Download or read book The Economics of Made to Order Production written by Thomas R. Gulledge and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: The airframe industry is usually recognized as being different from most manufacturing industries. These differences, which are characterized by the number of units produced and the frequency of design changes, have been evident for many years. This uniqueness and the corresponding implications for cost estimation became particularly evident during World War II. The aircraft industry generally has been considered unique in that it differs from other manufacturing in the quantity of units manufactured and with the frequency with which changes are made during the course of manufacturing operations. In mass-production industries, manufacturing thousands or hundreds of thousands of identical units, methods and cost of production tend to remain fairly constant after production has been stabilized, whereas in the aircraft industry, method improvements are constantly being made and cost is a variable depending on the number of airplanes being manufactured (Berghell, 1944). These differences, coupled with political considerations, place unusual demands on cost modelers. This has been particularly true in recent years where large cost overruns have generated Congressional demands for better cost estimates. Traditionally, cost estimators in the airframe industry have used one or more of the following estimating techniques: 1. industrial engineering time standards, 2. parametric cost estimating models, 3. learning curves. All of the methods have been used with mixed results in specific situations. The general emphasis of all three approaches is cost estimation for planning purposes prior to beginning production, although some of the techniques may be used during the production phase of a program.
Download or read book Make to Order Vs Make to Stock written by Lode Li and published by Forgotten Books. This book was released on 2015-08-05 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Make-to-Order Vs; Make-to-Stock: The Role of Inventory in Delivery-Time Competition The make-to-order versus make-to-inventory question is a fundamental one in organizing and controlling production, but the one that has been subject to relatively little formal modeling in either economics or operations management literatures. One exception is the recent paper by Milgrom and Roberts (1987) that uses a newsboy-type model to formalize the idea that inventories and information about demand are substitutes for one another in production. Their results suggest that firms should employ only one of the two strategies: firms either produce for inventory or produce to order, but not the both. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Production Control written by J. W. M. Bertrand and published by . This book was released on 1990 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Production Economics written by Anoop Desai and published by CRC Press. This book was released on 2018-08-06 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves a unique purpose within the world of engineering. It covers the economics of modern manufacturing and focuses on examining the techniques and methods from a cost perspective. It can be used by both students and professionals alike. The book is useful to students in industrial engineering and mechanical engineering programs as a primary textbook for engineering economy, production costing, and related courses. It can also be used by MBA students specializing in production management and finance. Specific topics of coverage include the computation of direct and indirect cost for manufacturing operations, including a variety of overhead operations in such an environment. Costing of manufacturing methods such as casting, forging, turning, milling, and welding is addressed along with inventory analysis. The book also includes fundamental concepts such as cash flow analysis, present and future worth analysis, and rate of return analysis. Related topics such as equipment replacement, comparison of alternatives, depreciation, buy versus make decisions, interest factors, and equivalence are covered in detail as well. Key Features: Addresses the costing of manufacturing operations through a step-by-step problem solving approach. Includes traditional engineering topics such as cash flow analysis, present worth, future worth analysis, replacement analysis, equivalence, and depreciation are addressed in depth as well. Offers a variety of solved examples that can be used to develop a thorough understanding of the underlying concept. Provides a number of practice problems at the end of each chapter. Presents a large number of figures and tables in almost every chapter, to assist in visualizing the concept and apply it successfully. Production Economics: Evaluating Costs of Operations in Manufacturing and Service Industries focuses on rigorous problem solving. Each topic is presented succinctly along with numerous solved examples, along with a large number of end-of-chapter practice problems where applicable.
Download or read book 42 Rules for Sourcing and Manufacturing in China 2nd Edition written by Rosemary Coates and published by Happy About. This book was released on 2013-07 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt: Doing business in China is tougher than you think. Not only is the culture vastly different, but China's experience in manufacturing is still developing. It will be a few years before the majority of manufacturers are up to world standards. In the meantime, quality, contract laws, schedules and logistics must be closely monitored. As a result, the things Westerners must do to be successful are far different from dealing with American or European manufacturers. The best way to quickly come up to speed on these differences and how to handle them is to learn from the experience of others. Through over 20 extraordinary executive interviews, Rosemary Coates captured the essence of sourcing and manufacturing in China. '42 Rules for Sourcing and Manufacturing in China (2nd Edition)' is a pragmatic approach that every businessperson headed to China must read. For business people who are experienced in doing business in China, or for first-time visitors, this book will provide valuable insights from real executives and experts. These executives offer their personal experiences and recommendations about sourcing and manufacturing in China. Going beyond simple cultural do's and don'ts, you will discover: how business is really done how you can make things happen in China the mistake westerners often make, and how to avoid them what made these executives successful Based on her 25 years of supply chain experience, much of it spent living and working across Asia, Rosemary Coates has become an expert on doing business in China. Her own personal experiences in China are interwoven into this book.
Download or read book Theory of Production and Cost written by Günter Fandel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production theory and the theory of cost both belong to the central areas of business administration, for all considerations concerning the economic organization of industrial manufacturing processes start from these. Two developments in the past 30 years have had a considerable influence on the structure and the concentration on points of emphasis in this book. I am referring to findings from KOOPMANS' activity analysis and to the formulation by GUTENBERG of a production function concept that focuses on industrial production processes. Activity analysis has made it possible to develop, from a uniform approach, different types of production functions which describe the concrete principles of production in the productive sector of a business enterprise; this has created a common basis for all production concepts in business administration. The Gutenberg Production Function with its different kinds of adjustment to a changing output has opened up a flexibility to theoretical and practical considerations that gave rise to a large number of additional studies in this area. Considerations in cost theory were in particular need of considerable extensions in the direction of cost minimal combined adjustment processes. By means of the organization of its contents, this book will take both approaches into due account. In that way, it is vastly different from other books dealing with the same subject. As a matter of course, traditional analytical methods and ways of thinking also constitute a large part of the book.
Download or read book Capacity and Inventory Planning for Make to Order Production Systems written by Klaus Altendorfer and published by Springer Science & Business Media. This book was released on 2013-07-31 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents different models for the simultaneous optimization problem of capacity investment and work release rule parameterization. The overall costs are minimized either including backorder costs or considering a service level constraint. The available literature is extended with the integration of a distributed customer required lead time in addition to the actual demand distribution. Furthermore, an endogenous production lead time is introduced. Different models for make-to-order production systems with one or multiple serial processing stages are developed. Capacity investment is linked to the processing rates of the machines or to the number of the machines. Results are equations for service level, tardiness, and FGI lead time in such a production system. For special cases with M/M/1 and M/M/s queues explicit solutions of the optimization problems or optimality conditions concerning capacity investment and work release rule parameterization are provided.
Download or read book Production to Order written by Nico Dellaert and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, production rules are studied for situations which share some important elements. The most important one is that the products are manufactured according to customer specifications and they will not be manufactured unless they have been ordered. Other elements are the set-ups on the machines, which make a clustering of orders necessary, the backlogging of late orders, a production process with one bottle-neck and a stochastic demand. The purpose is to find a simple production rule, which offers possibilities for a simple adaptation to the varying wishes or to additional complications. The production rules under consideration are well-known heuristics such as the Silver-Meal heuristic and the Wagner-Whitin heuristic, which can be adapted for backlogging and for the stochastic demand. Also a new, simple rule is introduced: the (x,T)-rule. To determine and compare the performance of the production rules different techniques have been used, such as simulation, dynamic programming and markovian models. Among the situations that have been considered are situations with capacity restrictions, overtime possibilities and situations where the clients react to the performance of their orders.
Download or read book Production Economics written by Svend Rasmussen and published by Springer Science & Business Media. This book was released on 2012-08-04 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the basic theory of how, what and when firms should produce to maximise profits. Based on the neoclassical theory of the firm presented in most general microeconomic textbooks, it extends the general treatment and focuses on the application of the theory to specific problems that the firm faces when making production decisions to maximise profits. Increasing level of government regulation and the use of specialised and often very expensive equipment in modern production motivates the following focus areas: 1) How to optimise production under restrictions., 2) Treatment of fixed inputs and the process of input fixation, 3) Optimisation of production over time, 4) Linear and Mixed Integer Programming as tools for optimisation in practice. This updated second edition includes a more comprehensive introduction to the theory of decision making under risk and uncertainty as well as a new chapter on how to use linear programming to generate the supply function of the firm.
Download or read book Enabling Manufacturing Competitiveness and Economic Sustainability written by Michael F. Zaeh and published by Springer Science & Business Media. This book was released on 2013-09-12 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The changing manufacturing environment requires more responsive and adaptable manufacturing systems. The theme of the 5th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2013) is "Enabling Manufacturing Competitiveness and Economic Sustainability. Leading edge research and best implementation practices and experiences, which address these important issues and challenges, are presented. The proceedings include advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, re-configurability and flexibility. New and important concepts such as the dynamic product families and platforms, co-evolution of products and systems, and methods for enhancing manufacturing systems' economic sustainability and prolonging their life to produce more than one product generation are treated. Enablers of change in manufacturing systems, production volume and capability, scalability and managing the volatility of markets, competition among global enterprises and the increasing complexity of products, manufacturing systems and management strategies are discussed. Industry challenges and future directions for research and development needed to help both practitioners and academicians are presented. About the Editor Prof. Dr.-Ing. Michael F. Zaeh, born in 1963, has been and is Professor for and Manufacturing Technology since 2002 and, together with Prof. Dr.-Ing. Gunther Reinhart, Head of the Institute for Machine Tools and Industrial Management (iwb) at the Technische Universitaet Muenchen (TUM). After studying general mechanical engineering, he was doctoral candidate under Prof. Dr.-Ing. Joachim Milberg at TUM from 1990 until 1993 and received his doctorate in 1993. From 1994 to 1995, he was department leader under Prof. Dr.-Ing. Gunther Reinhart. From 1996 to 2002, he worked for a machine tool manufacturer in several positions, most recently as a member of the extended management. Prof. Dr.-Ing. Michael F. Zaeh is an associated member of the CIRP and member of acatech, WGP and WLP. His current researches include among others Joining and Cutting Technologies like Laser Cutting and Welding as well as Friction Stir Welding, Structural Behaviour and Energy Efficiency of Machine Tools and Manufacturing Processes like Additive Manufacturing.
Download or read book Fragmentation written by Sven W. Arndt and published by OUP Oxford. This book was released on 2001-02-08 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Fragmentation" is a term used in this volume to describe cross-border component specialization and production-sharing. Examination of recent trade data suggests that offshore sourcing of parts and components, as well as offshore assembly, are assuming an increasing role in the world economy. The theoretical implications of this type of specialization are examined in several chapters with the aid of both Ricardian and Heckscher-Ohlin trade models. Production is first decomposed ("fragmented") into its constituent parts and activities, and then it is at this level that factor-intensities and technologies are calibrated. The implications of intra-product specialization and component trade are investigated under conditions of free, restricted, and preferential trade. The role of multinationals is explored and the importance of cross-border service-links among component activities is examined. Overall, extension of the principle of comparative advantage beyond products to the realm of parts and components is welfare-enhancing. Industries take advantage of offshore sourcing in order to reduce costs and increase competitiveness. Component specialization offers new and additional opportunities for the exploitation of scale economies. Across a broad range of conditions, it raises output and employment. Its effects on wages are spelled out. Trade between advanced, high-wage and developing low-wage countries is an obvious candidate for the two-way application of component specialization. The empirical part of the volume presents an evaluation of new data which allow the separation of trade in components and in final products. It also provides assessments of the role of component specialization in the trade of several countries and regions. In addition to their relevance for trade theorists and country specialists, the studies collected in this volume have interesting implications for the conduct of trade policy. They contradict claims that trade with low-wage countries must be welfare-reducing and they suggest new approaches to industrialization and economic development.
Download or read book Unit Manufacturing Processes written by National Research Council and published by National Academies Press. This book was released on 1995-01-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing, reduced to its simplest form, involves the sequencing of product forms through a number of different processes. Each individual step, known as an unit manufacturing process, can be viewed as the fundamental building block of a nation's manufacturing capability. A committee of the National Research Council has prepared a report to help define national priorities for research in unit processes. It contains an organizing framework for unit process families, criteria for determining the criticality of a process or manufacturing technology, examples of research opportunities, and a prioritized list of enabling technologies that can lead to the manufacture of products of superior quality at competitive costs. The study was performed under the sponsorship of the National Science Foundation and the Defense Department's Manufacturing Technology Program.
Download or read book Enabling Manufacturing Competitiveness and Economic Sustainability written by Hoda A. ElMaraghy and published by Springer Science & Business Media. This book was released on 2011-09-29 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: The changing manufacturing environment requires more responsive and adaptable manufacturing systems. The theme of the 4th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2011) is “Enabling Manufacturing Competitiveness and Economic Sustainability”. Leading edge research and best implementation practices and experiences, which address these important issues and challenges, are presented. The proceedings include advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, re-configurability and flexibility. New and important concepts such as the dynamic product families and platforms, co-evolution of products and systems, and methods for enhancing manufacturing systems’ economic sustainability and prolonging their life to produce more than one product generation are treated. Enablers of change in manufacturing systems, production volume and capability scalability and managing the volatility of markets, competition among global enterprises and the increasing complexity of products, manufacturing systems and management strategies are discussed. Industry challenges and future directions for research and development needed to help both practitioners and academicians are presented.
Download or read book Planning of Combined Make to order and Make to stock Production written by Bartholomeus Jacobus Beemsterboer and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manufacturing Matters written by Stephen S. Cohen and published by New York : Basic Books. This book was released on 1987-06-03 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Economic Problems of the Lumber and Timber Products Industry written by Peter Anthony Stone and published by . This book was released on 1936 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Production Economics written by Anoop Desai and published by CRC Press. This book was released on 2018-08-06 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves a unique purpose within the world of engineering. It covers the economics of modern manufacturing and focuses on examining the techniques and methods from a cost perspective. It can be used by both students and professionals alike. The book is useful to students in industrial engineering and mechanical engineering programs as a primary textbook for engineering economy, production costing, and related courses. It can also be used by MBA students specializing in production management and finance. Specific topics of coverage include the computation of direct and indirect cost for manufacturing operations, including a variety of overhead operations in such an environment. Costing of manufacturing methods such as casting, forging, turning, milling, and welding is addressed along with inventory analysis. The book also includes fundamental concepts such as cash flow analysis, present and future worth analysis, and rate of return analysis. Related topics such as equipment replacement, comparison of alternatives, depreciation, buy versus make decisions, interest factors, and equivalence are covered in detail as well. Key Features: Addresses the costing of manufacturing operations through a step-by-step problem solving approach. Includes traditional engineering topics such as cash flow analysis, present worth, future worth analysis, replacement analysis, equivalence, and depreciation are addressed in depth as well. Offers a variety of solved examples that can be used to develop a thorough understanding of the underlying concept. Provides a number of practice problems at the end of each chapter. Presents a large number of figures and tables in almost every chapter, to assist in visualizing the concept and apply it successfully. Production Economics: Evaluating Costs of Operations in Manufacturing and Service Industries focuses on rigorous problem solving. Each topic is presented succinctly along with numerous solved examples, along with a large number of end-of-chapter practice problems where applicable.
