Download or read book Effects of Ground Granulated Blast Furnace Slag in Portland Cement Concrete written by Irene K. LaBarca and published by . This book was released on 2007 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: This research examined the properties of concrete containing grade 120 slag cement at replacement levels of 0%, 30%, and 50%. The primary concrete properties studied were compressive strength, split-tensile strength, and deicer scaling resistance. Material variations included four sources of ordinary portland cement and two types of coarse aggregate. Strength properties were studied at room temperature and 40°F mix and curing conditions. Deicer scaling resistance was studied for concrete cured under six curing conditions. Carbonation of concrete cured under these six conditions was also investigated.

Download or read book Properties of Fresh and Hardened Concrete Containing Supplementary Cementitious Materials written by Nele De Belie and published by Springer. This book was released on 2017-12-09 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume represents the current knowledge on the effect of SCMs (slag, fly ash, silica fume, limestone powder, metakaolin, natural pozzolans, rice husk ash, special SCMs, ternary blends) on the properties of fresh and hardened concrete (e.g. early strength development, workability, shrinkage) and curing requirements. Other topics treated in the book are postblending vs preblending, implications of SCM variability, interaction between SCM and commonly used admixtures (e.g. superplasticizers, air entrainers).

Download or read book Proceedings of the 7th International Conference on Civil Engineering written by Eric Strauss and published by Springer Nature. This book was released on 2023-10-01 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains research papers presented at the 7th International Conference on Civil Engineering, which was held in Singapore from 24-26 March 2023. Significant results contained in the book show the importance of technology in solving engineering issues throughout the world. Highlighted topics include climate change, disaster relief, resilience, pollution control and management techniques for construction, mitigation and adaptation. Many techniques are utilized in a variety of contexts to solve engineering and urban management problems in both developed and developing countries. This volume consists of refereed submissions authored by a wide variety of international researchers and practitioners from many perspectives discussing emerging issues in civil and environmental engineering. Practical solutions to worldwide issues in hazard mitigation, pollution control, transportation infrastructure and energy production are emphasized. The chapters provide an in-depth look at current issues in these areas of engineering that should benefit interested individuals at all levels of expertise.

Download or read book Critical Thinking in the Sustainable Rehabilitation and Risk Management of the Built Environment written by Ancuța Rotaru and published by Springer Nature. This book was released on 2020-10-29 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings book presents contributions to the International Conference on Critical Thinking in the Sustainable Rehabilitation and Risk Management of the Built Environment – CRIT-RE-BUILT – held in Iași, Romania, November 7–9, 2019. It mirrors outcomes in fundamental and applied research covering a broad palette of competences like observations, analysis, interpretation, evaluation, problem-solving and decision making. The book sets up eight chapters related to rehabilitation and risk in the built environment. Each chapter starts with a broad state-of-the-art presentation comprising the latest ideas and methods in the field assessing and asserting synthesized levels of research, development and novelty through a critical thinking process. The authors of the eight presentations are partners in the E+ Programme for Strategic Partnerships Rehabilitation of the Built Environment in the Context of Smart City and Sustainable Development Concepts for Knowledge Transfer and Lifelong Learning (RE-BUILT).

Download or read book Handbook of Sustainable Concrete and Industrial Waste Management written by Francesco Colangelo and published by Woodhead Publishing. This book was released on 2021-12-01 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Sustainable Concrete and Industrial Waste Management summarizes key research trends in recycling and reusing concrete and industrial waste to reduce their environmental impact. This volume also includes important contributions in collaboration with the CRI-TEST Innovation Lab, Naples – Acerra. Part one discusses eco-friendly innovative cement and concrete and reviews key substitute materials. Part two analyzes the use of industrial waste as aggregates and the mechanical properties of concrete containing waste materials. Part three discusses differences between innovative binders, focusing on alkali-activated and geopolymer concrete. Part four provides a thorough overview of the life cycle assessment (LCA) of concrete containing industrial wastes and the impacts related to the logistics of wastes, the production of the concrete, and the management of industrial wastes. By providing research examples, case studies, and practical strategies, this book is a state-of-the-art reference for researchers working in construction materials, civil or structural engineering, and engineers working in the industry. - Offers a systematic and comprehensive source of information on the latest developments in sustainable concrete; - Analyzes different types of sustainable concrete and innovative binders from chemical, physical, and mechanical points of view; - Includes real case studies showing application of the LCA methodology.

Download or read book Second RILEM International Conference on Concrete and Digital Fabrication written by Freek P. Bos and published by Springer Nature. This book was released on 2020-07-08 with total page 1209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers peer-reviewed contributions presented at the 2nd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete), held online and hosted by the Eindhoven University of Technology, the Netherlands from 6-9 July 2020. Focusing on additive and automated manufacturing technologies for the fabrication of cementitious construction materials, such as 3D concrete printing, powder bed printing, and shotcrete 3D printing, the papers highlight the latest findings in this fast-growing field, addressing topics like mixture design, admixtures, rheology and fresh-state behavior, alternative materials, microstructure, cold joints & interfaces, mechanical performance, reinforcement, structural engineering, durability and sustainability, automation and industrialization.

Download or read book Proceedings of SECON 21 written by Giuseppe Carlo Marano and published by Springer Nature. This book was released on 2021-09-03 with total page 1127 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers peer-reviewed contributions presented at the International Conference on Structural Engineering and Construction Management (SECON’21), held on 12-15 May 2021. The meeting served as a fertile platform for discussion, sharing sound knowledge and introducing novel ideas on issues related to sustainable construction and design for the future. The respective contributions address various aspects of numerical modeling and simulation in structural engineering, structural dynamics and earthquake engineering, advanced analysis and design of foundations, BIM, building energy management, and technical project management. Accordingly, the book offers a valuable, up-to-date tool and essential overview of the subject for scientists and practitioners alike, and will inspire further investigations and research.

Download or read book Advances in Molten Slags Fluxes and Salts written by Ramana Reddy and published by Springer. This book was released on 2017-01-10 with total page 1373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection focuses on ferrous and non-ferrous metallurgy where ionic melts, slags, fluxes, or salts play important roles in industrial growth and economy worldwide. Technical topics included are: thermodynamic properties and phase diagrams and kinetics of slags, fluxes, and salts; physical properties of slags, fluxes, and salts; structural studies of slags; interfacial and process phenomena involving foaming, bubble formation, and drainage; slag recycling, refractory erosion/corrosion, and freeze linings; and recycling and utilization of metallurgical slags and models and their applications in process improvement and optimization. These topics are of interest to not only traditional ferrous and non-ferrous metal industrial processes but also new and upcoming technologies.

Download or read book Supplementary Cementing Materials written by Rafat Siddique and published by Springer Science & Business Media. This book was released on 2011-03-28 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an attempt to consolidate the published research related to the use of Supplementary Cementing Materials in cement and concrete. It comprises of five chapters. Each chapter is devoted to a particular supplementing cementing material. It is based on the literature/research findings published in journals/conference proceeding, etc. Topics covered in the book are; coal fly ash, silica fume (SF), granulated blast furnace slag (GGBS), metakaolin (MK), and rice husk ash (RHA). Each chapter contains introduction, properties of the waste material/by-product, its potential usage, and its effect on the properties of fresh and hardened concrete and other cement based materials.

Download or read book Circular Economy in the Construction Industry written by Sadhan Kumar Ghosh and published by CRC Press. This book was released on 2021-12-22 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Circular Economy in the Construction Industry is an invaluable resource for researchers, policymakers, implementers and PhD and Masters-level students in universities analyzing the present status of Construction and Demolition Wastes (C&DW) management, materials development utilizing slag, fly ash, HDPE fibre, geo-wastes, and other wastes, green concrete, soil stabilization, resource circulation in construction sectors, success in experimentation & commercial production, future needs, and future research areas. While huge C&DW is wasted by dumping, there is potential of recycling preventing greenhouse gas (GHG) emissions and environmental pollution as well as creating business opportunities. Circularity of resources in the construction industry can contribute to a more secure, sustainable, and economically sound future through proper policy instruments, management systems, and recycling by selecting the following: Supply chain sustainability and collection of C&D Wastes, Appropriate separation and recycling technology, Enforcement of policy instruments, Productivity, quality control of recycled products and intended end use, Economic feasibility as business case, commercialization, generating employment. This book addresses most of the above issues in a lucid manner by experts in the field from different countries, which are helpful for the related stakeholders, edited by experts in the field.

Download or read book Self Compacting Concrete Materials Properties and Applications written by Rafat Siddique and published by Woodhead Publishing. This book was released on 2019-11-19 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Self-Compacting Concrete: Materials, Properties and Applications presents the latest research on various aspects of self-compacting concrete, including test methods, rheology, strength and durability properties, SCC properties at elevated temperature, SC manufacturing with the use of SCMs, recycled aggregates and industrial by-products. Written by an international group of contributors who are closely associated with the development of self-compacting concrete, the book explores the main differences between SCC and normal concrete in terms of raw materials, fresh properties and hardened properties. Other topics discussed include the structure and practical applications of fiber reinforced SCC. Researchers and experienced engineers will find this reference to be a systematic source to SCC with its accounting of the latest breakthroughs in the field and discussions of SCC constructability, structural integrity, improved flows into complex forms, and superior strength and durability. - Offers a systematic and comprehensive source of information on the latest developments in SCC technology - Includes mix design procedures, tests standards, rheology, strength and durability properties - Explores the properties and practical applications of SCC

Download or read book Concrete Construction Engineering Handbook written by Edward G. Nawy and published by CRC Press. This book was released on 2008-06-24 with total page 1586 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Concrete Construction Engineering Handbook, Second Edition provides in depth coverage of concrete construction engineering and technology. It features state-of-the-art discussions on what design engineers and constructors need to know about concrete, focusing on - The latest advances in engineered concrete materials Reinforced concrete construction Specialized construction techniques Design recommendations for high performance With the newly revised edition of this essential handbook, designers, constructors, educators, and field personnel will learn how to produce the best and most durably engineered constructed facilities.

Download or read book Advance Upcycling of By products in Binder and Binder Based Materials written by Mehmet Serkan Kirgiz and published by Elsevier. This book was released on 2023-09-23 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advance Upcycling of By-products in Binder and Binder-Based Materials focuses on research trends in binder and binder-based materials containing by-products. The book covers the properties of these materials, both physical and mechanical, and their durability, as well as their inner structure, both at the micro and nano-scale. The reuse of by-products within binder systems is also discussed as well as innovative approaches and advanced solutions for making cost-, ecology-, and environmental-friendly hydraulic binder and binder-based materials from the upcycling of by-products. The book also looks at additive manufacturing and explains the effects of by-products on the properties of binder and binder-based materials. As a consequence of the popularity of additive manufacturing, various by-product materials, in terms of constructional application, are also identified. These include latent hydraulic supplements, activators of transport properties, and increase in inner strength and durability. The book will be an essential reference resource for academic and industrial researchers, materials scientists and civil engineers and all those who are working in the development of 'greener' construction materials and utilization of waste and other fine by-products in the production of environmentally-friendly concrete. - Provides a detailed review of recent research on the upcycling of by-products for use in binder and binder-based materials - Presents innovative approaches and advanced solutions for making environmentally-friendly hydraulic binders and binder-based materials from the upcycling of by-products - Includes mathematical models for strength estimation

Download or read book Workability and Quality Control of Concrete written by G H Tattersall and published by CRC Press. This book was released on 2003-09-02 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fresh concrete must be produced with the properties required for its intended applications, for example, it must be workable enough to flow into formwork, and to be compacted. This book deals with the measurement of the flow properties of fresh concrete and the factors which affect its workability. Aspects of concrete mixes and control of manufacture to produce optimum properties which relate to workability are covered.

Download or read book Proceedings of SECON 2020 written by Kaustubh Dasgupta and published by Springer Nature. This book was released on 2020-11-20 with total page 959 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers peer-reviewed contributions presented at the 1st International Conference on Structural Engineering and Construction Management (SECON’20), held in Angamaly, Kerala, India, on 14-15 May 2020. The meeting served as a fertile platform for discussion, sharing sound knowledge and introducing novel ideas on issues related to sustainable construction and design for the future. The respective contributions address various aspects of numerical modeling and simulation in structural engineering, structural dynamics and earthquake engineering, advanced analysis and design of foundations, BIM, building energy management, and technical project management. Accordingly, the book offers a valuable, up-to-date tool and essential overview of the subject for scientists and practitioners alike, and will inspire further investigations and research.

Download or read book Eco Efficient Concrete written by Fernando Pacheco-Torgal and published by Elsevier. This book was released on 2013-02-04 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: Eco-efficient concrete is a comprehensive guide to the characteristics and environmental performance of key concrete types.Part one discusses the eco-efficiency and life cycle assessment of Portland cement concrete, before part two goes on to consider concrete with supplementary cementitious materials (SCMs). Concrete with non-reactive wastes is the focus of part three, including municipal solid waste incinerator (MSWI) concrete, and concrete with polymeric, construction and demolition wastes (CDW). An eco-efficient approach to concrete carbonation is also reviewed, followed by an investigation in part four of future alternative binders and the use of nano and biotech in concrete production.With its distinguished editors and international team of expert contributors, Eco-efficient concrete is a technical guide for all professionals, researchers and academics currently or potentially involved in the design, manufacture and use of eco-efficient concrete. - The first part of the book examines the eco-efficiency and life cycle assessment of Portland cement concrete - Chapters in the second part of the book consider concrete with supplementary cementitious materials, including properties and performance - Reviews the eco-efficient approach to concrete carbonation

Download or read book Geopolymers as Sustainable Surface Concrete Repair Materials written by Ghasan Fahim Huseien and published by CRC Press. This book was released on 2022-08-11 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: The progressive deterioration of concrete surface structures is a major concern in construction engineering that requires precise repairing. While a number of repair materials have been developed, geopolymer mortars have been identified as potentially superior and environmentally friendly high-performance construction materials, as they are synthesized by selectively combining waste materials containing alumina and silica compounds which are further activated by a strong alkaline solution. Geopolymers as Sustainable Surface Concrete Repair Materials offers readers insights into the synthesis, properties, benefits and applications of geopolymer-based materials for concrete repair. • Discusses manufacturing and design methods of geopolymer-based materials • Assesses mechanical strength and durability of geopolymer-based materials under different aggressive environmental conditions • Characterizes the microstructure of these materials using XRD, SEM, EDX, TGA, DTG and FTIR measurements • Describes application of geopolymer-based materials as surface repair materials • Compares environmental and cost benefits against those of traditional OPC and commercial repair materials This book is written for researchers and professional engineers working with concrete materials, including civil and materials engineers.