Download or read book Texture and Anisotropy written by U. F. Kocks and published by Cambridge University Press. This book was released on 2000-08-15 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: A successful book covering an important area of materials science, now available in paperback.

Download or read book Texture and Anisotropy of Polycrystals III written by Helmut Klein and published by Trans Tech Publications Ltd. This book was released on 2010-02-03 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: The great majority of solid-state materials – natural as well as man-made ones – have a polycrystalline structure. They consist of crystallites having various sizes, shapes and crystallographic orientations. Because of the anisotropy of crystal properties, the material as a whole may also be anisotropic if the orientation distribution of the crystallites is not random. Furthermore, because of the differently oriented anisotropies of neighbouring crystals, the material is also micro-inhomogeneous. Macroscopic anisotropy and micro-inhomogeneity are thus fundamental properties of all polycrystalline materials. Therefore, the study of preferred crystal orientations, or crystallographic texture, is of major interest in research and industrial applications. Analysis of the crystal texture is now a well-established tool for quality control and failure analysis in industry, as well as in academic research, because of the ready availability of commercial equipment and refined computer programs.

Download or read book Texture and Anisotropy of Polycrystals II written by Claude Esling and published by Trans Tech Publications Ltd. This book was released on 2005-07-15 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). Natural, as well as man-made, materials are often assumed to behave uniformly, exhibiting equal strength in all directions, because most of them have a polycrystalline structure. The anisotropy of the individual crystals, however, is smoothed out only in the presence of a large number of grains having a random distribution of orientations. In reality, there usually remains an anisotropy due to the existence of preferred orientations. Its magnitude depends upon the statistical distribution of grain orientations – the "crystallographic texture" or, more simply, the texture. –This governs the extremes, of the physical property of interest, which a single crystal of the material under consideration can exhibit in directional tests. Local variations in texture, as well as the arrangements and types of grain/phase boundaries, may give rise to inhomogeneous material properties. The texture also carries with it information on the history of a material’s processing, use and misuse. A knowledge of the texture is a prerequisite for all quantitative techniques of materials characterization, and is based upon the interpretation of diffraction-peak intensities. It is also necessary to model the relationships between microstructural features and physical or mechanical properties. Therefore, the texture is of great value for quality control in a wide range of industrial applications, and in basic materials research.

Download or read book Texture and Anisotropy of Polycrystals written by Flavio Deflorian and published by Trans Tech Publications Ltd. This book was released on 1998-02-16 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). Preferred crystal orientations and their statistical distribution – the polycrystalline 'texture' – are of major scientific interest and are of great importance in a wide range of industrial applications. The aim of this book is to monitor the rapid progress made in this field during the last few years. Texture analysis has expanded beyond its traditional domain of cubic metals and alloys to encompass virtually all crystalline, and even partially crystalline, materials - including natural as well as man-made ones such as geological samples, minerals, ceramics, polymers, composites, low-symmetry materials, thin films and layers. The main objectives are to obtain a better understanding and control of the properties of anisotropic materials (as related to bulk, grain or grain boundary structures), recrystallization and grain growth, deformation textures, and correlations between internal stress, composition and texture.

Download or read book Crystal Plasticity Finite Element Methods written by Franz Roters and published by John Wiley & Sons. This book was released on 2011-08-04 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the leading experts in computational materials science, this handy reference concisely reviews the most important aspects of plasticity modeling: constitutive laws, phase transformations, texture methods, continuum approaches and damage mechanisms. As a result, it provides the knowledge needed to avoid failures in critical systems udner mechanical load. With its various application examples to micro- and macrostructure mechanics, this is an invaluable resource for mechanical engineers as well as for researchers wanting to improve on this method and extend its outreach.

Download or read book Texture and Anisotropy of Polycrystals II written by C. Esling and published by . This book was released on 2005 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural, as well as man-made, materials are often assumed to behave uniformly, exhibiting equal strength in all directions, because most of them have a polycrystalline structure. The anisotropy of the individual crystals, however, is smoothed out only in the presence of a large number of grains having a random distribution of orientations. In reality, there usually remains an anisotropy due to the existence of preferred orientations. Its magnitude depends upon the statistical distribution of grain orientations - the crystallographic texture or, more simply, the texture. -This governs the extremes, of the physical property of interest, which a single crystal of the material under consideration can exhibit in directional tests. Local variations in texture, as well as the arrangements and types of grain/phase boundaries, may give rise to inhomogeneous material properties. The texture also carries with it information on the history of a material's processing, use and misuse. A knowledge of the texture is a prerequisite for all quantitative techniques of materials characterization, and is based upon the interpretation of diffraction-peak intensities. It is also necessary to model the relationships between microstructural features and physical or mechanical properties. Therefore, the texture is of great value for quality control in a wide range of industrial applications, and in basic materials research.

Download or read book Texture Development and Plastic Anisotropy in Deformed Polycrystals written by Toru Takeshita and published by . This book was released on 1987 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Orientations and Rotations written by Adam Morawiec and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: Essentially, Orientations and Rotations treats the mathematical and computational foundations of texture analysis. It contains an extensive and thorough introduction to parameterizations and geometry of the rotation space. Since the notions of orientations and rotations are of primary importance for science and engineering, the book can be useful for a very broad audience using rotations in other fields.

Download or read book Crystallographic Texture of Materials written by Satyam Suwas and published by Springer. This book was released on 2016-09-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a comprehensive and invaluable overview of the basics of crystallographic textures and their industrial applications, this book covers a broad range of both structural and functional materials. It introduces the existing methods of representation in an accessible manner and presents a thorough overview of existing knowledge on texture of metallic materials. Texture analysis has widespread use in many industries, and provides crucial input towards the development of new materials and products. There has been rapid growth in the science and art of texture analysis in the last few decades. Other topics addressed within this book include recent research on texture in thin films and non-metals, and the dependence of material properties on texture, and texture control in some engineering materials. This book constitutes an invaluable reference text for researchers and professionals working on texture analysis in metallurgy, materials science and engineering, physics and geology. By using content selectively, it is also highly accessible to undergraduate students.

Download or read book Introduction to Texture Analysis written by Olaf Engler and published by CRC Press. This book was released on 2009-11-16 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of Introduction to Texture Analysis: Macrotexture, Microtexture, and Orientation Mapping broke new ground by collating seventy years worth of research in a convenient single-source format. Reflecting emerging methods and the evolution of the field, the second edition continues to provide comprehensive coverage of the concepts, pra

Download or read book Plasticity and Textures written by W. Gambin and published by Springer Science & Business Media. This book was released on 2001-12-31 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book unifies, for the first time in book form, the main concepts of the physical and mathematical theory of plasticity. It presents the foundations of modern anisotropic plasticity, which link microscopic observations of texture formation with macroscopic properties of plastically anisotropic materials. Progress in metal-forming technologies has created the necessity to express the plastic yield process in terms of mathematics in order to apply computer methods. In addition new materials used in structural elements require a more detailed description of their physical structure. Amongst both metallurgists and mechanical designers, a strong tendency exists to formulate the scientific material in a common language. This book meets this request, although it has no ambitions to summarise the existing state of knowledge, only to combine the mathematical and physical approaches. The book is mainly addressed to mechanical designers. It is written for researchers who have a knowledge of physics and who want a mathematical tool for using this knowledge for a better description of technological processes. Moreover, it will interest metallurgists who want to have a more general view of their field of research, as well as for mechanical and civil engineers who want to apply some microstructural knowledge in their work. It could also be useful for graduate students at post-doctorate level who want to enter the field of plastic deformation of polycrystalline metals with texture.

Download or read book Plasticity and Textures written by W. Gambin and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: The classical, phenomenological theory of plastically anisotropic materials has passed a long way: from the work of von Mises presented in 1928, and the HilI formulation given in 1948, to the latest papers on large elastic-plastic deformations of anisotropic metal sheets. A characteristic feature of this approach is a linear flow rule and a quadratic yield criterion. Mathematical simplicity of the theory is a reason of its numerous applications to the analysis of engineering structures during the onset of plastic deformations. However, such an approach is not sufficient for description of the metal forming processes, when a metal element undergoes very large plastic strains. If we take an initially isotropic piece of metal, it becomes plastically anisotropic during the forming process, and the induced anisotropy progressively increases. This fact strongly determines directions of plastic flow, and it leads to an unexpected strain localization in sheet elements. To explain the above, it is necessary to take into account a polycrystalline structure of the metal, plastic slips on slip systems of grains, crystallographic lattice rotations, and at last, a formation of textures and their evolution during the whole deformation process. In short, it is necessary to introduce the plasticity of crystals and polycrystals. The polycrystal analysis shows that, when the advanced plastic strains take place, some privileged crystallographic directions, called a crystallographic texture, occur in the material. The texture formation and evolution are a primary reason for the induced plastic anisotropy in pure metals.

Download or read book Preferred Orientation in Deformed Metal and Rocks written by Hans Rudolf Wenk and published by Elsevier. This book was released on 2013-10-22 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides an introduction to the texture analysis of deformed materials and explores methods of determining and interpreting the preferred orientation of crystals in deformed polycrystalline aggregates.**The book reviews: 1) the techniques, procedures, and theoretical basis for the accumulation and analysis of orientation data; 2)the processes by which polycrystals deform and the microstructural mechanisms responsible for the development of the preferred orientation; 3) the textures in specific systems and application of principles to the solution of specific problems.**With a combination of metallurgic and geologic applications, Preferred Orientation in Deformed Metals and Rocks: An Introduction to Modern Texture Analysis will be an important source book for students and researchers in materials science, solid state physics, structural geology, and geophysics.**FROM THE PREFACE: Determination and interpretation of the preferred orientation of crystals in deformed polycrystalline aggregates (in this volume also referred to as texture) has been of longstanding concern to both materials scientists and geologists. A similar theoretical background--such as the dislocation theory of crystal plasticity--has been the basis of understanding flow in metals and rocks; and similar determinative techniques--including microscopy and x-ray diffraction--have been used to study textures and microstructures. Whereas many of the fundamental principles have been established early this century by scientists such as Jeffery, Sachs, Sander, Schmid, Schmidt, and Taylor, only in recent years has knowledge reached a level that provides a quantitative framework which has replaced a largely phenomenological approach. This is expressed in the sudden new emphasis on textural studies, as documented by the large number of recent publications.**This volume contains material to serve as an introduction for those who wish to enter this field as well as reviews for those who are already engaged in advanced research....**The book is divided into three parts. The first (Chapters 2*b17) deals with techniques, procedures, and theoretical bases for the accumulation and analysis of orientation data. The second (Chapters 8*b112) introduces processes by which polycrystals deform and the microstructural mechanisms responsible for the development of the preferred orientation. All those chapters emphasize basic principles and apply to metals as well as to minerals. The third part (Chapters 13*b126) illustrates textures in specific systems and the application of the principles set out in the earlier chapters to the solution of specific problems. Readers of these chapters will quickly become aware that metals have been more exhaustively studied than minerals; but they will also realize that, because of their structural symmetry, metals are in general much simpler than rocks and that the intepretation of metal textures is less involved. An extensive list of relevant references provides access to much of the original literature on textures....

Download or read book The Mechanics of Crystals and Textured Polycrystals written by William F. Hosford and published by Oxford University Press, USA. This book was released on 1993 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is an introduction to crystal mechanics and includes theories of polycrystalline and continuum plasticity for textured materials. It presents a simple and concise review of the mechanics of crystals and polycrystals and gives methods for solving problems related to the plastic deformation of metals. Along with the basic concepts, essential for the student or nonspecialist, much of the author's pioneering work is emphasized and is presented for the first time in book form. Focussing on plasticity, the text includes a chapter on elasticity, which introduces the reader to transformations of stress and strain from one set of axes to another. The effects of anisotropic thermal expansion on polycrystals are also discussed. The concepts of crystal plasticity are extended to predict the behavior of textured polycrystals and the predicted behavior is related to continuum theories of yielding. The author demonstrates that to solve engineering problems, it is possible to bypass continuum mechanics completely, and use crystallographic analyses directly. With our rapidly growing computer power, such an approach to engineering problems may eventually become routine. Sample problems have been included in the first few chapters and Appendix I to illustrate points and show approaches to solving problems. For novices, helpful appendices have been included to cover fundamentals of geometry, crystallography, and mechanics. Students of materials science, mechanics, crystallography, and engineering may use this textbook for part of a general course on the mechanical behavior of metals.

Download or read book Mantle Convection and Surface Expressions written by Hauke Marquardt and published by John Wiley & Sons. This book was released on 2021-07-07 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: A multidisciplinary perspective on the dynamic processes occurring in Earth's mantle The convective motion of material in Earth's mantle, powered by heat from the deep interior of our planet, drives plate tectonics at the surface, generating earthquakes and volcanic activity. It shapes our familiar surface landscapes, and also stabilizes the oceans and atmosphere on geologic timescales. Mantle Convection and Surface Expressions brings together perspectives from observational geophysics, numerical modelling, geochemistry, and mineral physics to build a holistic picture of the deep Earth. It explores the dynamic processes occurring in the mantle as well as the associated heat and material cycles. Volume highlights include: Perspectives from different scientific disciplines with an emphasis on exploring synergies Current state of the mantle, its physical properties, compositional structure, and dynamic evolution Transport of heat and material through the mantle as constrained by geophysical observations, geochemical data and geodynamic model predictions Surface expressions of mantle dynamics and its control on planetary evolution and habitability The American Geophysical Union promotes discovery in Earth and space science for the benefit of humanity. Its publications disseminate scientific knowledge and provide resources for researchers, students, and professionals.

Download or read book The Plastic Anisotropy in Single Crystals and Polycrystalline Metals written by Wojciech Truszkowski and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reader shall find in the offered monograph a systematic presentation of scientific effects in the field of anisotropy studies reached by the author and his collaborators in the period of recent four decades: published and discussed in a number of papers and conference contributions. The central construction line of discussion is to be sought in the full and comprehensive analysis of ret:) function defining the anisotropy coefficient varying during the tensile test. No doubt, this function can be considered as a nutshell carrier ofcomprehensive information about the essential features influencing the directionality of the studied material's plasticity. The function also provides the basis to elaborate methods used in the determination of such characteristics. In the historical presentation of literature in the field of plastic anisotropy, the original input was offered by W.M. Baldwin Jr., already in 1946, who observed the differentiated strain rates in three mutually perpendicular directions of the sample subjected to static tensile test. In the following years, further and expanded analysis of the problem was undertaken by Lankford, Hill, Gensamer, Jackson, Low and Smith.

Download or read book Microstructural Design of Advanced Engineering Materials written by Dmitri A. Molodov and published by John Wiley & Sons. This book was released on 2013-07-17 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: The choice of a material for a certain application is made taking into account its properties. If, for example one would like to produce a table, a hard material is needed to guarantee the stability of the product, but the material should not be too hard so that manufacturing is still as easy as possible - in this simple example wood might be the material of choice. When coming to more advanced applications the required properties are becoming more complex and the manufacturer`s desire is to tailor the properties of the material to fit the needs. To let this dream come true, insights into the microstructure of materials is crucial to finally control the properties of the materials because the microstructure determines its properties. Written by leading scientists in the field of microstructural design of engineering materials, this book focuses on the evolution and behavior of granular microstructures of various advanced materials during plastic deformation and treatment at elevated temperatures. These topics provide essential background and practical information for materials scientists, metallurgists and solid state physicists.