Download or read book The Development of the Dynamic Mechanical Analyzer DMA Calibraton and Testing Procedures written by Matthew S.. Opliger and published by . This book was released on 2013 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic mechanical analysis (DMA) is the most preferred thermal analysis technique for determining the glass transition temperature (Tg) of polymer matrix composites because it is more sensitive to Tg measurements than other thermal analysis techniques. An interlaboratory study was developed and conducted by the American Society for Testing and Materials (ASTM) for its D7028-07 test standard (Tg by DMA). The results of the study indicated that reproducibility was poor between DMA instruments and laboratories. A reproducibility standard deviation of 15.09 degree F and 14.72 degree F for dry Tg and wet Tg measurements, respectively, was found. Poor reproducibility of Tg measurements creates uncertainty in cases where Tg measurements are utilized. Service temperature and process control determinations may be difficult to establish if reproducibility of Tg measurements remains poor. The goal of this research was to improve laboratory-to-laboratory and instrument-to-instrument reproducibility. To accomplish this, several potential influencers of Tg measurements, such as, thermocouple positioning, dimensional variation of specimens, and temperature calibration configurations and methods were evaluated. These evaluations were the framework to the development of thermocouple guidelines and temperature calibration procedures to aid test operators in areas where the test and calibration standards are not specific. To assess whether this goal was achieved, a follow-on interlaboratory study was conducted. A reproducibility standard deviation of 7.86 degree F and 7.30 degree F for dry Tg and wet Tg measurements, respectively, was determined. When compared with the interlaboratory study conducted by ASTM, the follow-on interlaboratory study indicated a 50% improvement in the reproducibility of Tg measurements was achieved with the implementation of the developed thermocouple guidelines and temperature calibration procedures.

Download or read book Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers written by American Society for Testing and Materials. Committee E37 on Thermal Measurement and published by . This book was released on 2003 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers Using Thermal Lag written by and published by . This book was released on with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Departments of Transportation and Housing and Urban Development and Related Agencies Appropriations for 2014 written by United States. Congress. House. Committee on Appropriations. Subcommittee on Transportation, Housing and Urban Development, and Related Agencies and published by . This book was released on 2013 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers written by and published by . This book was released on with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Dynamic Mechanical Analysis written by Kevin P. Menard and published by CRC Press. This book was released on 2020-05-04 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Mechanical Analysis (DMA) is a powerful technique for understanding the viscoelastic properties of materials. It has become a powerful tool for chemists, polymer and material scientists, and engineers. Despite this, it often remains underutilized in the modern laboratory. Because of its high sensitivity to the presence of the glass transition, many users limit it to detecting glass transitions that can’t be seen by differential scanning calorimetry (DSC). This book presents a practical and straightforward approach to understanding how DMA works and what it measures. Starting with the concepts of stress and strain, the text takes the reader through stress–strain, creep, and thermomechanical analysis. DMA is discussed as both the instrument and fixtures as well as the techniques for measuring both thermoplastic and thermosetting behavior. This edition offers expanded chapters on these areas as well as frequency scanning and other application areas. To help the reader grasp the material, study questions have also been added. Endnotes have been expanded and updated. Features Reflects the latest DMA research and technical advances Includes case studies to demonstrate the use of DMA over a range of industrial problems Includes numerous references to help those with limited materials engineering background Demonstrates the power of DMA as a laboratory tool for analysis and testing

Download or read book Dynamic Mechanical Analysis written by Kevin P. Menard and published by CRC Press. This book was released on 2008-05-28 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic mechanical analysis (DMA) has left the domain of the rheologist and has become a prevalent tool in the analytical laboratory. However, information on the use of this important tool is still scattered among a range of books and articles. Novices in the field have to dig through thermal analysis, rheology, and materials texts just to find the

Download or read book Assignment of the Glass Transition written by Rickey J. Seyler and published by ASTM International. This book was released on 1994 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Principles and Applications of Thermal Analysis written by Paul Gabbott and published by John Wiley & Sons. This book was released on 2008-04-30 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Analysis techniques are used in a wide range of disciplines, from pharmacy and foods to polymer science, materials and glasses; in fact any field where changes in sample behaviour are observed under controlled heating or controlled cooling conditions. The wide range of measurements possible provide fundamental information on the material properties of the system under test, so thermal analysis has found increasing use both in basic characterisation of materials and in a wide range of applications in research, development and quality control in industry and academia. Principles and Applications of Thermal Analysis is written by manufacturers and experienced users of thermal techniques. It provides the reader with sound practical instruction on how to use the techniques and gives an up to date account of the principle industrial applications. By covering basic thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) including the new approach of Fast Scanning DSC, together with dynamic mechanical analysis (DMA /TMA) methods, then developing the discussion to encompass industrial applications, the book serves as an ideal introduction to the technology for new users. With a strong focus on practical issues and relating the measurements to the physical behaviour of the materials under test, the book will also serve as an important reference for experienced analysts.

Download or read book Annual Book of ASTM Standards written by ASTM International and published by . This book was released on 2004 with total page 1106 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Thermal Analysis of Plastics written by Gottfried W. Ehrenstein and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2012-11-12 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal analysis has proven to be one of the most important and meaningful test methods in the plastics industry and in testing laboratories. Although thermal analysis is used for fundamental studies related to materials science of polymers, its power lies in understanding this behavior during manufacturing processes. This understanding aids in process optimization, reduction of manufacturing cycle times, failure analysis as well as overall improvement of the material properties of the finished product, to name a few. In this book, the different test methods and their variations are described in detail, emphasizing the principles and their application in practice. Using practical examples, different approaches to problem solving are presented with a focus on the interpretation of the experimental results. Thermal analysis provides information on important properties of plastic materials, such as nucleation, crystallization, degree of crystallinity, recrystallization, melting and solidification, glass transition, curing and postcuring, thermal stability, thermal expansion, relaxation of orientation and internal stresses, pvT-data, and others. This book is a must for everybody involved in material and product development, testing, processing, quality assurance, or failure analysis in industry and laboratories. Contents: - Differential Scanning Calorimetry (DSC) - Oxidative Induction Time/Temperature (OIT) - Thermogravimetry (TG) - Thermo-Mechanical Analysis (TMA) - pvT-Measurements - Dynamic-Mechanical Analysis (DMA) - Micro-Thermal Analysis - Brief Characterization of Key Polymers

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.

Download or read book Handbook of Thermal Analysis and Calorimetry written by and published by Elsevier. This book was released on 2018-03-12 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Thermal Analysis and Calorimetry: Recent Advances, Techniques and Applications, Volume Six, Second Edition, presents the latest in a series that has been well received by the thermal analysis and calorimetry community. This volume covers recent advances in techniques and applications that complement the earlier volumes. There has been tremendous progress in the field in recent years, and this book puts together the most high-impact topics selected for their popularity by new editors Sergey Vyazovkin, Nobuyoshi Koga and Christoph Schick—all editors of Thermochimica Acta. Among the important new techniques covered are biomass conversion; sustainable polymers; polymer nanocompsoties; nonmetallic glasses; phase change materials; propellants and explosives; applications to pharmaceuticals; processes in ceramics, metals, and alloys; ionic liquids; fast-scanning calorimetry, and more. Features 19 all-new chapters to bring readers up to date on the current status of the field Provides a broad overview of recent progress in the most popular techniques and applications Includes chapters authored by a recognized leader in each field and compiled by a new team of editors, each with at least 20 years of experience in the field of thermal analysis and calorimetry Enables applications across a wide range of modern materials, including polymers, metals, alloys, ceramics, energetics and pharmaceutics Overviews the current status of the field and summarizes recent progress in the most popular techniques and applications

Download or read book Viscoelastic Properties of Polymers written by John D. Ferry and published by John Wiley & Sons. This book was released on 1980-09-16 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: Viscoelastic behavior reflects the combined viscous and elastic responses, under mechanical stress, of materials which are intermediate between liquids and solids in character. Polymers the basic materials of the rubber and plastic industries and important to the textile, petroleum, automobile, paper, and pharmaceutical industries as well exhibit viscoelasticity to a pronounced degree. Their viscoelastic properties determine the mechanical performance of the final products of these industries, and also the success of processing methods at intermediate stages of production. Viscoelastic Properties of Polymers examines, in detail, the effects of the many variables on which the basic viscoelastic properties depend. These include temperature, pressure, and time; polymer chemical composition, molecular weight and weight distribution, branching and crystallinity; dilution with solvents or plasticizers; and mixture with other materials to form composite systems. With guidance by molecular theory, the dependence of viscoelastic properties on these variables can be simplified by introducing certain ancillary concepts such as the fractional free volume, the monomeric friction coefficient, and the spacing between entanglement loci, to provide a qualitative understanding and in many cases a quantitative prediction of how to achieve desired results. The phenomenological theory of viscoelasticity which permits interrelation of the results of different types of experiments is presented first, with many useful approximation procedures for calculations given. A wide variety of experimental methods is then described, with critical evaluation of their applicability to polymeric materials of different consistencies and in different regions of the time scale (or, for oscillating deformations, the frequency scale). A review of the present state of molecular theory follows, so that viscoelasticity can be related to the motions of flexible polymer molecules and their entanglements and network junctions. The dependence of viscoestic properties on temperature and pressure, and its descriptions using reduced variables, are discussed in detail. Several chapters are then devoted to the dependence of viscoelastic properties on chemical composition, molecular weight, presence of diluents, and other features, for several characteristic classes of polymer materials. Finally, a few examples are given to illustrate the many potential applications of these principles to practical problems in the processing and use of rubbers, plastics, and fibers, and in the control of vibration and noise. The third edition has been brought up to date to reflect the important developments, in a decade of exceptionally active research, which have led to a wider use of polymers, and a wider recognition of the importance and range of application of viscoelastic properties. Additional data have been incorporated, and the book s chapters on dilute solutions, theory of undiluted polymers, plateau and terminal zones, cross-linked polymers, and concentrated solutions have been extensively rewritten to take into account new theories and new experimental results. Technical managers and research workers in the wide range of industries in which polymers play an important role will find that the book provides basic information for practical applications, and graduate students in chemistry and engineering will find, in its illustrations with real data and real numbers, an accessible introduction to the principles of viscoelasticity.

Download or read book Binder Characterization and Evaluation written by David A. Anderson and published by Strategic Highway Research Program (Shrp). This book was released on 1994 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Publications of the National Bureau of Standards Catalog written by United States. National Bureau of Standards and published by . This book was released on 1983 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Principles of Thermal Analysis and Calorimetry written by Simon Gaisford and published by Royal Society of Chemistry. This book was released on 2019-03-15 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of thermal and calorimetric methods has shown rapid growth over the past few decades, in an increasingly wide range of applications. The original text was published in 2001; since then there have been significant advances in various analytical techniques and their applications. This second edition supplies an up to date, concise and readable account of the principles, experimental apparatus and practical procedures used in thermal analysis and calorimetric methods of analysis. Written by experts in their field, brief accounts of the basic theory are reinforced with detailed technical advances and contemporary developments. Where appropriate, applications are used to highlight particular operating principles or methods of interpretation. As an important source of information for many levels of readership in a variety of areas, this book will be an aid for students and lecturers through to industrial and laboratory staff and consultants.