Download or read book Physical Models written by Bill Addis and published by John Wiley & Sons. This book was released on 2020-11-02 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical models have been, and continue to be used by engineers when faced with unprecedented challenges, when engineering science has been non-existent or inadequate, and in any other situation when the engineer has needed to raise their confidence in a design proposal to a sufficient level to begin construction. For this reason, models have mostly been used by designers and constructors of highly innovative projects, when previous experience has not been available. The book covers the history of using of physical models in the design and development of civil and building engineering projects including bridges in the mid-18th century, William Fairbairn?s Britannia bridge in the 1840s, the masonry Aswan Dam in the 1890s, concrete dams in the 1920s, thin concrete shell roofs and the dynamic behaviour of tall buildings in earthquakes from the 1930s, tidal flow in estuaries and the acoustics of concert halls from the 1950s, and cable-net and membrane structures in the 1960s. Traditionally, progress in engineering has been attributed to the creation and use of engineering science, the understanding materials properties and the development of new construction methods. The book argues that the use of reduced scale models have played an equally important part in the development of civil and building engineering. However, like the history of engineering design itself, this crucial contribution has not been widely reported or celebrated. The book concludes with reviews of the current use of physical models alongside computer models, for example, in boundary layer wind tunnels, room acoustics, seismic engineering, hydrology, and air flow in buildings.
Download or read book Centrifuge Modelling for Civil Engineers written by Gopal Madabhushi and published by CRC Press. This book was released on 2014-07-28 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solve Complex Ground and Foundation Problems Presenting more than 25 years of teaching and working experience in a wide variety of centrifuge testing, the author of Centrifuge Modelling for Civil Engineers fills a need for information about this field. This text covers all aspects of centrifuge modelling. Expertly explaining the basic principles, the book makes this technique accessible to practicing engineers and researchers. Appeals to Non-Specialists and Specialists Alike Civil engineers that are new to the industry can refer to this material to solve complex geotechnical problems. The book outlines a generalized design process employed for civil engineering projects. It begins with the basics, and then moves on to increasingly complex methods and applications including shallow foundations, retaining walls, pile foundations, tunnelling beneath existing pile foundations, and assessing the stability of buildings and their foundations following earthquake-induced soil liquefaction. It addresses the use of modern imaging technique, data acquisition, and modelling techniques. It explains the necessary signal processing tools that are used to decipher centrifuge test data, and introduces the reader to the specialist aspects of dynamic centrifuge modelling used to study dynamic problems such as blast, wind, or wave loading with emphasis on earthquake engineering including soil liquefaction problems. Introduces the equipment and instrumentation used in centrifuge testing Presents in detail signal processing techniques such as smoothing and filtering Provides example centrifuge data that can be used for sample analysis and interpretation Centrifuge Modelling for Civil Engineers effectively describes the equipment, instrumentation, and signal processing techniques required to make the best use of the centrifuge modelling and test data. This text benefits graduate students, researchers, and practicing civil engineers involved with geotechnical issues.
Download or read book Geotechnical Centrifuge Technology written by R.N. Taylor and published by CRC Press. This book was released on 2018-10-08 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough review of this powerful and sophisticated technique for modelling soil structure interactions. It has been written by an international team of authors.
Download or read book Application of Centrifuge Modelling to Geotechnical Design written by William H. Craig and published by . This book was released on 1985 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Like New, No Highlights,No Markup,all pages are intact.
Download or read book Modeling in Geotechnical Engineering written by Pijush Samui and published by Academic Press. This book was released on 2020-12-01 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling in Geotechnical Engineering is a one stop reference for a range of computational models, the theory explaining how they work, and case studies describing how to apply them. Drawing on the expertise of contributors from a range of disciplines including geomechanics, optimization, and computational engineering, this book provides an interdisciplinary guide to this subject which is suitable for readers from a range of backgrounds. Before tackling the computational approaches, a theoretical understanding of the physical systems is provided that helps readers to fully grasp the significance of the numerical methods. The various models are presented in detail, and advice is provided on how to select the correct model for your application. - Provides detailed descriptions of different computational modelling methods for geotechnical applications, including the finite element method, the finite difference method, and the boundary element method - Gives readers the latest advice on the use of big data analytics and artificial intelligence in geotechnical engineering - Includes case studies to help readers apply the methods described in their own work
Download or read book Centrifuge Modelling for Civil Engineers written by Gopal Madabhushi and published by CRC Press. This book was released on 2017-09-06 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solve Complex Ground and Foundation Problems Presenting more than 25 years of teaching and working experience in a wide variety of centrifuge testing, the author of Centrifuge Modelling for Civil Engineers fills a need for information about this field. This text covers all aspects of centrifuge modelling. Expertly explaining the basic principles, the book makes this technique accessible to practicing engineers and researchers. Appeals to Non-Specialists and Specialists Alike Civil engineers that are new to the industry can refer to this material to solve complex geotechnical problems. The book outlines a generalized design process employed for civil engineering projects. It begins with the basics, and then moves on to increasingly complex methods and applications including shallow foundations, retaining walls, pile foundations, tunnelling beneath existing pile foundations, and assessing the stability of buildings and their foundations following earthquake-induced soil liquefaction. It addresses the use of modern imaging technique, data acquisition, and modelling techniques. It explains the necessary signal processing tools that are used to decipher centrifuge test data, and introduces the reader to the specialist aspects of dynamic centrifuge modelling used to study dynamic problems such as blast, wind, or wave loading with emphasis on earthquake engineering including soil liquefaction problems. Introduces the equipment and instrumentation used in centrifuge testing Presents in detail signal processing techniques such as smoothing and filtering Provides example centrifuge data that can be used for sample analysis and interpretation Centrifuge Modelling for Civil Engineers effectively describes the equipment, instrumentation, and signal processing techniques required to make the best use of the centrifuge modelling and test data. This text benefits graduate students, researchers, and practicing civil engineers involved with geotechnical issues.
Download or read book Recent Library Additions written by and published by . This book was released on 1990 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Disturbed Soil Properties and Geotechnical Design written by Andrew Noel Schofield and published by Thomas Telford. This book was released on 2005 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an easily accessible account of critical state of soil mechanics, geotechnical centrifuge testing and the original Cam-Clay model invented by the author.
Download or read book Ground Engineer s Reference Book written by Frederic Gladstone Bell and published by Butterworth-Heinemann. This book was released on 1987 with total page 1240 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The Ground Engineer's Reference Book provides the most comprehensive survey of ground engineering in a practical and assimilable form for the practicising engineer. It systematically covers all aspects of the subject: properties and behaviour of ground; investigation in ground engineering; treatment of the ground; construction in ground engineering; numerical methods and modelling in ground engineering. Each of the specialized contributions is supported by numerous references, diagrams and tables, and the book contains over 500 illustrations." --Book jacket.
Download or read book Geotechnical Centrifuge Technology written by R.N. Taylor and published by CRC Press. This book was released on 2003-09-02 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough review of this powerful and sophisticated technique for modelling soil structure interactions. It has been written by an international team of authors.
Download or read book Chinese Standard GB GB T GBT JB JB T YY HJ NB HG QC SL SN SH JJF JJG CJ TB YD YS NY FZ JG QB SJ SY DL AQ CB GY JC JR JT written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-01-01 with total page 7263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards and Industry Standards (Total 17,000 standards).
Download or read book Sustainable Construction Materials and Technologies written by Yoon-Moon Chun and published by CRC Press. This book was released on 2007-05-31 with total page 1756 pages. Available in PDF, EPUB and Kindle. Book excerpt: The construction materials industry is a major user of the world’s resources. While enormous progress has been made towards sustainability, the scope and opportunities for improvements are significant. To further the effort for sustainable development, a conference on Sustainable Construction Materials and Technologies was held at Coventry University, Coventry, U.K., from June 11th - 13th, 2007, to highlight case studies and research on new and innovative ways of achieving sustainability of construction materials and technologies. This book presents selected, important contributions made at the conference. Over 190 papers from over 45 countries were accepted for presentation at the conference, of which approximately 100 selected papers are published in this book. The rest of the papers are published in two supplementary books. Topics covered in this book include: sustainable alternatives to natural sand, stone, and Portland cement in concrete; sustainable use of recyclable resources such as fly ash, ground municipal waste slag, pozzolan, rice-husk ash, silica fume, gypsum plasterboard (drywall), and lime in construction; sustainable mortar, concrete, bricks, blocks, and backfill; the economics and environmental impact of sustainable materials and structures; use of construction and demolition wastes, and organic materials (straw bale, hemp, etc.) in construction; sustainable use of soil, timber, and wood products; and related sustainable construction and rehabilitation technologies.
Download or read book ICPMG2014 Physical Modelling in Geotechnics written by Christophe Gaudin and published by CRC Press. This book was released on 2019-01-08 with total page 1366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 8th International Conference on Physical Modelling in Geotechnics (ICPMG2014) was organised by the Centre for Offshore Foundation Systems at the University of Western Australia under the auspices of the Technical Committee 104 for Physical Modelling in Geotechnics of the International Society of Soil Mechanics and Geotechnical Engineering. This quadrennial conference is the traditional focal point for the physical modelling community of academics, scientists and engineers to present and exchange the latest developments on a wide range of physical modelling aspects associated with geotechnical engineering. These proceedings, together with the seven previous proceedings dating from 1988, present an inestimable collection of the technical and scientific developments and breakthroughs established over the last 25 years. These proceedings include 10 keynote lectures from scientific leaders within the physical modelling community and 160 peer-reviewed papers from 26 countries. They are organised in 14 themes, presenting the latest developments in physical modelling technology, modelling techniques and sensors, through a wide range of soil-structure interaction problems, including shallow and deep foundations, offshore geotechnics, dams and embankments, excavations and retaining structures and slope stability. Fundamental aspects of earthquake engineering, geohazards, ground reinforcements and improvements, and soil properties and behaviour are also covered, demonstrating the increasing complexity of modelling arising from state-of-the-art technological developments and increased understanding of similitude principles. A special theme on education presents the latest developments in the use of physical modelling techniques for instructing undergraduate and postgraduate students in geotechnical engineering.
Download or read book Physical Modelling in Geotechnics Volume 1 written by Andrew McNamara and published by CRC Press. This book was released on 2018-07-11 with total page 1370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical Modelling in Geotechnics collects more than 1500 pages of peer-reviewed papers written by researchers from over 30 countries, and presented at the 9th International Conference on Physical Modelling in Geotechnics 2018 (City, University of London, UK 17-20 July 2018). The ICPMG series has grown such that two volumes of proceedings were required to publish all contributions. The books represent a substantial body of work in four years. Physical Modelling in Geotechnics contains 230 papers, including eight keynote and themed lectures representing the state-of-the-art in physical modelling research in aspects as diverse as fundamental modelling including sensors, imaging, modelling techniques and scaling, onshore and offshore foundations, dams and embankments, retaining walls and deep excavations, ground improvement and environmental engineering, tunnels and geohazards including significant contributions in the area of seismic engineering. ISSMGE TC104 have identified areas for special attention including education in physical modelling and the promotion of physical modelling to industry. With this in mind there is a special themed paper on education, focusing on both undergraduate and postgraduate teaching as well as practicing geotechnical engineers. Physical modelling has entered a new era with the advent of exciting work on real time interfaces between physical and numerical modelling and the growth of facilities and expertise that enable development of so called ‘megafuges’ of 1000gtonne capacity or more; capable of modelling the largest and most complex of geotechnical challenges. Physical Modelling in Geotechnics will be of interest to professionals, engineers and academics interested or involved in geotechnics, geotechnical engineering and related areas. The 9th International Conference on Physical Modelling in Geotechnics was organised by the Multi Scale Geotechnical Engineering Research Centre at City, University of London under the auspices of Technical Committee 104 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). City, University of London, are pleased to host the prestigious international conference for the first time having initiated and hosted the first regional conference, Eurofuge, ten years ago in 2008. Quadrennial regional conferences in both Europe and Asia are now well established events giving doctoral researchers, in particular, the opportunity to attend an international conference in this rapidly evolving specialist area. This is volume 1 of a 2-volume set.
Download or read book Earthquake Blast and Impact written by Seced - The Society For Earthquake & Civil Engineering Dynamics and published by CRC Press. This book was released on 1991-08-22 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume consists of papers presented at the International Conference on Earthquake, Blast and Impact held at the University of Manchester Institute of Science and Technology, UK, 18-20 September 1991, organised by the Society for Earthquake and Civil Engineering Dynamics (SECED) and supported by the Institution of Civil Engineers, the Instituti
Download or read book Maintenance Monitoring Safety Risk and Resilience of Bridges and Bridge Networks written by Tulio Nogueira Bittencourt and published by CRC Press. This book was released on 2016-11-17 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintenance, Monitoring, Safety, Risk and Resilience of Bridges and Bridge Networks contains the lectures and papers presented at the Eighth International Conference on Bridge Maintenance, Safety and Management (IABMAS 2016), held in Foz do Iguaçu, Paraná, Brazil, 26-30 June, 2016. This volume consists of a book of extended abstracts and a DVD containing the full papers of 369 contributions presented at IABMAS 2016, including the T.Y. Lin Lecture, eight Keynote Lectures, and 360 technical papers from 38 countries. The contributions deal with the state-of-the-art as well as emerging concepts and innovative applications related to all main aspects of bridge maintenance, safety, management, resilience and sustainability. Major topics covered include: advanced materials, ageing of bridges, assessment and evaluation, bridge codes, bridge diagnostics, bridge management systems, composites, damage identification, design for durability, deterioration modeling, earthquake and accidental loadings, emerging technologies, fatigue, field testing, financial planning, health monitoring, high performance materials, inspection, life-cycle performance and cost, load models, maintenance strategies, non-destructive testing, optimization strategies, prediction of future traffic demands, rehabilitation, reliability and risk management, repair, replacement, residual service life, resilience, robustness, safety and serviceability, service life prediction, strengthening, structural integrity, and sustainability. This volume provides both an up-to-date overview of the field of bridge engineering as well as significant contributions to the process of making more rational decisions concerning bridge maintenance, safety, serviceability, resilience, sustainability, monitoring, risk-based management, and life-cycle performance using traditional and emerging technologies for the purpose of enhancing the welfare of society. It will serve as a valuable reference to all involved with bridge structure and infrastructure systems, including students, researchers and engineers from all areas of bridge engineering.
Download or read book Theory and Application of Hydraulic Modeling written by Taro Arikawa and published by CRC Press. This book was released on 2024-04-17 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume from Japan’s Research Subcommittee on Methodology for Dealing with Geomaterials in Hydraulic Model Experiments presents readers with a state-of-the-art overview of experimental and computational methods used to address similarity scaling incompatibilities present in fluid–sediment flows. Readers will gain an understanding of complex phenomena in the boundary fields of hydraulics and geotechnical engineering. Chapter contributors focus on the phenomena that are affected by the interactions between fluid wave and ground in a complex field, which for many years have been challenging to process and model. In addition to describing the implementation of model tests and the concept of the law of similarity, this book contrasts these phenomena with the laws of similarity, describes models and numeral analysis methods, and explains important considerations using experimental case studies. Each chapter is written by leading researchers in Japan who are members of the Research Subcommittee on Methodology for Dealing with Geomaterials in Hydraulic Model Experiments. The chapters are closely linked but are written so that each can be read individually. Readers will be able to apply this knowledge to their work and to create models that more accurately simulate the interactions between wave and ground, allowing them to better understand these phenomena and devise more appropriate strategies for defense and so on when necessary. This collection provides information that can be used by young researchers and post-graduate students in the boundary fields of hydraulics and geotechnical engineering who aim at becoming civil engineers, and it will be of particular value to practicing engineers of all experience levels who must regularly analyze complex interactions between fluids and ground.
