Download or read book The Complete Book on Meat Processing And Preservation with Packaging Technology written by NIIR Board of Consultants & Engineers and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2005-10-01 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Meat was originally processed to preserve it, but since the various procedures cause so many changes in texture and flavour it is also a means of adding variety to the diet. Processing also provides scope to mix the less desirable parts of the carcass with lean meat and in addition is a means of extending meat supplies by including other foodstuffs such as cereal in the product. Food preservation is a method of maintaining foods at a desired level of properties or nature for their maximum benefits. Preservation usually involves preventing the growth of bacteria, yeasts, fungi, and other micro organisms (although some methods work by introducing bacteria, or fungi to the food), as well as retarding the oxidation of fats which cause rancidity. Today, meat is processed with salt, colour fixing ingredients, and seasonings in order to impart desired palatability traits to intact and comminuted meat products. Products intermediate to these categories are sectioned, or chunked and formed meats. There are various methods for the preservation of meat; curing, dry curing, smoking, canning, freezing dehydration, fat extraction (wet or steam rendering), etc. Meat curing agents include sodium chloride, nitrite, ascorbate or erythorbate and possibly sodium phosphate, sucrose, dextrose, or corn syrup and seasonings. The salt content of processed meats varies 1 to 12%, according to the type of product. Many intact and comminuted, cured meat products are smoked to impart a desirable smoked flavour and colour. The smoking process many also include a drying or cooking cycle, depending on the product. Canned meats may be processed to be commercially sterile or semi preserved. The objective of commercial sterilization is to destroy all harmful bacteria or bacteria that may cause spoilage of the product under normal unrefrigerated storage. However, the process does not kill the spores of all heat resistant bacteria. Frozen meat can be kept at low temperatures for many months. Freezing and subsequent thawing produce changes in the structure of meat that affect its physical properties. If meat is frozen very rapidly at low temperatures, the ice crystals are small and form within the fibers. The drip loss upon thawing is generally greater in slow frozen than in quick frozen meat. Freeze drying meat extends shelf life and reduces weight. The meat is readily defrosted by immersing in water before cooking. Under optimum processing and storage conditions, reconstituted meats have acceptable flavour, colour, texture and nutrient retention. The meat packing industry handles the slaughtering, processing, packaging, and distribution of animals such as cattle, pigs, sheep and other livestock. The basic purpose of packaging is to protect meat and meat products from undesirable impacts on quality including microbiological and physio chemical alterations. Packaging protects foodstuffs during processing, storage and distribution from contamination by dirt (by contact with surfaces and hands), microorganisms (bacteria, moulds, and yeasts), parasites (mainly insects), toxic substances (chemicals), influences affecting colour, smell and taste (off odour, light, oxygen), loss or uptake of moisture. As such, due to the recent up gradation of preservation techniques, the preservation industry is also growing almost at the same rate as the food industry which is about 10 to 12% per year. Some of the fundamentals of the book are meat product, simultaneous flavouring and tenderizing, synthetic flavouring, preservation: moisture retention and surface protection, antimicrobial treatment, antioxidant application to freeze dried meats, packaging and handling for storage and transportation, continuous steam cooking of ground meat, activators of natural proteolytic enzymes, isotonic enzyme solution with specific activity, inactivation of enzymes with high pressure, etc. The origin of meat processing is lost in antiquity but probably began when primitive humans first learned that salt is an effective preservative and that cooking prolongs the keeping quality of fresh meat. This book includes the processing of fresh meats, the different curing agents, method of curing, smoking and manufacturing of various meat products such as sausages, canned meat, cured and smoked meats etc. The book is very useful for entrepreneurs, technocrats and those who want to venture in to this field. TAGS All about the Meat Processing Industry, Beef Meat Processing Technology, Beef Products, Best small and cottage scale industries, Book of Meat and Meat Processing, Book on Meat Processing and Preservation, Business guidance for Meat processing, Business Plan for a Startup Business, Business Plan for Small Meat Plant, Business start-up, Complete book on meat processing, Cured meat cuts, How to Cure Meat, How to Start a Meat processing industry?, How to Start a Meat Production Business, How to start a successful Meat processing business, How to Start Meat Processing Industry in India, How to Start Meat Processing Industry, Livestock Processing, Meat and Poultry, Meat Based Profitable Projects, Meat Based Small Scale Industries Projects, Meat cutting and packaging, Meat industry facts, Meat packing industry, Meat packing plants, Meat processing Business, Meat Processing Industry in India, Meat processing industry, Meat Processing Meat Industry Poultry, Meat processing process, Meat Processing Projects, Meat processing technology, Method of processing meat, Methods of processing and preservation of meat, Methods of processing meat and poultry, Methods Used to Make Processed Meat, Modern small and cottage scale industries, Most Profitable Meat Processing Business Ideas, Packaging of fresh and processed meat, Poultry and meat packaging, Processed Meat and Meat Preservatives, Processing Meat and Livestock, Processing of meat and meat products, Profit from Production Beef Processing, Profitable small and cottage scale industries, Profitable Small Scale Meat processing industry, Project for startups, Sausage making, Sausage Making: Formulation and Processing, Sausage Manufacturing, Sausage processing plant, Sausage production, Science of Poultry and Meat Processing, Setting up and opening your meat processing business, Small Scale Meat Processing, Small Scale Meat Processing Projects, Small scale Meat production line, Small scale sausage production, Small Start-up Business Project, Start up India, Stand up India, Starting a Meat Processing Business, Start-up Business Plan for Meat processing, Startup ideas, Startup Project, Startup Project for Meat processing, Startup project plan, Ways to Preserve Meat

Download or read book The Complete Technology Book on Meat Poultry and Fish Processing 2nd Revised Edition written by NPCS Board of Consultants & Engineers and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2013-01-01 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: India is endowed with the largest livestock population in the world. Livestock and poultry in Indian tropical and sub tropics play a critical role in agriculture economy by providing milk, meat, eggs etc and provide flexible reserves during period of economic stress and buffer against crop failure. Mutton and Chicken is an important livestock product which in its widest sense includes all those parts of the animals that are used as the food by the man. So, with increase in population there is also an increasing consumer demand for food products that are low in fat, salt and cholesterol at local, national and international levels. Food manufacturers need to be able to produce meat, poultry and fish products which are considered to be healthy and that can meet the consumer demands. Meat industry, although is a very developing stage in India, is the top food industry in the world. Processed meat products are poised for continuous growth in the country. Poultry is one of the fastest growing segments of the agricultural sector. The main aim of this book is to provide complete guide on meat, fish and poultry processing. Owing to the wide variety of products and type of processes and treatments (curing, dry curing, fermentation, cooking smoking etc), this products need particular analytical methodologies for proper consumption. It examines the nutritional principles behind the drive for reductions in fat, salt and cholesterol in our diet, and illustrates formulations and procedures utilized to produce such products. The reader would get to explore brief discussion regarding the Indian meat industry followed by the next chapter which includes structure, composition and nutritive value of meat tissues, postmortem changes and some meat quality parameters are also added in the preceding chapters. It also discuss about meat cutting and packaging, processing of meat and meat products, microbial and other deteriorative changes in meat and their identification, chemical composition and nutritive value of poultry meat, pre slaughter handling, transport and dressing of poultry, fish products, freezing fish fillets, miscellaneous fish dishes, spreads, salads, loaves fish spreads for appetizers, sandwiches, shellfish and miscellaneous marine products, meat removal and pre freezing treatment, packing and freezing, classes and sizes of fresh and frozen oysters, freezing whole raw lobsters etc. The book contains manufacturing processes of various meat, chicken and fish products in much illustrative manner. Special content on machinery equipment photographs along with supplier details has also been included. It is anticipated that, it turns out to be a resourceful book for entrepreneurs, technocrats, food technologists and others linked with this industry; as this would be an invaluable reference source for meat, poultry and fish processors, and food industry personnel involved in the development and marketing of new products.

Download or read book Handbook of Meat Processing written by Fidel Toldrá and published by John Wiley & Sons. This book was released on 2010-01-21 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook comprehensively presents the current status of the manufacturing of the most important meat products. Editor and renowned meat expert Fidel Toldrá heads an international collection of meat scientists who have contributed to this essential reference book. Coverage is divided into three parts. Part one, Technologies, begins with discussions on meat chemistry, biochemistry and quality and then provides background information on main technologies involved in the processing of meat, such as freezing, cooking, smoking, fermentation, emulsification, drying and curing. Also included are key chapters on packaging, spoilage prevention and plant cleaning and sanitation. Part two, Products, is focused on the description of the manufacture of the most important products, including cooked and dry-cured hams, cooked and fermented sausages, bacon, canned meat, paté, restructured meats and functional meat products. Each chapter addresses raw materials, ingredients and additives, processing technology, main types of products, production data, particular characteristics and sensory aspects, and future trends. Part three, Controls, offers current approaches for the control of the quality and safety of manufactured meat products, with coverage including sensory evaluation; chemical and biological hazards including GMOs; HACCP; and quality assurance. This book is an invaluable resource for all meat scientists, meat processors, R&D professionals and product developers. Key features: Unparalleled international expertise of editor and contributing authors Addresses the state of the art of manufacturing the most important meat products Special focus on approaches to control the safety and quality of processed meats Extensive coverage of production technologies, sanitation, packaging and sensory evaluation

Download or read book Handbook of Meat and Meat Processing Second Edition written by Y. H. Hui and published by CRC Press. This book was released on 2012-01-11 with total page 1003 pages. Available in PDF, EPUB and Kindle. Book excerpt: Retitled to reflect expansion of coverage from the first edition, Handbook of Meat and Meat Processing, Second Edition, contains a complete update of materials and nearly twice the number of chapters. Divided into seven parts, the book covers the entire range of issues related to meat and meat processing, from nutrients to techniques for preservation and extending shelf life. Topics discussed include: An overview of the meat-processing industry The basic science of meat, with chapters on muscle biology, meat consumption, and chemistry Meat attributes and characteristics, including color, flavor, quality assessment, analysis, texture, and control of microbial contamination The primary processing of meat, including slaughter, carcass evaluation, and kosher laws Principles and applications in the secondary processing of meat, including breading, curing, fermenting, smoking, and marinating The manufacture of processed meat products such as sausage and ham The safety of meat products and meat workers, including sanitation issues and hazard analysis Drawn from the combined efforts of nearly 100 experts from 16 countries, the book has been carefully vetted to ensure technical accuracy for each topic. This definitive guide to meat and meat products it is a critical tool for all food industry professionals and regulatory personnel.

Download or read book The Complete Technology Book on Processing Dehydration Canning Preservation of Fruits Vegetables Processed Food Industries 4th Revised Edition written by NIIR Board of Consultants & Engineers and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2019-10-18 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fruits and vegetables are processed into a variety of products such as juices and concentrates, pulp, canned and dehydrated products, jams and jellies, pickles and chutneys etc. The extent of processing of fruits and vegetables varies from one country to another. The technology for preservation also varies with type of products and targeted market. Owing to the perishable nature of the fresh produce, international trade in vegetables is mostly confined to the processed forms. India is the second largest producer of fruits & vegetables in the world with an annual production of million tonnes. It accounts for about 15 per cent of the world’s production of vegetables. Due to the short shelf life of these crops, as much as 30-35% of fruits and vegetables perish during harvest, storage, grading, transport, packaging and distribution. Hence, there is a need for processing technology of fruits and vegetables to cater the domestic demand. The major contents of the book are procedures for fruit and vegetable preservation, chemical preservation of foods, food preservation by fermentation, preservation by drying, canning fruits, syrups and brines for canning, fruit beverages, fermented beverages, jams, jellies and marmalades, tomato products, chutneys, sauces and pickles, vegetables preparation for processing, vegetable juices, sauces and soups, vegetable dehydration, freezing of vegetables etc. The book also contains sample plant layout and photographs of machinery with supplier’s contact details. A total guide to manufacturing and entrepreneurial success in one of today's most food processing industry. This book is one-stop guide to one of the fastest growing sectors of the food processing industry, where opportunities abound for manufacturers, retailers, and entrepreneurs. This is the only complete handbook on the commercial production of food processing products. It serves up a feast of how-to information, from concept to purchasing equipment.

Download or read book Principles of Meat Technology written by Vijay Singh and published by New India Publishing Agency. This book was released on 2015-09-15 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2nd edition of book entitled "Principles of Meat Technology" has been designed and modified as per the recent requirement of the Veterinary Professionals and is entirely based on recent course-curriculum of Veterinary Council of India. All the topics included in VCI syllabus for Meat Science subject have been illustrated and discussed in detail with the supplementation of previous edition. The reference material and current scientific information on the subject has been updated which will be of immense value for meat processing industry and persons having some stakes in this subject. This book is broadly covering fresh meat and aquatic foods, their processing, preservation, packaging, standards and biotechnological applications in this specialized field with recent innovations. In this edition book will serve the purpose of impartation of knowledge, skill and update material to acquaint the students of Veterinary Science. It is also due to upgradation of each and every of the book with recent knowledge and innovations. The themes mentioned in the syllabus of VCI is very well covered particularly meat structure, product's quality, handling and processing is very well documented. So authors believe that efforts put in this edition of book in form of material, scientific facts and language will help in understanding the meat science to the students of veterinary science, food science and technology, fish technology, meat technologists, academicians of this field, technicians engaged and the processors of animals and fish products.

Download or read book The Complete Book on Glass and Ceramics Technology 2nd Revised Edition written by NIIR Board of Consultants & Engineers and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2017-04-09 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramics also known as fire clay is an inorganic, non-metallic solid article, which is produced by the art or technique of heat and subsequent cooling. The ceramics industry in India came into existence about a century ago and has matured over time to form an industrial base. From traditional pottery making, the industry has evolved to find its place in the market for sophisticated insulators, electronic and electrical items. The ceramic industry has been modernizing continuously, by newer innovations in product design, quality etc. Glass is an inorganic product typically produced by melting a mixture of silica, soda and calcium compound with desired metallic oxides that serves as coloring agents. Indian glass industry will increase on the sidelines of real estate growth across retail, residential and office estate. Glass production involves the fusion of several inorganic substances. These various substances include products such as silica sand, soda ash, dolomite and limestone, representing together 99% of all the raw materials, excluding recycled glass. Glass-ceramics are mostly produced in two steps: First, a glass is formed by a glass-manufacturing process. The glass is cooled down and is then reheated in a second step. In this heat treatment the glass partly crystallizes. In most cases nucleation agents are added to the base composition of the glass-ceramic. These nucleation agents aid and control the crystallization process. Glass-ceramics are fine-grained polycrystalline materials formed when glasses of suitable compositions are heat treated and thus undergo controlled crystallization to the lower energy, crystalline state. It is important to emphasize a number of points in this statement on glass ceramics.Glass ceramics has helped the electronics industry build much smaller and highly efficient transistors, leading to advances in all types of devices. The book covers almost all important aspects of Glass and Ceramic Industry: Properties, Applications, Manufacturing, Processing and Photographs of Plant &Machinery with Supplier’s Contact Details. The major contents of the book are types of glasses, silicate glasses, boric oxide and borate glasses, phosphorus pentoxide and phosphate glasses, germanium dioxide and germanate glasses, titanate glasses, nitrate glasses, glasses based on water, halide glasses, modern glass working, monax and pyrex glass, electric welding, photo electric cells, glassy metals, analysis of glass, glass ceramics, ceramics as electrical materials, analysis of ceramics etc. The book will be useful to the consultants, technocrats, research scholars, libraries and existing units and new entrepreneurswho will find a good base to work further in this field.

Download or read book The Complete Book on Ginger Cultivation and Manufacture of Value Added Ginger Products Ginger Storage Ginger Oil Ginger Powder Ginger Paste Ginger Beer Instant Ginger Powder Drink and Dry Ginger from Green Ginger written by NPCS Board of Consultants & Engineers and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ginger is the common name for Zingiber officinale, which was originally cultivated in China and now equally spread around the world. Ginger is a herb but is often known as a spice, with a strong distinct flavor that can increase the production of saliva. The part that is used as spice on the plant itself is the rhizomes or ginger root. This ginger root is traditionally used with sweet foods in Western cuisine being included in popular recipes such as ginger ale, gingerbread, ginger biscuits and ginger cake. It is also used in many countries as a medicinal ingredient which many believe in. Historically, ginger has a long tradition of being very effective in alleviating symptoms of gastrointestinal distress. In herbal medicine, ginger is regarded as an excellent carminative and intestinal spasmolytic. Modern scientific research has revealed that ginger possesses numerous therapeutic properties including antioxidant effects, an ability to inhibit the formation of inflammatory compounds, and direct anti-inflammatory effects. India is the leading producer of ginger oil and dominates the ginger oil market with almost half shares out of total market. China is also known for ginger production and trade of ginger oil. Asia Pacific mainly exports ginger oil to North America and European markets. Increasing number of health conscious consumers, and their demands for natural oils and extracts based products is the major factor driving growth for essential oils and in turn ginger oil market. Ginger is majorly used in spices and thus ginger oils and oleoresins are preferred to prepared dried spices as flavoring in food industry, because they are more stable, contamination free, cleaner and can be easily standardized by blending. Thus the growth of food industry and spices demand are another factors driving growth of ginger oil market. The growth of natural personal care products industry is another growth driver for ginger oil market. The major content of the book are Ginger Cultivation, Farm and Forestry Production for Ginger, Diseases & Pest Management in Ginger, Medicinal Values of Ginger, Active Ingredients of Ginger, Pharmacological Activity of Ginger, Ginger Storage, Ginger Processing, Ginger Oleoresin, Ginger Oil, Ginger Beer, Ginger Powder, Ginger Paste, Instant Ginger Powder Drink, Ginger Candy, Dry Ginger from Green Ginger, Extraction of Ginger Oleoresin from Ginger-Root Using Co2,Production of Ginger Rhizome by Shoot-Tip Culture, Extraction of Essential Oils from Ginger Rhizome Using Steam Distillation Method, Packaging and Labelling BIS Specifications, Good Manufacturing Practices, Sample Plant Layouts, Photoraphs of Machinery with Suppliers Contact Details. This book will be a mile stone for its readers who are new to this sector, will also find useful for professionals, entrepreneurs, those studying and researching in this important area.

Download or read book The Complete Technology Book on Textile Spinning Weaving Finishing and Printing 3rd Revised Edition written by NIIR Board of Consultants & Engineers and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2017-09-09 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Textile industry is one of the few basic industries, which is characterised as a necessary component of human life. One may classify it as a more glamorous industry, but whatever it is, it provides with the basic requirement called clothes. Spinning is the process of converting cotton or manmade fibre into yarn to be used for weaving and knitting. Weaving is a method of textile production in which two distinct sets of yarns or threads are interlaced at right angles to form a fabric or cloth. Finishing refers to the processes that convert the woven or knitted cloth into a usable material. Printing is the process of applying colour to fabric in definite patterns or designs. The textile industry occupies an important position in the total volume of merchandise trade across countries. Developing countries account for little over two-third of world exports in textiles and clothing. It is the second largest employer after agriculture, providing employment to over 45 million people directly and 60 million people indirectly. The future for the textile industry looks promising, buoyed by both strong domestic consumption as well as export demand. This book is based on the latest technology involved in textile industry, which describes the processes available at the spinning and fabric forming stages coupled with the complexities of the finishing and colouration processes to the production of wide ranges of products. The major contents of the book are dyeing of textile materials, principles of spinning, process preparatory to spinning, principles of weaving, textile chemicals, yarn preparation, weaving and woven fabrics, knitting and knit fabrics, nonconventional fabrics, cellulosics, mixed fibers, printing compositions, printing processes, transfer dyes, transfer inks etc. It describes the manufacturing processes and photographs of plant & machinery with supplier’s contact details. It will be a standard reference book for professionals, entrepreneurs, textile mill owners, those studying and researching in this important area and others interested in the field of textile industry.

Download or read book The Complete Book on Waste Treatment Technologies Industrial Biomedical Water Electronic Municipal Household Kitchen Farm Animal Dairy Poultry Meat Fish Sea Food Industry Waste written by Prof. Dr. Mahendra Pal and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2015-01-11 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Waste management is a global problem that continues to increase with rapid industrialization, population growth, and economic development. As the world hurtles towards the urban future, the amount of Municipal Solid Waste (MSW) is growing very fast. Wastes are generally classified into solid, liquid, & gaseous and are broadly classified as household waste; municipal waste; commercial and non-hazardous industrial wastes; hazardous (toxic) industrial wastes; construction and demolition waste; health care wastes – waste generated in health care facilities (e.g. hospitals, medical research facilities); human and animal wastes; and incinerator wastes. The fast industrialization, urbanization, modern technology, and rapidly growing population in India have posed a serious challenge to the waste management. In India, per capita generation rate of municipal solid waste ranges from 0.2 to 0.5 kg/day. At present, the daily generation rate in South Asia, East Asia and the Pacific combined is approximately 1.0 million tons per day. Hazard management is essentially a problem solving process aimed at defining problems (identifying hazards), gathering information about them (assessing the risks) and solving them (controlling the risks). Integrated solid waste management is a comprehensive waste prevention, recycling, composting, and disposal programme. Disposing the waste in an environmentally friendly manner is highly crucial to all the nations of the world including India. The goal of urban solid waste management is to collect, treat and dispose of solid waste generated by the all the city dwellers in an environmentally, and socially satisfactory manner by using the most economical methods available. The major contents of the book are types of waste, human pathogens in animal agriculture production systems, pathogen reductions during waste treatment, aerosolization of pathogens etc. It will be a standard reference book for professionals, entrepreneurs, students, teachers, researchers, administrators, and planners of various disciplines who are directly or indirectly involved in the waste management. TAGS Best small and cottage scale industries, Better waste management, Biological Waste treatment techniques, Bio-medical Waste Management, Biomedical Waste treatment, Anaerobic lagoon techniques, Book about Waste Management, Book on Waste Management, Business guidance for Waste treatment, Chemical industry wastewater treatment, Dairy Waste treatment, Electronic Waste treatment, E-waste Management, E-Waste Management & Clean Technologies Treatment of E-waste for Safe Disposal, E-Waste Recycling Technologies, Farm Animal Waste treatment, Guidelines for Livestock Waste Management, Household Waste treatment, How to compost kitchen waste, How to make money from waste management, How to Start a Recycling Business - Opportunities & Ideas, How to start a successful Waste treatment business, How to start a waste disposal business, How to Start a Waste treatment Business, How to start waste management business in India, How to Start Waste treatment Industry in India, Industrial & Municipal Wastewater Treatment Processes, Industrial Waste Treatment book, Industrial Waste treatment, Industrial wastewater treatment, Is it a good idea to start up a waste management?, Kitchen waste management, Kitchen Waste treatment, Latest waste management technologies, Livestock Farm Waste treatment, Livestock waste disposal and management, Livestock waste treatment systems, Meat, Fish & Sea Food Industry Waste treatment, Modern waste management technologies, Most Profitable Waste treatment Business Ideas, Municipal Waste treatment, New small scale ideas in Waste treatment industry, Opening a Waste Management Business, Physical Waste treatment techniques, Poultry Waste treatment, Recycling and Treatment of E-waste, Setting up and opening your Waste treatment Business, Small Scale Waste treatment Projects, Solid waste treatment, Solid waste treatment methods, Solid waste treatment technologies, Starting a Waste Management Business, Starting a Waste treatment Business, Start-up Business Plan for Waste treatment, Start up Project for Waste treatment, Technology of Waste Management, Technology of Waste Treatment, Treatment and disposal of municipal waste, Treatment of Bio-Medical Waste, Treatment of kitchen waste, Waste disposal business plan, Waste Management & Processing Solutions, Waste Management and Recycling, Waste Management and Recycling Technology, Waste management business ideas, Waste management business opportunities, Waste management business plan, Waste Management Startups in India, Waste Recycling Business in India Business Plan, Waste Treatment and Disposal Methods, Waste treatment and waste disposal methods, Waste treatment Based Profitable Projects, Waste treatment Based Small Scale Industries Projects, Waste treatment Business, Waste treatment Industry in India, Waste treatment methods, Waste treatment process, Waste treatment Projects, Waste treatment technologies, Water Waste treatment, What is Waste Management and Methods of Waste Disposal?, What is waste treatment?

Download or read book The Complete Book on Coconut Coconut Products Cultivation and Processing written by NIIR Board of Consultants and Engineers and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2006-10-01 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coconut is one of the oldest crops grown in India and presently covers 1.5 million hectares in this country. Found across much of the tropic and subtropical area, the coconut is known for its great versatility as seen in the many domestic, commercial, and industrial uses of its different parts. Coconuts are part of the daily diet of many people. Its endosperm is initially in its nuclear phase suspended within the coconut water. As development continues, cellular layers of endosperm deposit along the walls of the coconut, becoming the edible coconut flesh. When dried, the coconut flesh is called copra. The oil and milk derived from it are commonly used in cooking and frying; coconut oil is also widely used in soaps and cosmetics. The clear liquid coconut water within is a refreshing drink and can be processed to create alcohol. The husks and leaves can be used as material to make a variety of products for furnishing and decorating. It also has cultural and religious significance in many societies that use it. India stands third in the production of coconut in the world. There are only two distinguishable varieties of coconut; the tall and the dwarf. As a result of cross pollination in the tails, a wide range of variations occur within the same variety. Coconut based cropping/farming systems promote on farm diversity and strengthens ecological base of coconut farming. Coconut husk is the raw material for the coir industry. It is also used as a domestic fuel and as a fuel in copra kilns. Coconut oil comes under edible/industrial group, is used as cooking oil, hair oil, massage oil and industrial oil. It is dominated by saturated fats and high percentage of lauric acid. India accounts for the 18% of total coconut production in the world and it is the third largest coconut producing country in the world. Coconut processing adds value, and a number of products like coconut oil, desiccated coconut, coir fibre, pith, mattresses, desiccated coconut (DC), coconut cream, coconut milk, spray dried coconut milk powder, coconut shell products, shell charcoal, shell powder, virgin coconut oil are obtained. The demand for coconut oil increases 15 to 20 % during the festival season. Coconut oil for edible purposes is now being claimed to be the second best edible oil in the world, after Olive oil. Coconut shell charcoal is most widely used as domestic and industrial fuel. Some of the fundamentals of the book are product diversification in coconut, future of coconut oil, scope for product diversification, varieties of coconut, farming systems in coconut, organic farming of coconut, spices and herbs, establishment and maintenance of organic coconut plantations, production of organic spices, medicinal and aromatic plants along with coconut, crop improvement, green manuring in coconut garden organic recycling in coconut, soil moisture conservation in coconut garden, harvest and post harvest technology, integrated farming in coconut holdings for productivity improvement, machinery and processing of desiccated coconut, coconut processing sector in India, etc. Coconut plays an important role in the economic, social and cultural activities of millions of people in our country. India is a major producer of coconut in the world. Coconut provides food, edible oil, industrial oil and health drink to humanity. All parts of coconut tree is useful in one way or other and the crop profoundly influences the socio economic security of millions of farm families. The present book contains the methods of cultivation and processing of coconut. This book is very beneficial for agriculturist, researchers, professionals, entrepreneurs, agriculture universities etc. TAGS Activated carbon from coconut shells, Automatic copra manufacturing unit, Best small and cottage scale industries, Book all about coconut processing, Business guidance for coconut processing, Coconut Based Small Scale Industries Projects, Coconut business ideas, Coconut By products, Coconut Cream, Coconut cultivation in India, Coconut cultivation technology, Coconut farming Business, Coconut farming profit, Coconut Industry in India, Coconut kernel products, Coconut Milk, Coconut Milk and Milk Products, Coconut Oil extraction process, Coconut Oil Manufacturing, Coconut Oil Production Business Plan, Coconut plantation management, Coconut Processing & Coconut Based Profitable Projects, Coconut Processing Business, Coconut processing industry, Coconut Processing Industry in India, Coconut Processing Projects, Coconut processing sector in India, Coconut processing technology, Coconut processing unit is established, Coconut Production Technology Book, Coconut Shell Charcoal, Coconut Spray Dried Milk Powder, Coconut-based Food Processing Plant, Coir and Coir Products, Coir Pith Composting, Commercial products from coconut, Desiccated Coconut, Food products from coconut, Get started in small-scale food manufacturing, Great Opportunity for Startup, Handicrafts from Coconut, How to plant a coconut tree, How to Start a Coconut farming and Processing?, How to Start a Coconut Oil Production, How to start a coconut plantation, How to Start a Coconut Production Business, How to start a successful Coconut processing business, How to start a Virgin Coconut Oil Business, How to Start Coconut Processing Industry in India, Integrated coconut processing plant, Manufacturing of Coconut based Products, Mature coconut, Most Profitable Coconut Processing Business Ideas, New small scale ideas in Coconut processing industry, Organic farming of coconut, Organic farming of spices and herbs, Planting and Management of Coconut Plantations, Process technology books on coconut cultivation and processing, Processing of Coconut, Processing of desiccated coconut, Production Technology of Coconut, Profitable Small Scale coconut by products manufacturing, Recycling of Organic Wastes from Coconut Palm, Setting up and opening your Coconut Processing Business, Setting up of Coconut Processing Units, Shell Flour, Small Scale Coconut Processing Projects, Small scale Coconut production line, Spray Dried Coconut Milk Powder, Starting a Coconut Processing Business, Start-up Business Plan for Coconut Processing, Startup Project for coconut cultivation and processing, Utilization of matured coconut water, Vermicomposting, Vinegar fermentation, Virgin Coconut Oil

Download or read book Petroleum Petroleum Products Technology Handbook written by NPCS Board of Consultants & Engineers and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2019-05-04 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum asphalt is a sticky, black and highly viscous liquid or semi-solid that is present in most petroleum crude oils and in some natural deposits. Petroleum crude oil is a complex mixture of a great many different hydrocarbons. Refined petroleum products are derived from crude oils through processes such as catalytic cracking and fractional distillation. Refining is a necessary step before oil can be burned as fuel or used to create end products. Residual fuel oil is a complex mixture of hydrocarbons prepared by blending a residuum component with a flux stock which is a distillate component diluent, to give the desired viscosity of the fuel oil produced.Petroleum refining is the process of separating the many compoundspresent in crude petroleum.An Oil refinery or petroleum refinery is an industrial process plant wherecrude oil is processed and refined into more useful products The global Petroleum Asphalt market is valued at USD 48.8 Billion in 2017 and is expected to reach USD 77.67 Billion by the end of 2024, growing at a Growth Rate of 6.87% between 2017 and 2024.The global bunker fuel market was valued at $137,215.5 million in 2017 and is expected to reach $273,050.4 million by 2025, registering a CAGR of 9.4% from 2018 to 2025. Some of the fundamentals of the book are composition of radiation effects on lubricants, thermal cracking of pure saturatedhydrocarbons, petroleum asphalts, refinery products, refinery feedstocks, blending and compounding, oil refining, residual fuel oils, distillate heating oils, formulations of petroleum, photographs of machinery withsuppliers contact details. A total guide to manufacturing and entrepreneurial success in one of today's most lucrative petroleum industry. This book is one-stop guide to one of the fastest growing sectors of the petroleum industry, where opportunities abound for manufacturers, retailers, and entrepreneurs. This is the only complete handbook on the commercial production of petroleum products. It serves up a feast of how-to information, from concept to purchasing equipment.

Download or read book The Science of Animal Growth and Meat Technology written by Steven M. Lonergan and published by Academic Press. This book was released on 2018-10-27 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Science of Animal Growth and Meat Technology, Second Edition, combines fundamental science- based and applied, practical concepts relating to the prenatal and postnatal growth of cattle, sheep and pigs. It provides the necessary components to understand the production and growth of livestock for safe and quality meat products and presents an understanding of the principles of meat science and technology that is needed to understand the meat industry. Information on the slaughter process of animals, muscle structure and meat tenderness, meat quality, meat safety, and microbiology makes this a valuable self-study reference for students and professionals entering the field. Describes principles in muscle metabolism, meat quality and meat safety using case studies Discusses the microbial safety of meat products, primary pathogens of concern, and pathogen detection Offers solutions on how to control bacterial growth to improve the safety and quality of meat Presents a new chapter on packaging for meat and meat products that focuses on flexible film technology, packaging materials and equipment technology Includes new information on inspection systems prior to slaughter, during slaughter, and the inspection of meat processing systems

Download or read book Epoxy Resins Technology Handbook Manufacturing Process Synthesis Epoxy Resin Adhesives and Epoxy Coatings 2nd Revised Edition written by Dr. H. Panda and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2019-04-19 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Epoxy is a term used to denote both the basic components and the cured end products of epoxy resins, as well as a colloquial name for the epoxide functional group. Epoxy resin are a class of thermoset materials used extensively in structural and specialty composite applications because they offer a unique combination of properties that are unattainable with other thermoset resins. Epoxies are monomers or prepolymers that further reacts with curing agents to yield high performance thermosetting plastics. They have gained wide acceptance in protecting coatings, electrical and structural applications because of their exceptional combination of properties such as toughness, adhesion, chemical resistance and superior electrical properties. Epoxy resins are characterized by the presence of a three membered cycle ether group commonly referred to as an epoxy group 1,2-epoxide, or oxirane. The most widely used epoxy resins are diglycidyl ethers of bisphenol-A derived from bisphenol-A and epichlorohydrin. The market of epoxy resins are growing day by day. Today the total business of this product is more than 100 crores. Epoxy resins are used for about 75% of wind blades currently produced worldwide, while polyester resins account for the remaining 25%. A standard 1.5-MW (megawatt) wind turbine has approximately 10 tonnes of epoxy in its blades. Traditionally, the markets for epoxy resins have been driven by demand generated primarily in areas of adhesives, building and civil construction, electrical insulation, printed circuit boards, and protective coatings for consumer durables, amongst others. The major contents of the book are synthesis and characteristics of epoxy resin, manufacture of epoxy resins, epoxide curing reactions, the dynamic mechanical properties of epoxy resins, physical and chemical properties of epoxy resins, epoxy resin adhesives, epoxy resin coatings, epoxy coating give into water, electrical and electronic applications, analysis of epoxides and epoxy resins and the toxicology of epoxy resins. It will be a standard reference book for professionals and entrepreneurs. Those who are interested in this field can find the complete information from manufacture to final uses of epoxy resin. This presentation will be very helpful to new entrepreneurs, technocrats, research scholars, libraries and existing units.

Download or read book Handbook on Drying Milling and Production of Cereal Foods written by NIIR Board of Consultants & Engineers and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2017-10-09 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cereals, or grains, are members of the grass family cultivated primarily for their starchy seeds (technically, dry fruits).Cereal grains are grown in greater quantities and provide more food energy worldwide than any other type of crop; they are therefore staple crops. Oats, barley, and some food products made from cereal grains. They are used for both human and animal food and as an industrial raw material. India produces cereals like wheat, rice, barley (jau), buckwheat, oats, corn (maize), rye, jowar (sorghum), pearl millet (bajra), millet (ragi), Sorghum, Triticale, etc. India is the world's second largest producer of Rice, Wheat and other cereals. The huge demand for cereals in the global market is creating an excellent environment for the export of Indian cereal products. India is not only the largest producer of cereal as well as largest exporter of cereal products in the world. India have been offering incredible opportunities as they have an abundant amount of raw materials and a wide availability of cheap labor. The book provides comprehensive coverage of the Drying, Milling and information regarding production method of Cereal Foods .It also covers Plant Layout, Process Flow Sheets and photographs of plant & Machinery with supplier’s contact details. Some of the fundamentals of the book are origin of wheat classification of wheat, endeavors to find industrial uses for wheat, criteria of wheat quality, botanical criteria of quality, milling principles, extraction rate and its effect on flour composition, grain structure as affecting grinding, definition of flour extraction stone milling: yields of products, roller milling: flour extraction rates, rice production and utilization, origin of rice, comparison of rice with other cereal grains, composition of rice and cereal, breeding rice varieties with specific, industrial uses for rice and rice by products, caryopsis and composition of rice, gross structure of the rice caryopsis and its milling fractions etc. This book is essential for those who are interested in cereal areas can find the complete information from manufacture to final uses of Cereal Foods. The present time is an era of information, one should know about what is happening in the world to be able to compete effectively. It will be very informative and useful to consultants, new entrepreneurs, startups, technocrats, research scholars, libraries and existing units.

Download or read book Lubricating Oils Greases and Petroleum Products Manufacturing Handbook written by NPCS Board of Consultants & Engineers and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2018-01-12 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lubricating oils are specially formulated oils that reduce friction between moving parts and help maintain mechanical parts. Lubricating oil is a thick fatty oil used to make the parts of a machine move smoothly. The lubricants market is growing due to the growing automotive industry, increased consumer awareness and government regulations regarding lubricants. Lubricants are used in vehicles to reduce friction, which leads to a longer lifespan and reduced wear and tear on the vehicles. The growth of lubricants usage in the automotive industry is mainly due to an increasing demand for heavy duty vehicles and light passenger vehicles, and an increase in the average lifespan of the vehicles. As saving conventional resources and cutting emissions and energy have become central environmental matters, the lubricants are progressively attracting more consumer awareness. Greases are made by using oil (typically mineral oil) and mixing it with thickeners (such as lithium-based soaps). They may also contain additional lubricating particles, such as graphite, molybdenum disulfide, or polytetrafluoroethylene (PTFE, aka Teflon). White grease is made from inedible hog fat and has a low content of free fatty acids. Yellow grease is made from darker parts of the hog and may include parts used to make white grease. Brown grease contains beef and mutton fats as well as hog fats. Synthetic grease may consist of synthetic oils containing standard soaps or may be a mixture of synthetic thickeners, or bases, in petroleum oils. Silicones are greases in which both the base and the oil are synthetic. Asia-Pacific represents the largest and the fastest growing market, with volume sales projected to grow at a CAGR of 5% over the analysis period. Automotive lubricants represents the largest product market, with engine oils generating a major chunk of the revenues. The market for industrial lubricants is supported by the huge demand for industrial engine oils and growing consumption of process oils. The major content of the book are Food and Technical Grade White Oils and Highly Refined Paraffins, Base Oils from Petroleum, Formulation of Automotive Lubricants, Lubricating Grease, Aviation Lubricants, Formulation and Structure of Lubricating Greases, Marine Lubricants, Industrial Lubricants, Refining of Petroleum, Lubricating Oils, Greases and Solid Lubricants, Refinery Products, Crude Distillation and Photographs of Machinery with Suppliers Contact Details. This book will be a mile stone for its readers who are new to this sector, will also find useful for professionals, entrepreneurs, those studying and researching in this important area.

Download or read book Handbook on Electroplating with Manufacture of Electrochemicals Electroplating of Aluminium Cadmium Chromium Cobalt Copper Gold Iron Lead Nickel Bright Nickel Silver Alloy Platinum Palladium Rhodium Bright Zinc Tin Plastics Barrel Electroless Plating Metal Treatment with Formulation Machinery Equipment Details and Factory Layout written by Dr. H. Panda and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2024-01-01 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electroplating and Electrochemicals, industries shimmering with growth and profitability potential, are truly riveting. Electroplating, an intricate process, involves the electrodeposition of a svelte metallic stratum onto diverse substrates utilizing electric currents. This technique entails submerging the intended object, the substrate, into an electrolytic bath brimming with metal ions and, through the application of an electric current, achieves a homogeneous metallic veneer. Conversely, Electrochemicals are birthed from electrochemical reactions. These intricate reactions are characterized by the transference of electrons among distinct compounds within an electrolytic milieu. Through the deliberate orchestration of electron flow, a plethora of chemical reactions are catalyzed, culminating in the synthesis of targeted chemicals. This methodology finds its application across a spectrum of industries, encompassing pharmaceuticals, agriculture, and energy storage sectors. The global electroplating market is expected to grow at a CAGR of 5.5%. The growth in the market can be attributed to the increasing demand for electroplated products from various end-use industries, such as automotive, electrical & electronics, aerospace & defense, Jewellery and machinery parts & components. In addition, the growing awareness about corrosion protection and decorative finishes is also propelling the growth of this market. This book contains in-depth information about Electrochemical Processing, Metal Surface Treatment, Electroless Plating, Electroplating, Electroplating of Aluminium, Cadmium, Chromium, Cobalt, Copper, Gold, Iron, Lead, Nickel, Bright Nickel, Silver, Alloy, Platinum, Palladium, Rhodium, Bright Zinc, Tin, Plastics, Barrel, Zinc Electroplating Brightener, Metal Treatments, Electrodeposition of Precious Metals, Electropolishing of Stainless Steel, Case Hardening, Electroless Coating of (Gold, Silver), Buffing and Industrial Metal Polishing Compounds, Aluminium, Gold and Its Compounds, Complex Salts of (Copper, Silver and Gold), Hydrides of Silicon, Chemical and Electrochemical Conversion Treatments, Electrostatic Sealing. This book is an invaluable resource that comprehensively addresses all the essential topics in Electroplating and Electrochemicals. It is poised to become a standard reference for professionals and entrepreneurs interested in this field, offering a comprehensive understanding of Electroplating. Additionally, it will prove highly beneficial to consultants, new entrepreneurs, technocrats, research scholars, libraries, and existing businesses. The book offers a detailed roadmap that guides readers from the initial concept to the machinery acquisition phase.