Download or read book General Catalogue of Printed Books written by British Museum. Department of Printed Books and published by . This book was released on 1962 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Dissociation of Electrolytes in Non aqueous Solvents as Determined by the Conductivity and Boiling point Methods written by Henry Royer Kreider and published by . This book was released on 1911 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book General Catalogue of Printed Books to 1955 written by British Museum. Dept. of Printed Books and published by . This book was released on 1967 with total page 1290 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrochemistry in Nonaqueous Solutions written by Kōsuke Izutsu and published by Wiley-VCH. This book was released on 2002-05-06 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonaqueous solutions are equally indispensable to electrochemistry. Here, Kosuke Izutsu brilliantly illustrates the numerous aspects of this fascinating topic, whether the focus be on physicochemical processes or analytical methods. The author discusses solvation and solvent effects emphasizing dynamic aspects, important reactions including ionic and supercritical media, as well as advanced techniques in polarography and voltammetry. Throughout, he effortlessly manages to provide a comprehensive overview while also presenting the very latest developments. A number of example applications further enhance the practical value of this book and give it the feel of a reference work. Written for both users and specialists this volume represents a wealth of vital information and belongs on every bookshelf.
Download or read book Titration in Non aqueous Media written by István Gyenes and published by . This book was released on 1967 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Molten Salt Technology written by David G. Lovering and published by Springer. This book was released on 2014-11-14 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemistry in Non Aqueous Solvents written by B. Trémillon and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Arising no doubt from its pre-eminence as a natural liquid, water has always been considered by chemists as the original solvent in which very varied chemical reactions can take place, both for preparational and for analytical purposes. This explains the very long-standing interest shown in the study of aqueous solutions. In this con nection, it must be stressed that the theory of Arrhenius and Ostwald (1887-1894) on electrolytic dissociation, was originally devised solely for solutions in water and that the first true concept of acidity resulting from this is linked to the use of this solvent. The more recent development of numerous physico-chemical measurement methods has made possible an increase of knowledge in this area up to an extremely advanced degree of systematization. Thus today we have available both a very large amount of experimental data, together with very refined methods of deduction and of quantitative treatment of chemical reactions in solution which enable us to make the fullest use of this data. Nevertheless, . it appears quite evident at present that there are numerous chemical processes which cannot take place in water, and that its use as a solvent imposes 2 INTRODUCTION limitations. In order to overcome these limitations, it was natural that interest should be attracted to solvents other than water and that the new possibilities thus opened up should be explored.
Download or read book Electrolytes for Lithium and Lithium Ion Batteries written by T. Richard Jow and published by Springer. This book was released on 2014-05-06 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrolytes for Lithium and Lithium-ion Batteries provides a comprehensive overview of the scientific understanding and technological development of electrolyte materials in the last several years. This book covers key electrolytes such as LiPF6 salt in mixed-carbonate solvents with additives for the state-of-the-art Li-ion batteries as well as new electrolyte materials developed recently that lay the foundation for future advances. This book also reviews the characterization of electrolyte materials for their transport properties, structures, phase relationships, stabilities, and impurities. The book discusses in-depth the electrode-electrolyte interactions and interphasial chemistries that are key for the successful use of the electrolyte in practical devices. The Quantum Mechanical and Molecular Dynamical calculations that has proved to be so powerful in understanding and predicating behavior and properties of materials is also reviewed in this book. Electrolytes for Lithium and Lithium-ion Batteries is ideal for electrochemists, engineers, researchers interested in energy science and technology, material scientists, and physicists working on energy.
Download or read book Intermolecular and Surface Forces written by Jacob N. Israelachvili and published by Academic Press. This book was released on 2011-07-22 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intermolecular and Surface Forces describes the role of various intermolecular and interparticle forces in determining the properties of simple systems such as gases, liquids and solids, with a special focus on more complex colloidal, polymeric and biological systems. The book provides a thorough foundation in theories and concepts of intermolecular forces, allowing researchers and students to recognize which forces are important in any particular system, as well as how to control these forces. This third edition is expanded into three sections and contains five new chapters over the previous edition. - Starts from the basics and builds up to more complex systems - Covers all aspects of intermolecular and interparticle forces both at the fundamental and applied levels - Multidisciplinary approach: bringing together and unifying phenomena from different fields - This new edition has an expanded Part III and new chapters on non-equilibrium (dynamic) interactions, and tribology (friction forces)
Download or read book Alkaline Earth Hydroxides in Water and Aqueous Solutions written by I. Lambert and published by Elsevier. This book was released on 2013-10-22 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains evaluated data on the solubility of beryllium hydroxide, magnesium hydroxide, calcium hydroxide, strontium hydroxide and barium hydroxide in water and in a number of electrolyte and nonelectrolyte solutions in water. The alkaline earth hydroxides can be divided into two groups depending on the hydration of the solid. First, the sparingly soluble anhydrous beryllium, magnesium and calcium hydroxides, whose freshly precipitated solids are poorly crystalline and show decreasing solubility with aging, and whose solubility in water decreases with increasing temperature. Second, the soluble strontium and barium hydroxide octahydrates that form crystalline precipitates which do not show changes in solubility on aging, and whose solubility in water increases with increasing temperature.
Download or read book Screen Printing Technology for Energy Devices written by Andreas Willfahrt and published by Linköping University Electronic Press. This book was released on 2019-03-05 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technical application of screen and stencil printing has been state of the art for decades. As part of the subtractive production process of printed circuit boards, for instance, screen and stencil printing play an important role. With the end of the 20th century, another field has opened up with organic electronics. Since then, more and more functional layers have been produced using printing methods. Printed electronics devices offer properties that give almost every freedom to the creativity of product development. Flexibility, low weight, use of non-toxic materials, simple disposal and an enormous number of units due to the production process are some of the prominent keywords associated with this field. Screen printing is a widely used process in printed electronics, as this process is very flexible with regard to the materials that can be used. In addition, a minimum resolution of approximately 30 µm is sufficiently high. The ink film thickness, which can be controlled over a wide range, is an extremely important advantage of the process. Depending on the viscosity, layer thicknesses of several hundred nanometres up to several hundred micrometres can be realised. The conversion and storage of energy became an increasingly important topic in recent years. Since regenerative energy sources, such as photovoltaics or wind energy, often supply energy intermittently, appropriate storage systems must be available. This applies to large installations for the power supply of society, but also in the context of autarkic sensors, such as those used in the Internet of Things or domestic/industrial automation. A combination of micro-energy converters and energy storage devices is an adequate concept for providing energy for such applications. In this thesis the above mentioned keywords are addressed and the feasibility of printed thermoelectric energy converters and supercapacitors as energy storage devices are investigated. The efficiency of thermoelectric generators (TEG) is low, but in industrial environments, for example, a large amount of unused low temperature heat energy can be found. If the production costs of TEGs are low, conversion of this unused heat energy can contribute to increasing system efficiency. Additionally, printing of supercapacitor energy storage devices increases the usability of the TEG. It is appropriate to use both components as complementary parts in an energy system. Den tekniska tillämpningen av skärm- och stencilutskrift har varit toppmoderna i årtionden. Som en del av den subtraktiva produktionsprocessen av tryckta kretskort spelar exempelvis skärm- och stencilutskrift en viktig roll. I slutet av 1900-talet har ett annat fält öppnat med organisk elektronik. Sedan dess har allt fler funktionella lager producerats med hjälp av tryckmetoder. Tryckta elektronikanordningar erbjuder egenskaper som ger nästan all frihet till kreativiteten i produktutvecklingen. Flexibilitet, låg vikt, användning av giftfria material, enkelt bortskaffande och ett enormt antal enheter på grund av produktionsprocessen är några av de framträdande nyckelord som hör till detta område. Skärmtryck är en allmänt använd process i tryckt elektronik, eftersom processen är mycket flexibel med avseende på material som kan användas. Dessutom är en minsta upplösning på cirka 30 µm tillräckligt bra. Bläckfilmens tjocklek, som kan styras över ett brett område, är en extremt viktig fördel med processen. Beroende på viskositeten kan skikttjockleken på flera hundra nanometer upp till flera hundra mikrometer realiseras. Energikonvertering och lagring har blivit ett allt viktigare ämne de senaste åren. Eftersom regenerativa energikällor, såsom fotovoltaik eller vindkraft, ofta levererar energi intermittent, måste lämpliga lagringssystem vara tillgängliga. Detta gäller stora installationer för samhällets strömförsörjning, men också inom ramen för autarkiska sensorer, som de som används i saker av saker eller inhemsk / industriell automation. En kombination av mikroenergiomvandlare och energilagringsenheter är ett lämpligt koncept för att tillhandahålla energi för sådana applikationer. I denna avhandling behandlas ovan nämnda nyckelord. Genomförbarhet av tryckta termoelektriska energiomvandlare och superkapacitorer som energilagringsenheter undersöks. Effektiviteten hos termoelektriska generatorer (TEG) är låg, men i industriella miljöer kan exempelvis en stor mängd oanvänd låg temperatur värmeenergi hittas. Om produktionskostnaderna för TEG är låga kan konvertering av denna oanvända värmeenergi bidra till ökad systemeffektivitet. Dessutom ökar utskrift av superkapacitorer användbarheten hos TEG. Det är lämpligt att använda båda komponenterna.
Download or read book Fundamentals of Ionic Liquids written by Douglas R. MacFarlane and published by John Wiley & Sons. This book was released on 2017-12-04 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by experts who have been part of this field since its beginnings in both research and academia, this textbook introduces readers to this evolving topic and the broad range of applications that are being explored. The book begins by examining what it is that defines ionic liquids and what sets them apart from other materials. Chapters describe the various types of ionic liquids and the different techniques used to synthesize them, as well as their properties and some of the methods used in their measurement. Further chapters delve into synthetic and electrochemical applications and their broad use as "Green" solvents. Final chapters examine important applications in a wide variety of contexts, including such devices as solar cells and batteries, electrochemistry, and biotechnology. The result is a must-have resource for any researcher beginning to work in this growing field, including senior undergraduates and postgraduates.
Download or read book DOE ET written by and published by . This book was released on 1980 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vehicle Propulsion Systems written by Lino Guzzella and published by Springer Science & Business Media. This book was released on 2007-09-21 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors of this text have written a comprehensive introduction to the modeling and optimization problems encountered when designing new propulsion systems for passenger cars. It is intended for persons interested in the analysis and optimization of vehicle propulsion systems. Its focus is on the control-oriented mathematical description of the physical processes and on the model-based optimization of the system structure and of the supervisory control algorithms.
Download or read book Solvent Extraction written by Vladimir S Kislik and published by Elsevier. This book was released on 2011-11-04 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main challenge in modern solvent extraction separation is that most techniques are mainly empirical, specific and particular for narrow fields of practice and require a large degree of experimentation. This concise and modern book provides a complete overview of both solvent extraction separation techniques and the novel and unified competitive complexation/solvation theory. This novel and unified technique presented in the book provides a key for a preliminary quantitative prediction of suitable extraction systems without experimentation, thus saving researchers time and resources. Analyzes and compares both classical and new competitive models and techniques Offers a novel and unified competitive complexation / solvation theory that permits researchers to standardize some parameters, which decreases the need for experimentation at R&D Presents examples of applications in multiple disciplines such as chemical, biochemical, radiochemical, pharmaceutical and analytical separation Written by an outstanding scientist who is prolific in the field of separation science
Download or read book Advances in Lithium Ion Batteries written by Walter van Schalkwijk and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the decade since the introduction of the first commercial lithium-ion battery research and development on virtually every aspect of the chemistry and engineering of these systems has proceeded at unprecedented levels. This book is a snapshot of the state-of-the-art and where the work is going in the near future. The book is intended not only for researchers, but also for engineers and users of lithium-ion batteries which are found in virtually every type of portable electronic product.
Download or read book Aulton s Pharmaceutics written by Michael E. Aulton and published by Elsevier Health Sciences. This book was released on 2013 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Pharmaceutics is the art of pharmaceutical preparations. It encompasses design of drugs, their manufacture and the elimination of micro-organisms from the products. This book encompasses all of these areas."--Provided by publisher.
