Download or read book The Crosslinking of Aqueous Polymer Solutions by Gamma Radiation written by Erdogan Kiran and published by . This book was released on 1971 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Preparation Characterization and Utilization of Electrodes Coated with Polymeric Networks Formed by Gamma Radiation Crosslinking written by William R. Heineman and published by . This book was released on 1987 with total page 37 pages. Available in PDF, EPUB and Kindle. Book excerpt: The preparation, characterization and application of electrodes with specific chemical properties that are imparted by surface modification with polymer networks are the long-range goals of this research. Networks that are formed by crosslinking with gamma radiation have been evaluated with respect to swelling in aqueous solution, retention of polymer in the network, permeability, and the effect of radiation dosage on all of these properties through its control of crosslinking. Ionic water-soluble polymers such as polyDIALLYL DIMETHYL AMMONIUM CHOLRIDE, poly VINYLBENZYL TRIMETHYL AMMONIUM CHLORIDE, ploySTYRENE SULFONIC ACID, SODIUM SALT and polyACRYLIC ACID, which would ordinarily dissolve from the electrode surface in aqueous solution unless crosslinked into a network, and several neutral polymers such as polyACRLYONITRILE, polyETHYLENEIMINE, polyDIMETHYLSILOXANE and poly VINYL ALCOHOL have been investigated. The covalent attachment of organic and inorganic redox mediators and enzymes to networks by gamma irradiation of a mixture of polymer and the agent have been investigated. Network-coated electrodes with the appropriate properties are being developed for specific applications that required a stable, easily fabricated, fouling-resistant, rapidly responding, sensitive, and selective electrode.
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1975 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Technical Paper written by and published by . This book was released on 1979 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Poly vinyl chloride based Blends Interpenetrating Polymer Networks IPNs and Gels written by Sabu Thomas and published by Elsevier. This book was released on 2024-04-12 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: Poly(vinyl chloride)-Based Blends, IPNs, and Gels brings together the latest research on the blending of PVC, covering processing, materials, properties, and applications. This book addresses these challenges and highlights the state-of-the-art in the field, such as the development of eco-friendly micro and nanostructured functional materials based on PVC and advances in experimental and theoretical studies of PVC based-polymer blends. This is a valuable resource for researchers and advanced students in polymer science, chemistry, composite science, and materials science and engineering, as well as R&D professionals, engineers, and scientists working with advanced PVC-based materials across a range of industries. Offers methodical, in-depth coverage of PVC-based blends, IPNs and gels with each polymer type Explains advanced methods for PVC-based materials with improved properties for a range of novel applications Provides avenues for improved sustainability, discussing PVC from biomass, lifecycle, recycling, and other environmental considerations
Download or read book Handbook of Composites from Renewable Materials Polymeric Composites written by Vijay Kumar Thakur and published by John Wiley & Sons. This book was released on 2017-03-27 with total page 847 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique multidisciplinary 8-volume set focuses on the emerging issues concerning synthesis, characterization, design, manufacturing and various other aspects of composite materials from renewable materials and provides a shared platform for both researcher and industry. The Handbook of Composites from Renewable Materials comprises a set of 8 individual volumes that brings an interdisciplinary perspective to accomplish a more detailed understanding of the interplay between the synthesis, structure, characterization, processing, applications and performance of these advanced materials. The Handbook comprises 169 chapters from world renowned experts covering a multitude of natural polymers/ reinforcement/ fillers and biodegradable materials. Volume 6 is solely focused on the "Polymeric Composites". Some of the important topics include but not limited to: Keratin as renewable material for developing polymer composites; natural and synthetic matrices; hydrogels in tissue engineering; smart hydrogels: application in bioethanol production; principle renewable biopolymers; application of hydrogel biocomposites for multiple drug delivery; nontoxic holographic materials; bioplasticizer-epoxidized vegetable oils-based poly (lactic acid) blends and nanocomposites; preparation, characterization and adsorption properties of poly (DMAEA) – cross-linked starch gel copolymer in wastewater treatments; study of chitosan cross-linking hydrogels for absorption of antifungal drugs using molecular modelling; pharmaceutical delivery systems composed of chitosan; eco-friendly polymers for food packaging; influence of surface modification on the thermal stability and percentage of crystallinity of natural abaca fiber; influence of the use of natural fibers in composite materials assessed on a life cycle perspective; plant polysaccharides-blended ionotropically-gelled alginate multiple-unit systems for sustained drug release; vegetable oil based polymer composites; applications of chitosan derivatives in wastewater treatment; novel lignin-based materials as a products for various applications; biopolymers from renewable resources and thermoplastic starch matrix as polymer units of multi-component polymer systems for advanced applications; chitosan composites: preparation and applications in removing water pollutants and recent advancements in biopolymer composites for addressing environmental issues.
Download or read book Bulletin of the Institute for Chemical Research Kyoto University written by 京都大学化学研究所 and published by . This book was released on 1963 with total page 878 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of Research of the National Bureau of Standards written by United States. National Bureau of Standards and published by . This book was released on 1967 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Study of the Properties of the Gels Produced by Reticulation of Dilute Aqueous Solutions of Poly ethylene Oxide in a Cobalt 60 Gamma Radiation Field written by Robert Adrian Van Brederode and published by . This book was released on 1969 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Emerging Technologies for Nanoparticle Manufacturing written by Jayvadan K. Patel and published by Springer Nature. This book was released on 2021-06-23 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of nanoparticle production methods, scale-up issues drawing attention to industrial applicability, and addresses their successful applications for commercial use. There is a need for a reference book which will address various aspects of recent progress in the methods of development of nanoparticles with a focus on polymeric and lipid nanoparticles, their scale-up techniques, and challenges in their commercialization. There is no consolidated reference book that discusses the emerging technologies for nanoparticle manufacturing. This book focuses on the following major aspects of emerging technologies for nano particle manufacturing. I. Introduction and Biomedical Applications of Nanoparticles II. Polymeric Nanoparticles III. Lipid Nanoparticles IV. Metallic Nanoparticles V. Quality Control for Nanoparticles VI. Challenges in Scale-Up Production of Nanoparticles VII. Injectable Nanosystems VIII. Future Directions and Challenges Leading scientists are selected as chapter authors who have contributed significantly in this field and they focus more on emerging technologies for nanoparticle manufacturing, future directions, and challenges.
Download or read book Three Methods for in Situ Cross linking of Polyvinyl Alcohol Films for Application as Ion conducting Membranes in Potassium Hydroxide Electrolyte written by Warren H. Philipp and published by . This book was released on 1979 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Progress and Prospect of Nanocarriers written by Sushil K. Kashaw and published by Academic Press. This book was released on 2024-05-17 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress and Prospect of Nanocarriers: Design, Concept, and Recent Advances examines the different nanocarriers that are currently being developed for specific applications in biomedical drug delivery, disease management, diagnosis and therapy. Nanosized drug delivery systems have gained tremendous amounts of clinical interest due to their effective bio-distribution and enhanced pharmacokinetic and selective targeting capability which results in high therapeutic potential, low side effects, and the generation of cost-effective drug delivery systems. Numerous effective nanocarriers have been evolving, including polymeric nanoparticles, liposomes, microspheres, dendrimers, and carbon nanotubes.This book is a helpful reference for scientists and students in the fields of drug delivery, biomaterials and nanomedicine, as well as scientists and engineers in industrial disciplines of drug delivery and drug formulation. Focuses on multiple nanocarrier platforms Examines the different technologies that have improved drug delivery and suggests where the technology is headed Written for researchers and students by diverse experts in biomaterials, drug delivery and nanomedicine
Download or read book Radiation Effects on Polymers written by Roger Lee Clough and published by . This book was released on 1991 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is the most extensive resource on polymer radiation effects to be available in more than a decade. This new volume reviews the fundamental chemistry and physics of polymer-radiation interaction and examines recent progress in most major areas of the field. Its 38 chapters, written by leading experts from around the world, cover: fundamentals of polymer radiation chemistry; technological applications of radiation to polymers (including radiation processing; radiation curing; sterilization; cross-linking, polymerization, grafting, X-ray resists, and others); and degradation of stabilization of irradiated polymers (including nuclear plants, scintillation detectors for particle physics, and others).
Download or read book Encyclopedia of Polymer Applications 3 Volume Set written by Munmaya Mishra and published by CRC Press. This book was released on 2018-12-17 with total page 2954 pages. Available in PDF, EPUB and Kindle. Book excerpt: Undoubtedly the applications of polymers are rapidly evolving. Technology is continually changing and quickly advancing as polymers are needed to solve a variety of day-to-day challenges leading to improvements in quality of life. The Encyclopedia of Polymer Applications presents state-of-the-art research and development on the applications of polymers. This groundbreaking work provides important overviews to help stimulate further advancements in all areas of polymers. This comprehensive multi-volume reference includes articles contributed from a diverse and global team of renowned researchers. It offers a broad-based perspective on a multitude of topics in a variety of applications, as well as detailed research information, figures, tables, illustrations, and references. The encyclopedia provides introductions, classifications, properties, selection, types, technologies, shelf-life, recycling, testing and applications for each of the entries where applicable. It features critical content for both novices and experts including, engineers, scientists (polymer scientists, materials scientists, biomedical engineers, macromolecular chemists), researchers, and students, as well as interested readers in academia, industry, and research institutions.
Download or read book Polymerization of Ethylene Under the Influence of Gamma radiation written by Sergeĭ Sergeevich Medvedev and published by . This book was released on 1960 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydrogel Sensors and Actuators written by Gerald Gerlach and published by Springer Science & Business Media. This book was released on 2009-09-24 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrogels are a fascinating class of polymers which show an immense ability of swelling under the influence of temperature, pH value or concentrations of different species in aqueous solutions. The volume change can amount up to several hundred percent. This unique behaviour is already used in such applications like disposable diapers, contact lenses or drug-delivery systems. The ability to perform mechanical work has been shifted the technical interest more and more towards sensors and actuators exploiting the thermo-chemo-mechano-electrical coupling within hydrogels. The accuracy requirements for such devices are much more demanding than for previous applications. Therefore, a deep knowledge of both the material and the functional properties of hydrogel sensors and actuators is needed. The monograph describes state of the art and recent developments for these materials in sensor and actuator technology.
Download or read book Polymer Blends for Drug Release Systems written by Nafisa Gull and published by Frontiers Media SA. This book was released on 2023-03-17 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: