Download or read book The Effect of Environment on Metals at Elevated Temperatures written by Willis Schalliol and published by . This book was released on 1950 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Effect of Environment on the Stress Rupture Properties of Metals at Elevated Temperatures written by Willis Schalliol and published by . This book was released on 1951 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stress-rupture tests in controlled atmospheres have been made with low-carbon steels and with Hastelloy "C." Small differences in the composition of environment produced relatively large differences in the amount of intergranular cracking and in the time to failure. Attention is called to the need for making stress rupture tests of metals in environments similar to their service conditions.
Download or read book Symposium on Basic Effects of Environment on the Strength Scaling and Embrittlement of Metals at High Temperatures written by Davis Evan and published by . This book was released on 1955 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Environmental Degradation of Metals written by U.K. Chatterjee and published by CRC Press. This book was released on 2001-03-02 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highly practical reference presents for the first time in a single volume all types of environmental degradation a metallic compound may undergo during its processing, storage, and service. Clarifying general and localized corrosion effects, Environmental Degradation of Metals describes the effects of atmospheric exposure, high-temperature gases, soil, water, weak and strong chemicals, liquid metals, and nuclear radiation. It determines whether corrosion can occur under a given set of conditions, shows how improvements in component design can reduce corrosion, and details the high- and low-temperature effects of oxidizing agents. The book also investigates the instantaneous and delayed failure of solid metal in contact with liquid metal, highlights the influence of hydrogen on metal, and profiles radiation effects on metal.
Download or read book Symposium on basic effects of environment on the strength scaling and embrittlement of metals at high temperatures presented at the Cincinnati meeting American Society for Testing Materials February 2 1955 written by and published by . This book was released on 1955 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Plasticity and Fatigue at High Temperature written by Denis Benasciutti and published by MDPI. This book was released on 2020-05-20 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: In several industrial fields (such as automotive, steelmaking, aerospace, and fire protection systems) metals need to withstand a combination of cyclic loadings and high temperatures. In this condition, they usually exhibit an amount—more or less pronounced—of plastic deformation, often accompanied by creep or stress-relaxation phenomena. Plastic deformation under the action of cyclic loadings may cause fatigue cracks to appear, eventually leading to failures after a few cycles. In estimating the material strength under such loading conditions, the high-temperature material behavior needs to be considered against cyclic loading and creep, the experimental strength to isothermal/non-isothermal cyclic loadings and, not least of all, the choice and experimental calibration of numerical material models and the selection of the most comprehensive design approach. This book is a series of recent scientific contributions addressing several topics in the field of experimental characterization and physical-based modeling of material behavior and design methods against high-temperature loadings, with emphasis on the correlation between microstructure and strength. Several material types are considered, from stainless steel, aluminum alloys, Ni-based superalloys, spheroidal graphite iron, and copper alloys. The quality of scientific contributions in this book can assist scholars and scientists with their research in the field of metal plasticity, creep, and low-cycle fatigue.
Download or read book High Temperature Environmental Effects on Metals written by Salvatore J. Grisaffe and published by . This book was released on 1977 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature Corrosion written by Anand S Khanna and published by World Scientific. This book was released on 2016-04-07 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This invaluable book reviews the state of the art of high temperature related problems pertaining to their utility, microstructure, mechanical properties, actual behavior in different environments, their protection by various kinds of coatings at high temperatures and a new concept of nanomaterials at high temperatures.The book begins with fundamentals of oxidation and corrosion. Various concepts relating to the modification or deterioration of mechanical properties when material is exposed to an aggressive environment compared to an inert environment or vacuum are also covered. Other chapters highlight the behavior of various advanced materials to high temperature conditions, an important high temperature effect called Active Element Effect, and many high temperature coatings and their behavior.Written by world-renowned authors in their own field, this book will be useful for professionals and academics in materials science and nanoscience.
Download or read book High Temperature Coatings written by Sudhangshu Bose and published by Butterworth-Heinemann. This book was released on 2017-11-27 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Coatings, Second Edition, demonstrates how to counteract the thermal effects of rapid corrosion and degradation of exposed materials and equipment that can occur under high operating temperatures. This is the first true practical guide on the use of thermally protective coatings for high-temperature applications, including the latest developments in materials used for protective coatings. It covers the make-up and behavior of such materials under thermal stress and the methods used for applying them to specific types of substrates, as well as invaluable advice on inspection and repair of existing thermal coatings. With his long experience in the aerospace gas turbine industry, the author has compiled the very latest in coating materials and coating technologies, as well as hard-to-find guidance on maintaining and repairing thermal coatings, including appropriate inspection protocols. The book is supplemented with the latest reference information and additional support to help readers find more application- and industry-type coatings specifications and uses. Offers an overview of the underlying fundamental concepts of thermally-protective coatings, including thermodynamics, energy kinetics, crystallography and equilibrium phases Covers essential chemistry and physics of underlying substrates, including steels, nickel-iron alloys, nickel-cobalt alloys and titanium alloys Provides detailed guidance on a wide variety of coating types, including those used against high temperature corrosion and oxidative degradation and thermal barrier coatings
Download or read book Environmental Effects on Engineered Materials written by Russell H. Jones and published by CRC Press. This book was released on 2001-03-29 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This invaluable reference provides a comprehensive overview of corrosion and environmental effects on metals, intermetallics, glossy metals, ceramics and composites of metals, and ceramics and polymer materials. It surveys numerous options for various applications involving environments and guidance in materials selection and substitution. Exploring a wide range of environments, including aqueous and high-temperature surroundings, Environmental Effects on Engineered Materials examines specific material-environmental interactions; corrosion rates and material limitations; preventive measurements against corrosion; utilization of older materials in recent applications; the use of new materials for existing equipment; and more.
Download or read book Symposium on Effect of Cyclic Heating and Stressing on Metals at Elevated Temperatures written by American Society for Testing and Materials and published by . This book was released on 1954 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Basic Effects of Environment on the Strength Sealing and Embrittlement of Metals at High Temperatures written by American Society For Testing Materials and published by . This book was released on 1955 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Symposium on Basic Effects of Environment on the Strength Scaling and Embrittlement of Metals at High Temperatures written by American Society for Testing Materials and published by . This book was released on 1955 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion Particle Erosion at High Temperatures written by Minerals, Metals and Materials Society. Meeting and published by Minerals, Metals, & Materials Society. This book was released on 1989 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue and Durability of Metals at High Temperatures written by S. S. Manson and published by ASM International. This book was released on 2009 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: From concept to application, this book describes the method of strain-range partitioning for analyzing time-dependent fatigue. Creep (time-dependent) deformation is first introduced for monotonic and cyclic loading. Multiple chapters then discuss strain-range partitioning in details for multi-axial loading conditions and how different loading permutations can lead to different micro-mechanistic effects. Notably, the total-strain method of strain-range partitioning (SRP) is described, which is a methodology that sees use in several industries. Examples from aerospace illustrate applications, and methods for predicting time-dependent metal fatigue are critiqued.
Download or read book Corrosion written by L L Shreir and published by Newnes. This book was released on 2013-10-22 with total page 1233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion, Volume 1: Metal/Environment Reactions is concerned with the subject of corrosion, with emphasis on the control of the environmental interactions of metals and alloys used as materials of construction. Corrosion is treated as a synthesis of corrosion science and corrosion engineering. This volume is comprised of nine chapters; the first of which provides an overview of the principles of corrosion and oxidation, with emphasis on the electrochemical mechanism of corrosion and how the kinetics of cathodic and anodic partial reactions control the rate of overall corrosion reaction. Attention then turns to the effects of environmental factors such as concentration, velocity, and temperature based on the assumption that either the anodic or cathodic reaction, but not both, is rate-controlling. The corrosion of ferrous and non-ferrous metals and alloys, as well as rarer and noble metals, is considered. The reader is also introduced to high-temperature corrosion and mechanical factors that affect corrosion. This book concludes with topics of electrochemistry and metallurgy relevant to corrosion, including the nature of the electrified interface between the metal and the solution; charge transfer across the interface under equilibrium and non-equilibrium conditions; overpotential and the rate of an electrode reaction; and the hydrogen evolution reaction and hydrogen absorption by ferrous alloys. This book will be of value to students as well as workers and engineers in the field of corrosion.
Download or read book A Bibliography on Effect of Temperature on Properties of Metals written by American Society of Mechanical Engineers and published by . This book was released on 1928 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
