Download or read book The Agile Safety Case written by Thor Myklebust and published by Springer. This book was released on 2018-01-29 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: The safety case (SC) is one of the railway industry’s most important deliverables for creating confidence in their systems. This is the first book on how to write an SC, based on the standard EN 50129:2003. Experience has shown that preparing and understanding an SC is difficult and time consuming, and as such the book provides insights that enhance the training for writing an SC. The book discusses both "regular" safety cases and agile safety cases, which avoid too much documentation, improve communication between the stakeholders, allow quicker approval of the system, and which are important in the light of rapidly changing technology. In addition, it discusses the necessity of frequently updating software due to market requirements, changes in requirements and increased cyber-security threats. After a general introduction to SCs and agile thinking in chapter 1, chapter 2 describes the majority of the roles that are relevant when developing railway-signaling systems. Next, chapter 3 provides information related to the assessment of signaling systems, to certifications based on IEC 61508 and to the authorization of signaling systems. Chapter 4 then explains how an agile safety plan satisfying the requirements given in EN 50126-1:1999 can be developed, while chapter 5 provides a brief introduction to safety case patterns and notations. Lastly, chapter 6 combines all this and describes how an (agile) SC can be developed and what it should include. To ensure that infrastructure managers, suppliers, consultants and others can take full advantage of the agile mind-set, the book includes concrete examples and presents relevant agile practices. Although the scope of the book is limited to signaling systems, the basic foundations for (agile) SCs are clearly described so that they can also be applied in other cases.

Download or read book SafeScrum Agile Development of Safety Critical Software written by Geir Kjetil Hanssen and published by Springer. This book was released on 2018-11-23 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the development of safety-critical software and to this end proposes the SafeScrum® methodology. SafeScrum® was inspired by the agile method Scrum, which is extensively used in many areas of the software industry. Scrum is, however, not intended or designed for use with safety-critical systems; hence the authors propose guidelines and additions to make it both practically useful and compliant with the additional requirements found in safety standards. The book provides an overview of agile software development and how it can be linked to safety and relevant safety standards. SafeScrum® is described in detail as a useful approach for reaping the benefits of agile methods, and is intended as a set of ideas and a basis for adaptation in industry projects. The book covers roles, processes and practices, and documentation. It also includes tips on how standard software process tools can be employed. Lastly, some insights into relevant research in this new and emerging field are provided, and selected real-world examples are presented. The ideas and descriptions in this book are based on collaboration with the industry, in the form of discussions with assessment organizations, general discussions within the research fields of safety and software, and last but not least, the authors’ own experiences and ideas. It was mainly written for practitioners in industry who know a great deal about how to produce safety-critical software but less about agile development in general and Scrum in particular.

Download or read book Agile Methods for Safety Critical Systems written by Nancy Van Schooenderwoert and published by Createspace Independent Publishing Platform. This book was released on 2018-06-04 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, packed with real-world insights and direct experiences, is for managers who want the benefits of Agile but also must address regulatory compliance, integration of software with other disciplines, and product safety. In it, we combine our understanding of Agile development, hardware/software integration, and regulatory requirements. We know that Agile is simple but not easy; leadership is crucial to make this change spread. We aim to show how you can navigate the transition.

Download or read book Computer Safety Reliability and Security written by Amund Skavhaug and published by Springer. This book was released on 2016-09-01 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of four workshops co-located with SAFECOMP 2016, the 35th International Conference on Computer Safety, Reliability, and Security, held in Trondheim, Norway, in September 2016. The 30 revised full papers presented together with 4 short and 5 invited papers were carefully reviewed and selected from numerous submissions. This year’s workshop are: ASSURE 2016 - Assurance Cases for Software-intensive Systems; DECSoS 2016 - EWICS/ERCIM/ARTEMIS Dependable Cyber-physical Systems and Systems-of-Systems Workshop; SASSUR 2016 - Next Generation of System Assurance Approaches for Safety-Critical Systems; and TIPS 2016 – Timing Performance in Safety Engineering.

Download or read book Functional Safety and Proof of Compliance written by Thor Myklebust and published by Springer Nature. This book was released on 2022-01-03 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to facilitate and improve development work related to all documents and information required by functional safety standards. Proof of Compliance (PoC) is important for the assessor and certification bodies when called up to confirm that the manufacturer has developed a software system according to the required safety standards. While PoC documents add functionality to the product neither for the developer nor for the customer, they do add confidence and trust to the product and ease certification, and as such are important for the product’s value. In spite of this added value, the documentation needed for PoC is often developed late in the project and in a haphazard manner. This book aims at developers, assessors, certification bodies, and purchasers of safety instrumented systems and informs the reader about the most important PoC documents. A typical PoC documentation encompasses 50 to 200 documents, several of which are named in the safety standards (e.g., 82 documents in IEC 61508:2010 series, 101 documents in EN 5012X series and 106 work products in ISO 26262:2018 series). These documents also include further references, typically one to twenty of them, and the total number of pages developed by the manufacturer varies between 2000 and 10000 pages. The book provides guidance and examples what to include in the relevant plans and documents.

Download or read book Safety and Reliability Theory and Applications written by Marko Cepin and published by CRC Press. This book was released on 2017-06-14 with total page 3668 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety and Reliability – Theory and Applications contains the contributions presented at the 27th European Safety and Reliability Conference (ESREL 2017, Portorož, Slovenia, June 18-22, 2017). The book covers a wide range of topics, including: • Accident and Incident modelling • Economic Analysis in Risk Management • Foundational Issues in Risk Assessment and Management • Human Factors and Human Reliability • Maintenance Modeling and Applications • Mathematical Methods in Reliability and Safety • Prognostics and System Health Management • Resilience Engineering • Risk Assessment • Risk Management • Simulation for Safety and Reliability Analysis • Structural Reliability • System Reliability, and • Uncertainty Analysis. Selected special sessions include contributions on: the Marie Skłodowska-Curie innovative training network in structural safety; risk approaches in insurance and fi nance sectors; dynamic reliability and probabilistic safety assessment; Bayesian and statistical methods, reliability data and testing; oganizational factors and safety culture; software reliability and safety; probabilistic methods applied to power systems; socio-technical-economic systems; advanced safety assessment methodologies: extended Probabilistic Safety Assessment; reliability; availability; maintainability and safety in railways: theory & practice; big data risk analysis and management, and model-based reliability and safety engineering. Safety and Reliability – Theory and Applications will be of interest to professionals and academics working in a wide range of industrial and governmental sectors including: Aeronautics and Aerospace, Automotive Engineering, Civil Engineering, Electrical and Electronic Engineering, Energy Production and Distribution, Environmental Engineering, Information Technology and Telecommunications, Critical Infrastructures, Insurance and Finance, Manufacturing, Marine Industry, Mechanical Engineering, Natural Hazards, Nuclear Engineering, Offshore Oil and Gas, Security and Protection, Transportation, and Policy Making.

Download or read book Safety Cases and Safety Reports written by Mr Richard Maguire and published by Ashgate Publishing, Ltd.. This book was released on 2012-10-01 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: The safety case and its associated reports are quickly becoming not only a mechanism for achieving safety goals, but also a valuable decision-support asset, and a vital industrial liability management tool. Recent developments in industry have led to safety cases being frequently required as contractual deliverables as part of large and complex commercial programmes. A safety case consists of a rational argument and detailed evidence to justify and demonstrate that a system or product is tolerably safe in its use, and that it has a management programme to ensure that this remains so. The safety case report is the snap-shot presentation of the arguments and evidence demonstrating the contemporary safety performance of the system and the programme that is in place. This book, written from personal experience and reference, provides a concentrated source document for assessing and constructing safety cases and safety case reports - from understanding their purposes, through their development and on to their presentation.

Download or read book Systems Software and Services Process Improvement written by Jakub Stolfa and published by Springer. This book was released on 2017-08-23 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes the refereed proceedings of the 24th EuroSPI conference, held in Ostrava, Czech Republic, in September 2017.The 56 revised full papers presented were carefully reviewed and selected from 97 submissions. They are organized in topical sections on SPI and VSEs, SPI and process models, SPI and safety, SPI and project management, SPI and implementation, SPI issues, SPI and automotive, selected key notes and workshop papers, GamifySPI, SPI in Industry 4.0, best practices in implementing traceability, good and bad practices in improvement, safety and security, experiences with agile and lean, standards and assessment models, team skills and diversity strategies.

Download or read book Safety and Security Engineering IX written by G. Passerini and published by WIT Press. This book was released on 2022-01-18 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Formed of papers originating from the 9th International Conference on Safety and Security Engineering, this book highlights research and industrial developments in the theoretical and practical aspects of safety and security engineering. Safety and Security Engineering, due to its special nature, is an interdisciplinary area of research and application that brings together, in a systematic way, many disciplines of engineering from the traditional to the most technologically advanced. This volume covers topics such as crisis management, security engineering, natural disasters and emergencies, terrorism, IT security, man-made hazards, risk management, control, protection and mitigation issues. The meeting aims to attract papers in all related fields, in addition to those listed under the Conference Topics, as well as case studies describing practical experiences. Due to the multitude and variety of topics included, the list is only indicative of the themes of the expected papers. Authors are encouraged to submit abstracts in all areas of Safety and Security, with particular attention to integrated and interdisciplinary aspects. Specific themes include: Risk analysis and assessment; Safety engineering; Accident monitoring and management; Information and communication security; Protection of personal information; Fire safety; Disaster and emergency management; Critical infrastructure; Counter-terrorism; Occupational health; Transportation safety and security; Earthquakes and natural hazards; Surveillance systems; Safety standards and regulations; Cybersecurity / e-security; Safety and security culture; Border security; Disaster recovery.

Download or read book Agile Processes in Software Engineering and Extreme Programming written by Casper Lassenius and published by Springer. This book was released on 2015-05-15 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the refereed proceedings of the 16th International Conference on Agile Software Development, XP 2015, held in Helsinki, Finland, in May 2015. While agile development has already become mainstream in industry, this field is still constantly evolving and continues to spur an enormous interest both in industry and academia. The XP conference series has always played, and continues to play, an important role in connecting the academic and practitioner communities, providing a forum for both formal and informal sharing and development of ideas, experiences, and opinions. The theme of XP 2015 "Delivering Value: Moving from Cyclic to Continuous Value Delivery" reflects the modern trend towards organizations that are simultaneously very efficient and flexible in software development and delivery. The 15 full and 7 short papers accepted for XP 2015 were selected from 44 submissions. All of the submitted papers went through a rigorous peer-review process. Additionally, 11 experience reports were selected from 45 proposals, and in each case the authors were shepherded by an experienced researcher.

Download or read book Agile Software Requirements written by Dean Leffingwell and published by Addison-Wesley Professional. This book was released on 2010-12-27 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt: “We need better approaches to understanding and managing software requirements, and Dean provides them in this book. He draws ideas from three very useful intellectual pools: classical management practices, Agile methods, and lean product development. By combining the strengths of these three approaches, he has produced something that works better than any one in isolation.” –From the Foreword by Don Reinertsen, President of Reinertsen & Associates; author of Managing the Design Factory; and leading expert on rapid product development Effective requirements discovery and analysis is a critical best practice for serious application development. Until now, however, requirements and Agile methods have rarely coexisted peacefully. For many enterprises considering Agile approaches, the absence of effective and scalable Agile requirements processes has been a showstopper for Agile adoption. In Agile Software Requirements, Dean Leffingwell shows exactly how to create effective requirements in Agile environments. Part I presents the “big picture” of Agile requirements in the enterprise, and describes an overall process model for Agile requirements at the project team, program, and portfolio levels Part II describes a simple and lightweight, yet comprehensive model that Agile project teams can use to manage requirements Part III shows how to develop Agile requirements for complex systems that require the cooperation of multiple teams Part IV guides enterprises in developing Agile requirements for ever-larger “systems of systems,” application suites, and product portfolios This book will help you leverage the benefits of Agile without sacrificing the value of effective requirements discovery and analysis. You’ll find proven solutions you can apply right now–whether you’re a software developer or tester, executive, project/program manager, architect, or team leader.

Download or read book Computer Safety Reliability and Security SAFECOMP 2023 Workshops written by Jérémie Guiochet and published by Springer Nature. This book was released on 2023-10-15 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the Workshops held in conjunction with SAFECOMP 2023, held in Toulouse, France, during September 19, 2023. The 35 full papers included in this volume were carefully reviewed and selected from 49 submissions. - - 8th International Workshop on Assurance Cases for Software-intensive Systems (ASSURE 2023) - - 18th International Workshop on Dependable Smart Embedded and Cyber-Physical Systems and Systems-of-Systems (DECSoS 2023) - - 10th International Workshop on Next Generation of System Assurance Approaches for Critical Systems (SASSUR 2023) - - Second International Workshop on Security and Safety Interactions (SENSEI 2023) - - First International Workshop on Safety/ Reliability/ Trustworthiness of Intelligent Transportation Systems (SRToITS 2023) - - 6th International Workshop on Artificial Intelligence Safety Engineering (WAISE 2023)

Download or read book Scaling Software Agility written by Dean Leffingwell and published by Pearson Education. This book was released on 2007-02-26 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Companies have been implementing large agile projects for a number of years, but the ‘stigma’ of ‘agile only works for small projects’ continues to be a frequent barrier for newcomers and a rallying cry for agile critics. What has been missing from the agile literature is a solid, practical book on the specifics of developing large projects in an agile way. Dean Leffingwell’s book Scaling Software Agility fills this gap admirably. It offers a practical guide to large project issues such as architecture, requirements development, multi-level release planning, and team organization. Leffingwell’s book is a necessary guide for large projects and large organizations making the transition to agile development.” —Jim Highsmith, director, Agile Practice, Cutter Consortium, author of Agile Project Management “There’s tension between building software fast and delivering software that lasts, between being ultra-responsive to changes in the market and maintaining a degree of stability. In his latest work, Scaling Software Agility, Dean Leffingwell shows how to achieve a pragmatic balance among these forces. Leffingwell’s observations of the problem, his advice on the solution, and his description of the resulting best practices come from experience: he’s been there, done that, and has seen what’s worked.” —Grady Booch, IBM Fellow Agile development practices, while still controversial in some circles, offer undeniable benefits: faster time to market, better responsiveness to changing customer requirements, and higher quality. However, agile practices have been defined and recommended primarily to small teams. In Scaling Software Agility, Dean Leffingwell describes how agile methods can be applied to enterprise-class development. Part I provides an overview of the most common and effective agile methods. Part II describes seven best practices of agility that natively scale to the enterprise level. Part III describes an additional set of seven organizational capabilities that companies can master to achieve the full benefits of software agility on an enterprise scale. This book is invaluable to software developers, testers and QA personnel, managers and team leads, as well as to executives of software organizations whose objective is to increase the quality and productivity of the software development process but who are faced with all the challenges of developing software on an enterprise scale.

Download or read book Agile Model Based Systems Engineering Cookbook written by Dr. Bruce Powel Douglass and published by Packt Publishing Ltd. This book was released on 2021-03-31 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Worried about the growing complexity of systems in your organization? Manage it with recipes for applying agile methodologies and techniques in model-based systems engineering (MBSE) Key Features Learn how Agile and MBSE can work iteratively and collaborate to overcome system complexity Develop essential systems engineering products and achieve crucial enterprise objectives with easy-to-follow recipes Build efficient system engineering models using tried and trusted best practices Book DescriptionAgile MBSE can help organizations manage constant change and uncertainty while continuously ensuring system correctness and meeting customers’ needs. But deploying it isn’t easy. Agile Model-Based Systems Engineering Cookbook is a little different from other MBSE books out there. This book focuses on workflows – or recipes, as the author calls them – that will help MBSE practitioners and team leaders address practical situations that are part of deploying MBSE as part of an agile development process across the enterprise. Written by Dr. Bruce Powel Douglass, a world-renowned expert in MBSE, this book will take you through important systems engineering workflows and show you how they can be performed effectively with an agile and model-based approach. You’ll start with the key concepts of agile methods for systems engineering, but we won’t linger on the theory for too long. Each of the recipes will take you through initiating a project, defining stakeholder needs, defining and analyzing system requirements, designing system architecture, performing model-based engineering trade studies, all the way to handling systems specifications off to downstream engineering. By the end of this MBSE book, you’ll have learned how to implement critical systems engineering workflows and create verifiably correct systems engineering models.What you will learn Apply agile methods to develop systems engineering specifications Perform functional analysis with SysML Derive and model systems architectures from key requirements Model crucial engineering data to clarify systems requirements Communicate decisions with downstream subsystem implementation teams Verify specifications with model reviews and simulations Ensure the accuracy of systems models through model-based testing Who this book is for If you are a systems engineer who wants to pursue model-based systems engineering in an agile setting, this book will show you how you can do that without breaking a sweat. Fundamental knowledge of SysML is necessary; the book will teach you the rest.

Download or read book Systems Software and Services Process Improvement written by Murat Yilmaz and published by Springer Nature. This book was released on 2020-08-10 with total page 851 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes the refereed proceedings of the 27th European Conference on Systems, Software and Services Process Improvement, EuroSPI conference, held in Düsseldorf, Germany, in September 2020*. The 50 full papers and 13 short papers presented were carefully reviewed and selected from 100 submissions. They are organized in topical sections on ​visionary papers, SPI manifesto and improvement strategies, SPI and emerging software and systems engineering paradigms, SPI and standards and safety and security norms, SPI and team performance & agile & innovation, SPI and agile, emerging software engineering paradigms, digitalisation of industry, infrastructure and e-mobility, good and bad practices in improvement, functional safety and cybersecurity, experiences with agile and lean, standards and assessment models, recent innovations, virtual reality. *The conference was partially held virtually due to the COVID-19 pandemic.

Download or read book Safety and Security of Cyber Physical Systems written by Frank J. Furrer and published by Springer Nature. This book was released on 2022-07-20 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cyber-physical systems (CPSs) consist of software-controlled computing devices communicating with each other and interacting with the physical world through sensors and actuators. Because most of the functionality of a CPS is implemented in software, the software is of crucial importance for the safety and security of the CPS. This book presents principle-based engineering for the development and operation of dependable software. The knowledge in this book addresses organizations that want to strengthen their methodologies to build safe and secure software for mission-critical cyber-physical systems. The book: • Presents a successful strategy for the management of vulnerabilities, threats, and failures in mission-critical cyber-physical systems; • Offers deep practical insight into principle-based software development (62 principles are introduced and cataloged into five categories: Business & organization, general principles, safety, security, and risk management principles); • Provides direct guidance on architecting and operating dependable cyber-physical systems for software managers and architects.

Download or read book Safety Cases and Safety Reports written by Richard Maguire and published by CRC Press. This book was released on 2017-05-15 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: The safety case and its associated reports are quickly becoming not only a mechanism for achieving safety goals, but also a valuable decision-support asset, and a vital industrial liability management tool. Recent developments in industry have led to safety cases being frequently required as contractual deliverables as part of large and complex commercial programmes. A safety case consists of a rational argument and detailed evidence to justify and demonstrate that a system or product is tolerably safe in its use, and that it has a management programme to ensure that this remains so. The safety case report is the snap-shot presentation of the arguments and evidence demonstrating the contemporary safety performance of the system and the programme that is in place. This book, written from personal experience and reference, provides a concentrated source document for assessing and constructing safety cases and safety case reports - from understanding their purposes, through their development and on to their presentation.