Download or read book The Application of Laboratory Automation Software and Hardware in Chemical Laboratories written by Louis A. Young and published by . This book was released on 1992 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Use of Computers for Laboratory Automation written by S. P. Maj and published by . This book was released on 1993 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Use of Computers for Laboratory Automation gives readers sufficient knowledge of computer systems and automation to enable them to read, and evaluate critically, technical literature and system specifications, thereby allowing the active participation in the selection, implementation, use and maintenance of computer systems in laboratories. The Use of Computers for Laboratory Automation addresses the fundamental concepts in computer engineering, software engineering and automation. It places the emphasis on principles of operation rather than on `product specific' details, which makes it independent and to a large degree `future-proof'. Particular attention is given to Laboratory Information Management Systems (LIMS) and the associated verification and valuation of computers in regulated (GLP) environments. The book is written in an approachable style, using simple technical language, making it easily accessible to scientists at all professional levels (licentiate, graduate, practising professional) and capacities (technician, analyst, technical manager etc.), and from many different disciplines.
Download or read book Laboratory Automation in the Chemical Indus written by David G. Cork and published by CRC Press. This book was released on 2002-04-02 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laboratory Information Management Systems written by R. D. McDowall and published by Sigma Press. This book was released on 1987 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive text on the practical aspects of laboratory information management systems (LIMS). LIMS provide online information about samples being analyzed in laboratories, collect information from laboratory instruments, process the results, schedule work, and carry out routine administrative tasks. This introduction to LIMS clearly illustrates how they are helping regulated industries achieve greater efficiency while conforming to good laboratory practices. Offers discussions and facts about decision criteria for installation, the computer hardware needed, choosing a supplier, interfacing with analytical equipment, and future trends. Also includes detailed coverage of implementation, databases, in-house developments, and applications in various industries.
Download or read book Open Source Lab written by Joshua M. Pearce and published by Newnes. This book was released on 2013-10-04 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Open-Source Lab: How to Build Your Own Hardware and Reduce Scientific Research Costs details the development of the free and open-source hardware revolution. The combination of open-source 3D printing and microcontrollers running on free software enables scientists, engineers, and lab personnel in every discipline to develop powerful research tools at unprecedented low costs.After reading Open-Source Lab, you will be able to: Lower equipment costs by making your own hardware Build open-source hardware for scientific research Actively participate in a community in which scientific results are more easily replicated and cited Numerous examples of technologies and the open-source user and developer communities that support them Instructions on how to take advantage of digital design sharing Explanations of Arduinos and RepRaps for scientific use A detailed guide to open-source hardware licenses and basic principles of intellectual property
Download or read book Manager s Survival Guide to Engineering Laboratory Automation written by Joseph G. Liscouski, 3rd and published by Delphinus, Inc.. This book was released on 2007-11 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes a methodology for developing and implementing a laboratory automation program. This material is important in chemistry, biotechnology, pharmaceutical, clinical and other scientific fields. The material covers the policies and practices, and the creation of laboratory automation architecture.
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 38 (thesis year 1993) a total of 13,787 thesis titles from 22 Canadian and 164 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 38 reports theses submitted in 1993, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.
Download or read book The Bishop and the Soldier written by and published by . This book was released on 1822 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Devices and Systems for Laboratory Automation written by Kerstin Thurow and published by John Wiley & Sons. This book was released on 2022-08-03 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Devices and Systems for Laboratory Automation Structured Overview on the Available Systems and Devices for Laboratory Automation Choosing the right systems and devices for the automation in any given laboratory is an essential part for the process to succeed. As relevant information to make an informed choice is not always readily available, a structured overview is essential for modern scientists. This book provides an introduction into laboratory automation and an overview of the necessary devices and systems. Sample topics discussed by the two well-qualified authors include: Specific requirements the automation needs to fulfill such as liquid delivery, low volume delivery, solid delivery, and sample preparation An overview on robots and mobile robots Common interfaces in laboratory automation For scientists and all individuals working in laboratories, the work serves as an indispensable resource in helping to make laboratory processes more streamlined, effective, and efficient.
Download or read book Laboratory Information Management Systems written by Christine Paszko and published by CRC Press. This book was released on 2018-06-08 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Details the most recent advances in Laboratory Information Management Systems. Offers contemporary approaches to system development, design, and installation; system customization; software and hardware compatibility; quality assurance and regulatory requirements; and resource utilization.
Download or read book Automating Science and Engineering Laboratories with Visual Basic written by Mark F. Russo and published by John Wiley & Sons. This book was released on 1999-03-31 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laboranten und Analytiker stehen häufig vor einem gravierenden Problem: Einerseits benötigen sie Steuerprogramme für Instrumente und einfache Software zur Sammlung, Speicherung und rudimentären Auswertung ihrer Daten - andererseits haben sie in der Regel keine Programmiererfahrung. Dieser Band erklärt die Visual-Basic-Entwicklungsumgebung so unkompliziert und praxisnah, daß jeder Wissenschaftler und Ingenieur in die Lage versetzt wird, grundlegende, für sein Problem maßgeschneiderte Anwendungen selbst zu erstellen. (05/99)
Download or read book Practical Pharmaceutical Laboratory Automation written by Brian D. Bissett and published by CRC Press. This book was released on 2003-05-23 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laboratory automation is an increasingly important part of the job description of many laboratory scientists. Although many laboratory scientists understand the methods and principles involved in automation, most lack the necessary engineering and programming skills needed to successfully automate or interface equipment in the lab. A step-by-step, how-to reference and guide, Practical Pharmaceutical Laboratory Automation explores the processes needed to automate the majority of tasks required in research today. The author discusses topics ranging from automated mathematical analysis to robotic automation of chemical processes, to combinations of these and other processes. He presents a detailed discussion of high throughput screening and assay development and takes an in-depth look at Visual Basic as the primary programming language used in laboratories. The text has a dedicated web site (http://www.pharmalabauto.com) that contains all the sample code and examples contained within the text as well as other information related to laboratory automation. Providing a starting point for tackling automation problems, Practical Pharmaceutical Laboratory Automation helps you develop a strategy for automation that gets consistent results.
Download or read book LIMS written by Richard Mahaffey and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computing and information management technologies touch our lives in the environments where we live, play and, work. High tech is becoming the standard. Those of use who work in a laboratory environment are faced with an obvious challenge. How do we best apply these technol ogies to make money for our companies? The first level of deliverable benefits is achieved through task automation. The second level is ob tained by integrating the individual islands of automation. The third, or top level, of benefits is related to applying intelligence to computing applications. The use of computing technology, at level one, to automate lab pro cedures, methods, and instruments has been profitable for many years. We can easily find yearly returns in the range of 10-50% for investments at this level. For level two, the integration of some applications has evolved and has led to data management systems and local area net working in the lab environment. Investment paybacks at level two are substantially higher, in the range of 200-400%. Examples of applications at the top level, that of intelligent systems and applications, are few and far between. And what about the payback for investments at this level? With such limited experience at level three, we can only estimate the benefits. But again, they appear to be much higher, in the range of 2000- 4000%.
Download or read book Laboratory Automation in the Chemical Indus written by David G. Cork and published by CRC Press. This book was released on 2002-04-02 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring extensive calculations and examples, this reference discusses theoretical and practical aspects of short-circuit currents in ac and dc systems, load flow, and harmonic analyses to provide a sound knowledge base for modern computer-based studies that can be utilized in real-world applications. Presenting more than 2300 figures, tables, and equations, the author explores matrix methods for network solutions and includes load flow and optimization techniques. He discusses ac and dc short-circuit systems calculations in accordance with standards set by the American National Standards Institute (ANSI) and the International Electrotechnical Commission (IEC).
Download or read book Sampling and Sample Preparation in Field and Laboratory written by Janusz Pawliszyn and published by Elsevier. This book was released on 2002-09-09 with total page 1170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title is the first comprehensive book on sampling and modern sample preparation techniques and has several main objectives: to facilitate recognition of sample preparation as both an integral part of the analytical process; to present a fundamental basis and unified theoretical approach for the professional development of sample preparation; to emphasize new developments in sample preparation technology; and to highlight the future impact of sample preparation on new directions in analytical science, particularly automation, miniaturization and field implementation. Until recently, there has been relatively little scientific interest in sampling and sample preparation, however this situation is presently changing as sampling and sample preparation become integral parts of the analytical process with their own unique challenges and research opportunities. Sampling and Sample Preparation for Field and Laboratory is an essential resource for all analytical chemists, and in particular those involved in method development. Not only does it cover the fundamental aspects of extraction, it also covers applications in various matrices and includes sampling strategies and equipment and how these can be integrated into the analytical process for maximum efficiency.
Download or read book The Status of the EPA Laboratory Automation Project written by William L. Budde and published by . This book was released on 1977 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book LIMS written by A S Nakagawa and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is currently a high level of interest in Laboratory Information Management Systems (LIMS), which, when successfully implemented, can revitalize the operations of a laboratory and contribute significantly to the effectiveness and efficiency of the overall enterprise. LIMS describes the strategy, planning, resources, and activities needed to integrate LIMS and its supporting technologies into an organization. It covers all aspects of implementation and management and has the benefit of not being product specific. This book will not date as it is not restricted to a particular software product, hardware platform, or technical automation approach. Instead it deals with the issues, expertise, organization, and resources that contribute to the successful implementation of LIMS. The author has wide experience of automated laboratory systems in the chemical, pharmaceutical, environmental, and biotechnology industries, and for the past 15 years has been intimately involved in every aspect of LIMS implementations including justification, system selection, installation, project management, developing, training, validation, performance optimization, and maintenance. LIMS contains numerous illustrations and tables to highlight concisely the major points and concepts discussed in each chapter. The book is essential reading for laboratory, information systems and project managers responsible for the implementation of LIMS and, as it does not require any previous knowledge of computers or laboratory information management systems, is easily accessible to all.
