Download or read book The Development of CO2 switchable Technologies for Separation of Organic Compounds written by Sean M. Mercer and published by . This book was released on 2012 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing environmental impact of society has created the need for the modification of current and the implementation of new industrial processes which are less environmentally harmful. However, these new or modified processes must be less material-, time-, and cost-intensive such that they are more economically beneficial than the processes they are to supplant. The described research was inspired by these two ideas and is comprised of two projects, both focused on the creation of recyclable, CO2-switchable methods of separating organic compounds. The development and optimization of switchable water, a CO2-switchable ionic strength aqueous solvent is described. The solvent system, an amine/aqueous mixture, had the ability to switch from low to high ionic strength via the application and removal of CO2. This solvent system was able to achieve salting-out of water-miscible organics in comparable amounts to several inorganic salts typically used for salting-out. The switchable water system was explored for use in several industrial applications. A homogeneous catalysis recycling system was developed for the hydroformylation of styrene. A catalyst was able to be recovered and recycled five times with minimal loss of activity. The use of switchable water to expedite the settling of clay suspensions was also explored. Switchable water, when used as process water did not settle bulk clay solids as quickly as a CO2-only treatment, but did however increase the settling rate of small clay fines resulting in lower turbidities of the supernatant. The solvent could be recovered from settled clay suspensions and recycled up to three times. Finally, efforts towards the realization of CO2-switchable chiral resolving agents are presented. It is hypothesized that chiral nitrogenous bases could be used as switchable resolving agents by forming diastereomeric salt pairs with racemic alcohols via the application of CO2. After separation of the diastereomers, removal of CO2 would afford the resolved alcohol enantiomers and the chiral base. Efforts towards the synthesis of a library of chiral nitrogenous bases and the screening of their reactivity with CO2-treated alcohols are described. Several bases were generated, but the necessary reactivity between the bases and the racemic alcohols in the presence of CO2 was not observed.

Download or read book CO2 switchable Materials written by Philip G Jessop and published by Royal Society of Chemistry. This book was released on 2020-09-11 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: CO2-responsive materials are a relatively recent innovation. In general, stimuli-responsive materials exhibit reversible changes in their physical or chemical properties in response to external triggers such as temperature, pH, light, or voltage. However, there are often limitations in applying these triggers including economic and environmental costs, and product contamination. The realization that CO2 can be used as an effective trigger for stimulating changes in material properties has prompted a surge in interest in this area within the past few years, with numerous new studies currently underway in several countries. CO2 is an ideal trigger for switchable or stimuli-responsive materials because it is benign, inexpensive, green, abundant, and does not accumulate in the system. Many different CO2-responsive materials including polymers, latexes, solvents, solutes, gels, surfactants, and catalysts have been prepared. Summarizing recent progress in the preparation, self-assembly, and functional applications of CO2-responsive materials, this book explores the physical chemistry of CO2-switching, including constraints on structural design and process conditions, together with applications. With emphasis on the environmental, health, and safety advantages and disadvantages compared to conventional materials, it is ideal for researchers and industrialists working in green chemistry, chemical engineering, and polymer chemistry.

Download or read book Advances in Carbon Capture written by Mohammad Reza Rahimpour and published by Woodhead Publishing. This book was released on 2020-08-04 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Carbon Capture reviews major implementations of CO2 capture, including absorption, adsorption, permeation and biological techniques. For each approach, key benefits and drawbacks of separation methods and technologies, perspectives on CO2 reuse and conversion, and pathways for future CO2 capture research are explored in depth. The work presents a comprehensive comparison of capture technologies. In addition, the alternatives for CO2 separation from various feeds are investigated based on process economics, flexibility, industrial aspects, purification level and environmental viewpoints. Explores key CO2 separation and compare technologies in terms of provable advantages and limitations Analyzes all critical CO2 capture methods in tandem with related technologies Introduces a panorama of various applications of CO2 capture

Download or read book Carbon Dioxide Recovery and Utilization written by M. Aresta and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Dioxide Recovery and Utilization is a complete and informative resource on the carbon dioxide sources and market at the European Union level, with reference to the world situation. The book covers the following themes: - Sources of carbon dioxide and their purity, - Market of carbon dioxide and its uses, - Separation techniques of carbon dioxide from flue gases, - Analysis of the potential of each technique and application, - Basic science and technology of supercritical CO2, - Reactions in supercritical CO2 and its use as reactive solvent, - Utilization of CO2 in the synthesis of chemicals with low energy input, - Conversion of CO2 into fuels: existing techniques, - Dry reforming of methane, - Assessment of the use of carbon dioxide for the synthesis of methanol. This book is unique in providing integrated information and a perspective on innovative technologies for the use of carbon dioxide. The book is suitable for use as a textbook for courses in chemical engineering and chemistry. It is also of great interest as a general reference for those involved with technologies for avoiding carbon dioxide production and for economists. This is an invaluable reference for specialists on synthetic chemistry, gas separation, supercritical fluids, carbon dioxide marketing, renewable energy and sustainable development. In addition, it will be useful for those working in the chemical industry and for policy makers for carbon dioxide mitigation, innovative technologies, carbon recycling, and power generation.

Download or read book Advanced CO2 Capture Technologies written by Shin-ichi Nakao and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarises the advanced CO2 capture technologies that can be used to reduce greenhouse gas emissions, especially those from large-scale sources, such as power-generation and steel-making plants. Focusing on the fundamental chemistry and chemical processes, as well as advanced technologies, including absorption and adsorption, it also discusses other aspects of the major CO2 capture methods: membrane separation; the basic chemistry and process for CO2 capture; the development of materials and processes; and practical applications, based on the authors R & D experience. This book serves as a valuable reference resource for researchers, teachers and students interested in CO2 problems, providing essential information on how to capture CO2 from various types of gases efficiently. It is also of interest to practitioners and academics, as it discusses the performance of the latest technologies applied in large-scale emission sources.

Download or read book Process Systems and Materials for CO2 Capture written by Athanasios I. Papadopoulos and published by John Wiley & Sons. This book was released on 2017-03-07 with total page 925 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive volume brings together an extensive collection of systematic computer-aided tools and methods developed in recent years for CO2 capture applications, and presents a structured and organized account of works from internationally acknowledged scientists and engineers, through: Modeling of materials and processes based on chemical and physical principles Design of materials and processes based on systematic optimization methods Utilization of advanced control and integration methods in process and plant-wide operations The tools and methods described are illustrated through case studies on materials such as solvents, adsorbents, and membranes, and on processes such as absorption / desorption, pressure and vacuum swing adsorption, membranes, oxycombustion, solid looping, etc. Process Systems and Materials for CO2 Capture: Modelling, Design, Control and Integration should become the essential introductory resource for researchers and industrial practitioners in the field of CO2 capture technology who wish to explore developments in computer-aided tools and methods. In addition, it aims to introduce CO2 capture technologies to process systems engineers working in the development of general computational tools and methods by highlighting opportunities for new developments to address the needs and challenges in CO2 capture technologies.

Download or read book Metal Organic Framework Materials written by Leonard R. MacGillivray and published by John Wiley & Sons. This book was released on 2014-09-19 with total page 1210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal-Organic Frameworks (MOFs) are crystalline compounds consisting of rigid organic molecules held together and organized by metal ions or clusters. Special interests in these materials arise from the fact that many are highly porous and can be used for storage of small molecules, for example H2 or CO2. Consequently, the materials are ideal candidates for a wide range of applications including gas storage, separation technologies and catalysis. Potential applications include the storage of hydrogen for fuel-cell cars, and the removal and storage of carbon dioxide in sustainable technical processes. MOFs offer the inorganic chemist and materials scientist a wide range of new synthetic possibilities and open the doors to new and exciting basic research. Metal-Organic Frameworks Materials provides a solid basis for the understanding of MOFs and insights into new inorganic materials structures and properties. The volume also reflects progress that has been made in recent years, presenting a wide range of new applications including state-of-the art developments in the promising technology for alternative fuels. The comprehensive volume investigates structures, symmetry, supramolecular chemistry, surface engineering, recognition, properties, and reactions. The content from this book will be added online to the Encyclopedia of Inorganic and Bioinorganic Chemistry: http://www.wileyonlinelibrary.com/ref/eibc

Download or read book Green Sustainable Process for Chemical and Environmental Engineering and Science written by Inamuddin and published by Elsevier. This book was released on 2021-11-17 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Green Sustainable Process for Chemical and Environmental Engineering and Science: Switchable Solvents explores the preparation, properties, chemical processes and applications of this class of green solvents. The book provides an in-depth overview on the area of switchable solvents in various industrial applications, focusing on the purification and extraction of chemical compounds utilizing green chemistry protocols that include liquid-liquid, solid-liquid, liquid-gas and lipids separation technologies. In addition, it includes recent advances in greener extraction and separation processes. This book will be an invaluable guide to students, professors, scientists and R&D industrial specialists working in the field of sustainable chemistry, organic, analytical, chemical engineering, environmental and pharmaceutical sciences. Provides a broad overview of switchable solvents in sustainable chemical processes Compares the use of switchable solvents as greener solvents over conventional solvents Outlines eco-friendly organic synthesis and chemical processes using switchable solvents Lists various industrial separations/extraction processes using switchable solvents

Download or read book Encyclopedia of Sustainable Technologies written by Martin Abraham and published by Elsevier. This book was released on 2017-07-04 with total page 2276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encyclopedia of Sustainable Technologies, Eight Volume Set provides an authoritative assessment of the sustainable technologies that are currently available or in development. Sustainable technology includes the scientific understanding, development and application of a wide range of technologies and processes and their environmental implications. Systems and lifecycle analyses of energy systems, environmental management, agriculture, manufacturing and digital technologies provide a comprehensive method for understanding the full sustainability of processes. In addition, the development of clean processes through green chemistry and engineering techniques are also described. The book is the first multi-volume reference work to employ both Life Cycle Analysis (LCA) and Triple Bottom Line (TBL) approaches to assessing the wide range of technologies available and their impact upon the world. Both approaches are long established and widely recognized, playing a key role in the organizing principles of this valuable work. Provides readers with a one-stop guide to the most current research in the field Presents a grounding of the fundamentals of the field of sustainable technologies Written by international leaders in the field, offering comprehensive coverage of the field and a consistent, high-quality scientific standard Includes the Life Cycle Analysis and Triple Bottom Line approaches to help users understand and assess sustainable technologies

Download or read book The Separation and Recovery of Volatile Organic Compounds from Liquid Carbon Dioxide written by Carol Moll Krska and published by . This book was released on 1997 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy Efficient Solvents for CO2 Capture by Gas Liquid Absorption written by Wojciech M. Budzianowski and published by Springer. This book was released on 2016-12-01 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews and characterises promising single-compound solvents, solvent blends and advanced solvent systems suitable for CO2 capture applications using gas-liquid absorption. Focusing on energy efficient solvents with minimal adverse environmental impact, the contributions included analyse the major technological advantages, as well as research and development challenges of promising solvents and solvent systems in various sustainable CO2 capture applications. It provides a valuable source of information for undergraduate and postgraduate students, as well as for chemical engineers and energy specialists.

Download or read book Alternative Solvents for Green Chemistry written by Francesca Kerton and published by Royal Society of Chemistry. This book was released on 2015-11-09 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Everyone is becoming more environmentally conscious and therefore, chemical processes are being developed with their environmental burden in mind. This also means that more traditional chemical methods are being replaced with new innovations and this includes new solvents. Solvents are everywhere, but how necessary are they? They are used in most areas including synthetic chemistry, analytical chemistry, pharmaceutical production and processing, the food and flavour industry and the materials and coatings sectors. However, the principles of green chemistry guide us to use less of them, or to use safer, more environmentally friendly solvents if they are essential. Therefore, we should always ask ourselves, do we really need a solvent? Green chemistry, as a relatively new sub-discipline, is a rapidly growing field of research. Alternative solvents - including supercritical fluids and room temperature ionic liquids - form a significant portion of research in green chemistry. This is in part due to the hazards of many conventional solvents (e.g. toxicity and flammability) and the significant contribution that solvents make to the waste generated in many chemical processes. Solvents are important in analytical chemistry, product purification, extraction and separation technologies, and also in the modification of materials. Therefore, in order to make chemistry more sustainable in these fields, a knowledge of alternative, greener solvents is important. This book, which is part of a green chemistry series, uses examples that tie in with the 12 principles of green chemistry e.g. atom efficient reactions in benign solvents and processing of renewable chemicals/materials in green solvents. Readers get an overview of the many different kinds of solvents, written in such a way to make the book appropriate to newcomers to the field and prepare them for the 'green choices' available. The book also removes some of the mystique associated with 'alternative solvent' choices and includes information on solvents in different fields of chemistry such as analytical and materials chemistry in addition to catalysis and synthesis. The latest research developments, not covered elsewhere, are included such as switchable solvents and biosolvents. Also, some important areas that are often overlooked are described such as naturally sourced solvents (including ethanol and ethyl lactate) and liquid polymers (including poly(ethyleneglycol) and poly(dimethylsiloxane)). As well as these additional alternative solvents being included, the book takes a more general approach to solvents, not just focusing on the use of solvents in synthetic chemistry. Applications of solvents in areas such as analysis are overviewed in addition to the more widely recognised uses of alternative solvents in organic synthesis. Unfortunately, as the book shows, there is no universal green solvent and readers must ascertain their best options based on prior chemistry, cost, environmental benefits and other factors. It is important to try and minimize the number of solvent changes in a chemical process and therefore, the importance of solvents in product purification, extraction and separation technologies are highlighted. The book is aimed at newcomers to the field whether research students beginning investigations towards their thesis or industrial researchers curious to find out if an alternative solvent would be suitable in their work.

Download or read book Novel Membrane Technologies for Traditional Industrial Processes written by Pei Li and published by MDPI. This book was released on 2019-04-09 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Through reading this book, you will obtain information on: (1) the main problems in air separation and natural gas treatment by membrane separation and how to solve them; (2) processes involving membranes and new membrane materials for the more economical utilization of bio-resources; (3) energy selection and membrane development for more expedient and stable harnessing of the natural osmosis phenomenon; (4) many excellent contributions about catalytic membrane bioreactors; (5) how to fine-tune the arrangement of aquaporins (i.e., proteins identified in biological cells) to achieve superior water treatment efficiency.

Download or read book Handbook of Smart Materials Technologies and Devices written by Chaudhery Mustansar Hussain and published by Springer Nature. This book was released on 2022-11-09 with total page 2831 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook brings together technical expertise, conceptual background, applications, and societal aspects of Industry 4.0: the evolution of automation and data exchange in fabrication technologies, materials processing, and device manufacturing at both experimental and theoretical model scales. The book assembles all the aspects of Industry 4.0, starting from the emergence of the concept to the consequences of its progression. Drawing on expert contributors from around the world, the volume details the technologies that sparked the fourth revolution and illustrates their characteristics, potential, and methods of use in the industrial and societal domains. In addition, important topics such as ethics, privacy and security are considered in a reality where all data is shared and saved remotely. The collection of contribution serve a very broad audience working in the fields of science and engineering, chemical engineering, materials science, nanotechnology, energy, environment, green chemistry, sustainability, electrical and electronic engineering, solid-state physics, surface science, aerosol technology, chemistry, colloid science, device engineering, and computer technology. This handbook ideal reference libraries in universities and industrial institutions, government and independent institutes, individual research groups and scientists.

Download or read book Encyclopedia of Renewable Energy Sustainability and the Environment written by and published by Elsevier. This book was released on 2024-10-01 with total page 4061 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encyclopedia of Renewable Energy, Sustainability and the Environment, Four Volume Set comprehensively covers all renewable energy resources, including wind, solar, hydro, biomass, geothermal energy, and nuclear power, to name a few. In addition to covering the breadth of renewable energy resources at a fundamental level, this encyclopedia delves into the utilization and ideal applications of each resource and assesses them from environmental, economic, and policy standpoints. This book will serve as an ideal introduction to any renewable energy source for students, while also allowing them to learn about a topic in more depth and explore related topics, all in a single resource. Instructors, researchers, and industry professionals will also benefit from this comprehensive reference. Covers all renewable energy technologies in one comprehensive resource“/li> Details renewable energies’ processes, from production to utilization in a single encyclopedia Organizes topics into concise, consistently formatted chapters, perfect for readers who are new to the field Assesses economic challenges faced to implement each type of renewable energy Addresses the challenges of replacing fossil fuels with renewables and covers the environmental impacts of each renewable energy

Download or read book Ionic Liquid Based Technologies for Environmental Sustainability written by Mohammad Jawaid and published by Elsevier. This book was released on 2021-12-04 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ionic Liquid-based Technologies for Environmental Sustainability explores the range of sustainable and green applications of IL materials achieved in recent years, such as gas solubility, biomass pre-treatment, bio-catalysis, energy storage, gas separation and purification technologies. The book also provides a reference material for future research in IL-based technologies for environmental and energy applications, which are much in-demand due to sustainable, reusable and eco-friendly methods for highly innovative and applied materials. Written by eminent scholars and leading experts from around the world, the book aims to cover the synthesis and characterization of broad range of ionic liquids and their sustainable applications. Chapters provide cutting-edge research with state-of-the-art developments, including the use of IL-based materials for the removal of pharmaceuticals, dyes and value-added metals. Describes the fundamentals and major applications of ionic liquid materials Covers up-to-date developments in novel applications of IL materials Provides practical tips to aid researchers who work on ionic liquid applications

Download or read book Introduction To Carbon Capture And Sequestration written by Berend Smit and published by World Scientific. This book was released on 2014-01-10 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the book is to provide an understanding of the current science underpinning Carbon Capture and Sequestration (CCS) and to provide students and interested researchers with sufficient background on the basics of Chemical Engineering, Material Science, and Geology that they can understand the current state of the art of the research in the field of CCS. In addition, the book provides a comprehensive discussion of the impact of CCS on the energy landscape, society, and climate as these topics govern the success of the science being done in this field.The book is aimed at undergraduate students, graduate students, scientists, and professionals who would like to gain a broad multidisciplinary view of the research that is being carried out to solve one of greatest challenges of our generation.