Download or read book The Boundary Integral Approach to Static and Dynamic Contact Problems written by H Antes and published by . This book was released on 1992-07-31 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Boundary Integral Approach to Static and Dynamic Contact Problems written by H. Antes and published by Birkhäuser. This book was released on 2013-03-07 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fields of boundary integral equations and of inequality problems, or more gen erally, of nonsmooth mechanics, have seen, in a remarkably short time, a considerable development in mathematics and in theoretical and applied mechanics. The engineering sciences have also benefited from these developments in that open problems have been attacked succesfully and entirely new methodologies have been developed. The contact problems of elasticity is a class of problems which has offered many open questions to deal with, both to the research workers working on the theory of boundary integral equations and to those working on the theory of inequality problems. Indeed, the area of static and dynamic contact problems could be considered as the testing workbench of the new developments in both the inequality problems and in the boundary integral equations. This book is a first attempt to formulate and study the boundary integral equations arising in inequality contact problems. The present book is a result of more than two decades of research and teaching activity of the first author on boundary integral equations and, of the second author, on inequality problems, as well as the outgrowth of seminars and courses for a variety of audiences in the Technical University of Aachen, the Aristotle University of Thessa loniki, the Universities of Bochum, of Hamburg and Braunschweig, the Pontificia Univ. Catolica in Rio de Janeiro etc.
Download or read book The Boundary Element Method Volume 2 written by M. H. Aliabadi and published by John Wiley & Sons. This book was released on 2002-04-29 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: The boundary element method (BEM) is a modern numerical technique, which has enjoyed increasing popularity over the last two decades, and is now an established alternative to traditional computational methods of engineering analysis. The main advantage of the BEM is its unique ability to provide a complete solution in terms of boundary values only, with substantial savings in modelling effort. This two-volume book set is designed to provide the readers with a comprehensive and up-to-date account of the boundary element method and its application to solving engineering problems. Each volume is a self-contained book including a substantial amount of material not previously covered by other text books on the subject. Volume 1 covers applications to heat transfer, acoustics, electrochemistry and fluid mechanics problems, while volume 2 concentrates on solids and structures, describing applications to elasticity, plasticity, elastodynamics, fracture mechanics and contact analysis. The early chapters are designed as a teaching text for final year undergraduate courses. Both volumes reflect the experience of the authors over a period of more than twenty years of boundary element research. This volume, Applications in Solids and Structures, provides a comprehensive presentation of the BEM from fundamentals to advanced engineering applications and encompasses: Elasticity for 2D, 3D and Plates and Shells Non-linear, Transient and Thermal Stress Analysis Crack Growth and Multi-body Contact Mechanics Sensitivity Analysis and Optimisation Analysis of Assembled Structures. An important feature of this book is the in-depth presentation of BEM formulations in all the above fields, including detailed discussions of the basic theory, numerical algorithms and where possible simple examples are included, as well as test results for practical engineering applications of the method. Although most of the methods presented are the latest developments in the field, the author has included some simple techniques, which are helpful in understanding the computer implementation of BEM. Another notable feature is the comprehensive presentation of a new generation of boundary elements known as the Dual Boundary Element Method. Written by an internationally recognised authority in the field, this is essential reading for postgraduates, researchers and practitioners in Aerospace, Mechanical and Civil Engineering and Applied Mathematics.
Download or read book Advanced Multibody System Dynamics written by Werner Schiehlen and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: The German Research Council (DFG) decided 1987 to establish a nationwide five year research project devoted to dynamics of multibody systems. In this project universities and research centers cooperated with the goal to develop a general pur pose multibody system software package. This concept provides the opportunity to use a modular structure of the software, i.e. different multibody formalisms may be combined with different simulation programmes via standardized interfaces. For the DFG project the database RSYST was chosen using standard FORTRAN 77 and an object oriented multibody system datamodel was defined. The project included • research on the fundamentals of the method of multibody systems, • concepts for new formalisms of dynamical analysis, • development of efficient numerical algorithms and • realization of a powerful software package of multibody systems. These goals required an interdisciplinary cooperation between mathematics, compu ter science, mechanics, and control theory. ix X After a rigorous reviewing process the following research institutions participated in the project (under the responsibility of leading scientists): Technical University of Aachen (Prof. G. Sedlacek) Technical University of Darmstadt (Prof. P. Hagedorn) University of Duisburg M. Hiller) (Prof.
Download or read book Mechanics of Poroelastic Media written by A.P.S. Selvadurai and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Mechanics of Poroelastic Media the classical theory of poroelasticity developed by Biot is developed and extended to the study of problems in geomechanics, biomechanics, environmental mechanics and materials science. The contributions are grouped into sections covering constitutive modelling, analytical aspects, numerical modelling, and applications to problems. The applications of the classical theory of poroelasticity to a wider class of problems will be of particular interest. The text is a standard reference for researchers interested in developing mathematical models of poroelasticity in geoenvironmental mechanics, and in the application of advanced theories of poroelastic biomaterials to the mechanics of biomaterials.
Download or read book Boundary Element Topics written by W.L. Wendland and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: The so-called boundary element methods BEM, i.e. finite element approxima tions of boundary integral equations have been improved recently even more vividly then ever before and found some remarkable support by the German Research Foundation DFG in the just finished Priority Research Program "boundary element methods" . When this program began, we could start from several already existing particular activities which then during the six years initiated many new re sults and decisive new developments in theory and algorithms. The program was started due to encouragement by E. Stein, when most of the later par ticipants met in Stuttgart at a Boundary Element Conference 1987. Then W. Hackbusch, G. Kuhn, S. Wagner and W. Wendland were entrusted with writing the proposal which was 1988 presented at the German Research Foun dation and started in 1989 with 14 projects at 11 different universities. After German unification, the program was heavily extended by six more projects, four of which located in Eastern Germany. When we started, we were longing for the following goals: 1. Mathematicians and engineers should do joint research. 2. Methods and computational algorithms should be streamlined with re spect to the new computer architectures of vector and parallel computers. 3. The asymptotic error analysis of boundary element methods should be further developed. 4. Non-linear material laws should be taken care of by boundary element methods for crack-mechanics. 5. The coupling of finite boundary elements should be improved.
Download or read book Boundary Element Advances in Solid Mechanics written by Dimitri Beskos and published by Springer. This book was released on 2014-05-04 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents and discusses recent advances in boundary element methods and their solid mechanics applications. It illustrates these methods in their latest forms, developed during the last five to ten years, and demonstrates their advantages in solving a wide range of solid mechanics problems.
Download or read book Parameter Identification of Materials and Structures written by Zenon Mróz and published by Springer Science & Business Media. This book was released on 2007-04-28 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nature and the human creations are full of complex phenomena, which sometimes can be observed but rarely follow our hypotheses. The best we can do is to build a parametric model and then try to adjust the unknown parameters based on the available observations. This topic, called parameter identification, is discussed in this book for materials and structures. The present volume of lecture notes follows a very successful advanced school, which we had the honor to coordinate in Udine, October 6-10, 2003. The authors of this volume present a wide spectrum of theories, methods and applications related to inverse and parameter identification problems. We thank the invited lecturers and the authors of this book for their contributions, the participants of the course for their active participation and the interesting discussions as well as the people of CISMfor their hospitality and their well-known professional help. Zenon Mroz Georgios E. Stavroulakis CONTENTS Preface An overview of enhanced modal identification by L. Bolognini 1 The reciprocity gap functional for identifying defects and cracks by H. D. Bui, A. Constantinescu and H. Maigre 17 Some innovative industrial prospects centered on inverse analyses by G. Maier, M. Bocciarelli andR. Fedele 55 Identification of damage in beam and plate structures using parameter dependent modal changes and thermographic methods by Z. Mroz andK. Dems 95 Crack and flaw identification in statics and dynamics, using filter algorithms and soft computing by G. E, Stavroulakis, M. Engelhardt andH.
Download or read book Comprehensive Structural Integrity written by Ian Milne and published by Elsevier. This book was released on 2003-07-25 with total page 4647 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this major reference work is to provide a first point of entry to the literature for the researchers in any field relating to structural integrity in the form of a definitive research/reference tool which links the various sub-disciplines that comprise the whole of structural integrity. Special emphasis will be given to the interaction between mechanics and materials and structural integrity applications. Because of the interdisciplinary and applied nature of the work, it will be of interest to mechanical engineers and materials scientists from both academic and industrial backgrounds including bioengineering, interface engineering and nanotechnology. The scope of this work encompasses, but is not restricted to: fracture mechanics, fatigue, creep, materials, dynamics, environmental degradation, numerical methods, failure mechanisms and damage mechanics, interfacial fracture and nano-technology, structural analysis, surface behaviour and heart valves. The structures under consideration include: pressure vessels and piping, off-shore structures, gas installations and pipelines, chemical plants, aircraft, railways, bridges, plates and shells, electronic circuits, interfaces, nanotechnology, artificial organs, biomaterial prostheses, cast structures, mining... and more. Case studies will form an integral part of the work.
Download or read book Applied Functional Analysis written by Abul Hasan Siddiqi and published by CRC Press. This book was released on 2003-09 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: The methods of functional analysis have helped solve diverse real-world problems in optimization, modeling, analysis, numerical approximation, and computer simulation. Applied Functional Analysis presents functional analysis results surfacing repeatedly in scientific and technological applications and presides over the most current analytical and numerical methods in infinite-dimensional spaces. This reference highlights critical studies in projection theorem, Riesz representation theorem, and properties of operators in Hilbert space and covers special classes of optimization problems. Supported by 2200 display equations, this guide incorporates hundreds of up-to-date citations.
Download or read book Integral Equations written by Wolfgang Hackbusch and published by Birkhäuser. This book was released on 2012-12-06 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The theory of integral equations has been an active research field for many years and is based on analysis, function theory, and functional analysis. On the other hand, integral equations are of practical interest because of the «boundary integral equation method», which transforms partial differential equations on a domain into integral equations over its boundary. This book grew out of a series of lectures given by the author at the Ruhr-Universitat Bochum and the Christian-Albrecht-Universitat zu Kiel to students of mathematics. The contents of the first six chapters correspond to an intensive lecture course of four hours per week for a semester. Readers of the book require background from analysis and the foundations of numeri cal mathematics. Knowledge of functional analysis is helpful, but to begin with some basic facts about Banach and Hilbert spaces are sufficient. The theoretical part of this book is reduced to a minimum; in Chapters 2, 4, and 5 more importance is attached to the numerical treatment of the integral equations than to their theory. Important parts of functional analysis (e. g. , the Riesz-Schauder theory) are presented without proof. We expect the reader either to be already familiar with functional analysis or to become motivated by the practical examples given here to read a book about this topic. We recall that also from a historical point of view, functional analysis was initially stimulated by the investigation of integral equations.
Download or read book New Developments in Contact Problems written by Peter Wriggers and published by Springer Science & Business Media. This book was released on 1999-11-22 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book gives an overview on formulation, mathematical analysis and numerical solution procedures of contact problems. In this respect the book should be of value to applied mathematicians and engineers who are concerned with contact mechanics.
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nonconvex Optimization in Mechanics written by E.S. Mistakidis and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonconvexity and nonsmoothness arise in a large class of engineering applica tions. In many cases of practical importance the possibilities offered by opti mization with its algorithms and heuristics can substantially improve the per formance and the range of applicability of classical computational mechanics algorithms. For a class of problems this approach is the only one that really works. The present book presents in a comprehensive way the application of opti mization algorithms and heuristics in smooth and nonsmooth mechanics. The necessity of this approach is presented to the reader through simple, represen tative examples. As things become more complex, the necessary material from convex and nonconvex optimization and from mechanics are introduced in a self-contained way. Unilateral contact and friction problems, adhesive contact and delamination problems, nonconvex elastoplasticity, fractal friction laws, frames with semi rigid connections, are among the applications which are treated in details here. Working algorithms are given for each application and are demonstrated by means of representative examples. The interested reader will find helpful references to up-to-date scientific and technical literature so that to be able to work on research or engineering topics which are not directly covered here.
Download or read book Variational and Quasi Variational Inequalities in Mechanics written by Alexander S. Kravchuk and published by Springer Science & Business Media. This book was released on 2007-09-04 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: The essential aim of this book is to consider a wide set of problems arising in the mathematical modeling of mechanical systems under unilateral constraints. In these investigations elastic and non-elastic deformations, friction and adhesion phenomena are taken into account. All the necessary mathematical tools are given: local boundary value problem formulations, construction of variational equations and inequalities and their transition to minimization problems, existence and uniqueness theorems, and variational transformations (Friedrichs and Young-Fenchel-Moreau) to dual and saddle-point search problems.
Download or read book Fourier BEM written by Fabian M.E. Duddeck and published by Springer Science & Business Media. This book was released on 2013-06-26 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Like FEM, the Boundary Element Method (BEM) provides a general numerical tool for the solution of complex engineering problems. In the last decades, the range of its applications has remarkably been enlarged. Therefore dynamic and nonlinear problems can be tackled. However they still demand an explicit expression of a fundamental solution, which is only known in simple cases. In this respect, the present book proposes an alternative BEM-formulation based on the Fourier transform, which can be applied to almost all cases relevant in engineering mechanics. The basic principle is presented for the heat equation. Applications are taken from solid mechanics (e.g. poroelasticity, thermoelasticity). Transient and stationary examples are given as well as linear and nonlinear. Completed with a mathematical and mechanical glossary, the book will serve as a comprehensive text book linking applied mathematics to real world engineering problems.
Download or read book Inverse and Crack Identification Problems in Engineering Mechanics written by Georgios E. Stavroulakis and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inverse and crack identification problems are of paramount importance for health monitoring and quality control purposes arising in critical applications in civil, aeronautical, nuclear, and general mechanical engineering. Mathematical modeling and the numerical study of these problems require high competence in computational mechanics and applied optimization. This is the first monograph which provides the reader with all the necessary information. Delicate computational mechanics modeling, including nonsmooth unilateral contact effects, is done using boundary element techniques, which have a certain advantage for the construction of parametrized mechanical models. Both elastostatic and harmonic or transient dynamic problems are considered. The inverse problems are formulated as output error minimization problems and they are theoretically studied as a bilevel optimization problem, also known as a mathematical problem with equilibrium constraints. Beyond classical numerical optimization, soft computing tools (neural networks and genetic algorithms) and filter algorithms are used for the numerical solution. The book provides all the required material for the mathematical and numerical modeling of crack identification testing procedures in statics and dynamics and includes several thoroughly discussed applications, for example, the impact-echo nondestructive evaluation technique. Audience: The book will be of interest to structural and mechanical engineers involved in nondestructive testing and quality control projects as well as to research engineers and applied mathematicians who study and solve related inverse problems. People working on applied optimization and soft computing will find interesting problems to apply to their methods and all necessary material to continue research in this field.