Download or read book The Economic Feasibility of Utilizing Energy Cane in the Cellulosic Production of Ethanol written by Kayla Brown and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Economic Evaluation of U S Ethanol Production from Ligno cellulosic Feedstocks written by Youn-Sang Choi and published by . This book was released on 1998 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper evaluates the economic feasibility and economy-wide impacts of the U.S. ethanol production from lignocellulosic feedstocks (LCF) using Tennessee Valley Authority's (TVA's) dilute acid hydrolysis process. A nonlinear mathematical programming model of a single ethanol producer, whose objective is profit maximization, is developed. Because of differences in their chemical composition and production process, lignocellulosic feedstocks are divided into two groups: Biomass feedstocks, which refer to crop residues, energy crops and woody biomass, and municipal solid waste (MSW). Biomass feedstocks are more productive and less costly in producing ethanol and co-products, while MSW generates an additional income to the producer from a tipping fee and recycling. The analysis suggests that, regardless of types of feedstocks used, TVA's conversion process can enhance the economic viability of ethanol production as long as furfural is produced from the hemicellulose fraction of feedstocks as a co-product. The high price of furfural makes it a major factor in determining the economic feasibility of ethanol production. Along with evaluating economic feasibility of LCF-to-ethanol production, the optimal size of a plant producing ethanol using TVA's conversion process is estimated. The larger plant would have the advantage of economies of scale, but also have a disadvantage of increased collection and transportation costs for bulky biomass from more distant locations. We assume that the plant is located in the state of Missouri and utilizes only feedstocks produced in the state. The results indicate that the size of a plant using Biomass feedstocks is much bigger than one using MSW. The difference of plant sizes results from plant location and feedstock availability. One interesting finding is that energy crops are not feasible feedstocks for LCF-to-ethanol production due to their high price. Next, a static CGE model is developed to estimate the U.S. economy-wide impacts of the current ethanol production with a government subsidy and the LCF-to-ethanol production using TVA's dilute acid hydrolysis process. The model is innovative in three ways. First, a production subsidy is explicitly included in the model. Second, co-products are explicitly accounted for in ethanol production. Third, ethanol and gasoline are treated as perfect demand substitutes, as are the co-products and the manufacturing sector's output. The CGE model shows that current ethanol production expands grain crop production by creating an additional demand. In contrast, LCF-to-ethanol production has adverse impacts on grain crop production because Biomass feedstocks substitute for grain in the production of ethanol. The LCF-to-ethanol production also discourages the manufacturing industry because co-products displace a part of intermediate input demand for manufacturing outputs. It is also found that, even though ethanol production using TVA's conversion technology with MSW is economically viable, it is not favorable to the economy. Finally, the results suggest that ethanol production from Biomass feedstocks using TVA's dilute acid hydrolysis process is beneficial to the U.S. economy.
Download or read book Sugarcane Biofuels written by Muhammad Tahir Khan and published by Springer. This book was released on 2019-06-29 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sugarcane exhibits all the major characteristics of a promising bioenergy crop including high biomass yield, C4 photosynthetic system, perennial nature, and ratooning ability. Being the largest agricultural commodity of the world with respect to total production, sugarcane biomass is abundantly available. Brazil has already become a sugarcane biofuels centered economy while Thailand, Colombia, and South Africa are also significantly exploiting this energy source. Other major cane producers include India, China, Pakistan, Mexico, Australia, Indonesia, and the United States. It has been projected that sugarcane biofuels will be playing extremely important role in world’s energy matrix in recent future. This book analyzes the significance, applications, achievements, and future avenues of biofuels and bioenergy production from sugarcane, in top cane growing countries around the globe. Moreover, we also evaluate the barriers and areas of improvement for targeting efficient, sustainable, and cost-effective biofuels from sugarcane to meet the world’s energy needs and combat the climate change.
Download or read book Routes to Cellulosic Ethanol written by Marcos Silveira Buckeridge and published by Springer Science & Business Media. This book was released on 2011-01-07 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The perception that civilization is crossing a period of Global Climatic Changes that can seriously threaten our lifestyle, along with energy security and the search for prosperity, are the main drivers that are pushing men to use more biomass as a source of energy. It will be crucial that such intent will include a large parcel of sustainability so that more renewable energy becomes available for populations. Because large amounts of energy are “hidden” in carbon polymers made by plants, notably carbohydrates, it is obvious that if technologies are developed to produce liquid fuels such as ethanol from carbohydrate polymers such as cellulose, men could significantly increase energy sustainability . This book reviews general aspects of biomass utilization for bioenergy production as well as strategies using biochemistry, molecular biology, chemistry and physics to disassemble plant cell walls. Recent discoveries of basic science under development in several laboratories in the world are reviewed by experts that have been intensively working with many aspects that will impact the development of the technology of production of cellulosic ethanol.
Download or read book Sugarcane Bioethanol written by Luís Augusto Barbosa Cortez and published by . This book was released on 2010 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Brazil, sugarcane ethanol supplied, in 2009, 17.6 % of the energy for land transportation (excluding railroads)and about 55% of the total energy supplied by liquid fuel for Otto cycle engines. Besides the lower production costs ethanol produced from sugarcane in Brazil has another important advantage: in Central-South Brazil only 1 unit of fossil energy is used for each 8-9 units of energy produced by ethanol from sugarcane. Carbon emissions reduction also benefits from sugarcane ethanol: for each cubic meter of ethanol used as fuel, there is net saving of around 2 t CO2 not emitted to the atmosphere while, at the same time, no SO2 is emitted. Sugarcane was introduced in Brazil in 1532. The "Brazilian model" of producing concomitantly sugar and ethanol, brought important technical benefits and made possible an outstanding increase in the competitiveness in the international market for sugar and ethanol. Today about 50% of the sucrose of sugarcane produced in the country is directed to the production of sugar while another half is used to produce Ethanol. Industrial and academic R&D has helped to increase the productivity of ethanol steadily over the past 35 years, at a rate of 3.2% per year. Productivity gains implied savings of planted area by a factor of 2.6. In 2009/2010 the area planted with sugarcane for Ethanol production was 4.2 Mha, amounting to 1% of the total arable land available in Brazil. About 60% of the Ethanol produced in Brazil comes from the State of Sao Paulo, where the productivity is the highest (around 86 t/ha.year). Most of the recent expansion is happening in the center-west region of the country, in degraded pasture lands. The FAPESP Program for Research on Bioenergy, BIOEN, aims at articulating public and private R&D, using academic and industrial laboratories to advance and apply knowledge in fields related to ethanol production in Brazil. The BIOEN Program has a solid core for supporting academic exploratory research activities that will generate new knowledge and form scientists and professionals essential for advancing industry capacity in ethanol related technologies. On top of this, BIOEN includes partnerships with industry for cooperative R&D activities between industrial and academic laboratories, which are to be co-funded by FAPESP and industry.Federal agencies, such as CNPq, will also co-fund the research.
Download or read book Biochemical Conversion of Lignocellulosic Biomass to Ethanol written by Deepak Kumar and published by . This book was released on 2014 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ethanol production from lignocellulosic feedstock has been under intense scrutiny as a transportation fuel due to its potential to address concerns of increasing energy consumption, limited fossil energy resources, climate changes due to greenhouse gas emissions from fossil fuels, and especially use of non-food biomaterials, which address the biggest limitation of first generation bioethanol. Despite these advantages, the lignocellulosic ethanol production on commercial scale is still on verge because of high processing costs of ethanol production. In the biochemical conversion process, biomass is converted to ethanol by sequential steps of pretreatment (to reduce the recalcitrance of biomass), hydrolysis (conversion of sugar polymers to monomers) and fermentation (sugars to ethanol). Every year, about a million ton of grass straw is available as agricultural residue in Pacific Northwest. There were no previous comprehensive studies to evaluate the technical feasibility, economic viability and environmental sustainability of the bioethanol produced using grass straw in Willamette valley. The focus of this dissertation was to investigate the potential of cellulosic ethanol production from grass straw, assess the techno-economic viability and environmental impacts of the bioethanol production and development of a stochastic molecular model for modeling cellulose hydrolysis. This dissertation was divided into four studies focused on individual aspects of the overall objective. The first study evaluated the ethanol production potential from straws produced from three major grass seed varieties (perennial ryegrass (Lolium perenne L.), tall fescue (Festuca arundinacea Schreb) and bentgrass (Agrostis sp.)) in Pacific Northwest. Feedstocks were pretreated using three chemical pretreatments (dilute acid, dilute alkali, and hot water) and subsequently hydrolyzed enzymatically to investigate the effect of pretreatment and estimate the potential ethanol yields. Carbohydrate content in biomass varied from 40.6 to 52.9%, with tall fescue having the maximum cellulose content of 32.4%. All pretreatment were effective in increasing the hydrolysis yields, and theoretical maximum ethanol yields were in the range of 276 to 360 L per ton of biomass. The second study performed the comprehensive techno-economic analysis of ethanol production from tall fescue using dilute acid, dilute alkali, hot water, and steam explosion pretreatment technologies. Detailed process models incorporating all unit operations in lignocellulosic ethanol plant with 250,000 metric ton biomass/ year processing capacity were developed in SuperPro Designer. The ethanol production cost were estimated from $0.81 to $0.88/ L of ethanol, and were found highly sensitive to biomass price, enzyme cost, and pentose sugar fermentation efficiency. Energy from lignin residue burning was found sufficient to meet the steam requirement in the production process. Third study performed the life cycle assessment for bioethanol production from grass straw considering various pretreatment technology options. The study revealed that ethanol production from grass straw provide environmental benefits compared to use of gasoline, with 57.43-112.67% reduction in fossil energy use to produce 10,000 MJ of fuel. The GHG emissions during life cycle of ethanol production were estimated in the range of -131 to -555.4 kg CO2 eq. per 10,000 MJ of fuel. It was observed that assumptions and allocation procedure used during the analysis had a significant effect on the LCA results. During the techno-economic assessment of bioethanol process, it was found that cost of cellulose enzymes was significant fraction of the total ethanol production cost. A comprehensive enzymatic hydrolysis model can play critical role in optimizing the enzyme composition and dosage, improving understanding of the process mechanism and reducing the cost of enzymes, a major bottleneck in the ethanol production process. A novel approach of stochastic molecular modeling, in which each hydrolysis event is translated into a discrete event, was used to develop a mechanistic model for cellulose hydrolysis in the fourth study. Cellulose structure was modeled as a group of microfibrils consisting of elementary fibrils bundles, where each elementary fibril was represented as a three dimensional matrix of glucose molecules. Major structural properties: crystallinity, degree of polymerization, surface accessibility, and enzyme characteristics: mode of action, binding and surface blockage, inhibition, along with the dynamic morphological changes in structure of cellulose were incorporated in the model. Hydrolysis of cellulose was simulated based on Monte Carlo simulation technique. Hydrolysis results predicted by model simulations had shown a good fit with the experimental data from hydrolysis of pure cellulose using purified enzymes for various hydrolysis conditions. The model was effective in capturing the dynamic behavior of cellulose hydrolysis during action of individual as well as multiple cellulases. Model was able to simulate and validate all the important expected experimental observations: effect of structural properties, enzyme inhibition and enzyme loadings on the hydrolysis and degree of synergism on different substrates. The work from this dissertation proved the significance of choosing technology options, drew a comparison among different pretreatment technologies, identified the critical processes and inputs that have significant effect on the ethanol production cost, net energy, and GHG emissions. Results from the last study confirmed the validity of using the stochastic molecular modeling approach to quantitatively and qualitatively describe the cellulose hydrolysis, which has wide potential application in bioethanol production research to reduce the enzyme cost.
Download or read book Process Development Studies on the Bioconversion of Cellulose and Production of Ethanol written by Charles R. Wilke and published by . This book was released on 1978 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optimization of Cellulosic Biomass Analysis written by Dustin Shearer and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Ethanol has become an important source of energy for transportation purposes in the U.S. The majority of the feedstock for this ethanol is corn grain. The use of crop residues and perennial grasses has been proposed as an alternative feedstock for ethanol production using cellulosic conversion processes. Commercial scale production of cellulosic ethanol is still on the horizon. In the meantime a wide variety of studies examining both the technical and economic feasibility of cellulosic ethanol production have been conducted. This is the first study that combines both county level cellulosic feedstock production and farmer participation rates to determine the feasibility of supplying it to cellulosic ethanol plants. This research determines the economic feasibility of supplying cellulosic feedstocks to seven potential add-on cellulosic ethanol plants of 25 million gallons per year at seven existing starch ethanol plants in Kansas. The feedstocks considered are corn stover, sorghum stalks, wheat straw, and perennial switchgrass. A mixed integer programing model determines the amount and mix of cellulosic feedstocks that can be delivered to these plants over a range of plant-gate feedstock prices given transportation costs and farm-gate production costs or breakeven prices. The variable costs of shipping are subtracted from the difference between plant-gate price and farm-gate price to find savings to the plant. The objective function of the model minimizes transportation costs which in turn maximizes savings to the plant. The role switchgrass may have as a feedstock given various switchgrass production subsidies is examined. The results indicate the minimum plant-gate price that must be paid to feedstock producers for all plants to have enough cellulosic feedstocks is $75 per dry ton. Switchgrass feedstocks were only a minor portion of biomass supplied and used without a production subsidy. A Biomass Crop Assistance Program payment increased the supply of switchgrass more than other production subsidies.
Download or read book Technical and Economical Assessment of Thermo mechanical Extrusion Pretreatment for Cellulosic Ethanol Production written by Juhyun Yoo and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The Renewable Fuel Standard (RFS) in the Energy Independence and Security Act of 2007 has set the goal of 36 billion gallons of annual ethanol production in the U.S. by 2022, which is equivalent to 17.5% of the current gasoline consumption in the U.S. However, corn ethanol is expected to plateau at a level of 7.3% of current gasoline consumption on an energy-equivalent basis. Thus, it is essential to utilize a variety of substrates including lignocellulosic biomass from perennial energy crops such as switch grass, crop residues such as corn and sorghum stover, and agri-industrial co-products such as soybean hulls and wheat bran. Lignocellulosic substrates have a recalcitrant nature and require a pretreatment step that is critical for efficient enzymatic hydrolysis of cellulose and hemicellulose to fermentable sugars. In this study, soybean hulls were used as a model substrate for cellulosic ethanol. A novel thermo-mechanical pretreatment process using extrusion was investigated and compared with two traditional pretreatment methods, dilute acid and alkali hydrolysis, with regard to structural changes in the lignocellulosic substrate, and glucose and ethanol yields. The effect of extrusion parameters, such as barrel temperature, in-barrel moisture and screw speed, on glucose yield from soybean hulls was determined. Optimum processing conditions were screw speed of 350 rpm, maximum barrel temperature of 80°C and 40% in-barrel moisture content, resulting in 95% cellulose conversion to glucose. Compared with untreated soybean hulls, the cellulose to glucose conversion of soybean hulls increased by 69.5, 128.4 and 132.2% for dilute acid, alkali and thermo-mechanical pretreatments, respectively. Glucose and other hexose sugars such as mannose and galactose were effectively fermented by Saccharomyces cerevisiae, resulting in ethanol yields of 13.04--15.44 g/L. Fermentation inhibitors glycerol, furfural, 5-(hydroxymethyl)-2-furaldehyde (HMF) and acetic acid were found in the thermo-mechanically pretreated substrate, ranging in concentrations from 0.072--0.431, 0--0.049, 0--0.023 and 0.181--0.278 g/L, respectively, which were lower than those reported from acid hydrolyzed substrates. The economic feasibility of commercial cellulosic ethanol production processes employing dilute acid hydrolysis and thermo-mechanical pretreatment were compared using a system dynamics modeling approach. It was concluded that low feedstock cost and high sugar conversion are important factors that can make cellulosic ethanol production commercially viable. Thermo-mechanical pretreatment was a more promising technology as compared to dilute acid hydrolysis because of the lower capital and operating costs, and higher sugar conversion.
Download or read book Economic Feasibility of Gasohol written by United States. Congress. Senate. Committee on Agriculture, Nutrition, and Forestry. Subcommittee on Agricultural Research and General Legislation and published by . This book was released on 1978 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Economic Feasibility of Ethanol Production from Sugar in the United States written by Hosein Shapouri and published by . This book was released on 2006 with total page 69 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Feasibility Study for Co Locating and Integrating Ethanol Production Plants from Corn Starch and Lignocellulosic Feedstocks Revised written by and published by . This book was released on 2005 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis of the feasibility of co-locating corn-grain-to-ethanol and lignocellulosic ethanol plants and potential savings from combining utilities, ethanol purification, product processing, and fermentation. Although none of the scenarios identified could produce ethanol at lower cost than a straight grain ethanol plant, several were lower cost than a straight cellulosic ethanol plant.
Download or read book Long run Effects of Falling Cellulosic Ethanol Production Costs on the US Agricultural Economy written by and published by . This book was released on 2010 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: Renewable energy production has been expanding at a rapid pace. New advances in cellulosic ethanol technologies have the potential to displace the use of petroleum as a transportation fuel, and could have significant effects on both the agricultural economy and the environment. In this letter, the effects of falling cellulosic ethanol production costs on the mix of ethanol feedstocks employed and on the US agricultural economy are examined. Results indicate that, as expected, cellulosic ethanol production increases by a substantial amount as conversion technology improves. Corn production increases initially following the introduction of cellulosic technology, because producers enjoy new revenue from sales of corn stover. After cellulosic ethanol production becomes substantially cheaper, however, acres are shifted from corn production to all other agricultural commodities. Essentially, this new technology could facilitate the exploitation of a previously under-employed resource (corn stover), resulting in an improvement in overall welfare. Thus in the most optimistic scenario considered, 68% of US ethanol is derived from cellulosic sources, coarse grain production is reduced by about 2%, and the prices of all food commodities are reduced modestly.
Download or read book Pretreatment of Biomass written by Ashok Pandey and published by Academic Press. This book was released on 2014-09-18 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pretreatment of Biomass provides general information, basic data, and knowledge on one of the most promising renewable energy sources—biomass for their pretreatment—which is one of the most essential and critical aspects of biomass-based processes development. The quest to make the environment greener, less polluted, and less hazardous has led to the concept of biorefineries for developing bio-based processes and products using biomass as a feedstock. Each kind of biomass requires some kind of pretreatment to make it suitable for bioprocess. This book provides state-of-art information on the methods currently available for this. This book provides data-based scientific information on the most advanced and innovative pretreatment of lignocellulosic and algal biomass for further processing. Pretreatment of biomass is considered one of the most expensive steps in the overall processing in a biomass-to-biofuel program. With the strong advancement in developing lignocellulose biomass- and algal biomass-based biorefineries, global focus has been on developing pretreatment methods and technologies that are technically and economically feasible. This book provides a comprehensive overview of the latest developments in methods used for the pretreatment of biomass. An entire section is devoted to the methods and technologies of algal biomass due to the increasing global attention of its use. - Provides information on the most advanced and innovative pretreatament processes and technologies for biomass - Covers information on lignocellulosic and algal biomass to work on the principles of biorefinery - Useful for researchers intending to study scale-up - Provides information on integration of processes and technologies for the pretreatment of biomass
Download or read book The Economic Feasibility of Converting Ligno cellulosic Feedstocks to Ethanol and Higher Value Chemicals written by Donald L. Van Dyne and published by . This book was released on 1999 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Economic Feasibility of Ethanol Production from Sweet Sorghum Juice in Texas written by Brittany Danielle Morris and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental and political concerns centered on energy use from gasoline have led to a great deal of research on ethanol production. The goal of this thesis is to determine if it is profitable to produce ethanol in Texas using sweet sorghum juice. Four different areas, Moore, Hill, Willacy, and Wharton Counties, using two feedstock alternatives, sweet sorghum only and sweet sorghum and corn, will be analyzed using Monte Carlo simulation to determine the probability of economic success. Economic returns to the farmers in the form of a contract price for the average sweet sorghum yield per acre in each study area and to the ethanol plant buying sweet sorghum at the contract price will be simulated and ranked. The calculated sweet sorghum contract prices offered to farmers are $9.94, $11.44, $29.98, and $36.21 per ton in Wharton, Willacy, Moore, and Hill Counties, respectively. The contract prices are equal to the next most profitable crop returns or ten percent more than the total cost to produce sweet sorghum in the study area. The wide variation in the price is due to competing crop returns and the sweet sorghum growing season. Ethanol production using sweet sorghum and corn is the most profitable alternative analyzed for an ethanol plant. A Moore County ethanol plant has the highest average net present value of $492.39 million and is most preferred overall when using sweet sorghum and corn to produce ethanol. Sweet sorghum ethanol production is most profitable in Willacy County but is not economically successful with an average net present value of $-11.06 million. Ethanol production in Hill County is least preferred with an average net present value of $-712.00 and $48.40 million when using sweet sorghum only and sweet sorghum and corn, respectively. Producing unsubsidized ethanol from sweet sorghum juice alone is not profitable in Texas. Sweet sorghum ethanol supplemented by grain is more economical but would not be as profitable as producing ethanol from only grain in the Texas Panhandle. Farmers profit on average from contract prices for sweet sorghum when prices cover total production costs for the crop.
Download or read book Lignocellulosic Biomass to Ethanol Process Design and Economics Utilizing Co current Dilute Acid Prehydrolysis and Enzymatic Hydrolysis Current and Future Scenarios written by and published by . This book was released on 1999 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The National Renewable Energy Laboratory (NREL) has undertaken a complete review and update of the process design and economic model for the biomass-to-ethanol enzymatic based process. The process design includes the core technologies being researched by the U.S. Department of Energy (DOE): prehydrolysis, simultaneous saccharification and co-fermentation, and cellulase enzyme production. Inaddition, all ancillary areas--feed handling, product recovery and purification, wastewater treatment lignin burner and boiler-turbogenerator, and utilities--are included. NREL engaged Delta-T Corporation to assist in the process design evaluation, equipment costing and overal plant integration. The process design and costing for the lignin burner and boiler turbogenerator has been reviewed byReaction Engineering, Inc. and the wastewater treatment by Merrick & Company. An overview of both reviews is included here. The purpose of this update was to ensure that the process design and equipment costs were reasonable and consistent with good engineering practice for plants of this type using available technical data. This work has resulted in an economic model that can be used to predictthe cost of producing ethanol from cellulosic biomass using this technology if a plant were to be built in the next few years. The model was also extended using technology improvements that are expected to be developed based on the current DOE research plan. Future process designs and cost estimates are given for the year 2005, 2010, 2015.
