Download or read book The Effect of Core and Carburized Surface Microstructural Stability on Residual Stress Evolution During Tempering written by Jan Vatavuk and published by . This book was released on 2009 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is a well-known fact that compressive residual stresses are developed during the quenching process of carburized parts. The main purpose of this work is related to the tempering effects on as-quenched compressive residual stresses of commercial carburized samples. The work was carried out by using SAE 4120 RH steel samples with different diameters (15 and 38 mm), which led to different cooling rates with a direct effect on the nucleus microstructure. The carburized surface microstructure was considered similar. The 15 mm bars nucleus microstructures were predominantly martensitic but bainitic in the larger samples. The as-quenched surface compressive residual stress was lower in the smaller diameter samples. The compressive residual stress reduction due to increasing tempering temperature was continuous for the larger diameter work piece. The smaller diameter samples had different behaviors in two regions; the compressive stress for lower tempering temperatures was reduced, while values were enhanced over higher temperatures.
Download or read book Carburizing written by Geoffrey Parrish and published by ASM International. This book was released on 1999-01-01 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Based on his training in metallurgy and experience in a large British gear manufacturing company, Parrish reviews the microstructural features of metal products that have been carbon case-hardened, and the influence of those features on the more important material properties. He is not concerned with the carbonizing process at all. He primarily addresses students of engineering and ferrous metallurgy, but also stress and design engineers who might want to understand more fully the specifications of the materials they are considering for their designs. He wrote the eight articles to summarize the field's literature of the early 1970s for his own convenience, but at invitation, published them as a series in the Heat Treatment of Metals during 1967-77, and collected them for a first edition of the volume in 1980. Annotation copyrighted by Book News, Inc., Portland, OR.
Download or read book Thermochemical Surface Engineering of Steels Improving Materials Performance written by Eric J. Mittemeijer and published by Woodhead Publishing. This book was released on 2017-11-13 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermochemical surface engineering significantly improves the properties of steels. Edited by two of the world s leading authorities, this important book summarises the range of techniques and their applications. It covers nitriding, nitrocarburizing and carburizing. There are also chapters on low temperature techniques as well as boriding, sheradizing, aluminizing, chromizing, thermo-reactive deposition and diffusion. Reviews the fundamentals of surface treatments and current performance of improved materialsCovers nitriding, nitrocarburizing and carburizing of iron and iron carbon alloysExamines how different thermochemical surface engineering methods can help against corrosion"
Download or read book Failure Analysis of Heat Treated Steel Components written by Lauralice de Campos Franceschini Canale and published by ASM International. This book was released on 2008 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallurgy for the Non Metallurgist Second Edition written by Arthur C. Reardon and published by ASM International. This book was released on 2011-01-01 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: The completely revised Second Edition of Metallurgy for the Non-Metallurgist provides a solid understanding of the basic principles and current practices of metallurgy. This major new edition is for anyone who uses, makes, buys or tests metal products. For both beginners and others seeking a basic refresher, the new Second Edition of the popular Metallurgy for the Non-Metallurgist gives an all-new modern view on the basic principles and practices of metallurgy. This new edition is extensively updated with broader coverage of topics, new and improved illustrations, and more explanation of basic concepts. Why are cast irons so suitable for casting? Do some nonferrous alloys respond to heat treatment like steels? Why is corrosion so pernicious? These are questions that can be answered in this updated reference with many new illustrations, examples, and descriptions of basic metallurgy.
Download or read book Metallography of Steels Interpretation of Structure and the Effects of Processing written by Hubertus Colpaert and published by ASM International. This book was released on 2018-08-01 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated and translated by André Luiz V. da Costa e Silva This book is a combination of a metallographic atlas for steels and cast irons and an introductory textbook covering the fundamentals of phase transformations and heat treatment of these materials. Every important stage of processing, from casting to cold working is clearly discussed and copiously illustrated with metallographs that show the obtained structures, both desired and those achieved when deviations occur. First published in 1951 by Professor Hubertus Colpaert from the Institute for Technological Research (IPT) of São Paulo, Brazil, this book became one of the most important Brazilian references for professionals interested in the processing, treatment, and application of steels and cast irons. In the Fourth Edition and English translation, updated and translated by Professor André Luiz V. da Costa e Silva, the concept of the of the original edition was preserved while the important developments of recent decades, both in metallographic characterization and in steel and iron products, as well as progress in the understanding of the transformations that made the extraordinary developments of these alloys possible, were added. Most metallographs are of actual industrial materials and a large number originate from industry leaders or laboratories at the forefront of steel and iron development. As steel continues to be the most widely used metallic material in the world, Metallography of Steels continues to be an essential reference for students, metallographers, and engineers interested in understanding processing-properties-structure relationships of the material. The balance between theoretical and applied information makes this book a valuable companion for even experienced steel practitioners.
Download or read book Residual Stresses 2018 written by Marc Seefeldt and published by Materials Research Forum LLC. This book was released on 2018-10-10 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European Conference on Residual Stresses (ECRS) series is the leading European forum for scientific exchange on internal and residual stresses in materials. It addresses both academic and industrial experts and covers a broad gamut of stress-related topics from instrumentation via experimental and modelling methodology up to stress problems in specific processes such as welding or shot-peening, and their impact on materials properties. Chapters: Diffraction Methods; Mechanical Relaxation Methods; Acoustic and Electromagnetic Methods; Composites, Nano and Microstructures; Films, Coatings and Oxides; Cold Working and Machining; Heat Treatments and Phase Transformations; Welding, Fatigue and Fracture: Stresses in Additive Manufacturing.
Download or read book Bearing Steels written by J. J. C. Hoo and published by ASTM International. This book was released on 1975 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallography and Microstructure in Ancient and Historic Metals written by David A. Scott and published by Getty Publications. This book was released on 1992-01-02 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: David A. Scott provides a detailed introduction to the structure and morphology of ancient and historic metallic materials. Much of the scientific research on this important topic has been inaccessible, scattered throughout the international literature, or unpublished; this volume, although not exhaustive in its coverage, fills an important need by assembling much of this information in a single source. Jointly published by the GCI and the J. Paul Getty Museum, the book deals with many practical matters relating to the mounting, preparation, etching, polishing, and microscopy of metallic samples and includes an account of the way in which phase diagrams can be used to assist in structural interpretation. The text is supplemented by an extensive number of microstructural studies carried out in the laboratory on ancient and historic metals. The student beginning the study of metallic materials and the conservation scientist who wishes to carry out structural studies of metallic objects of art will find this publication quite useful.
Download or read book Metals Abstracts written by and published by . This book was released on 1992 with total page 924 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Residual Stress and Deformation of Steel written by George E. Totten and published by ASM International. This book was released on 2002 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Examines the factors that contribute to overall steel deformation problems. The 27 articles address the effect of materials and processing, the measurement and prediction of residual stress and distortion, and residual stress formation in the shaping of materials, during hardening processes, and during manufacturing processes. Some of the topics are the stability and relaxation behavior of macro and micro residual stresses, stress determination in coatings, the effects of process equipment design, the application of metallo- thermo-mechanic to quenching, inducing compressive stresses through controlled shot peening, and the origin and assessment of residual stresses during welding and brazing. Annotation c. Book News, Inc., Portland, OR (booknews.com)
Download or read book Gear Materials Properties and Manufacture written by Joseph R. Davis and published by ASM International. This book was released on 2005 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: All of the critical technical aspects of gear materials technology are addressed in this new reference work. Gear Materials, Properties, and Manufacture is intended for gear metallurgists and materials specialists, manufacturing engineers, lubrication technologists, and analysts concerned with gear failures who seek a better understanding of gear performance and gear life. This volume complements other gear texts that emphasize the design, geometry, and theory of gears. The coverage begins with an overview of the various types of gears used, important gear terminology, applied stresses and strength requirements associated with gears, and lubrication and wear. This is followed by in-depth treatment of metallic (ferrous and nonferrous alloys) and plastic gear materials. Emphasis is on the properties of carburized steels, the material of choice for high-performance power transmission gearing.
Download or read book Steel Heat Treatment written by George E. Totten and published by CRC Press. This book was released on 2006-09-28 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of two self-contained volumes belonging to the newly revised Steel Heat Treatment Handbook, Second Edition, this book examines the behavior and processes involved in modern steel heat treatment applications. Steel Heat Treatment: Metallurgy and Technologies presents the principles that form the basis of heat treatment processes while incorporating detailed descriptions of advances emerging since the 1997 publication of the first edition. Revised, updated, and expanded, this book ensures up-to-date and thorough discussions of how specific heat treatment processes and different alloy elements affect the structure and the classification and mechanisms of steel transformation, distortion of properties of steel alloys. The book includes entirely new chapters on heat-treated components, and the treatment of tool steels, stainless steels, and powder metallurgy steel components. Steel Heat Treatment: Metallurgy and Technologies provides a focused resource for everyday use by advanced students and practitioners in metallurgy, process design, heat treatment, and mechanical and materials engineering.
Download or read book Metal Fatigue Effects of Small Defects and Nonmetallic Inclusions written by Yukitaka Murakami and published by Elsevier. This book was released on 2002-04-29 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal fatigue is an essential consideration for engineers and researchers who are looking at factors that cause metals to fail through stress, corrosion, etc. This is an English translation of a book originally published in Japan in 1993, with an additional two chapters on the fatigue failure of steels and the effect of surface roughness on fatigue strength. The methodology is based on important and reliable results and may be usefully applied to other fatigue problems not directly treated in this book.
Download or read book Metals Abstracts Index written by and published by . This book was released on 1995 with total page 1390 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Materials 2 written by Michael F. Ashby and published by Elsevier. This book was released on 2014-06-28 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough explanation of the basic properties of materials; of how these can be controlled by processing; of how materials are formed, joined and finished; and of the chain of reasoning that leads to a successful choice of material for a particular application. The materials covered are grouped into four classes: metals, ceramics, polymers and composites. Each class is studied in turn, identifying the families of materials in the class, the microstructural features, the processes or treatments used to obtain a particular structure and their design applications. The text is supplemented by practical case studies and example problems with answers, and a valuable programmed learning course on phase diagrams.
Download or read book The Influence of Microstructure on the Properties of Case carburized Components written by Geoffrey Parrish and published by . This book was released on 1980 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
