Download or read book Interaction Control of Robot Manipulators written by Ciro Natale and published by Springer Science & Business Media. This book was released on 2003-01-08 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robot interaction control is one of the most challenging targets for industrial robotics. While it would provide the robotic systems with a high degree of autonomy, its effectiveness is limited by the complexity of this problem and by the necessity of special sensors (six-dof force sensors). On the other hand, the control methodologies to be adopted for addressing this problem can be considered mature and well-assessed. All the known interaction control strategies (e.g. impedance, direct force control) are tackled and reshuffled in a geometrically consistent way for simplification of the task specification and enhancement of the execution performance. This book represents the first step towards the application of theoretical results at an industrial level; in fact each proposed control algorithm is experimentally tested here on an industrial robotic setup.

Download or read book Redundancy in Robot Manipulators and Multi Robot Systems written by Dejan Milutinović and published by Springer Science & Business Media. This book was released on 2012-10-12 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The trend in the evolution of robotic systems is that the number of degrees of freedom increases. This is visible both in robot manipulator design and in the shift of focus from single to multi-robot systems. Following the principles of evolution in nature, one may infer that adding degrees of freedom to robot systems design is beneficial. However, since nature did not select snake-like bodies for all creatures, it is reasonable to expect the presence of a certain selection pressure on the number of degrees of freedom. Thus, understanding costs and benefits of multiple degrees of freedom, especially those that create redundancy, is a fundamental problem in the field of robotics. This volume is mostly based on the works presented at the workshop on Redundancy in Robot Manipulators and Multi-Robot Systems at the IEEE/RSJ International Conference on Intelligent Robots and Systems - IROS 2011. The workshop was envisioned as a dialog between researchers from two separate, but obviously related fields of robotics: one that deals with systems having multiple degrees of freedom, including redundant robot manipulators, and the other that deals with multirobot systems. The volume consists of twelve chapters, each representing one of the two fields.

Download or read book Feedback Systems Input output Properties written by C.A. Desoer and published by Elsevier. This book was released on 2012-12-02 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Feedback Systems: Input-output Properties deals with the basic input-output properties of feedback systems. Emphasis is placed on multiinput-multioutput feedback systems made of distributed subsystems, particularly continuous-time systems. Topics range from memoryless nonlinearities to linear systems, the small gain theorem, and passivity. Norms and general theorems are also considered. This book is comprised of six chapters and begins with an overview of a few simple facts about feedback systems and simple examples of nonlinear systems that illustrate the important distinction between the questions of existence, uniqueness, continuous dependence, and boundedness with respect to bounded input and output. The next chapter describes a number of useful properties of norms and induced norms and of normed spaces. Several theorems are then presented, along with the main results concerning linear systems. These results are used to illustrate the applications of the small gain theorem to different classes of systems. The final chapter outlines the framework necessary to discuss passivity and demonstrate the applications of the passivity theorem. This monograph will be a useful resource for mathematically inclined engineers interested in feedback systems, as well as undergraduate engineering students.

Download or read book Robotics Research written by Georges Giralt and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication covers all the topics which are relevant to Advanced Robotics today, ranging from Systems Design to Reasoning and Planning. It is based on the Seventh International Symposium on Robotics Research held in Germany on October, 21 - 24th, 1995. The papers were written by specialists in the field from the United States, Europe, Japan, Australia and Canada. The editors, who also chaired this symposium, present the latest research results as well as new approaches to long standing problems. Robotics Research is a contribution to the emerging concepts, methods and tools that shape Robotics. The papers range from pure research reports to application-oriented studies. The topics covered include: manipulation, control, virtual reality, motion planning, 3D vision and industrial systems' issues.

Download or read book Neural Networks for Cooperative Control of Multiple Robot Arms written by Shuai Li and published by Springer. This book was released on 2017-10-29 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book to focus on solving cooperative control problems of multiple robot arms using different centralized or distributed neural network models, presenting methods and algorithms together with the corresponding theoretical analysis and simulated examples. It is intended for graduate students and academic and industrial researchers in the field of control, robotics, neural networks, simulation and modelling.

Download or read book Experimental Robotics VII written by Daniela Rus and published by Springer. This book was released on 2007-09-04 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental robotics is at the core of validating robotics research for both its system science and theoretical foundations. Robotics experiments serve as a unifying theme for robotics system science and theoretical foundations. This book collects papers on the state of the art in experimental robotics. The papers were presented at the 2000 International Symposium on Experimental Robotics.

Download or read book Advanced Studies Of Flexible Robotic Manipulators Modeling Design Control And Applications written by Yanqing Gao and published by World Scientific. This book was released on 2003-08-14 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexible robotic manipulators pose various challenges in research as compared to rigid robotic manipulators, ranging from system design, structural optimization, and construction to modeling, sensing, and control. Although significant progress has been made in many aspects over the last one-and-a-half decades, many issues are not resolved yet, and simple, effective, and reliable controls of flexible manipulators still remain an open quest. Clearly, further efforts and results in this area will contribute significantly to robotics (particularly automation) as well as its application and education in general control engineering. To accelerate this process, the leading experts in this important area present in this book the state of the art in advanced studies of the design, modeling, control and applications of flexible manipulators.

Download or read book Synchronization and Control of Multiagent Systems written by Dong Sun and published by CRC Press. This book was released on 2018-10-09 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiple intelligent agent systems are commonly used in research requiring complex behavior. Synchronization control provides an advantage in solving the problem of multi-agent coordination. This book focuses on the use of synchronization control to coordinate the group behavior of multiple agents. The author includes numerous real-world applicatio

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Intelligent Robotic Planning Systems written by Phillip Chen-yu Sheu and published by World Scientific. This book was released on 1993-07-21 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focusses on the problem of planning in the context of robotics. Unlike most books on robotics planning which are either too abstract or too specific, this one extends the techniques developed for generic planning problems with robotics-specific considerations so that the task of planning can be discussed in a more uniform way. It also includes the latest results in reconfigurable (mobile) robot planning, multiple robot planning, plan recovery, and planning in uncertain environments. This volume is probably the very first book in the market that provides a theoretical foundation for planning techniques and their applications. It also bridges the gap that has been existing for a long time between computer scientists and application engineers. It will be of interest to senior and graduate students in engineering and computer science, AI researchers and professionals.

Download or read book Competition Based Neural Networks with Robotic Applications written by Shuai Li and published by Springer. This book was released on 2017-05-30 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focused on solving competition-based problems, this book designs, proposes, develops, analyzes and simulates various neural network models depicted in centralized and distributed manners. Specifically, it defines four different classes of centralized models for investigating the resultant competition in a group of multiple agents. With regard to distributed competition with limited communication among agents, the book presents the first distributed WTA (Winners Take All) protocol, which it subsequently extends to the distributed coordination control of multiple robots. Illustrations, tables, and various simulative examples, as well as a healthy mix of plain and professional language, are used to explain the concepts and complex principles involved. Thus, the book provides readers in neurocomputing and robotics with a deeper understanding of the neural network approach to competition-based problem-solving, offers them an accessible introduction to modeling technology and the distributed coordination control of redundant robots, and equips them to use these technologies and approaches to solve concrete scientific and engineering problems.

Download or read book Aerial Robotic Manipulation written by Anibal Ollero and published by Springer. This book was released on 2019-06-27 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerial robotic manipulation integrates concepts and technologies coming from unmanned aerial systems and robotics manipulation. It includes not only kinematic, dynamics, aerodynamics and control but also perception, planning, design aspects, mechatronics and cooperation between several aerial robotics manipulators. All these topics are considered in this book in which the main research and development approaches in aerial robotic manipulation are presented, including the description of relevant systems. In addition of the research aspects, the book also includes the deployment of real systems both indoors and outdoors, which is a relevant characteristic of the book because most results of aerial robotic manipulation have been validated only indoor using motion tracking systems. Moreover, the book presents two relevant applications: structure assembly and inspection and maintenance, which has started to be applied in the industry. The Chapters of the book will present results of two main European Robotics Projects in aerial robotics manipulation: FP7 ARCAS and H2020 AEROARMS. FP7 ARCAS defined the basic concepts on aerial robotic manipulation, including cooperative manipulation. The H2020 AEROARMS on aerial robot with multiple arms and advanced manipulation capabilities for inspection and maintenance has two general objectives: (1) development of advanced aerial robotic manipulation methods and technologies, including manipulation with dual arms and multi-directional thrusters aerial platforms; and (2) application to the inspection and maintenance.

Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Oata Analysis and Synthesis (CINOAS) * at Purdue. University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 33 (thesis year 1988) a total of 13,273 theses titles from 23 Canadian and 1 85 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 33 reports theses submitted in 1988, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.

Download or read book Technical Reports Awareness Circular TRAC written by and published by . This book was released on 1988-06 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Experimental Robotics written by Oussama Khatib and published by Springer. This book was released on 2013-08-20 with total page 919 pages. Available in PDF, EPUB and Kindle. Book excerpt: Incorporating papers from the 12th International Symposium on Experimental Robotics (ISER), December 2010, this book examines the latest advances across the various fields of robotics. Offers insights on both theoretical concepts and experimental results.

Download or read book Interdisciplinary Perspectives on Contemporary Conflict Resolution written by Novais, Paulo and published by IGI Global. This book was released on 2016-04-19 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the dawn of human speech and interaction, there have been conflicts among individuals, regions, and whole nations. Disagreements, miscommunications, no matter the name they take; conflicts will continue to be present in every field of work or study. New technologies such as social media have extended people’s ability to communicate, and therefore dispute, making additional research and practical solutions for resolving conflict all the more necessary. Interdisciplinary Perspectives on Contemporary Conflict Resolution presents theoretical perspectives on the causes of diverse conflicts, approaches novel disputes and the technology associated therein, and provides readers with multifaceted solutions to the myriad of potential arguments and disagreements that arise as part of the human condition. This interdisciplinary publication is a critical resource for researchers, legal practitioners, policy makers, government officials, and students and educators in the fields of political science, communication studies, and business.

Download or read book Artificial Intelligence Concepts Methodologies Tools and Applications written by Management Association, Information Resources and published by IGI Global. This book was released on 2016-12-12 with total page 3095 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ongoing advancements in modern technology have led to significant developments in artificial intelligence. With the numerous applications available, it becomes imperative to conduct research and make further progress in this field. Artificial Intelligence: Concepts, Methodologies, Tools, and Applications provides a comprehensive overview of the latest breakthroughs and recent progress in artificial intelligence. Highlighting relevant technologies, uses, and techniques across various industries and settings, this publication is a pivotal reference source for researchers, professionals, academics, upper-level students, and practitioners interested in emerging perspectives in the field of artificial intelligence.