Download or read book The Characteristics of Fatigue Crack Initiation and Growth in Three Alloys with an Approach to Design written by Ronald W. Stepian and published by . This book was released on 1974 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Small Fatigue Cracks written by K.S. Ravichandran and published by Elsevier. This book was released on 1999-09-30 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the fully peer-reviewed papers presented at the Third Engineering Foundation Conference on Small Fatigue Cracks, held under the chairmanship of K.S. Ravichandran and Y. Murakami during December 6-11, 1998, at the Turtle Bay Hilton, Oahu, Hawaii. This book presents a state-of-the-art description of the mechanics, mechanisms and applications of small fatigue cracks by most of the world's leading experts in this field. Topics ranging from the mechanisms of crack initiation, small crack behavior in metallic, intermetallic, ceramic and composite materials, experimental measurement, mechanistic and theoretical models, to the role of small cracks in fretting fatigue and the application of small crack results to the aging aircraft and high-cycle fatigue problems, are covered.
Download or read book The Growth of Small Corrosion Fatigue Cracks in Alloy 2024 written by Robert S. Piascik and published by . This book was released on 1993 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallurgy and Design of Alloys with Hierarchical Microstructures written by Krishnan K. Sankaran and published by Elsevier. This book was released on 2017-06-14 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallurgy and Design of Alloys with Hierarchical Microstructures covers the fundamentals of processing-microstructure-property relationships and how multiple properties are balanced and optimized in materials with hierarchical microstructures widely used in critical applications. The discussion is based principally on metallic materials used in aircraft structures; however, because they have sufficiently diverse microstructures, the underlying principles can easily be extended to other materials systems. With the increasing microstructural complexity of structural materials, it is important for students, academic researchers and practicing engineers to possess the knowledge of how materials are optimized and how they will behave in service. The book integrates aspects of computational materials science, physical metallurgy, alloy design, process design, and structure-properties relationships, in a manner not done before. It fills a knowledge gap in the interrelationships of multiple microstructural and deformation mechanisms by applying the concepts and tools of designing microstructures for achieving combinations of engineering properties—such as strength, corrosion resistance, durability and damage tolerance in multi-component materials—used for critical structural applications. Discusses the science behind the properties and performance of advanced metallic materials Provides for the efficient design of materials and processes to satisfy targeted performance in materials and structures Enables the selection and development of new alloys for specific applications based upon evaluation of their microstructure as illustrated in this work
Download or read book Fatigue Assessment of Welded Joints by Local Approaches written by Dieter Radaj and published by Woodhead Publishing. This book was released on 2006-10-30 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: Local approaches to fatigue assessment are used to predict the structural durability of welded joints, to optimise their design and to evaluate unforeseen joint failures. This standard work provides a systematic survey of the principles and practical applications of the various methods. It covers the hot spot structural stress approach to fatigue in general, the notch stress and notch strain approach to crack initiation and the fracture mechanics approach to crack propagation. Seam-welded and spot-welded joints in structural steels and aluminium alloys are also considered.This completely reworked second edition takes into account the tremendous progress in understanding and applying local approaches which has been achieved in the last decade. It is a standard reference for designers, structural analysts and testing engineers who are responsible for the fatigue-resistant in-service behaviour of welded structures. Completely reworked second edition of a standard work providing a systematic survey of the principles and practical applications of the various methods Covers the hot spot structural stress approach to fatigue in general, the notch stress and notch strain approach to crack initiation and the fracture mechanics approach to crack propagation. Written by a distinguished team of authors
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1984 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 1016 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Failure Analysis in Engineering Applications written by Shin-Ichi Nishida and published by Elsevier. This book was released on 2014-05-15 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failure Analysis in Engineering Applications deals with equipment and machine design together with examples of failures and countermeasures to avoid such failures. This book analyzes failures in facilities or structures and the ways to prevent them from happening in the future. The author describes conventional terms associated with failure or states of failure including the strength of materials, as well as the procedure in failure analysis (materials used, design stress, service conditions, simulation, examination of results). The author also describes the mechanism of fatigue failure and prediction methods to estimate the remaining life of affected structures. The author cites some precautions to be followed in actual failure analysis such as detailed observation on the fracture site, removal of surface deposits (for example, rusts) without altering the fracture size or shape, The book gives examples of analysis of failure involving a crane head sheave hanger, wire rope, transmission shaft, environmental failure of fastening screws, and failures in rail joints. This book is intended for civil and industrial engineers, for technical designers or engineers involved in the maintenance of equipment, machineries, and structures.
Download or read book Comprehensive Structural Integrity written by Ian Milne and published by Elsevier. This book was released on 2003-07-25 with total page 4647 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this major reference work is to provide a first point of entry to the literature for the researchers in any field relating to structural integrity in the form of a definitive research/reference tool which links the various sub-disciplines that comprise the whole of structural integrity. Special emphasis will be given to the interaction between mechanics and materials and structural integrity applications. Because of the interdisciplinary and applied nature of the work, it will be of interest to mechanical engineers and materials scientists from both academic and industrial backgrounds including bioengineering, interface engineering and nanotechnology. The scope of this work encompasses, but is not restricted to: fracture mechanics, fatigue, creep, materials, dynamics, environmental degradation, numerical methods, failure mechanisms and damage mechanics, interfacial fracture and nano-technology, structural analysis, surface behaviour and heart valves. The structures under consideration include: pressure vessels and piping, off-shore structures, gas installations and pipelines, chemical plants, aircraft, railways, bridges, plates and shells, electronic circuits, interfaces, nanotechnology, artificial organs, biomaterial prostheses, cast structures, mining... and more. Case studies will form an integral part of the work.
Download or read book Fatigue Crack Initiation in Carbon and Low alloy Steels in Light Water Reactor Environments written by and published by . This book was released on 1998 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt: Section 111 of the ASME Boiler and Pressure Vessel Code specifies fatigue design curves for structural materials. The effects of reactor coolant environments are not explicitly addressed by the Code design curves. Recent test data illustrate potentially significant effects of light water reactor (LWR) coolant environments on the fatigue resistance of carbon and low-alloy steels. Under certain loading and environmental conditions, fatigue lives of test specimens may be shorter than those in air by a factor of H"0. The crack initiation and crack growth characteristics of carbon and low-alloy steels in LWR environments are presented. Decreases in fatigue life of these steels in high-dissolved-oxygen water are caused primarily by the effect of environment on growth of short cracks
Download or read book Metals Abstracts written by and published by . This book was released on 1998 with total page 1076 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue Crack Growth written by Ping Tang and published by Nova Science Publishers. This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the authors present current research in the study of the mechanisms, behaviour and analysis of fatigue crack growths. Topics discussed in this compilation include the unified fatigue crack growth rate model; practical tools for statistical fatigue design; probablistic algorithms performance evaluation and application in multi-fractured structures; three dimensional effects in the fracture mechanics of bi-dimensional specimens; fatigue crack propagation mechanism in porous open pore metal foams; lifetime predictions for short fatigue crack's initiation-propagation by basic mechanical properties; variable amplitude fatigue crack growth in selected aluminium alloys; fatigue threshold R-curves for analysis of short fatigue cracks; and multiaxial fatigue life prediction for lateral notched round bars made of high strength steel.
Download or read book Japanese Science and Technology written by and published by . This book was released on 1986 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Aluminium Metallurgy written by Roger Lumley and published by Elsevier. This book was released on 2010-11-25 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminium is an important metal in manufacturing, due to its versatile properties and the many applications of both the processed metal and its alloys in different industries. Fundamentals of aluminium metallurgy provides a comprehensive overview of the production, properties and processing of aluminium, and its applications in manufacturing industries. Part one discusses different methods of producing and casting aluminium, covering areas such as casting of alloys, quality issues and specific production methods such as high-pressure diecasting. The metallurgical properties of aluminium and its alloys are reviewed in Part two, with chapters on such topics as hardening, precipitation processes and solute partitioning and clustering, as well as properties such as fracture resistance. Finally, Part three includes chapters on joining, laser sintering and other methods of processing aluminium, and its applications in particular areas of industry such as aerospace. With its distinguished editor and team of expert contributors, Fundamentals of aluminium metallurgy is a standard reference for researchers in metallurgy, as well as all those involved in the manufacture and use of aluminium products. Provides a comprehensive overview of the production, properties and processing of aluminium, and its applications in manufacturing industries Considers many issues of central importance in aluminium production and utilization considering quality issues and design for fatigue growth resistance Metallurgical properties of aluminium and its alloys are further explored with particular reference to work hardening and applications of industrial alloys
Download or read book Fatigue Crack Propagation in Metals and Alloys written by Ulrich Krupp and published by John Wiley & Sons. This book was released on 2007-04-09 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive overview of the whole field of fatigue and fracture of metallic materials covers both the theoretical background and some of the latest experimental techniques. It provides a summary of the complex interactions between material microstructure and cracks, classifying them with respect to the overall damage process with a focus on microstructurally short cracks and dynamic embrittlement. It furthermore introduces new concepts for the numerical treatment of fatigue microcrack propagation and their implementation in fatigue-life prediction models.This comprehensive overview of the whole field of fatigue and fracture of metallic materials covers both the theoretical background and the latest experimental techniques. It provides a summary of the complex interactions between material microstructure and cracks, classifying them with respect to the overall damage process. It furthermore introduces new concepts for the numerical treatment of fatigue microcrack propagation and their implementation in fatigue-life prediction models.
Download or read book Fatigue of Structures and Materials written by J. Schijve and published by Springer Science & Business Media. This book was released on 2008-12-16 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue of structures and materials covers a wide scope of different topics. The purpose of the present book is to explain these topics, to indicate how they can be analyzed, and how this can contribute to the designing of fatigue resistant structures and to prevent structural fatigue problems in service. Chapter 1 gives a general survey of the topic with brief comments on the signi?cance of the aspects involved. This serves as a kind of a program for the following chapters. The central issues in this book are predictions of fatigue properties and designing against fatigue. These objectives cannot be realized without a physical and mechanical understanding of all relevant conditions. In Chapter 2 the book starts with basic concepts of what happens in the material of a structure under cyclic loads. It illustrates the large number of variables which can affect fatigue properties and it provides the essential background knowledge for subsequent chapters. Different subjects are presented in the following main parts: • Basic chapters on fatigue properties and predictions (Chapters 2–8) • Load spectra and fatigue under variable-amplitude loading (Chapters 9–11) • Fatigue tests and scatter (Chapters 12 and 13) • Special fatigue conditions (Chapters 14–17) • Fatigue of joints and structures (Chapters 18–20) • Fiber-metal laminates (Chapter 21) Each chapter presents a discussion of a speci?c subject.
