Download or read book The Colloidal Chemistry Synthesis and Electron Microscopy Characterization of Shape controlled Metal and Semiconductor Nanocrystals written by Adam Biacchi and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Solution methods of materials synthesis have found application in a variety of fields due to the diversity of products accessible, facility of process scalability, and the ease of tuning their properties through prudent selection of reaction conditions. Control of experimental variables during the formation of colloidally stable nanoscale solids within a liquid matrix allows for tailoring of the particles' characteristics, including shape, size, composition, and surface chemistry. In this dissertation, I will discuss how the manipulation of reaction chemistries can be used to synthesize shape-controlled metal and semiconductor colloidal nanocrystals. Further, I will elaborate on the mechanisms by which these particles form from molecular precursors and describe how their properties can differ from their bulk analogues through extensive characterization, especially using transmission electron microscopy. These studies contribute to the continued development of chemical routes to nanocrystals and their application as functional materials.First, I will review recent advances in the synthesis and characterization of shape-controlled nanocrystals, as well as highlight their promising applicability in a number of emerging technologies. These principles will then be leveraged to the specific case of catalytically-active rhodium nanocrystals, which can be synthesized with morphological and dimensional control using a polyol solution-mediated strategy. I describe an innovative shape-controlled synthesis to monodisperse colloidal rhodium icosahedra, cubes, triangular plates, and octahedra using this route. Additionally, new insights into the important role of the polyol reducing solvent on the synthesis of these nanocrystals are revealed, and how these might be exploited to engender superior reaction control and novel products.Next, I will describe how a crystallization mechanism was established for the synthesis of numerous morphologies of noble metal nanocrystals. I present a thorough analysis of the synthesis of shape-controlled rhodium nanocrystals, using extensive transmission electron microscopy characterization, and relate these findings to one of the primary synthetic levers available in the polyol synthesis: the anionic ligands present. Further, I show that the crystallization process proceeds by a nonclassical mechanism in which cluster particles serve as a stable intermediate between molecular precursors and the final product. I then apply these principles to the shape-controlled synthesis of other noble metal nanocrystals before expounding a generalized formation mechanism in the polyol synthesis of colloidal metal nanocrystals. Finally, I will highlight my efforts in the designed synthesis and characterization of colloidal tin(II) sulfide (SnS) semiconducting "quantum dot" nanocrystals. I describe a route for the solution synthesis of monodisperse colloidal SnS nanosheets, nanocubes, and nanospherical polyhedra in high yield. Further, detailed crystallographic characterization of these nanocrystals using transmission electron microscopy indicates that their atomic structure possesses a previously-unreported nanoscale deviation from the bulk phase. Additionally, I show that their electronic and photocatalytic properties of these quantum dots are both shape-dependent and distinct from bulk SnS.
Download or read book Metal Nanocrystals written by Kallum M. Koczkur and published by American Chemical Society. This book was released on 2020-07-31 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Our society depends heavily on metals. They are ubiquitous construction materials, critical interconnects in integrated circuits, common coinage materials, and more. Excitingly, new uses for metals are emerging with the advent of nanoscience, as metal crystals with nanoscale dimensions can display new and tunable properties. The optical and photothermal properties of metal nanocrystals have led to cancer diagnosis and treatment platforms now in clinical trials, while, at the same time, the ability to tune the surface features of metal nanocrystals is giving rise to designer catalysts that enable more sustainable use of precious resources. These are just two examples of how metal nanocrystals are addressing important social needs.
Download or read book Nanoparticles written by Celso de Mello Donegá and published by Springer. This book was released on 2014-10-21 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book can be roughly divided into three parts: fundamental physico-chemical and physical principles of Nanoscience, chemistry and synthesis of nanoparticles, and techniques to study nanoparticles. The first chapter is concerned with the origin of the size dependence of the properties of nanomaterials, explaining it in terms of two fundamental nanoscale effects. This chapter also serves as a general introduction to the book, briefly addressing the definition and classification of nanomaterials and the techniques used to fabricate and study them. Chapter 2 lays out the theoretical framework within which to understand size effects on the properties of semiconductor nanocrystals, with particular emphasis on the quantum confinement effect. The optical properties of metal nanoparticles and metal nanostructures (periodic lattices) are discussed in Chapter 3. Chapter 4 is devoted to nanoporous materials, treating in detail their synthesis, structure and functional properties, as well as the physical properties of liquids confined in nanopores. The preparation methods, characterization techniques, and applications of supported nanoparticles are covered in Chapter 5. The sixth Chapter presents the essential physical-chemical concepts needed to understand the preparation of colloidal inorganic nanoparticles, and the remarkable degree of control that has been achieved over their composition, size, shape and surface. The last four Chapters are dedicated to a few selected characterization techniques that are very valuable tools to study nanoparticles. Chapter 7 concentrates on electron microscopy techniques, while Chapter 8 focuses on scanning probe microscopy and spectroscopy. Electron paramagnetic resonance (EPR) based spectroscopic techniques and their application to nanoparticles are explored in Chapter 9. Finally, Chapter 10 shows how solution Nuclear Magnetic Resonance (NMR) spectroscopic techniques can be used to unravel the surface chemistry of colloidal nanoparticles.
Download or read book Metal and Semiconductor Nanocrystals written by Jing Zhao and published by Frontiers Media SA. This book was released on 2020-01-14 with total page 91 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Crystallization and Growth of Colloidal Nanocrystals written by Edson Roberto Leite and published by Springer Science & Business Media. This book was released on 2011-11-17 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the size, shape, and microstructure of nanocrystalline materials strongly impact physical and chemical properties, the development of new synthetic routes to nanocrystals with controlled composition and morphology is a key objective of the nanomaterials community. This objective is dependent on control of the nucleation and growth mechanisms that occur during the synthetic process, which in turn requires a fundamental understanding of both classical nucleation and growth and non-classical growth processes in nanostructured materials. Recently, a novel growth process called Oriented Attachment (OA) was identified which appears to be a fundamental mechanism during the development of nanoscale materials. OA is a special case of aggregation that provides an important route by which nanocrystals grow, defects are formed, and unique—often symmetry-defying—crystal morphologies can be produced. This growth mechanism involves reversible self-assembly of primary nanocrystals followed by reorientation of the assembled nanoparticles to achieve structural accord at the particle-particle interface, the removal of adsorbates and solvent molecules, and, finally, the irreversible formation of chemical bonds to produce new single crystals, twins, and intergrowths. Crystallization and Growth of Colloidal Nanocrystals provides a current understanding of the mechanisms related to nucleation and growth for use in controlling nanocrystal morphology and physical-chemical properties, and is essential reading for any chemist or materials scientist with an interest in using nanocrystals as building blocks for larger structures. This book provides a compendium for the expert reader as well as an excellent introduction for advanced undergraduate and graduate students seeking a gateway into this dynamic area of research.
Download or read book Colloidal Synthesis and Photophysical Characterization of Group IV Alloy and Group IV V Semiconductors written by Venkatesham Tallapally and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomaterials, typically less than 100 nm size in any direction have gained noteworthy interest from scientific community owing to their significantly different and often improved physical properties compared to their bulk counterparts. Semiconductor nanoparticles (NPs) are of great interest to study their tunable optical properties, primarily as a function of size and shape. Accordingly, there has been a lot of attention paid to synthesize discrete semiconducting nanoparticles, of where Group III-V and II-VI materials have been studied extensively. In contrast, Group IV and Group IV-V based nanocrystals as earth abundant and less-non-toxic semiconductors have not been studied thoroughly. From the class of Group IV, Ge1-xSnxalloys are prime candidates for the fabrication of Si-compatible applications in the field of electronic and photonic devices, transistors, and charge storage devices. In addition, Ge1-xSnx alloys are potentials candidates for bio-sensing applications as alternative to toxic materials. Tin phosphides, a class of Group IV-V materials with their promising applications in thermoelectric, photocatalytic, and charge storage devices. However, both aforementioned semiconductors have not been studied thoroughly for their full potential in visible (Vis) to near infrared (NIR) optoelectronic applications. In this dissertation research, we have successfully developed unique synthetic strategies to produce Ge1-xSnxalloy quantum dots (QDs) and tin phosphide (Sn3P4, SnP, and Sn4P3) nanoparticles with tunable physical properties and crystal structures for potential applications in IR technologies. Low-cost, less-non-toxic, and abundantly-produced Ge1-xSnxalloys are an interesting class of narrow energy-gap semiconductors that received noteworthy interest in optical technologies. Admixing of Îł-Sn into Ge results in an indirect-to-direct bandgap crossover significantly improving light absorption and emission relative to indirect-gap Ge. However, the narrow energy-gaps reported for bulk Ge1-xSnxalloys have become a major impediment for their widespread application in optoelectronics. Herein, we report the first colloidal synthesis of Ge1-xSnxalloy quantum dots (QDs) with narrow size dispersity (3.3±0.5 -- 5.9±0.8 nm), wide range of Sn compositions (0--20.6%), and composition-tunable energy-gaps and near infrared (IR) photoluminescence (PL). The structural analysis of alloy QDs indicates linear expansion of cubic Ge lattice with increasing Sn, suggesting the formation of strain-free nanoalloys. The successful incorporation of Îł-Sn into crystalline Ge has been confirmed by electron microscopy, which suggests the homogeneous solid solution behavior of QDs. The quantum confinement effects have resulted in energy gaps that are significantly blue-shifted from bulk Ge for Ge1-xSnxalloy QDs with composition-tunable absorption onsets (1.72±0.84 eV for x=1.5--20.6%) and PL peaks (1.62--1.31 eV for x=1.5--5.6%). Time-resolved PL (TRPL) spectroscopy revealed microsecond and nanosecond timescale decays at 15 K and 295 K, respectively owing to radiative recombination of dark and bright excitons as well as the interplay of surface traps and core electronic states. Realization of low-to-non-toxic and silicon-compatible Ge1-xSnxQDs with composition-tunable near IR PL allows the unprecedented expansion of direct-gap Group IV semiconductors to a wide range of biomedical and advanced technological studies. Tin phosphides are a class of materials that received noteworthy interest in photocatalysis, charge storage and thermoelectric devices. Dual stable oxidation states of tin (Sn2+ and Sn4+) enable tin phosphides to exhibit different stoichiometries and crystal phases. However, the synthesis of such nanostructures with control over morphology and crystal structure has proven a challenging task. Herein, we report the first colloidal synthesis of size, shape, and phase controlled, narrowly disperse rhombohedral Sn4P3, hexagonal SnP, and amorphous tin phosphide nanoparticles (NPs) displaying tunable morphologies and size dependent physical properties. The control over NP morphology and crystal phase was achieved by tuning the nucleation/growth temperature, molar ratio of Sn/P, and incorporation of additional coordinating solvents (alkylphosphines). The absorption spectra of smaller NPs exhibit size-dependent blue shifts in energy gaps (0.88--1.38 eV) compared to the theoretical value of bulk Sn3P4 (0.83 eV), consistent with quantum confinement effects. The amorphous NPs adopt rhombohedral Sn4P3 and hexagonal SnP crystal structures at 180 and 250 ̊C, respectively. Structural and surface analysis indicates consistent bond energies for phosphorus across different crystal phases, whereas the rhombohedral Sn4P3 NPs demonstrate Sn oxidation states distinctive from those of the hexagonal and amorphous NPs owing to complex chemical structure. All phases exhibit N(1s) and ʋ(N-H) energies suggestive of alkylamine surface functionalization and are devoid of tetragonal Sn impurities.
Download or read book Semiconductor Nanocrystals written by Alexander L. Efros and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: A physics book that covers the optical properties of quantum-confined semiconductor nanostructures from both the theoretical and experimental points of view together with technological applications. Topics to be reviewed include quantum confinement effects in semiconductors, optical adsorption and emission properties of group IV, III-V, II-VI semiconductors, deep-etched and self assembled quantum dots, nanoclusters, and laser applications in optoelectronics.
Download or read book Semiconductor and Metal Nanocrystals written by Victor I. Klimov and published by CRC Press. This book was released on 2003-11-07 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: The vast technological potential of nanocrystalline materials, as well as current intense interest in the physics and chemistry of nanoscale phenomena, has led to explosive growth in research on semiconductor nanocrystals, also known as nanocrystal quantum dots, and metal nanoparticles. Semiconductor and Metal Nanocrystals addresses current topics impacting the field including synthesis and assembly of nanocrystals, theory and spectroscopy of interband and intraband optical transitions, single-nanocrystal optical and tunneling spectroscopies, electrical transport in nanocrystal assemblies, and physical and engineering aspects of nanocrystal-based devices. Written by experts who have contributed pioneering research, this reference comprises key advances in the field of semiconductor nanocrystal quantum dots and metal nanoparticles over the past several years. Focusing specifically on nanocrystals generated through chemical techniques, Semiconductor and Metal Nanocrystals Merges investigative frontiers in physics, chemistry, and engineering Documents advances in nanocrystal synthesis and assembly Explores the theory of electronic excitations in nanoscale particles Presents comprehensive information on optical spectroscopy of interband and intraband optical transitions Reviews data on single-nanocrystal optical and tunneling spectroscopies Weighs controversies related to carrier relaxation dynamics in ultrasmall nanoparticles Discusses charge carrier transport in nanocrystal assemblies Provides examples of lasing and photovoltaic nanocrystal-based devices Semiconductor and Metal Nanocrystals is a must read for scientists, engineers, and upper-level undergraduate and graduate students interested in the physics and chemistry of nanoscale semiconductor and metal particles, as well as general nanoscale science.
Download or read book Colloidal Metal Oxide Nanoparticles written by and published by Elsevier. This book was released on 2019-10-16 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloidal Metal Oxide Nanoparticles: Synthesis, Characterization and Applications is a one-stop reference for anyone with an interest in the fundamentals, synthesis and applications of this interesting materials system. The book presents a simple, effective and detailed discussion on colloidal metal oxide nanoparticles. It begins with a general introduction of colloidal metal oxide nanoparticles, then delves into the most relevant synthesis pathways, stabilization procedures, and synthesis and characterization techniques. Final sections discuss promising applications, including bioimaging, biosensing, diagnostic, and energy applications—i.e., solar cells, supercapacitors and environment applications—i.e., the treatment of contaminated soil, water purification and waste remediation. Provides the most comprehensive resource on the topic, from fundamentals, to synthesis and characterization techniques Presents key applications, including biomedical, energy, electronic and environmental Discusses the most relevant techniques for synthesis, patterning and characterization
Download or read book Transmission Electron Microscopy Characterization of Nanomaterials written by Challa S.S.R. Kumar and published by Springer Science & Business Media. This book was released on 2013-12-09 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Third volume of a 40volume series on nanoscience and nanotechnology, edited by the renowned scientist Challa S.S.R. Kumar. This handbook gives a comprehensive overview about Transmission electron microscopy characterization of nanomaterials. Modern applications and state-of-the-art techniques are covered and make this volume an essential reading for research scientists in academia and industry.
Download or read book Nanoparticulate Materials written by Kathy Lu and published by John Wiley & Sons. This book was released on 2012-09-25 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serving as the only systematic and comprehensive treatment on the topic of nanoparticle-based materials, this book covers synthesis, characterization, assembly, shaping and sintering of all types of nanoparticles including metals, ceramics, and semiconductors. A single-authored work, it is suitable as a graduate-level text in nanomaterials courses.
Download or read book Synthesis and Characterization of Transition metal Nanocrystals and Their Application in Catalysis written by Guangjun Cheng and published by . This book was released on 2003 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Colloidal Semiconductor Nanocrystals Synthesis Properties and Applications written by Vladimir Lesnyak and published by Frontiers Media SA. This book was released on 2020-01-06 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optical and Structural Studies of Shape controlled Semiconductor Nanocrystals and Their Self assembled Solids written by Benjamin Tavenner Diroll and published by . This book was released on 2015 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloidal nanocrystals are prominent candidates to displace current electronic active layers in solid-state device technologies and offer a body of physics which diverges from those of bulk materials and discreet molecules. Realizing the potential of colloidal nanocrystals may transform the costs and performance of common technologies, but understanding of the relationship between particle size, shape, uniformity, and composition and outputs like physical properties or device performance is often incomplete. This work uses the controlled synthesis of anisotropic colloidal nanocrystals to implement characterization techniques including X-ray diffraction and simulation, which allows an ensemble-level description of particle structure, as well as polarized and time-resolved spectroscopy, which demonstrates subtle synthetic control over the properties of quantum-mechanical wavefunctions. Time- and temperature-resolved optical spectroscopy is employed to analyze the behavior of nanocrystal samples under more realistic device operating conditions and to determine the structure/property relationships that underpin improved performance. Highly-uniform samples of colloidal nanocrystals are self-assembled into large-area thin films. Discussion of self-assembly is placed within the context the fundamentals of self-assembly processes and the roadmap to high-performance devices based upon colloidal nanocrystals. X-ray diffraction and microscopic analysis are performed to analyze and qualify the structure of self-assembled films. These measurement techniques provide figures of merit for nanocrystal assemblies including the sample crystallinity and purity, surface coverage, homogeneity. Diffraction analysis is further used to measure alignment of nanocrystal assemblies with respect to a substrate and the orientation of individual particles within assemblies. Monodisperse anisotropic building blocks encode the unique optoelectronic properties of isolated nanocrystals into solid state materials with long-range structural orientation.
Download or read book Toward Metal Nanoarchitectonics written by Franklin Jongmyung Kim and published by . This book was released on 2005 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Semiconductor Nanocrystals and Metal Nanoparticles written by Tupei Chen and published by CRC Press. This book was released on 2016-10-14 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor nanocrystals and metal nanoparticles are the building blocks of the next generation of electronic, optoelectronic, and photonic devices. Covering this rapidly developing and interdisciplinary field, the book examines in detail the physical properties and device applications of semiconductor nanocrystals and metal nanoparticles. It begins with a review of the synthesis and characterization of various semiconductor nanocrystals and metal nanoparticles and goes on to discuss in detail their optical, light emission, and electrical properties. It then illustrates some exciting applications of nanoelectronic devices (memristors and single-electron devices) and optoelectronic devices (UV detectors, quantum dot lasers, and solar cells), as well as other applications (gas sensors and metallic nanopastes for power electronics packaging). Focuses on a new class of materials that exhibit fascinating physical properties and have many exciting device applications. Presents an overview of synthesis strategies and characterization techniques for various semiconductor nanocrystal and metal nanoparticles. Examines in detail the optical/optoelectronic properties, light emission properties, and electrical properties of semiconductor nanocrystals and metal nanoparticles. Reviews applications in nanoelectronic devices, optoelectronic devices, and photonic devices.
Download or read book Nanocrystals written by Sudheer Neralla and published by BoD – Books on Demand. This book was released on 2012-08-29 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocrystals research has been an area of significant interest lately, due to the wide variety of potential applications in semiconductor, optical and biomedical fields. This book consists of a collection of research work on nanocrystals processing and characterization of their structural, optical, electronic, magnetic and mechanical properties. Various methods for nanocrystals synthesis are discussed in the book. Size-dependent properties such as quantum confinement, superparamagnetism have been observed in semiconductor and magnetic nanoparticles. Nanocrystals incorporated into different material systems have proven to possess improved properties. A review of the exciting outcomes nanoparticles study has provided indicates further accomplishments in the near future.
