Download or read book The Computer Assisted Modelling Simulation and Analysis of Two wheeled Road Vehicles written by Mahbub Rahman Gani and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modelling Simulation and Control of Two Wheeled Vehicles Enhanced Edition written by Mara Tanelli and published by John Wiley & Sons. This book was released on 2014-04-23 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enhanced e-book includes videos Many books have been written on modelling, simulation and control of four-wheeled vehicles (cars, in particular). However, due to the very specific and different dynamics of two-wheeled vehicles, it is very difficult to reuse previous knowledge gained on cars for two-wheeled vehicles. Modelling, Simulation and Control of Two-Wheeled Vehicles presents all of the unique features of two-wheeled vehicles, comprehensively covering the main methods, tools and approaches to address the modelling, simulation and control design issues. With contributions from leading researchers, this book also offers a perspective on the future trends in the field, outlining the challenges and the industrial and academic development scenarios. Extensive reference to real-world problems and experimental tests is also included throughout. Key features: The first book to cover all aspects of two-wheeled vehicle dynamics and control Collates cutting-edge research from leading international researchers in the field Covers motorcycle control – a subject gaining more and more attention both from an academic and an industrial viewpoint Covers modelling, simulation and control, areas that are integrated in two-wheeled vehicles, and therefore must be considered together in order to gain an insight into this very specific field of research Presents analysis of experimental data and reports on the results obtained on instrumented vehicles. Modelling, Simulation and Control of Two-Wheeled Vehicles is a comprehensive reference for those in academia who are interested in the state of the art of two-wheeled vehicles, and is also a useful source of information for industrial practitioners.
Download or read book Modelling Simulation and Control of Two Wheeled Vehicles written by Mara Tanelli and published by John Wiley & Sons. This book was released on 2014-02-04 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enhanced e-book includes videos Many books have been written on modelling, simulation and control of four-wheeled vehicles (cars, in particular). However, due to the very specific and different dynamics of two-wheeled vehicles, it is very difficult to reuse previous knowledge gained on cars for two-wheeled vehicles. Modelling, Simulation and Control of Two-Wheeled Vehicles presents all of the unique features of two-wheeled vehicles, comprehensively covering the main methods, tools and approaches to address the modelling, simulation and control design issues. With contributions from leading researchers, this book also offers a perspective on the future trends in the field, outlining the challenges and the industrial and academic development scenarios. Extensive reference to real-world problems and experimental tests is also included throughout. Key features: The first book to cover all aspects of two-wheeled vehicle dynamics and control Collates cutting-edge research from leading international researchers in the field Covers motorcycle control – a subject gaining more and more attention both from an academic and an industrial viewpoint Covers modelling, simulation and control, areas that are integrated in two-wheeled vehicles, and therefore must be considered together in order to gain an insight into this very specific field of research Presents analysis of experimental data and reports on the results obtained on instrumented vehicles. Modelling, Simulation and Control of Two-Wheeled Vehicles is a comprehensive reference for those in academia who are interested in the state of the art of two-wheeled vehicles, and is also a useful source of information for industrial practitioners.
Download or read book Off road Vehicle Dynamics written by Hamid Taghavifar and published by Springer. This book was released on 2016-07-27 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the analysis of off-road vehicle dynamics from kinetics and kinematics perspectives and the performance of vehicle traversing over rough and irregular terrain. The authors consider the wheel performance, soil-tire interactions and their interface, tractive performance of the vehicle, ride comfort, stability over maneuvering, transient and steady state conditions of the vehicle traversing, modeling the aforementioned aspects and optimization from energetic and vehicle mobility perspectives. This book brings novel figures for the transient dynamics and original wheel terrain dynamics at on-the-go condition.
Download or read book Modelling and Control of an Autonomous Two Wheeled Vehicle written by Alen Turnwald and published by Logos Verlag Berlin GmbH. This book was released on 2020-11-13 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: With respect to the future urban mobility, modern electrical bicycles, advanced motorcycles and innovative two-wheeled vehicles are arresting enormous amount of attention. Especially, model-based control and optimal trajectory planning for such vehicles are important to the research and development of the future. Therefore, a reliable and yet usable vehicle model as well as a systematic approach to motion control for two-wheeled vehicles are essential, to which this work makes a contribution. Currently available two-wheeled vehicle models are mostly either too complex to be used for a systematic control synthesis, or too simple such that the physical behaviour of the vehicle is no more represented. In this thesis, a unifying approach to modelling and control for autonomous two-wheeled vehicles is presented. The resulting model is generally valid and physically detailed enough to represent the characteristic dynamical behaviour such as the self-stability. At the same time, it is suited to a systematic control synthesis. Furthermore, the systematic extenddability, for instance by a rider, is demonstrated. The model is validated by simulations and by comparison to well-known models from the literature. The proposed vehicle model is derived in the Lagrangian and Hamiltonian framework and used for model-based optimal trajectory planning. Furthermore, a passivity-based trajectory tracking controller is designed based on the resulting port-Hamiltonian system using the so-called generalised canonical transformations. Such a controller is physically interpretable and robust against parameter uncertainties. To this end, existing approaches of passivity-based controller design are extended and adjusted for two-wheeled vehicles. Finally, a prototype two-wheeled vehicle is introduced which is used for experimental validation of the model and to demonstrate motion control algorithms for autonomous two-wheeled vehicles.
Download or read book Road Vehicle Dynamics written by Georg Rill and published by CRC Press. This book was released on 2022-02 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Road Vehicle Dynamics: Fundamentals and Modeling with MATLAB(R), Second Edition combines coverage of vehicle dynamics concepts with MATLAB v9.4 programming routines and results, along with examples and numerous chapter exercises. Improved and updated, the revised text offers new coverage of active safety systems, rear wheel steering, race car suspension systems, airsprings, four-wheel drive, mechatronics, and other topics. Based on the lead author's extensive lectures, classes, and research activities, this unique text provides readers with insights into the computer-based modeling of automobiles and other ground vehicles. Instructor resources, including problem solutions, are available from the publisher.
Download or read book Vehicle Dynamics written by Dieter Schramm and published by Springer. This book was released on 2017-07-03 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors examine in detail the fundamentals and mathematical descriptions of the dynamics of automobiles. In this context, different levels of complexity are presented, starting with basic single-track models up to complex three-dimensional multi-body models. A particular focus is on the process of establishing mathematical models based on real cars and the validation of simulation results. The methods presented are explained in detail by means of selected application scenarios. In addition to some corrections, further application examples for standard driving maneuvers have been added for the present second edition. To take account of the increased use of driving simulators, both in research, and in industrial applications, a new section on the conception, implementation and application of driving simulators has been added.
Download or read book Road and Off Road Vehicle System Dynamics Handbook written by Gianpiero Mastinu and published by CRC Press. This book was released on 2014-01-06 with total page 1710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring contributions from leading experts, the Road and Off-Road Vehicle System Dynamics Handbook provides comprehensive, authoritative coverage of all the major issues involved in road vehicle dynamic behavior. While the focus is on automobiles, this book also highlights motorcycles, heavy commercial vehicles, and off-road vehicles. The authors of the individual chapters, both from automotive industry and universities, address basic issues, but also include references to significant papers for further reading. Thus the handbook is devoted both to the beginner, wishing to acquire basic knowledge on a specific topic, and to the experienced engineer or scientist, wishing to have up-to-date information on a particular subject. It can also be used as a textbook for master courses at universities. The handbook begins with a short history of road and off-road vehicle dynamics followed by detailed, state-of-the-art chapters on modeling, analysis and optimization in vehicle system dynamics, vehicle concepts and aerodynamics, pneumatic tires and contact wheel-road/off-road, modeling vehicle subsystems, vehicle dynamics and active safety, man-vehicle interaction, intelligent vehicle systems, and road accident reconstruction and passive safety. Provides extensive coverage of modeling, simulation, and analysis techniques Surveys all vehicle subsystems from a vehicle dynamics point of view Focuses on pneumatic tires and contact wheel-road/off-road Discusses intelligent vehicle systems technologies and active safety Considers safety factors and accident reconstruction procedures Includes chapters written by leading experts from all over the world This text provides an applicable source of information for all people interested in a deeper understanding of road vehicle dynamics and related problems.
Download or read book Nonlinear Dynamics of a Wheeled Vehicle written by Ryszard Andrzejewski and published by Springer Science & Business Media. This book was released on 2005-03-03 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: On average, 60% of the world's people and cargo is transported by vehicle that move on rubber tires over roadways of various construction, composition, and quality. The number of such vehicles, including automobiles and all manner of trucks, increases continually with a growing positive impact on accessibility and a growing negative impact on interactions among humans and their relationship to the surrounding environment. This multiplicity of vehicles, through their physical impact and their emissions, is responsible for, among other negative results: waste of energy, pollution through emission of harmful compounds, degradation of road surfaces, crowding of roads leading to waste of time and increase of social stress, and decrease in safety and comfort. In particular, the safety of vehicular traffic depends on a man-vehicle-road system that includes both active and passive security controls. In spite of the drawbacks mentioned above, the governments of almost every country in the world not only expect but facilitate improvements in vehicular transport performance in order to increase such parameters as load capacity and driving velocity, while decreasing such parameters as costs to passengers, energy resources investments, fuel consumption, etc. Some of the problems have clear, if not always easily attainable, solutions.
Download or read book Proceedings First North American Workshop on Modeling the Mechanics of Off Road Mobility 5 6 May 1994 written by Roger W. Meier and published by . This book was released on 1994 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamics of Vehicles on Roads and Tracks Vol 2 written by Maksym Spiryagin and published by CRC Press. This book was released on 2017-12-06 with total page 1101 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Symposium on Dynamics of Vehicles on Roads and Tracks is the leading international gathering of scientists and engineers from academia and industry in the field of ground vehicle dynamics to present and exchange their latest innovations and breakthroughs. Established in Vienna in 1977, the International Association of Vehicle System Dynamics (IAVSD) has since held its biennial symposia throughout Europe and in the USA, Canada, Japan, South Africa and China. The main objectives of IAVSD are to promote the development of the science of vehicle dynamics and to encourage engineering applications of this field of science, to inform scientists and engineers on the current state-of-the-art in the field of vehicle dynamics and to broaden contacts among persons and organisations of the various countries engaged in scientific research and development in the field of vehicle dynamics and related areas. IAVSD 2017, the 25th Symposium of the International Association of Vehicle System Dynamics was hosted by the Centre for Railway Engineering at Central Queensland University, Rockhampton, Australia in August 2017. The symposium focused on the following topics related to road and rail vehicles and trains: dynamics and stability; vibration and comfort; suspension; steering; traction and braking; active safety systems; advanced driver assistance systems; autonomous road and rail vehicles; adhesion and friction; wheel-rail contact; tyre-road interaction; aerodynamics and crosswind; pantograph-catenary dynamics; modelling and simulation; driver-vehicle interaction; field and laboratory testing; vehicle control and mechatronics; performance and optimization; instrumentation and condition monitoring; and environmental considerations. Providing a comprehensive review of the latest innovative developments and practical applications in road and rail vehicle dynamics, the 213 papers now published in these proceedings will contribute greatly to a better understanding of related problems and will serve as a reference for researchers and engineers active in this specialised field. Volume 2 contains 135 papers under the subject heading Rail.
Download or read book Road Vehicle Dynamics written by Georg Rill and published by CRC Press. This book was released on 2011-09-21 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: In striving for optimal comfort and safety conditions in road vehicles, today's electronically controlled components provide a range of new options. These are developed and tested using computer simulations in software in the loop or hardware in the loop environments-an advancement that requires the modern automotive engineer to be able to build ba
Download or read book The Multibody Systems Approach to Vehicle Dynamics written by Michael Blundell and published by Elsevier. This book was released on 2004-08-21 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multibody Systems Approach to Vehicle Dynamics aims to bridge a gap between the subject of classical vehicle dynamics and the general-purpose computer-based discipline known as multibody systems analysis (MBS). The book begins by describing the emergence of MBS and providing an overview of its role in vehicle design and development. This is followed by separate chapters on the modeling, analysis, and post-processing capabilities of a typical simulation software; the modeling and analysis of the suspension system; tire force and moment generating characteristics and subsequent modeling of these in an MBS simulation; and the modeling and assembly of the rest of the vehicle, including the anti-roll bars and steering systems. The final two chapters deal with the simulation output and interpretation of results, and a review of the use of active systems to modify the dynamics in modern passenger cars. This book intended for a wide audience including not only undergraduate, postgraduate and research students working in this area, but also practicing engineers in industry who require a reference text dealing with the major relevant areas within the discipline. Full of practical examples and applications Uses industry standard ADAMS software based applications Guides readers from modelling suspension movement through to full vehicle models able to perform handling manoeuvres
Download or read book Road and Off Road Vehicle Dynamics written by Moustafa El-Gindy and published by Springer Nature. This book was released on 2023-07-10 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces and provides a detailed understanding of on- and off-road vehicle dynamics. It discusses classical on-road tyre mechanics, including finite element tyre modelling and validation, using a combination of theoretical and experimental data sets. Chapters explore new computational techniques that describe terrain models and combined to develop better off-road vehicle models, and focus is placed on terrain characterization and modelling, using two popular modelling techniques, as well as performance characteristics of off-road vehicles - including rolling and driven combinations, traction, and steering. The effect of multi-pass and soil compaction on tyre performance is described as well. The book presents a unique neuro-tyre model for both on-road and off-road situations, capable of computing the steering, braking characteristics, and soil compaction. Road vehicle characteristics are described, including the stability and control, roll centre and roll axis, and rollover mechanics. The road vehicle braking performance is also described, including the brake components, choice of brake, and the transient load transfer. Finally, the dynamics and control of multi-wheel combat vehicles are presented and described extensively. The book is dedicated to undergraduate and graduate engineering students, in addition to researchers, and the automotive industry. As well as provide the readers with a better understanding of vehicle dynamics and soil mechanics. The book is also beneficial for automotive industries looking for a quick and reliable model to be implemented in their main software.
Download or read book Report written by and published by . This book was released on 1985 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Terramechanics and Off Road Vehicle Engineering written by J.Y. Wong and published by Butterworth-Heinemann. This book was released on 2009-10-20 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Terramechanics and Off-Road Vehicle Engineering will be of great interest to any professional engineer or automotive engineering student working on off-road vehicles. Reflecting the increase in off-road vehicle production and development—recreational, agricultural, construction, military—this book equips readers with all of the necessary knowledge to successfully design and model off-road vehicle systems, and provides a comprehensive introduction to terramechanics, the mechanics of vehicle/terrain interaction. The only book to cover the principles of off-road vehicle and terrain engineering, a rapidly developing sector that includes SUVs, tractors and agricultural vehicles, military vehicles, and construction equipment Covers the latest developments in the field, including the latest computer-aided methods employed in the development of new generation of high-mobility off-road vehicles in Europe, North America and Asia. Ideal for professional reference and course reference by students, with new detailed worked design examples, case studies, and accompanying problems and solutions.
Download or read book Applied Mathematics Modeling and Computer Simulation written by C.-H. Chen and published by IOS Press. This book was released on 2022-12-20 with total page 1170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied mathematics, together with modeling and computer simulation, is central to engineering and computer science and remains intrinsically important in all aspects of modern technology. This book presents the proceedings of AMMCS 2022, the 2nd International Conference on Applied Mathematics, Modeling and Computer Simulation, held in Wuhan, China, on 13 and 14 August 2022, with online presentations available for those not able to attend in person due to continuing pandemic restrictions. The conference served as an open forum for the sharing and spreading of the newest ideas and latest research findings among all those involved in any aspect of applied mathematics, modeling and computer simulation, and offered an ideal platform for bringing together researchers, practitioners, scholars, professors and engineers from all around the world to exchange the newest research results and stimulate scientific innovation. More than 150 participants were able to exchange knowledge and discuss the latest developments at the conference. The book contains 127 peer-reviewed papers, selected from more than 200 submissions and ranging from the theoretical and conceptual to the strongly pragmatic; all addressing industrial best practice. Topics covered included mathematical modeling and application, engineering applications and scientific computations, and simulation of intelligent systems. The book shares practical experiences and enlightening ideas and will be of interest to researchers and practitioners in applied mathematics, modeling and computer simulation everywhere.