Download or read book The BSCCO System written by A. V. Narlikar and published by Nova Publishers. This book was released on 2001 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 35th volume of the 'Studies' is devoted to the technologically important BSCCO system. It focuses on a host of topics such as the synthesis and fabrication of conductors, superconducting BSCCO magnets, and the basic technological properties of the material in relation to the microstructure. The authors are distinguished in the field, working in different parts of the world, maintaining the international character of the series.

Download or read book Structure of Materials written by Marc De Graef and published by Cambridge University Press. This book was released on 2012-10-08 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highly readable, popular textbook for upper undergraduates and graduates comprehensively covers the fundamentals of crystallography and symmetry, applying these concepts to a large range of materials. New to this edition are more streamlined coverage of crystallography, additional coverage of magnetic point group symmetry and updated material on extraterrestrial minerals and rocks. New exercises at the end of chapters, plus over 500 additional exercises available online, allow students to check their understanding of key concepts and put into practice what they have learnt. Over 400 illustrations within the text help students visualise crystal structures and more abstract mathematical objects, supporting more difficult topics like point group symmetries. Historical and biographical sections add colour and interest by giving an insight into those who have contributed significantly to the field. Supplementary online material includes password-protected solutions, over 100 crystal structure data files, and Powerpoints of figures from the book.

Download or read book Superconducting Glass ceramics in Bi Sr Ca Cu O written by Yoshihiro Abe and published by World Scientific. This book was released on 1997 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: High c oxide superconductors such as Bi(Pb)-Sr-Ca-Cu-O (BSCCO) and Y-Ba-Cu-O (YBCO) systems are usually fabricated by sintering given mixtures of raw materials. Generally, sintering processing takes a longer heating time and the products are mechanically low strength and cannot be formed into complex shapes such as a coil, a curved fine tube or a fine rod. Another way to produce the ceramics is a glass-ceramic process in which the glasses prepared by melt-quenching are reheated for crystallization. A given mixture of raw materials in BSCCO is easily melted and quenched to form a given shape of glass, while that in YBCO is not glassified.This invaluable book has been written by authors from five countries. It presents a unique way to fabricate superconducting ceramics in BSCCO by glass-ceramic processing.

Download or read book The New Superconducting Electronics written by H. Weinstock and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is based on the proceedings of the NATO-sponsored Advanced Studies Institute (ASn on The New Superconducting Electronics (held 9-20 August 1992 in Waterville Valley, New Hampshire USA). The contents herein are intended to provide an update to an earlier volume on the same subject (based on a NATO ASI held in 1988). Four years seems a relatively short time interval, and our title itself, featuring The New Superconducting Electronics, may appear somewhat pretentious. Nevertheless, we feel strongly that the ASI fostered a timely reexamination of the technical progress and application potential of this rapid-paced field. There are, indeed, many new avenues for technological innovation which were not envisioned or considered possible four years ago. The greatest advances by far have occurred with regard to oxide superconductors, the so-called high transition-temperature superconductors, known in short as HTS. These advances are mainly in the ability to fabricate both (1) high-quality, relatively large-area films for microwave filters and (2) multilayer device structures, principally superconducting-normal-superconducting (SNS) Josephson junctions, for superconducting-quantum-interference-device (SQUID) magnetometers. Additionally, we have seen the invention and development of the flux-flow transistor, a planar three-terminal device. During the earlier ASI only the very first HTS films with adequate critical-current density had just been fabricated, and these were of limited area and had high resistance for microwave current.

Download or read book Theory of Copper Oxide Superconductors written by Hiroshi Kamimura and published by Springer Science & Business Media. This book was released on 2005-05-06 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an advanced textbook for graduate students and researchers wishing to learn about high temperature superconductivity in copper oxides, in particular the Kamimura-Suwa (K-S) model. Because a number of models have been proposed since the discovery of high temperature superconductivity by Bednorz and Müller in 1986, the book first explains briefly the historical development that led to the K-S model. It then focuses on the physical background necessary to understand the K-S model and on the basic principles behind various physical phenomena such as electronic structures, electrical, thermal and optical properties, and the mechanism of high temperature superconductivity.

Download or read book Advances in Superconductivity IV written by Hisao Hayakawa and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1086 pages. Available in PDF, EPUB and Kindle. Book excerpt: Five years have passed since the breakthrough in the critical temperature for superconductors. During this period, many superconducting materials have been discovered and developed, and our knowledge of the physical and other properties of oxide superconductors has deepened through extensive and intensive research. This knowledge has advanced superconductivity science and technology from the initial questioning stage to a more developed but still uncertain second stage where research activity in superconductivity now overlaps with fields of application. Generally speaking, science resonates with technology. Science not only complements but also competes with or stimulates technology. New scientific knowledge has triggered the second technological research stage. Much progress has been made in the development of practical devices, encouraging the application of superconductors in areas such as human levitation, a high speed levitated bearing, large current transforming leads, and high frequency devices. This technological progress has increased our understanding of the science involved, such as flux pinning and dynamics, and anomalous long-range superconducting interactions. At this important stage, international cooperation and collaborative projects can effectively sustain aggressive research and development in order to advance superconductivity to the next stages. The ISS Symposium is expected to serve as a venue for increasing our knowledge of superconductivity and for exchanging visions for future research and applications, through the presentation and discus of the latest research results. These proceedings also aim to summarize sion annual progress in high-Tc superconductivity in all fields.

Download or read book Physics and Materials Science of Vortex States Flux Pinning and Dynamics written by R. Kossowsky and published by Springer Science & Business Media. This book was released on 1999-04-30 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Study Institute, Kusadasi, Turkey, July 26-August 8, 1998

Download or read book Condensed Matter Physics written by Hari Prakash (of Physics Dept., Allahabad University.) and published by Alpha Science Int'l Ltd.. This book was released on 1999 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributed seminar papers.

Download or read book High Temperature Superconducting Magnetic Levitation written by Jia-Su Wang and published by Walter de Gruyter GmbH & Co KG. This book was released on 2017-12-18 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors begin this book with a systematic overview of superconductivity, superconducting materials, magnetic levitation, and superconducting magnetic levitation - the prerequisites to understand the latter part of the book - that forms a solid foundation for further study in High Temperature Superconducting Magnetic Levitation (HTS Maglev). This book presents our research progress on HTS Maglev at Applied Superconductivity Laboratory (ASCLab) of Southwest Jiaotong University (SWJTU), China, with an emphasis on the findings that led to the world‘s first manned HTS Maglev test vehicle "Century". The book provides a detailed description on our previous work at ASCLab including the designing of the HTS Maglev test and measurement method as well as the apparatus, building "Century", developing the HTS Maglev numerical simulation system, and making new progress on HTS Maglev. The final parts of this book discuss research and prototyping efforts at ASCLab in several adjacent fi elds including HTS Maglev bearing, Flywheel Energy Storage System (FESS) and HTS maglev launch technology. We hope this book becomes a valuable source for researchers and engineers working in the fascinating field of HTS Maglev science and engineering. Contents Fundamentals of superconductivity Superconducting materials Magnetic levitation Superconducting magnetic levitation HTS Maglev experimental methods and set-up First manned HTS Maglev vehicle in the world Numerical simulations of HTS Maglev New progress of HTS Maglev vehicle HTS Maglev bearing and flywheel energy storage system HTS Maglev launch technology

Download or read book Handbook of Clean Energy Systems 6 Volume Set written by Jinyue Yan and published by John Wiley & Sons. This book was released on 2015-06-22 with total page 4038 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Clean Energy Systems brings together an international team of experts to present a comprehensive overview of the latest research, developments and practical applications throughout all areas of clean energy systems. Consolidating information which is currently scattered across a wide variety of literature sources, the handbook covers a broad range of topics in this interdisciplinary research field including both fossil and renewable energy systems. The development of intelligent energy systems for efficient energy processes and mitigation technologies for the reduction of environmental pollutants is explored in depth, and environmental, social and economic impacts are also addressed. Topics covered include: Volume 1 - Renewable Energy: Biomass resources and biofuel production; Bioenergy Utilization; Solar Energy; Wind Energy; Geothermal Energy; Tidal Energy. Volume 2 - Clean Energy Conversion Technologies: Steam/Vapor Power Generation; Gas Turbines Power Generation; Reciprocating Engines; Fuel Cells; Cogeneration and Polygeneration. Volume 3 - Mitigation Technologies: Carbon Capture; Negative Emissions System; Carbon Transportation; Carbon Storage; Emission Mitigation Technologies; Efficiency Improvements and Waste Management; Waste to Energy. Volume 4 - Intelligent Energy Systems: Future Electricity Markets; Diagnostic and Control of Energy Systems; New Electric Transmission Systems; Smart Grid and Modern Electrical Systems; Energy Efficiency of Municipal Energy Systems; Energy Efficiency of Industrial Energy Systems; Consumer Behaviors; Load Control and Management; Electric Car and Hybrid Car; Energy Efficiency Improvement. Volume 5 - Energy Storage: Thermal Energy Storage; Chemical Storage; Mechanical Storage; Electrochemical Storage; Integrated Storage Systems. Volume 6 - Sustainability of Energy Systems: Sustainability Indicators, Evaluation Criteria, and Reporting; Regulation and Policy; Finance and Investment; Emission Trading; Modeling and Analysis of Energy Systems; Energy vs. Development; Low Carbon Economy; Energy Efficiencies and Emission Reduction. Key features: Comprising over 3,500 pages in 6 volumes, HCES presents a comprehensive overview of the latest research, developments and practical applications throughout all areas of clean energy systems, consolidating a wealth of information which is currently scattered across a wide variety of literature sources. In addition to renewable energy systems, HCES also covers processes for the efficient and clean conversion of traditional fuels such as coal, oil and gas, energy storage systems, mitigation technologies for the reduction of environmental pollutants, and the development of intelligent energy systems. Environmental, social and economic impacts of energy systems are also addressed in depth. Published in full colour throughout. Fully indexed with cross referencing within and between all six volumes. Edited by leading researchers from academia and industry who are internationally renowned and active in their respective fields. Published in print and online. The online version is a single publication (i.e. no updates), available for one-time purchase or through annual subscription.

Download or read book New Developments In Applied Superconductivity Proceedings Of The International Symposium written by Yukitaka Murakami and published by World Scientific. This book was released on 1989-06-01 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt: This symposium focused on new superconductors, electronics, magnet technology, energy and new applications. Recent discoveries in HTc, with transition temperatures over 90 K, have spawned a search for practical new applications. These applications extend from current uses such as that of the medical MRI to future applications, represented by research on new high-temperature materials. They span from microcircuit applications to the proposed SMES and fusion reactor applications.

Download or read book Journal of Research of the National Institute of Standards and Technology written by and published by . This book was released on 1999 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reports NIST research and development in the physical and engineering sciences in which the Institute is active. These include physics, chemistry, engineering, mathematics, and computer sciences. Emphasis on measurement methodology and the basic technology underlying standardization.

Download or read book Handbook of High Temperature Superconductivity written by J. Robert Schrieffer and published by Springer Science & Business Media. This book was released on 2007-03-20 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the 1980s, a general theme in the study of high-temperature superconductors has been to test the BCS theory and its predictions against new data. At the same time, this process has engendered new physics, new materials, and new theoretical frameworks. Remarkable advances have occurred in sample quality and in single crystals, in hole and electron doping in the development of sister compounds with lower transition temperatures, and in instruments to probe structure and dynamics. Handbook of High-Temperature Superconductvity is a comprehensive and in-depth treatment of both experimental and theoretical methodologies by the the world's top leaders in the field. The Editor, Nobel Laureate J. Robert Schrieffer, and Associate Editor James S. Brooks, have produced a unified, coherent work providing a global view of high-temperature superconductivity covering the materials, the relationships with heavy-fermion and organic systems, and the many formidable challenges that remain.

Download or read book Superconductivity and Applications written by Yi-Han Kao and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 795 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Proceedings is a collection of papers presented at the Third Annual Conference on Superconductivity and Applications organized by the New York State Institute on Superconductivity. This year the Conference was held at the Buffalo Hilton Hotel on September 19- 21, 1989, with previous meetings on September 28-29,1987, and April 18-20, 1988. As in previous years, this meeting was highly successful, with an attendance of over three hundred researchers participating in lively scientific exchanges and discussions. The high quality of the talks is evident in this Proceedings. The field of high temperature superconductivity has matured considerably since its early days of media frenzy and rapid new discoveries. However, the enthusiasm and pace of research have not slowed down. A much better picture of the nature of high temperature superconductivity, the properties of these new materials and where they may find their eventual use has emerged. Processing techniques, especially thin film deposition, have been perfected nearly to the point of allowing commercial applications. We expect continued phenomenal growth of the field of high temperature superconductivity, both in terms of research and applications for many years to come.

Download or read book Materials Science in Static High Magnetic Fields written by Watanabe Kyoko and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the most comprehensive review of the influence of highly intense magnetic fields on materials of various classes.

Download or read book Handbook of Superconducting Materials written by David A. Cardwell and published by CRC Press. This book was released on 2003 with total page 1120 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the advent of High Temperature Superconductivity and the increasing reliability of fabrication techniques, superconductor technology has moved firmly into the mainstream of academic and industrial research. There is currently no single source of practical information giving guidance on which technique to use for any particular category of superconductor. An increasing number of materials scientists and electrical engineers require easy access to practical information, sensible advice and guidance on 'best-practice' and reliable, proven fabrication and characterisation techniques.The Handbook will be the definitive collection of material describing techniques for the fabrication and analysis of superconducting materials. In addition to the descriptions of techniques, authoritative discussions written by leading researchers will give guidance on the most appropriate technique for a particular situation.Characterisation and measurement techniques will form an important part of the Handbook, providing researchers with a standard reference for experimental techniques. The tutorial style description of these techniques makes the Handbook particularly suitable for use by graduate students.The Handbook will be supported by a comprehensive web site which will be updated with new data as it emerges.The Handbook has six main sections: -- Fundamentals of Superconductivity - characteristic properties, elementary theory, critical current of type II superconductors-- Processing - bulk materials, wires and tapes, thick and think films, contact techniques-- Characterisation Techniques - structure/microstructure, measurement and interpretation of electromagnetic properties,measurement of physics properties-- Materials - characteristic properties of low and high Tc materials-- Applications - high current applications, trapped flux devices, high frequency devices, josephson junction devic

Download or read book High Temperature Superconducting Materials Science and Engineering written by Donglu Shi and published by Elsevier. This book was released on 1995-02-20 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the fascinating field of high-temperature superconductivity. Basic concepts–including experimental techniques and theoretical issues–are discussed in a clear, systematic manner. In addition, the most recent research results in the measurements, materials synthesis and processing, and characterization of physical properties of high-temperature superconductors are presented. Researchers and students alike can use this book as a comprehensive introduction not only to superconductivity but also to materials-related research in electromagnetic ceramics. Special features of the book: - presents recent developments in vortex-state properties, defects characterization, and phase equilibrium - introduces basic concepts for experimental techniques at low temperatures and high magnetic fields - provides a valuable reference for materials-related research - discusses potential industrial applications of high-temperature superconductivity - includes novel processing technologies for thin film and bulk materials - suggests areas of research and specific problems whose solution can make high-Tc superconductors a practical reality