Download or read book The Compact Lathe written by Stan Bray and published by Specialist Interest Model Books Limited. This book was released on 2004 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: The evolution of the compact, or portable, lathe has bought many a model engineer's life-long ambition to reality. This comprehensive introduction to the subject covers the technology, the machine operations and facilities which will enable the novice or experienced operator to achieve the highest standards of lathe work.
Download or read book The Mini lathe written by David Fenner and published by Workshop Practice. This book was released on 2009-02-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Workshop Practices.
Download or read book Mini Lathe written by Neil M Wyatt and published by Crowood. This book was released on 2016-03-31 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mini-lathe is a useful tool in the model engineer's workshop. With more choice than ever of more compact machines, a mini-lathe is able to accommodate a wide range of engineering requirements, projects and techniques, as well as being suitable for the novice engineer and for those with limited workshop space. Author and model engineer Neil Wyatt provides a practical guide to purchasing and using a mini-lathe, as well as examining more advanced techniques. The book includes a projects section to show the application of mini-lathe techniques. Topics covered include: choosing a mini-lathe; workshop safety and setting up the lathe; basic through to more advanced machining skills; modifications, additions and tuning of the mini-lathe. This essential reference source is aimed at the novice engineer, home metalworkers and for those with limited workshop space. Fully illustrated with 304 colour photographs.
Download or read book Mini Lathe for Home Machinists written by David Fenner and published by Fox Chapel Publishing. This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mini-Lathe for Home Machinists explains the different parts of the mini-lathe and shows how they can be used to complete different projects. Author David Fenner covers all the basics, from safety and materials, setting up, and tuning the machine to using accessories and performing a full range of essential tasks. Also included are detailed instructions and hundreds of illustrations for making useful components like shafts, bushings, spindles, part-off tools, DRO handwheels, and a radius turning attachment. A complete course on using and improving the new generation of budget lathes, this book is a perfect choice for beginners as well as for those who are experienced with the lathe, but have never tried the mini-lathe.
Download or read book Mini Lathe Magic written by Ron Hampton and published by Schiffer Craft. This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: With clear, concise instructions and 345 detailed photos, Ron Hampton takes the reader through every step required to turn and finish works of art from wood on the mini-lathe. Eight separate projects include a goblet, mushrooms, bowls, and pots. A gallery of other designs is provided for inspiration. This book is perfect for the beginning and intermediate wood turner, and will provide valuable ideas for those more advanced.
Download or read book Mini lathe Tools Projects for Home Machinists written by David Fenner and published by . This book was released on 2018 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book follows on from the author's introduction to the mini-lathe (Mini-Lathe for Home Machinists by David Fenner, also available from Fox Chapel Publishing) and presents a series of projects that will help to extend the versatility of small metal lathes.
Download or read book Metal Lathe for Home Machinists written by Harold Hall and published by Fox Chapel Publishing. This book was released on 2014-10-01 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: · An introduction and project-based course to the lathe and lathe metalworking · Contains 12 projects that start with basic tasks and progress into advanced skills · Projects are heavily illustrated with drawings and photographs · Great practice for both beginners and experienced lathe owners
Download or read book Mini lathe Tools and Projects written by David Fenner and published by Special Interest Model. This book was released on 2011-11-01 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete course on using and improving this new generation of budget lathes. It explains everything from setting up and tuning the machine for best performance to using accessories and carrying out tasks.
Download or read book Tabletop Machining written by Joe Martin and published by . This book was released on 1998-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical perspective on equipment and processes with instruction for many projects shown.
Download or read book Metal Turning on the Lathe written by David A Clark and published by Crowood. This book was released on 2013-08-31 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: The lathe is an essential tool for all but the most basic of workshops. It enables the engineer to produce turned components to a high degree of accuracy. Often called the 'king of machine tools', it is also very versatile and can be used to make a wide range of engineering components. This new book shows you how to make full use of your lathe safely and effectively in your workshop. Topics covered include: A guide to choosing a lathe looking at different sizes and features available; Advice on installing and maintaining a lathe, selecting and sharpening tools, and working with chucks; Instruction on a range of techniques ranging from how to hold work in a collet through to cutting a screw thread. A new and practical guide to this essential tool, the lathe, aimed at both the aspiring and experienced engineers, modelmakers and horologists, Metal Turning on the Lathe gives advice on choosing, installing, maintaining and using a lathe safely and effectively in your workshop and is superbly illustrated with 239 colour illustrations. David Clark has spent over 30 years in the engineering industry and is the editor of Model Engineer and Model Engineers' Workshop.
Download or read book The Metal Lathe written by David J. Gingery and published by David J. Gingery Publishing, LLC. This book was released on 2014-07-11 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using castings from your charcoal foundry (see Book 1 in the series: The Charcoal Foundry by David Gingery) and simple hand methods (no machine tools needed!) you can build a sturdy and accurate bed for a metal lathe. Then additional castings, common hardware items and improvised equipment will add the headstock, tailstock, carriage and all the remaining parts to complete the lathe. Illustrated with photos and drawings to show you all you need to know about patterns, molding, casting and finishing the parts. The lathe specs. include a 7" swing over the bed and 12" between centers. Adjustable tailstock with set-over for taper turning. Adjustable gibs in sliding members and adjustable sleeve bearings in the headstock. A truly practical machine capable of precision work. Once you have a foundry to cast the parts and a lathe to machine them you can tackle more exotic projects.
Download or read book Projects for the Mini Lathe written by Dick Sing and published by Schiffer Publishing. This book was released on 2002-01-01 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: Step-by-step instructions show woodturners how to make small decorative magnets, bolo tie slides with matching earrings, switch knobs that attach to lamps, and handy little brushes. Dick illustrates techniques for holding your work piece, the use of concentric and offset inlays, and how to add embellishments like beads, contours, chatterwork, and captive rings. These are small projects that are big on fun and flair.
Download or read book How to run a lathe written by John Joseph O'Brien and published by . This book was released on 1944 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book How to Run a Lathe The Care and Operation of a Screw Cutting Lathe written by John Joseph O'Brien and Miles William O’Brien and published by Ravenio Books. This book was released on 2015-08-09 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Make Your Own Treadle Lathe written by Steve Schmeck and published by . This book was released on 2014-01-25 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: Full color paperback edition. This title is also available as a B&W 'workshop-friendly' paperback edition and as a Kindle eBook."Make Your Own Treadle Lathe" is a practical, step by step guide to building a foot-powered lathe for light duty wood turning. You can build your own treadle lathe by following the well illustrated steps presented in this compact book. The book covers: - Materials & components - Frame and headstock - Belt and tensioner - Tailstock - Tool rest - Flywheel - Using the lathe The author also provides information on some non-turning uses for the lathe and sources for, and some shop-made alternatives to, the parts you may not have. All of the wood needed to build your lathe can be found at the local lumber yard or home center. Use 'Make Your Own Treadle Lathe' to make a near-duplicate of the author's lathe or as inspiration to build the unique human-powered lathe of your dreams. -------------- From the Introduction... Why this book exists: During the twenty years or so since I built this foot-powered treadle lathe, I have received many requests for drawings or plans. The lathe has been used as part of our traditional woodworking demonstrations and it never fails to draw a crowd. Of course, the reason the lathe exists is because I felt a need for it as a tool. Design considerations: Some of the main considerations when designing the lathe were: * Human powered - our solar energy system was pretty small at the time * Size - it had to be less than 42" tall to fit into our old truck * Compact - since it would sit in our small shop most of the time, a small footprint was essential * Portable - as in not too cumbersome or heavy * Functional - it had to perform the basic duties of a light-duty lathe * Adaptable - I had in mind several non-traditional uses for the tool, such as sanding --------------- Many unique and usable lathes have been built using earlier editions of this book. This book provides you with the instructions, photos and illustrations, and inspiration to build your own treadle lathe!
Download or read book Screwcutting in the Lathe written by Martin Cleeve and published by ArgusBooks. This book was released on 1984 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses the screwcutting function of the lathe, its ability to cut any form of external or internal thread of any thread form, pitch or diameter within the overall capacity of the machine.
Download or read book Wood Lathe Projects for Fun and Profit written by Dick Sing and published by Schiffer Pub Limited. This book was released on 1994 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: Four wood lathe projects, easy enough for the beginner and fun enough for everyone. With step-by-step instructions illustrated with clear full-color photographs, Dick Sing turns a clock holder, a candle dish, a desk set with a base, a pen, and a letter opener, and a bookmark. Each project is covered completely, including numerous tips on style and finishing techniques.
