Download or read book The Deformation Characteristics and Microstructural Dynamics of an AL 10MG 0 1ZR Alloy written by and published by . This book was released on 1992 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt: An investigation into microstructural evolution during processing and superplastic deformation of an Al-10Mg-0.1Zr alloy was conducted. Processing schedules were modified to enhance particle-stimulated nucleation of recrystallization and refine subsequent gain size. Strain rates varying over three orders of magnitude were utilized in subsequent testing of processed material. At lower strain rates of about 10-4 sec-1 coarsening of the microstructure was apparent and elongations of 277% were obtained. A strain rate of 10-3 sec-1 resulted in lesser coarsening and elongations of 650%. A model of deformation by grain boundary sliding in association with microstructural coarsening is presented.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1986 with total page 1160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microstructural Characteristics and Dynamic Recrystallization Behavior of TiAl Based Alloy During High Temperature Deformation written by and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical and Microstructural Characteristics of an Al Li Cu Zr Alloy During Superplastic Deformation written by Binyan Ren and published by . This book was released on 1991 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physics Briefs written by and published by . This book was released on 1994 with total page 1256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydrogen in Intermetallic Compounds II written by Louis Schlapbach and published by Springer Science & Business Media. This book was released on 2006-01-21 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of hydrogen in an on metals and alloys is important in a number ofdisciplines including solid-state physics, materials science, physical chemistry, and energy technology. This volume treats the dynamics of hydrogen in intermetallic compounds, surface properties, kinetics, and applications of metal hydrides in energy technology. In addition, selected experimental methods are described. The introductory chapter will enable non-specialists to gain an overall picture of the field and to appreciate the relevant scientific issue. The companion volume, Hydrogene in Intermetallic Compounds I, was published as Vol. 63 of Topics in Applied Physics.
Download or read book Magnesium Biomaterials written by Nicholas Travis Kirkland and published by Springer Science & Business Media. This book was released on 2013-10-12 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium Biomaterials provides a succinct up-to-date overview of Magnesium biomaterial development, critically examines the types of in vitro experiments that may be performed, and investigates the numerous variables that affect Magnesium biodegradation when undertaking these experiments. This work also discusses the direction in which current Magnesium biomaterial development is heading and the necessary steps for future development of this field. Information is drawn from numerous multi-disciplinary sources to provide a coherent and critical overview. Magnesium Biomaterials is ideal for researchers in the area of bio-Mg, companies interested in exploring their own alloys, and for researchers working with other biodegradable materials who are seeking a cross-platform understanding of material performance.
Download or read book Principles of Corrosion Engineering and Corrosion Control written by Zaki Ahmad and published by Elsevier. This book was released on 2006-09-18 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion is a huge issue for materials, mechanical, civil and petrochemical engineers. With comprehensive coverage of the principles of corrosion engineering, this book is a one-stop text and reference for students and practicing corrosion engineers. Highly illustrated, with worked examples and definitions, it covers basic corrosion principles, and more advanced information for postgraduate students and professionals. Basic principles of electrochemistry and chemical thermodynamics are incorporated to make the book accessible for students and engineers who do not have prior knowledge of this area. Each form of corrosion covered in the book has a definition, description, mechanism, examples and preventative methods. Case histories of failure are cited for each form. End of chapter questions are accompanied by an online solutions manual.* Comprehensively covers the principles of corrosion engineering, methods of corrosion protection and corrosion processes and control in selected engineering environments* Structured for corrosion science and engineering classes at senior undergraduate and graduate level, and is an ideal reference that readers will want to use in their professional work* Worked examples, extensive end of chapter exercises and accompanying online solutions and written by an expert from a key pretochemical university
Download or read book Materials Handbook written by François Cardarelli and published by Springer Science & Business Media. This book was released on 2008-03-19 with total page 1365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique and practical book provides quick and easy access to data on the physical and chemical properties of all classes of materials. The second edition has been much expanded to include whole new families of materials while many of the existing families are broadened and refined with new material and up-to-date information. Particular emphasis is placed on the properties of common industrial materials in each class. Detailed appendices provide additional information, and careful indexing and a tabular format make the data quickly accessible. This book is an essential tool for any practitioner or academic working in materials or in engineering.
Download or read book Advances in Materials and Manufacturing Engineering written by Leijun Li and published by Springer Nature. This book was released on 2020-01-09 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers outstanding papers presented at the International Conference on Advances in Materials and Manufacturing Engineering (ICAMME 2019), held at KIIT Deemed to be University, Bhubaneswar, India, from 15 to 17 March 2019. It covers theoretical and empirical developments in various areas of mechanical engineering, including manufacturing, production, machine design, fluid/thermal engineering, and materials.
Download or read book Metals Abstracts written by and published by . This book was released on 1981 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermo Mechanical Processing of Metallic Materials written by Bert Verlinden and published by Elsevier. This book was released on 2007-06-07 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermo-Mechanical Processing of Metallic Materials describes the science and technology behind modern thermo-mechanical processing (TMP), including detailed descriptions of successful examples of its application in the industry. This graduate-level introductory resource aims to fill the gap between two scientific approaches and illustrate their successful linkage by the use of suitable modern case studies. The book is divided into three key sections focusing on the basics of metallic materials processing. The first section covers the microstructural science base of the subject, including the microstructure determined mechanical properties of metals. The second section deals with the current mechanical technology of plastic forming of metals. The concluding section demonstrates the interaction of the first two disciplines in a series of case studies of successful current TMP processing and looks ahead to possible new developments in the field. This text is designed for use by graduate students coming into the field, for a graduate course textbook, and for Materials and Mechanical Engineers working in this area in the industry. * Covers both physical metallurgy and metals processing* Links basic science to real everyday applications* Written by four internationally-known experts in the field
Download or read book Advances in Wrought Magnesium Alloys written by Colleen Bettles and published by Elsevier. This book was released on 2012-04-25 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important book summarises the wealth of recent research on our understanding of process-property relationships in wrought magnesium alloys and the way this understanding can be used to develop a new generation of alloys for high-performance applications.After an introductory overview of current developments in wrought magnesium alloys, part one reviews fundamental aspects of deformation behaviour. These chapters are the building blocks for the optimisation of processing steps covered in part two, which discusses casting, extrusion, rolling and forging technologies. The concluding chapters cover applications of wrought magnesium alloys in automotive and biomedical engineering.With its distinguished editors, and drawing on the work of leading experts in the field, Advances in wrought magnesium alloys is a standard reference for those researching, manufacturing and using these alloys. - Summarises recent research on our understanding of process-property relationships in wrought magnesium alloys - Discusses the way this understanding can be used to develop a new generation of alloys for high-performance applications - Reviews casting, extrusion, rolling and forging technologies, fundamental aspects of deformation behaviour, and applications of wrought magnesium alloys in automotive and biomedical engineering
Download or read book Additive Manufacturing of Metals written by Leila Ladani and published by . This book was released on 2020-08 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a technical introduction to additive manufacturing (AM) with a focus on powder bed fusion and metals. It provides the theory and industry-based practices to design, make, and test metal components via AM. After outlining the methods and materials of powder bed methods, the book explains the workings and physical limitations of electron beam and laser melt technologies in manufacturing parts, using a variety of metal powders. In this context, the physics of powder melting is described, as well as the effects of temperature variables on the properties of a part. The critical elements of how powder feedstock is chosen and formulated are explained. Processing methods are described using original design and engineering parameters developed by the author. Information is provided on current test methods of metals produced by AM, as well as how to carry out quality control, monitor reliability, and implement safety standards. For process design, a section is devoted to modeling.Each chapter includes a set of problems for students and practitioners that reflect metals' fabrication in industry.
Download or read book Advanced Coating Materials written by Liang Li and published by John Wiley & Sons. This book was released on 2018-12-06 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive, yet practical source of reference, and excellent foundation for comparing the properties and performance of coatings and selecting the most suitable materials based on specific service needs and environmental factors. Coating technology has developed significant techniques for protecting existing infrastructure from corrosion and erosion, maintaining and enhancing the performance of equipment, and provided novel functions such as smart coatings greatly benefiting the medical device, energy, automotive and construction industries. The mechanisms, usage, and manipulation of cutting-edge coating methods are the focus of this book. Not only are the working mechanisms of coating materials explored in great detail, but also craft designs for further optimization of more uniform, safe, stable, and scalable coatings. A group of leading experts in different coating technologies demonstrate their main applications, identify the key bottlenecks, and outline future prospects. Advanced Coating Materials broadly covers the coating techniques, including cold spray, plasma vapor deposition, chemical vapor deposition, sol–gel method, etc., and their significant applications in microreactor technology, super(de)wetting, joint implants, electrocatalyst, etc. Numerous kinds of coating structures are addressed, including nanosize particles, biomimicry structures, metals and complexed materials, along with the environmental and human compatible biopolymers resulting from microbial activities. This state-of-the-art book is divided into three parts: (1) Materials and Methods: Design and Fabrication, (2) Coating Materials: Nanotechnology, and (3) Advanced Coating Technology and Applications.
Download or read book Corrosion of Magnesium Alloys written by G L Song and published by Woodhead Publishing. This book was released on 2011-03-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of magnesium alloys is increasing in a range of applications, and their popularity is growing wherever lightweight materials are needed. This book provides a comprehensive account of the corrosion of magnesium alloys. It covers not only the corrosion performances and mechanisms of Mg alloys in conventional environments, such as sodium chloride solutions, but also looks at their corrosion behaviours in special media, like engine coolants and simulated body fluids. Part one covers fundamentals such as the corrosion electrochemistry, activity and passivity of magnesium and its alloys. Part two then considers the metallurgical effect in relation to the corrosion of magnesium alloys, including the role of micro-structure and earth-rare elements, the corrosion behaviour of magnesium-based bulk metallic glasses, and the corrosion of innovative magnesium alloys. Part three goes on to describe environmental influences on the corrosion of magnesium alloys, such as atmospheric corrosion, stress corrosion cracking, creep and fatigue behaviour, and galvanic corrosion. Finally, part four is concerned with various means of protecting magnesium alloys against corrosion through the use of aluminium electrodeposition, conversion and electrophoretic coatings, and anodisation. With its distinguished editor and team of contributors, this book is an invaluable resource for metallurgists, engineers and designers working with magnesium and its alloys, as well as professionals in the aerospace and automotive industries.
Download or read book Handbook of Engineering Practice of Materials and Corrosion written by Jung-Chul (Thomas) Eun and published by Springer Nature. This book was released on 2020-09-04 with total page 885 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an in-depth guide to the practical aspects of materials and corrosion engineering in the energy and chemical industries. The book covers materials, corrosion, welding, heat treatment, coating, test and inspection, and mechanical design and integrity. A central focus is placed on industrial requirements, including codes, standards, regulations, and specifications that practicing material and corrosion engineers and technicians face in all roles and in all areas of responsibility. The comprehensive resource provides expert guidance on general corrosion mechanisms and recommends materials for the control and prevention of corrosion damage, and offers readers industry-tested best practices, rationales, and case studies.
