Download or read book Textures and Microstructures in Recrystallized Rocks written by Florian Karl Heidelbach and published by . This book was released on 1994 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Practical Guide to Rock Microstructure written by Ron H. Vernon and published by Cambridge University Press. This book was released on 2004-10-07 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock microstructures provide clues for the interpretation of rock history. A good understanding of the physical or structural relationships of minerals and rocks is essential for making the most of more detailed chemical and isotopic analyses of minerals. Ron Vernon discusses the basic processes responsible for the wide variety of microstructures in igneous, sedimentary, metamorphic and deformed rocks, using high-quality colour illustrations. He discusses potential complications of interpretation, emphasizing pitfalls, and focussing on the latest techniques and approaches. Opaque minerals (sulphides and oxides) are referred to where appropriate. The comprehensive list of relevant references will be useful for advanced students wishing to delve more deeply into problems of rock microstructure. Senior undergraduate and graduate students of mineralogy, petrology and structural geology will find this book essential reading, and it will also be of interest to students of materials science.
Download or read book Deformation Microstructures and Mechanisms in Minerals and Rocks written by Tom G. Blenkinsop and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a systematic guide to the recognition and interpretation of deformation microstructures and mechanisms in minerals and rocks at the scale of a thin section. Diagnostic features of microstructures and mechanisms are emphasized, and the subject is extensively illustrated with high-quality color and black and white photomicrographs, and many clear diagrams. After introducing three main classes of deformation microstructures and mechanisms, low- to high-grade deformation is presented in a logical sequence in Chapters 2 to 5. Magmatic/submagmatic deformation, shear sense indicators, and shock microstructures and metamorphism are described in Chapters 6 to 8, which are innovative chapters in a structural geology textbook. The final chapter shows how deformation microstructures and mechanisms can be used quantitatively to understand the behavior of the earth. Recent experimental research on failure criteria, frictional sliding laws, and flow laws is summarized in tables, and palaeopiezometry is discussed. Audience: This book is essential to all practising structural and tectonic geologists who use thin sections, and is an invaluable research tool for advanced undergraduates, postgraduates, lecturers and researchers in structural geology and tectonics.
Download or read book A Practical Guide to Rock Microstructure written by Ron H. Vernon and published by Cambridge University Press. This book was released on 2018-12-06 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: A richly illustrated survey of rock microstructures in igneous, metamorphic and sedimentary rocks, from basic concepts to cutting-edge research.
Download or read book Preferred Orientation in Deformed Metal and Rocks written by Hans Rudolf Wenk and published by Elsevier. This book was released on 2013-10-22 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides an introduction to the texture analysis of deformed materials and explores methods of determining and interpreting the preferred orientation of crystals in deformed polycrystalline aggregates.**The book reviews: 1) the techniques, procedures, and theoretical basis for the accumulation and analysis of orientation data; 2)the processes by which polycrystals deform and the microstructural mechanisms responsible for the development of the preferred orientation; 3) the textures in specific systems and application of principles to the solution of specific problems.**With a combination of metallurgic and geologic applications, Preferred Orientation in Deformed Metals and Rocks: An Introduction to Modern Texture Analysis will be an important source book for students and researchers in materials science, solid state physics, structural geology, and geophysics.**FROM THE PREFACE: Determination and interpretation of the preferred orientation of crystals in deformed polycrystalline aggregates (in this volume also referred to as texture) has been of longstanding concern to both materials scientists and geologists. A similar theoretical background--such as the dislocation theory of crystal plasticity--has been the basis of understanding flow in metals and rocks; and similar determinative techniques--including microscopy and x-ray diffraction--have been used to study textures and microstructures. Whereas many of the fundamental principles have been established early this century by scientists such as Jeffery, Sachs, Sander, Schmid, Schmidt, and Taylor, only in recent years has knowledge reached a level that provides a quantitative framework which has replaced a largely phenomenological approach. This is expressed in the sudden new emphasis on textural studies, as documented by the large number of recent publications.**This volume contains material to serve as an introduction for those who wish to enter this field as well as reviews for those who are already engaged in advanced research....**The book is divided into three parts. The first (Chapters 2*b17) deals with techniques, procedures, and theoretical bases for the accumulation and analysis of orientation data. The second (Chapters 8*b112) introduces processes by which polycrystals deform and the microstructural mechanisms responsible for the development of the preferred orientation. All those chapters emphasize basic principles and apply to metals as well as to minerals. The third part (Chapters 13*b126) illustrates textures in specific systems and the application of the principles set out in the earlier chapters to the solution of specific problems. Readers of these chapters will quickly become aware that metals have been more exhaustively studied than minerals; but they will also realize that, because of their structural symmetry, metals are in general much simpler than rocks and that the intepretation of metal textures is less involved. An extensive list of relevant references provides access to much of the original literature on textures....
Download or read book Deformation Mechanisms Rheology and Tectonics written by Siese de Meer and published by Geological Society of London. This book was released on 2002 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: The motion and deformation of rocks are processes of fundamental importance in shaping the Earth, from outer crustal layers to the deep mantle. Reconstructions of the evolution of the Earth therefore require detailed knowledge of the geometry of deformation structures and their relative timing, of the motions leading to deformation structures and of the mechanisms governing these motions. This volume contains a collection of 22 papers on field, experimental and theoretical studies that add to our knowledge of these processes.
Download or read book Mineral and Rock Deformation written by Bruce E. Hobbs and published by American Geophysical Union. This book was released on 1986 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recrystallization and Related Annealing Phenomena written by F.J. Humphreys and published by Elsevier. This book was released on 2012-12-02 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: The annealing of deformed materials is of both technological importance and scientific interest. The phenomena have been most widely studied in metals, although they occur in all crystalline materials such as the natural deformation of rocks and the processing of technical ceramics. Research is mainly driven by the requirements of industry, and where appropriate, the book discusses the extent to which we are able to formulate quantitative, physically-based models which can be applied to metal-forming processes.The subjects treated in this book are all active research areas, and form a major part of at least four regular international conference series. However, there have only been two monographs published in recent times on the subject of recrystallization, the latest nearly 20 years ago. Since that time, considerable advances have been made, both in our understanding of the subject and in the techniques available to the researcher.The book covers recovery, recrystallization and grain growth in depth including specific chapters on ordered materials, two-phase alloys, annealing textures and annealing during and after hot working. Also contained are treatments of the deformed state and the structure and mobility of grain boundaries, technologically important examples and a chapter on computer simulation and modelling. The book provides a scientific treatment of the subject for researchers or students in Materials Science, Metallurgy and related disciplines, who require a more detailed coverage than is found in textbooks on physical metallurgy, and a more coherent treatment than will be found in the many conference proceedings and review articles.
Download or read book Metamorphic Textures written by Alan Spry and published by Elsevier. This book was released on 2013-10-22 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metamorphic Textures provides definitions, descriptions and illustrations of metamorphic textures, as well as the fundamental processes involved in textural development. This book is composed of 11 chapters and begins with a presentation of the metamorphic processes and the production of metamorphic minerals. The subsequent chapters describe the structural classification of grain boundaries, the metamorphic reactions, mineral transformations, and the crystallization and recrystallization of metamorphic rocks. These topics are followed by the texture examination of thermal metamorphic rocks and minerals and the preferred orientations of these rocks, particularly the dimensional and lattice preferred orientation. Other chapters survey the textures of rocks under dynamic and shock metamorphism. The final chapters describe the textures of regional and polymetamorphism. This book will be of great use to petrologists, physicists, and graduate and undergraduate petrology students.
Download or read book Applications of Texture Analysis written by A. D. Rollett and published by John Wiley & Sons. This book was released on 2008-12-05 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains papers presented at The 15th International Conference on the Texture of Materials from June 1-5th, 2008 in Pittsburgh, PA. Chapters include: Thin Films Texture at Non-Ambient Conditions Novel Texture Measurement Techniques Including 3D Complex Oxides Interface Textures Recrystallization Texture Biomaterials Texture Effects on Damage Accumulation Digital Microstructures View information on Materials Processing and Texture: Ceramic Transactions, Volume 200.
Download or read book Introduction to Metamorphic Textures and Microstructures written by A. J. Barker and published by Psychology Press. This book was released on 1998 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the thin section description and interpretation of metamorphic rocks, their textures, and microstructures, for advanced undergraduate and graduate geology students. Sections cover some of the broader aspects of metamorphism and metamorphic rocks, the basics of description and interpretation of the textural/microstructural features from the simplest to the more complex, and advanced interpretations in polydeformed and polymetamorphosed rocks. Also available in paper (02414-2), $29.95. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book Introduction to Metamorphic Textures and Microstructures written by A.J. Barker and published by Routledge. This book was released on 2013-12-19 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: A text which aims to help undergraduate students in geology to recognize and interpret metamorphic textures and microstructures in thin-section. For lecturers and postgraduates in geology and petrology, the book provides reference for the interpretation of metamorphic rocks.
Download or read book Fault related Rocks written by Arthur W. Snoke and published by Princeton University Press. This book was released on 2014-07-14 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a richly illustrated reference book that provides a unique, comprehensive, and up-to-date survey of the rocks and structures of fault and shear zones. These zones are fundamental geologic structures in the Earth's crust. Their rigorous analysis is crucial to understanding the kinematics and dynamics of the continental and oceanic crust, the nature of earthquakes, and the formation of gold and hydrocarbon deposits. To document the variety of fault-related rocks, the book presents more than six hundred photographs of structures ranging in scale from outcrop to submicroscopic. These are accompanied by detailed explanations, often including geologic maps and cross sections, contributed by over 125 geoscientists from around the world. The book opens with an extensive introduction by Arthur W. Snoke and Jan Tullis that is itself a major contribution to the field. Fault-related rocks and their origins have long been controversial and subject to inconsistent terminology. Snoke and Tullis address these problems by presenting the currently accepted ideas in the field, focusing on deformation mechanisms and conceptual models for fault and shear zones. They define common terminology and classifications and present a list of important questions for future research. In the main, photographic part of the book, the editors divide the contributions into three broad categories, covering brittle behavior, semi-brittle behavior, and ductile behavior. Under these headings, there are contributions on dozens of subtopics with photographs from localities around the world, including several "type" areas. The book is an unrivaled source of information about fault-related rocks and will be important reading for a broad range of earth scientists, including structural geologists, petrologists, geophysicists, and environmental specialists. Originally published in 1998. The Princeton Legacy Library uses the latest print-on-demand technology to again make available previously out-of-print books from the distinguished backlist of Princeton University Press. These editions preserve the original texts of these important books while presenting them in durable paperback and hardcover editions. The goal of the Princeton Legacy Library is to vastly increase access to the rich scholarly heritage found in the thousands of books published by Princeton University Press since its founding in 1905.
Download or read book Mineral and Rock Deformation written by Bruce E. Hobbs and published by American Geophysical Union. This book was released on 1986 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ductile Shear Zones written by Soumyajit Mukherjee and published by John Wiley & Sons. This book was released on 2015-10-05 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: The elucidation of the mechanisms and kinematics of shear zone deformation, at both local and regional scales, is the subject of a great deal of interest to scientists in the hydrocarbon industry, in seismology, and in structural geology more generally. This book comprises a collection of five theoretical and twelve regional contributions to the subject from a number of leading researchers in the field, with particular emphasis on work carried out in the Indian subcontinent. The book will be invaluable to advances students and researchers involved in the kinematics of shear.
Download or read book Encyclopedia of Geology written by and published by Academic Press. This book was released on 2020-12-16 with total page 5634 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encyclopedia of Geology, Second Edition presents in six volumes state-of-the-art reviews on the various aspects of geologic research, all of which have moved on considerably since the writing of the first edition. New areas of discussion include extinctions, origins of life, plate tectonics and its influence on faunal provinces, new types of mineral and hydrocarbon deposits, new methods of dating rocks, and geological processes. Users will find this to be a fundamental resource for teachers and students of geology, as well as researchers and non-geology professionals seeking up-to-date reviews of geologic research. Provides a comprehensive and accessible one-stop shop for information on the subject of geology, explaining methodologies and technical jargon used in the field Highlights connections between geology and other physical and biological sciences, tackling research problems that span multiple fields Fills a critical gap of information in a field that has seen significant progress in past years Presents an ideal reference for a wide range of scientists in earth and environmental areas of study
Download or read book Atlas of Deformational and Metamorphic Rock Fabrics written by G. J. Borradaile and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: In May 1976 Lucian B. Platt organized a highly successful Penrose Confer ence on The Formation of Rock Cleavage at Bryn Mawr College in Penn sylvania, U. S. A. The meeting drew together about 70 specialists from both sides of the Atlantic and from Australasia, who contributed discussions on various aspects of rock cleavage and its formation. Even early in the meet ing it became clear to the participants that they lacked a common terminol ogy, that often the same technical word implied different things to different people and that observables and descriptors were loosely defined. In an at tempt to improve communication the present editors contacted about 190 workers after the conference with a view to compiling a set of photographs with captions to illustrate exactly what workers were talking about. As a re sult the compilation was published as a limited edition by an inexpensive offset process at the University of Tasmania. The success of that provisional edition of the Atlas of Rock Cleavage and the responses of the readers prompted us to make a more extensive collection of material, contact a wider range of workers and, with the support of Dr. Konrad Springer, to publish the present higher-quality reproduction of the contributors' plates.
