinash Kumar Agarwal and published by Springer Nature. This book was released on 2021-12-16 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the simulation and modeling of internal combustion engines. The contents include various aspects of diesel and gasoline engine modeling and simulation such as spray, combustion, ignition, in-cylinder phenomena, emissions, exhaust heat recovery. It also explored engine models and analysis of cylinder bore piston stresses and temperature effects. This book includes recent literature and focuses on current modeling and simulation trends for internal combustion engines. Readers will gain knowledge about engine process simulation and modeling, helpful for the development of efficient and emission-free engines. A few chapters highlight the review of state-of-the-art models for spray, combustion, and emissions, focusing on the theory, models, and their applications from an engine point of view. This volume would be of interest to professionals, post-graduate students involved in alternative fuels, IC engines, engine modeling and simulation, and environmental research.
Download or read book Alternative Diesel Fuels written by Daniel J Holt and published by SAE International. This book was released on 2004-01-01 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: A key topic of many technical discussions has been the development of alternative fuels to power the compression ignition engine. Reasons for this include the desire to reduce the dependency on petroleum-based fuel and, at the same time, to reduce the particulate matter (PM) and NOx emissions. Also, there has been interest generated in the diesel engine because of the reduction in greenhouse gases that has been proposed during the 2008-2012 time frame in Europe and the regulations that affect diesel engines in the United States.
Download or read book Innovations in Fuel Economy and Sustainable Road Transport written by Institution of Mechanical Engineers and published by Elsevier. This book was released on 2011-10-19 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the papers from the Innovations in Fuel Economy and Sustainable Road Transport conference, held in Pune, India, 8-9 November, 2011. Papers examine advances in powertrain, alternative fuels, lightweight vehicles, electric vehicles and hybrid vehicles. An international assembly of senior industry representatives provide insight into research and technological advances in low carbon technology sustainability for road transport, helping towards achieving stringent emissions standards and continual improvements in fuel economy efficiency, all in an expanding Indian market. These technical papers from industry and academia discuss the developments and research of leading organisations. - Discusses maximising powertrain performance for a low carbon agenda - Provides readers with an understanding of the latest developments in alternative fuels - Examines the future landscape for the implementation and development of electric vehicles
Download or read book Bio Diesel written by Gadepalli Ravi Kiran Sastry and published by Readworthy. This book was released on with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a well known fact that the resources of mineral oils are depleting day-by-day, and the cost of exploration of the remaining reserves is bound to escalate. Moreover, the burning of fossil fuels increases the level of carbon-dioxide in the atmosphere causing the 'Green House' effect. In this context, a viable and sustainable alternative fuel is necessary to cater to a large fleet of automobiles across the world. The advent of bio-diesel has come to the rescue in such a warranting situation. Efforts are being made to streamline the systems to produce bio-diesels at economically viable rates and apply them in running the diesel engines in lieu of petro-diesel. And the present study is an attempt in this direction. It seeks to exploit non-edible oil plants, especially Jatropha, mahua and palm, to replace diesel oil usage in the conventional diesel engines. Providing transesterification procedure for all the three non-edible oils, it deals with the heat release rate calculations based on the pressure data collected in the combustion chamber. It also extends discussion on the instrumentation and experimentation, as well as the results of the findings.
Download or read book Combustion Phenomena written by Jozef Jarosinski and published by CRC Press. This book was released on 2009-02-12 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extensively using experimental and numerical illustrations, CombustionPhenomena: Selected Mechanisms of Flame Formation, Propagation, and Extinction provides a comprehensive survey of the fundamental processes of flame formation, propagation, and extinction. Taking you through the stages of combustion, leading experts visually display, mathematically explain, and clearly theorize on important physical topics of combustion. After a historical introduction to the field, they discuss combustion chemistry, flammability limits, and spark ignition. They also study counterflow twin-flame configuration, flame in a vortex core, the propagation characteristics of edge flames, instabilities, and tulip flames. In addition, the book describes flame extinction in narrow channels, global quenching of premixed flames by turbulence, counterflow premixed flame extinction limits, the interaction of flames with fluids in rotating vessels, and turbulent flames. The final chapter explores diffusion flames as well as combustion in spark- and compression-ignition engines. It also examines the transition from deflagration to detonation, along with the detonation wave structure. With downloadable resources of images that beautifully illustrate a range of combustion phenomena, this book facilitates a practical understanding of the processes occurring in the conception, spread, and extinguishment of a flame. It will help you on your way to finding solutions to real issues encountered in transportation, power generation, industrial processes, chemical engineering, and fire and explosion hazards.
Download or read book Alternative Transportation Fuels written by M.K. Gajendra Babu and published by CRC Press. This book was released on 2013-06-18 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: A continuous rise in the consumption of gasoline, diesel, and other petroleum-based fuels will eventually deplete reserves and deteriorate the environment, Alternative Transportation Fuels: Utilisation in Combustion Engines explores the feasibility of using alternative fuels that could pave the way for the sustained operation of the transport sector. It assesses the potential avenues for using different alternative fuels in the transport sector, highlights several types of transport and its effect on the environment, and discusses the conventional and alternative fuels for land transport. • Provides experimental investigations relating to the utilization of alternative fuels in the internal combustion engines • Describes the alternative powered vehicles and potential alternative fuels for rail, marine, and aviation applications • Highlights the potential global warming and climate change on account of utilizing the conventional and alternative fuels The book starts off with coverage of the fuels for the land transport, aviation sector and reports on the experimental investigations relating to the utilisation of alternative fuels in internal combustion engines. It delivers an in-depth analysis of engine combustion, then focuses on fuel quality characterization and a modeling of alternative-fuelled engines, and describes alternative-powered vehicles. Based on the authors’ experience at laboratories around the globe, Alternative Transportation Fuels: Utilisation in Combustion Engines presents potential alternative fuels for rail, marine, and aviation applications. It examines potential global warming and climate change that could occur from the use of conventional and alternative fuels. It provides technical guidance on the future set up of refineries and automotive industries.
Download or read book SAE Technical Paper Series written by and published by . This book was released on 1999 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Spring Technical Conference of the ASME Internal Combustion Engine Division written by American Society of Mechanical Engineers. Internal Combustion Engine Division. Spring Technical Conference and published by . This book was released on 2006 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fuel Systems for IC Engines written by Institution of Mechanical Engineers and published by Elsevier. This book was released on 2012-03-06 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the papers from the latest conference in this successful series on fuel injection systems for internal combustion engines. It is vital for the automotive industry to continue to meet the demands of the modern environmental agenda. In order to excel, manufacturers must research and develop fuel systems that guarantee the best engine performance, ensuring minimal emissions and maximum profit. The papers from this unique conference focus on the latest technology for state-of-the-art system design, characterisation, measurement, and modelling, addressing all technological aspects of diesel and gasoline fuel injection systems. Topics range from fundamental fuel spray theory, component design, to effects on engine performance, fuel economy and emissions. - Presents the papers from the IMechE conference on fuel injection systems for internal combustion engines - Papers focus on the latest technology for state-of-the-art system design, characterisation, measurement and modelling; addressing all technological aspects of diesel and gasoline fuel injection systems - Topics range from fundamental fuel spray theory and component design to effects on engine performance, fuel economy and emissions
Download or read book Encyclopedia of Automotive Engineering written by and published by John Wiley & Sons. This book was released on 2015-03-23 with total page 3888 pages. Available in PDF, EPUB and Kindle. Book excerpt: Erstmals eine umfassende und einheitliche Wissensbasis und Grundlage für weiterführende Studien und Forschung im Bereich der Automobiltechnik. Die Encyclopedia of Automotive Engineering ist die erste umfassende und einheitliche Wissensbasis dieses Fachgebiets und legt den Grundstein für weitere Studien und tiefgreifende Forschung. Weitreichende Querverweise und Suchfunktionen ermöglichen erstmals den zentralen Zugriff auf Detailinformationen zu bewährten Branchenstandards und -verfahren. Zusammenhängende Konzepte und Techniken aus Spezialbereichen lassen sich so einfacher verstehen. Neben traditionellen Themen des Fachgebiets beschäftigt sich diese Enzyklopädie auch mit "grünen" Technologien, dem Übergang von der Mechanik zur Elektronik und den Möglichkeiten zur Herstellung sicherer, effizienterer Fahrzeuge unter weltweit unterschiedlichen wirtschaftlichen Rahmenbedingungen. Das Referenzwerk behandelt neun Hauptbereiche: (1) Motoren: Grundlagen; (2) Motoren: Design; (3) Hybrid- und Elektroantriebe; (4) Getriebe- und Antriebssysteme; (5) Chassis-Systeme; (6) Elektrische und elektronische Systeme; (7) Karosserie-Design; (8) Materialien und Fertigung; (9) Telematik. - Zuverlässige Darstellung einer Vielzahl von Spezialthemen aus dem Bereich der Automobiltechnik. - Zugängliches Nachschlagewerk für Jungingenieure und Studenten, die die technologischen Grundlagen besser verstehen und ihre Kenntnisse erweitern möchten. - Wertvolle Verweise auf Detailinformationen und Forschungsergebnisse aus der technischen Literatur. - Entwickelt in Zusammenarbeit mit der FISITA, der Dachorganisation nationaler Automobil-Ingenieur-Verbände aus 37 Ländern und Vertretung von über 185.000 Ingenieuren aus der Branche. - Erhältlich als stets aktuelle Online-Ressource mit umfassenden Suchfunktionen oder als Print-Ausgabe in sechs Bänden mit über 4.000 Seiten. Ein wichtiges Nachschlagewerk für Bibliotheken und Informationszentren in der Industrie, bei Forschungs- und Schulungseinrichtungen, Fachgesellschaften, Regierungsbehörden und allen Ingenieurstudiengängen. Richtet sich an Fachingenieure und Techniker aus der Industrie, Studenten höherer Semester und Studienabsolventen, Forscher, Dozenten und Ausbilder, Branchenanalysen und Forscher.
Download or read book Alternative Fuels and Advanced Combustion Techniques as Sustainable Solutions for Internal Combustion Engines written by Akhilendra Pratap Singh and published by Springer Nature. This book was released on 2021-05-15 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph covers different aspects related to utilization of alternative fuels in internal combustion (IC) engines with a focus on biodiesel, dimethyl ether, alcohols, biogas, etc. The focal point of this book is to present engine combustion, performance and emission characteristics of IC engines fueled by these alternative fuels. A section of this book also covers the potential strategies of utilization of these alternative fuels in an energy efficient manner to reduce the harmful pollutants emitted from IC engines. It presents the comparative analysis of different alternative fuels in a variety of engines to show the appropriate alternative fuel for specific types of engines. This book will prove useful for both researchers as well as energy experts and policy makers.
Download or read book Proceedings of the International Conference on Emerging Technologies in Intelligent System and Control written by and published by Allied Publishers. This book was released on 2005 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributed articles presented in the seminar held during Jan. 5-7, 2005, at Kumaraguru College of Technology, Coimbatore.
